CCGT 04T104 TH10 Wendeplatten - Tungaloy

Combining the TH10 uncoated carbide grade with an ISO‑specified rhombic geometry and a 0.4 mm corner radius ensures low cutting forces and consistently clean surfaces in turning operations; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the technical team for application advice

CCGT CCGT04T104 TH10 turning insert (ISO rhombic, 80°) — Tungaloy

A CCGT04T104 TH10 turning insert designed for external and internal turning, offering a low‑force uncoated cutting edge suited to non‑ferrous materials and precision finishing

• ISO‑standard rhombic insert, 80° cutting angle
• Uncoated carbide TH10 for low cutting forces
• 0.4 mm corner radius for consistent finish
• Cylindrical hole with 40°–60° countersink

Lower energy input and cleaner surface finish for turning

The combination of the TH10 grade and an uncoated carbide edge is engineered to minimise cutting forces, which directly reduces spindle load and heat generation during machining. For applications in non‑ferrous materials and softer alloys, this results in a cleaner surface finish and less burr formation. The rhombic ISO geometry with an 80° main cutting angle delivers a dependable compromise between strength and accessibility, helping to maintain cycle times while protecting the cutting edge.

Stable clamping and repeatable seat for secure operations

Compatibility with toolholders is determined by the insert’s form, clearance angle and tolerance class; the cylindrical hole with 40°–60° countersink and a thickness of 1.59 mm provide a reliable mechanical seat that reduces micro‑movement and improves repeatability. Because clamping accuracy influences tool life and dimensional stability, the insert’s ISO conformity ensures predictable behaviour when paired with standard outside holders and boring bars, lowering the risk of setup variance and rework.

Controlled chip flow and predictable cutting behaviour

The single‑sided chipbreaker design works in concert with the uncoated cutting edge to shape chips for safer evacuation and consistent tool contact. A 0.4 mm corner radius supports edge strength while producing consistent surface waviness suitable for finishing passes. For operations where low cutting forces and good surface integrity are priorities, the geometry helps to avoid chatter and minimise feed‑induced marks, delivering dependable results with fewer interventions.

Versatility in turning tasks and practical selection guidance

Designed for both external and internal turning, the insert performs best where a sharp, uncoated edge is advantageous—such as aluminium, copper alloys and mixed non‑ferrous batches. Selection should consider workpiece stability and required finishes: match the single‑sided chipbreaker and TH10 grade to the material and machining conditions for optimised productivity. For less rigid setups or heavy interrupted cuts, choose a more robust geometry or a different grade; for fine finishing, the low cutting forces of this insert reduce the tendency to rub and deposit built‑up edge.

Contact Metav Werkzeuge for availability and application advice on Tungaloy TH10 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with specific holders and materials

Technical data

• Article number: 6862164
• Manufacturer SKU: TUN6862164
• SKU: 6862164-Tungaloy
• Model series: ISO‑Drehwendeschneidplatten
• Material: Hartmetall
• Application: Drehen

Key dimensions

• Cutting angle: 80°
• Clearance (relief) angle: 7°
• Plate thickness: 1.59 mm
• Plate size: 04
• Corner radius: 0.4 mm

Special features

• ISO rhombic plate (CCGT04T104)
• Grade: TH10 (uncoated carbide)
• Hole: with cylindrical hole and one‑sided countersink (40°–60°)
• Chipbreaker: single‑sided
• Plate form: rhombic

FAQ

Which holders are compatible with this insert? The CCGT04T104 TH10 insert fits holders designed for ISO rhombic CCGT plates; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness, so verify the holder matches the ISO geometry.

For which materials is the TH10 grade recommended? The TH10 uncoated carbide grade is aimed at non‑ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and a clean surface finish.

How does the 0.4 mm corner radius influence surface quality? A 0.4 mm corner radius increases edge strength while maintaining a fine surface profile, helping to reduce feed marks and produce a consistent finish on turning passes.

What advantage does the cylindrical hole with countersink provide? The cylindrical hole plus 40°–60° countersink ensures secure clamping and accurate seating in compatible toolholders, improving repeatability and reducing the risk of insert movement during machining.

Is this insert suitable for interrupted cuts or heavy machining? The CCGT04T104 TH10 insert is optimised for low cutting forces and finishing in non‑ferrous materials; for heavy interrupted cuts or highly unstable setups, a more robust geometry or different grade is recommended.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.