CCGT 04T101 SH7025 Wendeplatten - Tungaloy

Take advantage of a coated carbide grade engineered for stable cutting performance and an ISO‑compliant rhombic geometry for straightforward integration into standard turning tool systems; the combination of wear‑resistant material and compact 0.1 mm nose radius supports precise finishing and reliable chip control. Order directly via Metav Werkzeuge or consult the team for application advice.

CCGT04T101 SH7025 indexable turning insert for turning (Tungaloy)

The CCGT04T101 SH7025 is an ISO‑standard rhombic indexable insert for external and internal turning, offering an 80° geometry, a 0.1 mm nose radius and a coated cemented carbide grade optimised for variable engagement conditions.

• ISO CCGT 04T101 geometry, 80° rhombic
• Coated carbide grade SH7025 for tough conditions
• 0.1 mm nose radius for fine finishing
• Compatible with standard indexable holders, with hole

Precise, ISO‑based construction for reliable turning results

The insert is manufactured to an ISO‑standard designation and is therefore compatible with matching ISO indexable holders when form, clearance, tolerance class, attachment and thickness are respected. The cutting material is coated carbide, grade SH7025, selected for its balance of edge stability and wear resistance; this combination reduces flank wear in interrupted cuts and during unstable engagement. Integration into a standard tool system is straightforward: a suitable clamp or screw, a support pad and the correct holder form ensure repeatable mounting and consistent geometry at the cutting line, which is essential for predictable process control.

Geometry and hole design optimise finishing and versatility

The rhombic plate offers an 80° geometry that suits a range of operations from general turning to light profiling, while the 0.1 mm nose radius supports fine surface finishes without compromising strength at the cutting edge. A 7° clearance avoids rubbing on the flank and helps maintain low cutting temperatures. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) which eases secure clamping and positional indexation in compatible holders. The single‑sided chipbreaker provides controlled chip formation for a variety of steels and non‑ferrous materials when the correct chipbreaker and grade are chosen.

Benefits in day‑to‑day production: edge stability and process security

Designed for turning where entry conditions vary, the grade delivers a stable cutting edge even on smaller tool setups and during intermittent cuts. The coated carbide surface supports longer tool life and consistent surface quality, reducing the need for frequent index changes. Compatibility with standard holders means the insert can be quickly introduced into existing toolsets; ensuring the correct pad and fastening method will preserve the intended geometry and enable repeatable setups across batches, helping to keep cycle times steady and parts within tolerance.

Practical advice for selection and set‑up

Select the chipbreaker and grade that match the workpiece material and the required finish; for mixed or interrupted cuts the SH7025 grade is a pragmatic choice because of its edge stability. Verify holder compatibility by comparing the insert form, clearance angle, tolerance class, attachment type, nominal size and thickness (1.59 mm). Use the correct clamping screw and support pad to avoid distortion when tightening. Regular inspection of the cutting edge and correct indexing practice will extend tool life and preserve component quality without overcomplicating the process.

Contact Metav Werkzeuge for availability and tailored application advice — specify holder type and workpiece material when enquiring via info@metav-werkzeuge.com or call +49 2822 7131930.

Technical Data

• Article number: 6967383
• SKU: 6967383-Tungaloy
• Manufacturer SKU: TUN6967383
• Model series: ISO-Drehwendeschneidplatten
• Designation (ISO): CCGT04T101

Facts

• Included angle: 80°
• Clearance angle: 7°
• Nose radius: 0.1 mm
• Plate thickness: 1.59 mm
• Plate size: 04
• Hole: with hole
• Countersink angle: 40°–60°

Special features

• Coated carbide cutting material
• Grade: SH7025
• Rhombic plate form
• Single-sided chipbreaker
• Cylindrical hole with one-sided countersink
• For external and internal turning
• Compatible with ISO indexable holders

FAQ

What materials is this insert suited for?
The CCGT04T101 SH7025 insert is designed as a general‑purpose turning grade; the SH7025 coating and cemented carbide substrate suit a wide range of steels and mixed cutting conditions, offering good edge stability for intermittent engagement.

How is holder compatibility ensured?
Compatibility depends on matching the insert form, clearance angle, tolerance class, attachment type, nominal size and thickness; use the ISO designation CCGT04T101 and verify the holder accepts a plate with a cylindrical hole and one‑sided countersink.

Can the insert be used for internal turning?
Yes, the geometry and small 0.1 mm nose radius make the insert suitable for both external and internal turning operations when fitted into the appropriate internal holder.

What are the key mounting parts required?
A matching indexable holder, support pad or clamping set, and the correct clamping screw ensure stable fixation; the insert’s cylindrical hole and countersink are designed for secure seating in standard clamps.

How does the chipbreaker affect performance?
The single‑sided chipbreaker promotes controlled chip formation and improved surface finish; choose a chipbreaker and feed value that correspond to the workpiece material and machining strategy.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.