WNGU 060308 AH130 Wendeplatten - Tungaloy

Take advantage of the combination of long tool life, precise geometry and reliable clamping for consistent milling performance; order the insert via Metav Werkzeuge or consult our specialists for technical matching.

WNGU 060308 AH130 — Tungaloy milling insert, PVD-coated carbide, trigon 80°

The WNGU060308 AH130 Tungaloy insert is a PVD-coated carbide trigon insert for use in Tungaloy milling systems, designed for face, shoulder, slot, high-feed and contour milling where a sharp, wear-resistant cutting edge is required.

• PVD-coated carbide AH130 for wear resistance
• Trigon insert, 80° cutting edge
• 0.8 mm corner radius for precise surface finish
• Double-sided chipbreaker; hole with countersink

Reliable machining through PVD-coated grade AH130

The PVD-coated grade AH130 provides a consistently sharp, wear-resistant edge that keeps cutting forces predictable and reduces edge chipping during interrupted cuts. When used in a matched tooling assembly, this PVD-treated carbide substrate extends tool life and supports higher feed rates compared with uncoated grades. The result is fewer tool changes and lower process variability, which benefits cycle-time-sensitive production environments and improves overall machining throughput.

Geometry engineered for repeatable surface quality

The trigon form and 80° cutting angle deliver a robust cutting geometry that balances strength and accessibility in shoulder and face milling. The trigon shape and the specified 0.8 mm corner radius help produce consistent contour transitions and an improved surface finish, while the plate thickness of 3.18 mm contributes to positional stability in the pocket. The insert’s 0.8 mm corner radius is suitable for general finishing and semi-finishing tasks, enabling predictable scallop heights and easier downstream finishing operations.

Stable chip control and secure clamping for process security

A double-sided chipbreaker combined with the insert’s central feature of a cylindrical hole and double-sided countersink (40°–60°) improves chip formation and evacuation in both climb and conventional milling directions. The hole configuration ensures secure clamping and repeatable seating in the cutter head; as part of a complete tooling milling systems setup (milling body, insert, clamping screw and, if required, shim), this configuration reduces the risk of insert movement and supports stable metal removal, even under intermittent cutting conditions.

Practical compatibility and application guidance

This indexable insert is intended for use in Tungaloy milling systems where seat geometry and cutter body accept the WNGU form; the designation corresponds to ISO 060308. Typical applications include planing, shoulder milling, slotting, high-feed strategies and contour work, depending on the chosen cutter family. When integrating the insert into an existing tooling set, ensure the cutter pocket and clamp match the WNGU seat and that recommended cutting data for PVD-coated carbide are followed to exploit the grade’s wear resistance and toughness.

For technical matching or to procure the original Tungaloy WNGU060308 AH130 insert, contact Metav Werkzeuge for personalised advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6987250
• SKU: 6987250-Tungaloy
• Manufacturer SKU: TUN6987250
• Designation: WNGU060308 AH130
• Material: carbide
• Coating / grade: AH130 PVD

Core dimensions

• ISO designation: 060308
• Size: 06
• Plate thickness: 3.18 mm
• Cutting angle: 80°
• Relief angle: 0°
• Corner radius: 0.8 mm

Special features

• Trigon plate form
• Double-sided chipbreaker
• Cylindrical hole with double-sided countersink (40°–60°)
• With hole for secure clamping
• Suitable for face, shoulder, slot, high-feed and contour milling
• System components: milling body, indexable insert, clamping screw, possible shim

FAQ

What applications suit this insert best?
This WNGU060308 AH130 Tungaloy insert is suited to face, shoulder, slot, high-feed and contour milling in a matched Tungaloy milling system.

Is the insert suitable for interrupted cuts and mixed materials?
The AH130 PVD-coated carbide is designed for wear and fracture resistance, making the insert appropriate for interrupted cuts and a broad range of workpiece materials within milling operations.

How does the hole and countersink affect clamping?
The cylindrical hole with a double-sided countersink ensures stable positioning and secure clamping in compatible cutter heads, improving repeatability for the WNGU060308 AH130 insert.

What does the ISO code 060308 indicate?
ISO 060308 refers to the insert size and nose radius series; in this case it matches the insert form and the specified 0.8 mm corner radius for the WNGU060308 AH130.

Can the insert be used on any cutter body?
The insert must be used in cutter bodies designed for the WNGU seat; plate seat, geometry and cutter body must technically match to ensure proper function.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.