VBMT 110302 NS9530 Wendeplatten - Tungaloy

Benefit from precise finishing, low cutting forces and consistent chip control provided by the NS9530 grade. The combination of a 0.2 mm corner radius and a rhombic ISO VBMT form ensures reliable surface quality and repeatable results; order the insert directly via Metav Werkzeuge or consult their specialists for application advice.

VBMT 110302 NS9530 — ISO turning insert VBMT110302-TSF for turning, Tungaloy

A VBMT110302-TSF NS9530 indexable insert for turning, engineered as a finishing grade for steel with an emphasis on sharp cutting edges, low cutting forces and excellent surface finish.

• VBMT ISO 110302 form, 35° diamond
• Uncoated cermet NS9530 for fine finishing
• 0.2 mm corner radius for precision
• 3.18 mm plate thickness for stability

Consistent finishing and surface quality for serial production

The uncoated cermet grade NS9530 is optimised for finishing operations on steel, delivering a sharp cutting edge and reduced cutting forces that translate directly into superior surface finish and reduced tool marks. As a finishing grade, the insert is best employed at continuous cutting conditions and small depths of cut; this minimises vibration and maximises part-to-part consistency. The material chemistry of the cermet favours low built-up edge formation, which maintains component tolerances for longer runs and reduces downstream rework.

Stable geometry and holder compatibility for secure clamping

The ISO VBMT form with a 35° diamond geometry and a 0.2 mm corner radius offers a predictable contact area with the workpiece, improving tool life and dimensional stability. The insert is supplied in the VBMT110302-TSF format and features a cylindrical hole with single-sided countersink (40°–60°) for secure seating in compatible holders. Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; verify holder specifications against the ISO designation to ensure optimal clamping and repeatable positioning in the toolholder system.

Practical grade characteristics and machining guidance

NS9530 is an uncoated cermet finishing grade intended for low-to-moderate cutting speeds with continuous cuts and small feed rates; this yields an excellent surface finish while keeping cutting forces modest. The TSF chipbreaker is matched to the grade for controlled chip formation when machining steels under stable conditions. For best results, select a holder and clamping set that match the insert’s geometry and thickness; maintain stable setup and small depth of cut during finishing passes to exploit the grade’s strengths and extend tool life.

For precise finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for ordering and tailored application support via info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6945286

Facts

• Manufacturer SKU: TUN6945286
• SKU: 6945286-Tungaloy
• Model series: ISO turning indexable inserts
• ISO designation: 110302
• Size: 11 mm
• Plate thickness: 3.18 mm
• Corner radius: 0.2 mm
• Relief angle: 5°
• Shape: rhombic (VBMT)
• Insert angle: 35°

Special features

• Grade: NS9530 (uncoated cermet)
• Chipbreaker: TSF
• Hole style: cylindrical hole + single-sided countersink (40°–60°)
• Material: carbide
• Typical application: finishing turning of steel
• System components: ISO insert, matching external holder or boring bar, shim/clamping set and replacement screw

FAQ

What chip control can be expected from this insert?
The TSF chipbreaker combined with the VBMT110302-TSF NS9530 grade produces compact, controllable chips in continuous finishing cuts on steel, reducing the risk of entanglement and improving process stability.

Is this insert suitable for interrupted cuts?
The NS9530 finishing grade is optimised for continuous cuts; for heavily interrupted machining, a tougher grade or a different chipbreaker should be considered instead of the VBMT110302-TSF NS9530.

Which holders are compatible with the VBMT110302-TSF format?
Compatibility is determined by form, relief angle, tolerance class, fastening and thickness; holders designed for VBMT 110302 inserts with a 35° geometry and matching clamping provisions will provide secure seating.

Can the NS9530 insert be used on stainless steels?
NS9530 is primarily intended for steel finishing in continuous cuts; if machining stainless steels, evaluate cutting conditions and consider a grade tailored for work-hardening alloys.

What is the recommended application for this insert?
The VBMT110302-TSF NS9530 insert is recommended for finishing external and internal turning operations where a fine surface finish and low cutting forces are priorities.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.