CPMT 060208 AH8015 Wendeplatten - Tungaloy

Take advantage of the combination of wear-resistant PVD coating, stable AH8015 carbide grade and ISO compatibility for consistent turning performance and predictable tool life; order directly via Metav Werkzeuge or consult the team for application support.

CPMT060208 AH8015 ISO turning insert for general-purpose turning — Tungaloy

The CPMT060208 AH8015 is an ISO‑conforming rhombic turning insert designed for external and internal turning of heat‑resistant alloys in general machining applications

• PVD-coated carbide AH8015 for heat-resistant alloys
• ISO 060208 rhombic insert, 80° geometry
• Single-sided chipbreaker, cylindrical hole with countersink
• 0.8 mm nose radius and 2.38 mm plate thickness

Consistent cutting performance for heat‑resistant alloys

The PVD coating applied to this carbide grade delivers a balanced combination of wear resistance and edge stability, making it suitable for the machining of difficult, heat‑resistant alloys. The AH8015 grade is optimised for general‑purpose turning where a compromise between tool life and reliable edge strength is required. In practice, this means fewer insert changes and more predictable process windows when machining stainless or nickel‑based materials, contributing directly to improved component throughput and reduced downtime.

Secure seating and broad holder compatibility reduce setup time

Compatibility with toolholders is governed by the insert form, relief angle, tolerance class, fastening method, size and thickness. The rhombic shape with an 80° main angle and an 11° relief angle ensures a widely compatible geometry for standard ISO clamping systems. The insert’s cylindrical central hole with a 40°–60° one‑sided countersink allows secure fixing and repeatable location in a matching clamp or shim set. This mechanical reliability reduces rework from improper clamping and simplifies the selection of a matching external holder or boring bar in mixed production environments.

Small radius and chip control for improved surface finish

A 0.8 mm nose radius together with a single‑sided chipbreaker delivers controlled chip formation and a consistent surface texture on turned parts. The moderate nose radius helps achieve good surface quality without excessive cutting forces, while the chipbreaker directs swarf away from the cutting zone, aiding swarf evacuation and process stability. For shops processing component batches where surface finish and process repeatability matter, this insert affords an efficient balance between finish and productivity.

Practical system benefits that support productive machining

The insert forms part of a complete ISO turning system: the plate itself, a matching external holder or boring bar, and the appropriate shim/clamp set and replacement screws. The 2.38 mm plate thickness enhances stiffness at the cutting edge and contributes to vibration dampening during interrupted cuts. Together with the ISO 060208 format, these attributes simplify tool management on the shop floor and help standardise tooling across similar turning tasks, supporting lean tooling inventories and quicker tool changeovers.

Choose the Tungaloy AH8015 grade for reliable turning of heat‑resistant alloys and contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6951142
• SKU: 6951142-Tungaloy
• Manufacturer SKU: TUN6951142
• Model series: ISO-Drehwendeschneidplatten
• WPL designation: CPMT060208

Facts

• Geometry angle: 80°
• Relief angle: 11°
• Nose radius: 0.8 mm
• Plate thickness: 2.38 mm
• Plate size: 06
• ISO code: 060208

Design and application

• Material: carbide
• Coating: PVD
• Grade: AH8015
• Chipbreaker: single-sided
• Hole: with hole
• Hole style: cylindrical hole + one-sided countersink (40°–60°)
• Plate shape: rhombic
• Application: turning
• Typical uses: external and internal turning
• System composition: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws

FAQ

What materials is this insert best suited for?
The insert in AH8015 grade with PVD coating is intended for machining heat‑resistant alloys; its balanced wear resistance and edge stability make it suitable for stainless and nickel‑based materials as well as other demanding steels.

How does the insert locate in the holder?
Clamping relies on the rhombic form, the central cylindrical hole with a one‑sided countersink and the ISO geometry; correct matching of holder form, tolerance class and clamping set ensures repeatable location.

Can this insert be used for both roughing and finishing?
Yes, the combination of a 0.8 mm nose radius and a single‑sided chipbreaker provides sufficient versatility for both light finishing passes and more aggressive material removal, depending on cut parameters and holder rigidity.

Which system components are required to fit the insert?
A compatible external holder or boring bar, a suitable shim/clamp set and the correct replacement screws are required to assemble the ISO turning system for secure and repeatable operation.

What distinguishes AH8015 from other grades?
AH8015 is a PVD‑coated carbide grade optimised for a balance between edge strength and wear resistance, making it a first choice for general machining of heat‑resistant alloys where consistent tool life is important.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.