CCMT 060208 GT9530 Wendeplatten - Tungaloy

Take advantage of the combination of consistent surface quality, extended tool life under stable conditions and precise ISO compatibility for reliable turning operations; order with expert advice via Metav Werkzeuge or request tailored recommendations from the consultancy team.

CCMT060208 GT9530 Tungaloy turning insert — coated cermet, 0.8 mm nose radius

The CCMT060208 GT9530 is an ISO-format rhombic turning insert optimised for finishing and light universal turning of steel components.

• Rhombic ISO CCMT geometry
• Coated cermet GT9530 grade
• 0.8 mm nose radius for fine finishing
• Cylindrical hole with single-sided countersink 40°–60°

High-precision finishing with lasting wear resistance

The CCMT060208 comes in a coated cermet grade (GT9530) developed for wear resistance and a superior surface finish on steel. Cermet combines ceramic and metallic constituents to provide a hard, abrasion-resistant cutting edge while maintaining enough toughness to avoid premature chipping during steady operations. The 0.8 mm nose radius supports fine contouring and improved micro-geometry, which translates into fewer rework passes and a reliable part appearance. For shops aiming to reduce non-productive time, the result is a measurable reduction in changeovers and consistent part quality when machining under stable set-up conditions.

Secure clamping and straightforward holder compatibility

Designed as an ISO CCMT060208 insert with a rhombic outline and a through-hole plus a single-sided countersink (40°–60°), the insert fits standard CCMT-compatible external holders and boring bars. Compatibility to a specific holder is determined by form, 7° relief angle, tolerance class, fastening method, size and 2.38 mm plate thickness. The system typically consists of the ISO insert, a matching external holder or boring bar, a shim/clamp set and spare screws for quick replacement. These mechanical details ensure repeatable seating and concentricity, supporting stable cutting conditions and predictable tool life.

Efficiency and process reliability in steel turning

The GT9530 grade is optimised as a wear-resistant finishing to light universal option for steel, offering a balance between tool life and surface quality. With a single-sided chipbreaker, chip control can be matched to the workpiece, machining type and stability of the set-up. Choosing the correct chipbreaker and grade for the application reduces heat build-up and lowers the risk of built-up edge, which in turn keeps cycle times steady and the process more productive. This insert is particularly suited to operations where surface integrity and reduced downtime are priorities, delivering an economical solution for medium- to high-volume finishing tasks.

Practical recommendations for integration

When integrating this ISO-format insert into existing tooling, verify holder compatibility with the CCMT060208 form and check for the correct clamp and screw set to secure the insert reliably. For best results, programme modest feed rates for finishing passes to exploit the 0.8 mm nose radius and secure the part to minimise vibration. The coated cermet substrate performs best under stable cutting conditions; where stability cannot be guaranteed, consider grades optimized for tougher interrupted cuts. For specific application parameters and cutting data, Metav Werkzeuge can provide tailored guidance to optimise the insert for the intended operation.

For tailored recommendations or to source the CCMT060208 GT9530 insert from Tungaloy, contact Metav Werkzeuge for application advice and order support at info@metav-werkzeuge.com or by telephone on +49 2822 7131930.

Technical data

• Article number: 6998304
• SKU: 6998304-Tungaloy
• Manufacturer SKU: TUN6998304
• Manufacturer: Tungaloy

Key measurements

• ISO designation: 060208
• Size: 06
• Included angle: 80°
• Relief angle: 7°
• Nose radius: 0.8 mm
• Plate thickness: 2.38 mm

Special features

• Coating/grade: GT9530 (coated cermet)
• Shape: rhombic CCMT
• Hole: with hole — cylindrical hole + single-sided countersink (40°–60°)
• Chipbreaker: single-sided
• Material: cemented carbide
• Typical application: turning — finishing to light universal for steel

FAQ

What materials is this insert intended for?
The CCMT060208 GT9530 insert is intended primarily for machining steel; the GT9530 coated cermet grade is optimised for wear resistance and improved surface finish when used under stable conditions.

How is the insert mounted in a holder?
The insert is mounted in CCMT-compatible external holders or boring bars that match the ISO CCMT060208 geometry; correct seating relies on matching form, tolerance, clamp or screw method, and the 2.38 mm plate thickness.

Which chipbreaker should be selected for this grade?
Select a chipbreaker that corresponds to the workpiece, type of cut and set-up stability; the CCMT060208 is supplied with a single-sided chipbreaker and performs best with chip control tuned to finishing operations.

Can this insert be used for internal turning?
Yes — the ISO-format CCMT geometry and the 7° relief angle allow use in both external and internal turning holders that accept CCMT inserts.

What are the identifying codes to order this insert?
Order using the article number 6998304, SKU 6998304-Tungaloy, or the ISO designation CCMT060208 GT9530.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.