216mm Circular Saw Blade Z60 HLTCG Bore 30mm Cut Width 2.5mm, Multi-Material - Robert Bosch Power Tools GmbH

Take advantage of precise, multi-material cutting with a robust carbide-tipped design and a narrow 2.5 mm kerf for reduced material waste; order the blade through Metav Werkzeuge or contact our advisors for application guidance.

Circular Saw Blade AD 216 mm (60 Teeth, 30 mm Bore) — BOSCH

The Circular Saw Blade AD 216 mm (60 Teeth, 30 mm Bore) is a multi-material blade optimised for clean, fine cuts in aluminium, non-ferrous metals, plastics, epoxy resin and wood

• High-precision 60-tooth geometry for fine cuts
• Carbide-tipped (HM) for extended tool life
• 30 mm bore with 2.5 mm kerf for standard setups

Accurate crosscuts and smooth edges for finishing work

The 60-tooth design provides a high tooth count that delivers finer finish quality and reduced chipping, which is particularly beneficial when working with non-ferrous metals and delicate panels. The increased number of teeth reduces the material removed per tooth, so surfaces are left cleaner and post-processing effort is minimised. This geometry is recommended where edge quality and dimensional consistency are priorities, as the blade’s profile is engineered to produce even chip evacuation and controlled cutting forces.

Multi-material capability that simplifies tooling choices

Designed for multi-material applications, the blade removes the need for frequent tool changes when switching between aluminium, plastic, epoxy resin and various woods. The cutting geometry and carbide grade are balanced for versatility: a single tool that handles a range of substrates while preserving edge quality. For workshops aiming to streamline operations, this reduces tooling inventory and setup time, enabling more efficient job scheduling without compromising cut quality.

Carbide tipping (HM) for longevity and cost-efficiency

The HM (carbide-tipped) teeth are brazed to a precision steel body to deliver wear resistance and stability under continuous use. Carbide tips retain sharpness longer than conventional high-speed steel, so blade longevity is extended and replacement frequency reduced. This directly contributes to lower total cost of ownership in production environments where tool life and consistent performance are essential. Users should interpret HM as a standard industry indication of tungsten carbide reinforcement for cutting edges.

Compatibility considerations and safe operation

A 216 mm diameter and 30 mm bore match common circular saw arbors, while the 2.5 mm kerf balances cutting strength with minimal material waste. The narrower kerf reduces power draw and material loss during each cut, making it suitable for battery-powered or lower-power saws where efficiency matters. Correct mounting and secure clamping are required; the blade should be installed on compatible saws with the specified arbor diameter and run at speeds recommended by the machine manufacturer to ensure optimal performance and safety.

Practical benefits for the workshop workflow

By combining a fine-tooth pitch with a robust carbide edge and a moderate kerf width, the blade supports both precision finishing and extended production runs. Fewer tool changes and consistent cut results reduce cycle times and downstream labour for deburring or sanding. For trades and small-scale manufacturers seeking a reliable all-rounder, the blade presents a pragmatic compromise between specialised cutters and coarse general-purpose discs.

For Bosch quality and reliable multi-material performance, contact Metav Werkzeuge for tailored advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930

Technical Data

• Article number: 8000342263NW
• SKU: 8000342263NW
• Label: Kreissägeblatt AD 216mm Z.60 HLTCG Bohr.30mm Schnitt-B.2,5mm HM BOSCH
• Manufacturer: Robert Bosch Power Tools GmbH

Specifications

• Diameter: 216 mm
• Teeth: 60
• Bore: 30 mm
• Kerf / Cutting width: 2.5 mm

Features

• Carbide-tipped (HM) teeth
• Multi-material cutting: aluminium, non-ferrous metals, plastic, epoxy resin, wood
• Model code: HLTCG
• Intended use: precise crosscutting and finishing

FAQ

What materials can this blade cut effectively?
The blade is specified for multi-material use and performs well on aluminium, non-ferrous metals, plastics, epoxy resin and wood when run at appropriate speeds and feed rates.

Is the 30 mm bore compatible with standard saws?
Yes, the 30 mm bore matches many common arbor sizes; compatibility should be confirmed against the machine’s arbor specification prior to installation.

How does the 60-tooth layout affect finish and speed?
A 60-tooth configuration delivers a finer surface finish and reduced splintering, though it will generally cut more slowly than a coarse-tooth blade of the same diameter.

What does HM mean for this blade?
HM indicates carbide-tipped teeth (tungsten carbide) which provide greater wear resistance and longer service life compared with HSS alternatives.

Can this blade be used for production runs?
The carbide tipping and robust design make the blade suitable for extended use in production, provided cutting parameters and machine compatibility are observed.

Manufacturer/Responsible: Robert Bosch Power Tools GmbH, Max-Langen-Strasse 40-46, 70771 Leinfelden-Echterdingen