ADHT160616R-G88 WK10 Wendeplatten - Walter Tools

Take advantage of the combination of reliable cutting performance, a 15° clearance angle and a 1.6 mm corner radius for productive milling operations; order the ADHT160616R-G88 WK10 milling insert directly via Metav Werkzeuge or ask the consultants if needed.

ADHT160616R-G88 WK10 milling insert — 15° clearance, 1.6 mm corner radius — Walter Tools

The ADHT160616R-G88 WK10 is a parallelogram 85° milling insert designed for general face and shoulder milling where an uncoated carbide grade is required and consistent chip control is essential.

• 15° clearance angle for positive cutting
• 1.6 mm corner radius for robust edges
• Parallelogram 85° insert geometry
• Uncoated carbide grade WK10

Increased productivity through predictable chip control

The parallelogram geometry combined with the G88 chipbreaker enables controlled chip formation during interrupted and continuous cuts, which reduces recutting and improves process stability. This geometry, together with the 15° clearance angle, lowers cutting forces in many milling conditions and can translate into smoother feed rates and fewer tool changes. For production environments where cycle time and repeatability matter, the insert’s design supports a steady machining rhythm and clearer planning of tool life.

Material suitability and application guidance

The insert is supplied in the WK10 grade — an uncoated carbide option within Walter’s open series — and its material matrix should be consulted to determine optimal workpiece compatibility. The designation indicates an economical, general-purpose carbide; however, the specific workpiece materials and cutting parameters must be verified in the product matrix before use. When chosen appropriately, this grade can offer a balance between edge strength and cost-efficiency for a range of machining tasks.

Robust edge life thanks to geometry and radius

A 1.6 mm corner radius increases the strength of the cutting edge and reduces vulnerability to chipping under heavy loads or interrupted cuts. The insert’s parallelogram 85° form provides a stable seat and a positive cutting orientation that concentrates the cutting forces favourably for shoulder milling. In practice, a larger corner radius can permit higher feed per tooth while preserving surface quality, making the geometry suitable for both light finishing passes and more aggressive material removal where machine rigidity allows.

Practical benefits for workshop efficiency

Specified as ADHT160616R-G88 WK10, this insert is straightforward to integrate into existing toolholders that accept the parallelogram 85° form. The combination of a dedicated chipbreaker, defined clearance angle, and a reinforced corner reduces downtime from edge failure and streamlines tool management. By selecting the correct insert geometry and grade for the job and referring to the technical matrix for cutting data, shops can achieve better tool utilisation and predictable part quality without unnecessary over-specification.

For personalised application advice or to check immediate availability of genuine Walter Tools inserts, contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) for consultation and ordering.

Technical data

• Article number: ADHT160616R-G88-WK10-WALTER
• Designation: ADHT160616R-G88 WK10
• Product type: Milling insert
• Manufacturer: Walter Tools
• Series: Walter Schneidstoffsorte - Serie offen
• Grade: WK10
• Execution: T
• Tolerance class: H

Numbers / core technical data

• Clearance angle: 15°
• Corner radius: 1.6 mm
• Insert size: 16
• Thickness code: 06

Designs / special features

• Insert shape: Parallelogram 85°
• Chipbreaker: G88
• Material information: Katalogabhängig
• ISO designation: ADHT160616R-G88 WK10
• Notes: Sorteneinsatz / Werkstoffeignung prüfen anhand der Produktmatrix

FAQ

What materials is this insert suitable for?
The ADHT160616R-G88 WK10 is an uncoated carbide grade; suitability depends on the workpiece and cutting data — check the product matrix for specific material recommendations.

Is the 1.6 mm corner radius suitable for finishing?
A 1.6 mm corner radius provides robustness and can be used for light finishing where a slightly stronger edge is acceptable; for fine finish requirements, consider smaller radii supported in the same series.

Which chipbreaker does this insert use and why does it matter?
This insert features the G88 chipbreaker, designed to promote controlled chip formation and reduce recutting, which helps maintain process stability during both interrupted and continuous milling.

Can this insert be used for shoulder milling?
Yes, the parallelogram 85° form and positive clearance angle make the insert appropriate for shoulder milling applications when matched with suitable holders and cutting parameters.

What should be checked before selecting this insert for production?
Before selection, verify workpiece material compatibility and recommended cutting data in the WK10 product matrix and confirm holder compatibility for the parallelogram 85° form.

Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany

The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group and is a globally recognised manufacturer of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.