CCMT 060204 GT9530 Wendeplatten - Tungaloy

Take advantage of a wear-resistant, coated cermet grade (GT9530) and the ISO CCMT060204 form for consistent finishing and extended tool life; the rhombic geometry with a corner radius of 0.4 mm provides fine surface quality while the standardised form ensures straightforward holder compatibility. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice.

CCMT 060204 GT9530 – Indexable turning insert (coated cermet) by Tungaloy, 80° included angle

CCMT060204 GT9530 is an ISO indexable turning insert designed for finishing and light universal turning of steel, offering a stable cutting edge and enhanced surface quality.

• ISO CCMT 06 size, rhombic form
• Coated cermet grade GT9530
• Single-sided chipbreaker for finishing
• 7° clearance, 80° included angle

Higher surface quality with longer tool life

The coated cermet composition GT9530 combines the abrasion resistance of cermet coatings with a formulation optimised for finishing. This results in longer tool life and consistently improved surface finishes when machining steel under stable conditions. The small corner radius 0.4 mm reduces cutting forces and helps achieve fine part aesthetics while still allowing for light stock removal. For production environments where repeatable part quality and reduced rework are priorities, this insert provides a clear efficiency advantage through fewer tool changes and more predictable wear behaviour.

Standardised form for reliable holder compatibility

As an ISO-designated CCMT insert, the geometry follows established standards to ensure compatibility with a wide range of external holders and boring bars. The ISO CCMT060204 designation describes the rhombic shape and size, while the 2.38 mm thickness and the cylindrical hole with single-sided countersink (40°–60°) determine the correct clamping interface. Matching the insert to a holder requires checking form, clearance angle, tolerance class, fastening method, size and thickness; once these are aligned, the insert delivers repeatable positioning and stable cutting performance, reducing setup time and the risk of incorrect mounting.

Application guidance and process benefits

This insert is intended for turning operations where a combination of superior surface finish and competitive tool life is required. The single-sided chipbreaker is optimised for finishing to light universal turning in steel, promoting controlled chip formation when the machining setup is rigid and cutting parameters are consistent. Selecting this grade supports higher first-pass quality, which in turn lowers downstream polishing or grinding needs. For flexible production runs, pairing the insert with a suitably rigid holder and consistent clamping practice yields dependable results and helps maintain cycle-time stability.

For advice on selecting the correct insert grade or verifying compatibility with specific holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our technical consultants will assess the application and recommend the optimal solution.

Technical data

• Article number: 6998293
• SKU: 6998293-Tungaloy
• Manufacturer SKU: TUN6998293
• Model series: ISO turning indexable inserts

Core specifications

• ISO designation: CCMT060204
• Corner radius: 0.4 mm
• Included angle: 80°
• Clearance angle: 7°
• Thickness: 2.38 mm
• Size: 06

Special features

• Coated cermet grade GT9530
• Rhombic insert form, with hole
• Cylindrical hole + single-sided countersink (40°–60°)
• Single-sided chipbreaker, finishing to light universal turning
• Intended application: turning of steel under stable machining conditions

FAQ

Which materials is this insert suited for?
The CCMT060204 GT9530 insert from Tungaloy is optimised for machining steel, offering wear-resistant performance for finishing and light universal turning tasks.

What is the effect of the 0.4 mm corner radius?
A corner radius of 0.4 mm reduces cutting forces and supports finer surface finishes; the CCMT060204 geometry with this radius is suitable for delicate finishing passes and reduced risk of chatter when held in a rigid setup.

How is the insert clamped in the holder?
The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping; correct holder selection requires matching form, size and thickness to ensure stable positioning of the CCMT060204 GT9530 insert.

Is GT9530 a good choice for longer runs?
Yes; the coated cermet GT9530 provides improved wear resistance and a stable cutting edge, contributing to extended tool life in repeatable, stable machining conditions.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.