VCMT 160408 T6215 Wendeplatten - Tungaloy

Take advantage of the CVD‑coated T6215 carbide grade and the ISO‑standard VCMT form for consistent, wear‑resistant performance when turning stainless steel; compatibility with the toolholder is determined by form, clearance angle and plate thickness. Order the VCMT160408‑TM T6215 directly via Metav Werkzeuge or contact our consultants for holder matching and availability.

VCMT160408-TM T6215 — ISO turning insert, CVD‑coated carbide for stainless‑steel turning by Tungaloy

VCMT160408-TM T6215 is an ISO‑standard rhombic insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions

• CVD‑coated carbide grade T6215 for stainless steel
• 0.8 mm corner radius for controlled chip formation
• Rhombic ISO insert, 16 mm, 7° clearance
• Cylindrical hole with one-sided countersink

Reliable wear resistance for stable stainless‑steel turning

The CVD‑coated carbide in grade T6215 is formulated for wear resistance when machining stainless steel under stable or mildly interrupted cuts. The chemical vapour deposition (CVD) coating creates a hard, adherent layer that reduces flank wear and heat‑related adhesion—this means longer intervals between indexings and fewer unexpected tool changes. The integrated chipbreaker TM promotes consistent chip control, reducing the risk of built‑up edge and improving surface finish without needing complex process adjustments. For operations where repeatability and uptime are key, the combination of substrate and coating offers a measurable improvement in productive tool life.

Precise geometry and secure clamping for predictable results

The ISO‑format rhombic geometry (designation 160408) with a 0.8 mm corner radius and 7° clearance ensures predictable engagement and cutting forces during turning. The insert thickness of 4.76 mm and the 16 mm inscribed circle fit standard ISO holders; the insert features a cylindrical hole with a one‑sided countersink (40°–60°) for positive, repeatable clamping. Because holder compatibility depends on form, free angle, tolerance class, fastening and plate thickness, the system is normally assembled from an ISO insert, a matching external holder or boring bar, a shim/locking set and replacement screws—this modular approach simplifies replacement and keeps machine downtime to a minimum.

Improve throughput and lower total machining cost

Adopting inserts with stable cutting behaviour and optimised chip control leads directly to higher productivity and lower tooling cost per part. The T6215 grade is tailored for productive cutting of stainless steels: the coating and substrate combination reduces flank wear and preserves edge integrity, while the chipbreaker geometry improves evacuation of chips in both external and internal turning. Less frequent tool changes and improved surface quality reduce rework and machine idle time, contributing to a better overall cost‑benefit ratio for batch and continuous production runs. For shops looking to standardise tooling for stainless‑steel turning, these inserts offer a solid balance of tool life and process reliability.

For reliable stainless‑steel turning with proven wear resistance, request the Tungaloy VCMT160408‑TM T6215 from Metav Werkzeuge or contact our technical team to confirm holder compatibility and current stock levels.

Technical data

• Article number: 6945325
• Manufacturer SKU: TUN6945325
• Label: VCMT160408‑TM T6215
• Manufacturer: Tungaloy

Facts

• Corner radius: 0.8 mm
• Inscribed circle / size: 16 mm
• Plate thickness: 4.76 mm
• Clearance angle: 7°
• Geometry code: 160408
• Lead/approach angle: 35°

Special features

• CVD‑coated carbide, grade T6215
• Chipbreaker type TM
• Rhombic plate form
• Cylindrical hole with one‑sided countersink (40°–60°)
• ISO turning insert series for external and internal turning
• Application: turning of stainless steel under stable to slightly interrupted conditions

FAQ

What materials is this insert designed for?
The VCMT160408‑TM T6215 is designed primarily for stainless steel turning; the T6215 CVD‑coated carbide provides wear resistance suitable for stable and lightly interrupted cuts.

Which insert geometry and size does it use?
This is a rhombic ISO insert with the geometry code 160408, an inscribed circle of 16 mm and a plate thickness of 4.76 mm, offering a 0.8 mm corner radius.

How does the chipbreaker TM affect machining?
The TM chipbreaker is engineered for improved chip control during turning of stainless steel, promoting reliable chip formation and evacuation to enhance surface finish and reduce rework.

What should be checked for holder compatibility?
Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; consult holder specifications to ensure correct fit for the VCMT160408‑TM.

Is this an original Tungaloy product and where can it be ordered?
The insert is an original Tungaloy ISO turning insert (VCMT160408‑TM T6215, SKU 6945325‑Tungaloy) and can be requested via Metav Werkzeuge for availability and delivery options.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.