14-20mm Adapter For Drill Grinder VDG 13A Adjustable Angle Ø14-20, Collet Set ER32 - Vertex
€199.00
Product information "14-20mm Adapter For Drill Grinder VDG 13A Adjustable Angle Ø14-20, Collet Set ER32 - Vertex"
Take advantage of precise, repeatable point geometry and a comprehensive ER32 collet set to keep production running with fewer tool exchanges; the adaptor also broadens drilling options up to Ø20 mm for greater flexibility. Order the adaptor directly via Metav Werkzeuge or ask our consultants if needed.
Adaptor for Drill Sharpening / VDG-13A — ER32 collet set, adjustable 90°–140°
The Adaptor for Drill Sharpening / VDG-13A converts a VDG 13A grinder into a dedicated drill‑sharpening station, enabling accurate regrinds of HSS and SK drills for workshop and light industrial use
- ER32 collet set for Ø14–20 mm
- Adjustable angles for precise point geometry
- Compatible with VDG 13A drill grinder
- Includes collet chuck and ER32 key
Consistent point geometry for reliable drilling performance
The adaptor provides a controlled method to restore or modify drill point angles, delivering consistent, repeatable results that reduce scrap and rework. By using the supplied ER32 collet set (seven sizes covering Ø14–20 mm) the device secures the drill concentrically, which helps maintain symmetry during each regrind. This precision is particularly beneficial when refurbishing HSS and SK drills, as correct point geometry improves chip evacuation and reduces heat build-up, extending tool life and stabilising hole quality in serial operations.
Wide angle range and extended diameter capability for flexible applications
With two adjustable angle ranges—90°–140° for Ø14–18 mm and 118°–140° for Ø18–20 mm—the adaptor allows optimisation of the drill point for material and application, from fast‑cutting operations to deeper penetration tasks. The ability to tailor the point angle directly on the grinder simplifies setups and minimises downtime compared with sending tools out for regrinding. Compatible with the VDG 13A grinder, the attachment effectively extends grinding options up to Ø20 mm, enabling a broader range of internal workshop reconditioning without the need for additional machines.
Ready for workshop routines and straightforward handling
Delivered with a collet chuck, a set of seven ER32 collets and an ER32 key, the unit is designed for quick changeovers and robust clamping. The compact construction and 1 kg mass make it easy to fit and remove while preserving stability during grinding. For complex or unfamiliar applications, Metav Werkzeuge combines practical advice with a broad selection of accessories to optimise tool availability and reduce procurement effort, supporting efficient workflows across industry and craft settings.
Contact Metav Werkzeuge to confirm compatibility with existing VDG 13A grinders and to arrange supply of the adaptor and collet set
Technical data
- Article number: 8001-012 VERTEX
- Name: Adaptor for Drill Sharpening / VDG-13A
- Manufacturer: Vertex
Core specifications
- Compatible drill diameters: Ø14–20 mm
- Adjustable angle ranges: 90°–140° (Ø14–18 mm); 118°–140° (Ø18–20 mm)
- Weight: 1 kg
Special features
- Adapter for drill grinder VDG 13A
- Collet chuck with ER32 collet set (7 pcs Ø14–20 mm)
- ER32 key included
- Extends grinding options up to Ø20 mm
- Suitable for sharpening HSS and SK drills
FAQ
What drill sizes can the adaptor handle?
The adaptor supports drill diameters from Ø14–20 mm, using the supplied ER32 collet set to secure each tool for accurate regrinds.
Which grinders is the adaptor compatible with?
The accessory is designed for use with the VDG 13A drill grinder and adapts that machine for precise drill sharpening tasks.
Can the adaptor sharpen carbide drills?
The unit is specified for HSS and SK drills; carbide regrind requirements differ and should be checked against tool specifications before use.
What is included in the delivery?
Delivery comprises the adaptor, a collet chuck, a set of seven ER32 collets (Ø14–20 mm) and an ER32 key, as stated for SKU 8001-012 VERTEX.
How do the adjustable angles affect drilling?
Changing the point angle alters chip flow and penetration characteristics; the adaptor’s 90°–140° and 118°–140° ranges let users tailor geometry for material and cut conditions.
Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Zubehör
Take advantage of precise, workshop-ready reconditioning with a compact left-hand design and an integrated CBN grinding wheel that covers drills from Ø 2.1–13 mm; the machine combines repeatable geometry and robust motor performance to keep production flowing. Order directly via Metav Werkzeuge or request technical advice from the consultants at Metav for tailored application support. VDG-13L Left Hand Drill Grinder — Precision left-hand drill sharpener, Ø 2.1–13 mm (Vertex) The VDG-13L Left Hand Drill Grinder is a compact sharpening machine designed for reconditioning HSS and SK drills in toolrooms and industrial workshops, delivering adjustable point geometry and consistent edge quality for frequent use Left-hand grinder for Ø 2.1–13 mm drills Adjustable point angle 118°–135° 230 V, 200 W motor; 5,300 rpm Includes CBN wheel and collet set Accuracy and repeatability for everyday tool care The VDG-13L focuses on precision reconditioning by restoring drill tips to a defined geometry. With a diameter range of Ø 2.1–13 mm and an adjustable point angle from 118°–135°, the unit re-establishes cutting edges that meet process tolerances, reducing scrap and rework. The supplied set of collets and the collet holder ensure concentric clamping and uniform centring, which is essential when consistent runout and identical point form are required for series workflows. Robust drive and steady rotational speed for stable grinding Equipped with a 230 V / 200 W motor running at 5,300 rpm, the machine provides the steady rotational speed needed for repeatable sharpening cycles. The fixed speed and stable spindle behaviour support predictable material removal, which simplifies cycle planning in a busy workshop. The unit’s total mass of 9 kg gives bench-mount stability while remaining portable enough for relocation between workstations. Practical accessories that save setup time The grinder is shipped with an 11-piece collet set (Ø 3–Ø 13 mm), a collet holder, a CBN grinding wheel and the Allen key required to change the wheel. These accessories allow immediate operation for common drill sizes and fast changeover when different diameters are required. The CBN wheel gives a long service life and consistent abrasive performance, meaning fewer wheel changes and lower consumable-related downtime. Material compatibility and explained terminology The unit supports re-sharpening of HSS and SK drills. High-speed steel (HSS) is a widely used tool material that benefits from correct point profiles to preserve cutting performance; reconditioning restores the primary clearance and chisel edge geometry. The adjustable point angle lets technicians adapt tip geometry for different tasks, for example a standard 118° for general drilling or a larger angle up to 135° for harder or abrasive materials. Suited for workshops that value reliability and throughput The left-hand orientation and compact footprint make the device suitable for small toolrooms and maintenance shops needing reliable reconditioning without complex setup. The CE certification confirms compliance with relevant safety standards, offering reassurance about conformity and safe integration into workshop routines. Its combination of repeatable results and straightforward accessory set helps to lower total tool costs and maintain machining quality across shifts. Contact Metav Werkzeuge for application-specific advice on the Vertex VDG-13L and arrange a specification check to ensure the machine meets workshop requirements. Technical data Article number: VDG-13L Name: VDG-13L Left Hand Drill Grinder Manufacturer: Vertex CE certificate: Yes Core specifications Drill diameter range: Ø 2.1–Ø 13 mm Point angle: 118°–135° Speed: 5,300 rpm Motor: 230 V / 200 W / 50 Hz Weight: 9 kg Special features Sharpening: HSS and SK drills Accessories: 11 collets Ø 3–Ø 13 mm, collet holder, CBN grinding wheel, Allen key for wheel change Left-hand configuration Compact, bench-mount design FAQ Which drill diameters can be sharpened with this grinder? The VDG-13L supports re-sharpening from Ø 2.1 mm up to Ø 13 mm, covering common workshop drill sizes and enabling rapid changeover using the included collets. Can the machine handle carbide drills? The unit is specified for HSS and SK drills; carbide (solid carbide) reconditioning normally requires dedicated diamond-based equipment, so carbide sharpening is not recommended on this grinder. How is the point angle adjusted and why does it matter? The point angle is adjustable between 118° and 135° to match drilling tasks; a smaller angle offers faster penetration in soft materials while a larger angle improves edge life in harder or abrasive materials, thus influencing cutting behaviour and hole quality. What consumables are included and which will need replacing? Included accessories are an 11-piece collet set (Ø 3–Ø 13 mm), collet holder, CBN wheel and Allen key. The grinding wheel is a consumable expected to require replacement over extended use. Is the grinder suitable for mobile workshop use? At 9 kg the unit is relatively light and bench-mountable, allowing relocation when necessary; its compact design is intended for toolrooms and maintenance benches rather than heavy mobile use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan