ACGT060204R-M85 WXN15 Wendeplatten - Walter Tools

Take advantage of the combination of a sharp uncoated carbide grade (WXN15), a Parallelogram 85° geometry and the tailored M85 chipbreaker to achieve clean shearing and predictable chip control in non‑ferrous machining; order directly via Metav Werkzeuge or ask the consultants for specification support.

ACGT060204R-M85 WXN15 Milling indexable insert, Parallelogram 85° for non‑ferrous metals – Walter Tools

ACGT060204R-M85 WXN15 is a milling insert engineered for high‑quality cutting of non‑ferrous materials, offering a compact profile and a geometry optimised for stable, sharp‑edge performance.

• Parallelogram 85° geometry
• WXN15 uncoated carbide grade
• M85 chipbreaker for clean chips
• 0.4 mm corner radius for fine edges

Predictable edge life and consistent surface quality

The insert is based on the WXN15 grade, an uncoated carbide designed for sharp cutting in aluminium, copper and brass work. Its composition and geometry combine to reduce built‑up edge and minimise material adhesion, which directly improves component finish and reduces rework. For shops focusing on repeatable, high‑quality results, this insert provides consistent shearing and longer usable life on soft, adhesive materials compared with generic grades.

Geometry that optimises chip control and tool stability

The Parallelogram 85° form and the integrated M85 chipbreaker direct chips away from the cutting zone, reducing surface smearing and the risk of recutting. The moderate 7° relief angle helps maintain a cutting edge that resists burring while allowing smooth entry into thin walls or delicate contours. These design choices make the insert particularly suitable for interrupted cuts and high feed operations where stable chip evacuation and edge integrity matter.

Application range and practical handling in the workshop

Marked for the N‑group, the insert is intended for non‑ferrous metals such as aluminium alloys, copper and brass components. Its 0.4 mm corner radius balances edge strength with the ability to achieve fine contours and acceptable corner radii on finished parts. The insert’s size and thickness suit modular milling systems and standard cutter bodies; replacement is rapid and indexing is straightforward, supporting short changeover times and reliable cycle planning.

Productivity advantages and economical machining

Using a purpose‑designed grade and chipbreaker reduces manual finishing and scrap, increasing net output per tool life. The combination of a sharp, uncoated edge and controlled chip formation allows higher material removal rates in many aluminium applications, often translating into lower unit costs and improved throughput. When paired with appropriate feeds and speeds, the insert delivers stable production over multiple workpieces, supporting efficient process chains in small and medium series manufacturing.

Contact Metav Werkzeuge for a tailored recommendation on Walter Tools inserts to optimise cycle times and surface quality in non‑ferrous milling tasks

Technical data

• Article number: ACGT060204R-M85-WXN15-WALTER
• Designation: ACGT060204R-M85 WXN15
• Product type: Milling indexable insert
• Series: Walter N‑Sortensystem
• Grade: WXN15
• Manufacturer: Walter Tools

Facts

• Relief angle: 7°
• Corner radius: 0.4 mm
• Insert size: 06
• Thickness: 02
• Plate form: Parallelogram 85°
• Chipbreaker: M85
• Tolerance class: G

Special features

• Uncoated carbide grade (sharp cutting edge)
• Suitable for non‑ferrous metals (N)
• Parallelogram 85° geometry for stable cutting
• M85 chipbreaker for clean chip control
• Execution: T
• Walter N‑series

FAQ

Is this insert suitable for aluminium alloys? Yes. The ACGT060204R‑M85 WXN15 insert from Walter Tools is specified for non‑ferrous metals and performs well on aluminium alloys due to its sharp, uncoated carbide grade and M85 chipbreaker.

What advantage does the Parallelogram 85° form provide? The Parallelogram 85° geometry improves engagement angle and stability during milling; combined with the M85 chipbreaker it enhances chip flow and reduces surface smearing in soft metals.

Can the insert be used for interrupted cuts? Yes. The combination of the moderate relief angle and the robust edge geometry supports interrupted cutting conditions while maintaining edge life and component quality.

How fine a corner radius can be achieved with this insert? The insert has a 0.4 mm corner radius, which offers a compromise between edge strength and the ability to produce relatively fine internal radii on finished components.

Is the grade coated or uncoated, and what does that mean for machining? The WXN15 grade is uncoated carbide, which delivers a very sharp edge and reduced friction for adhesive materials; this is particularly beneficial when machining non‑ferrous metals where coatings can promote built‑up edge.

Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen

Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.