ADKT 150524 IC830 Indexable Insert - ISCAR

Take advantage of the combination of secure clamping, a defined 90° cutting geometry and compatibility with ADKT 1505 indexable inserts to maintain steady cycle times and predictable tool life; order the Corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T200TM — 90° tool head for ADKT 1505 indexable inserts (Teknik Makina) A Corner tool head T200TM engineered for turning and facing operations with ADKT 1505 indexable inserts, delivering repeatable 90° cutting performance in industrial production environments 90° cutting geometry for precise facing Compatible with ISCAR ADKT 1505 inserts 16 mm shank for secure clamping Four cutting edges for extended service life Accurate 90° geometry for repeatable faces and shoulders The T200TM is built around a 90° cutting geometry that simplifies setup for facing and shoulder operations. By using standard ADKT 1505 indexable inserts (compatible with ISCAR), the head provides a predictable cutting line and consistent surface finish. The combination of defined insert seating and the head’s rigid interface reduces vibration and improves dimensional repeatability, which translates into fewer reworks and steadier production throughput. Secure clamping and straightforward maintenance for reliable shifts Clamping integrity is central to performance: the head features a 16 mm shank that ensures stable seating in standard toolholders and a fixation system secured with an M4x10 Torx screw operated by a T15 key. This arrangement keeps the insert pocket firmly closed under load and facilitates fast index changes. Routine service is minimal — the Torx connection limits cam-out and wear, so maintenance intervals are extended without sacrificing operational safety. Compact design engineered for industrial use A compact footprint supports versatile machine integration: the head measures 40 mm diameter with a 45 mm overall length and weighs 0.27 kg, making it suitable where clearance and balance are critical. The small mass contributes to lower centrifugal forces at speed and helps preserve spindle bearings, while the robust construction and first-class metalworking in the component ensure long in-service life. The presence of four cutting edges on the selected inserts allows multiple indexes per insert, improving cost-efficiency per cutting edge. Practical application advice to speed setup and reduce downtime The indexable-head concept streamlines production: replace worn inserts quickly and restore cutting performance without reclamping the entire assembly. For facing, ensure the toolholder accepts the 16 mm shank and that the insert seat is clean before fitting a fresh ADKT 1505 insert. Correct torque on the M4x10 Torx screw and the use of the T15 key secure the insert and prevent micro-movement during heavy cuts. This pragmatic approach to handling reduces set-up time and keeps machines cutting rather than idling. Contact Metav Werkzeuge today for personalised application support on the Teknik Makina T200TM 90° corner tool head and secure delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T200TM Brand: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Shank diameter: 16 mm Overall length: 45 mm Diameter: 40 mm Weight: 0.27 kg Cutting angle: 90° Cutting edges: 4 Torx screw: M4x10 Torx key: T15 Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Application: Turning / facing with indexable inserts Design: 90° corner head Notes: First-class metalworking, long service life FAQ What inserts fit this turning head? The Corner tool head T200TM is designed for ADKT 1505 indexable inserts; it is compatible with inserts from ISCAR marked ADKT 1505. Is a special key required to change the insert? An M4x10 Torx screw secures the insert; a T15 Torx key is used to tighten and release it on the T200TM. Which toolholder accepts the head’s shank? The head has a 16 mm shank diameter and requires a toolholder that accepts a 16 mm shank for safe clamping and correct tool alignment. What benefits do four cutting edges provide? Using inserts with four usable edges increases effective cutting life per insert and reduces index-change frequency, improving uptime with the T200TM head. Is the head suitable for heavy-duty facing? The compact, rigid design and secure Torx clamping make the head appropriate for standard facing loads; ensure the machine and holder match the required cutting parameters. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of adaptability, toolholder stability and straightforward insert changes for consistent milling performance; order directly via Metav Werkzeuge or consult the team for application-specific advice. Shank milling cutter S319TM – 30 mm cutting diameter, for ADKT 1505 indexable inserts (Teknik Makina) A Shank milling cutter S319TM engineered as an indexable milling solution for face and peripheral operations with ADKT 1505 inserts, suited to workshop and industrial production settings 30 mm cutting diameter for versatile milling Compatible with ADKT 1505 indexable inserts 25 mm shank for secure toolholding M4x10 Torx screw with T15 key for fast changes Stable clamping and consistent chip control for high-precision runs The S319TM is configured around a 25 mm shank and a 30 mm cutting diameter, providing a balance between rigidity and accessibility. This shank diameter supports secure clamping in standard holders, which reduces runout and vibration during milling. The combination of a longer reach and a solid tool connection leads to improved surface finish and predictable tool life, especially when paired with ADKT 1505 indexable inserts from established suppliers such as ISCAR. The result is fewer process interruptions and a steady production rhythm. Designed for fast insert replacement and low downtime Insert changes are secured by an M4x10 Torx screw tightened with a T15 key, enabling quick, repeatable replacement without specialised tools. The tool’s three cutting edges layout allows for stable engagement and even load distribution across the insert seats, which supports efficient cutting and simplified maintenance cycles. Clear mechanical interfaces translate into shorter setup times and easier stock management of replacement inserts, enhancing overall operational efficiency. Reach and cutting length tailored for practical workshop tasks With a 200 mm overall length and a 50 mm cutting length, this cutter provides the reach necessary for stepped or deep-surface milling while keeping effective cutting engagement. The specified geometry supports both face and peripheral cutting strategies, allowing operators to select the most economical approach for a given component. The tool’s mass — approximately 0.783 kg — contributes to dampening minor vibrations, aiding dimensional stability on medium-duty milling centres. Integration into production and procurement workflows As a dedicated indexable milling solution, the cutter fits into existing tool sets that rely on ADKT 1505 inserts and Torx fastenings, simplifying procurement and spares handling. Compatibility with widely available insert grades allows adjustments for finish, speed or workpiece material without changing the tool shank. For purchasers and workshop planners the emphasis is on predictable performance, straightforward servicing and interoperability with common insert lines, offering measurable gains in uptime and cost-efficiency. Secure application advice and order handling through Metav Werkzeuge — contact the specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored tooling recommendations and availability Technical data Article number: S319TM Manufacturer: Teknik Makina Product name: Shank milling cutter for ADKT 1505 indexable inserts Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Core facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 0.783 kg Fastening screw: M4x10 Torx key size: T15 Special features Indexable insert design Rapid insert replacement with Torx screw Suited for face and peripheral milling Standardised interfaces for easy integration FAQ What insert type fits this cutter? The cutter accepts ADKT 1505 indexable inserts; compatible insert grades from manufacturers such as ISCAR can be used depending on the application. Which screw and key are required for insert clamping? Insert clamping is secured with an M4x10 Torx screw, tightened using a T15 key. What are the key dimensions for toolholder selection? Key dimensions are a 25 mm shank and 200 mm overall length, with a 30 mm cutting diameter for holder compatibility checks. How many cutting edges does the tool have? The tool is specified with three cutting edges, designed to balance chip evacuation and cutting stability. Is this cutter suitable for deep-reach milling? The 50 mm cutting length combined with a 200 mm overall length gives sufficient reach for many stepped and recessed milling tasks while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high-stability shank cutter offering a 25 mm diameter, 55 mm cutting length and compatibility with ADKT 1505 indexable inserts for reliable, repeatable milling operations; fast insert changes are enabled by an M4x10 Torx clamping screw. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. S318TM Shank Cutter by Teknik Makina — 25 mm diameter, for ADKT 1505 indexable inserts A S318TM shank cutter engineered for secure mounting of ADKT 1505 indexable inserts, designed to support industrial milling tasks where stability and straightforward insert replacement are essential. 25 mm diameter for stable cutting Compatible with ADKT 1505 inserts (ISCAR) M4x10 Torx clamping with T15 key 200 mm overall length, 55 mm cutting length Consistent cutting performance through robust geometry The cutter’s 25 mm diameter and two cutting edges provide a stable platform that reduces vibration and improves surface quality during interrupted and continuous milling. This geometry supports consistent chip formation and promotes predictable tool life, which is particularly valuable in production environments where repeatability is critical. The tool’s ADKT 1505 compatibility ensures access to a broad range of indexable insert grades, allowing process engineers to select the most appropriate grade for application optimisation. Fast, secure insert changes that save setup time Insert replacement is achieved with a single M4x10 Torx clamping screw using a T15 key, enabling secure tightening and quick service cycles. The simple clamping system reduces downtime during tool changes and minimises the risk of incorrect seating; this translates into higher machine utilisation and lower overall process cost. The 200 mm overall length combined with a 55 mm cutting length balances reach and rigidity for many standard milling set-ups. Designed for workshop efficiency and integration The cutter is compatible with insert geometries from manufacturers such as ISCAR, simplifying procurement and inventory management by allowing the use of widely available ADKT 1505 inserts. With a compact mass of 0.711 kg and moderate overall length, the shank cutter integrates easily into existing toolholders and collet systems. Specified dimensions and standard clamping hardware support straightforward documentation in tooling lists and facilitate rapid selection for CAM programming and fixture planning. Contact Metav Werkzeuge for technical clarification or to request detailed drawings and application guidance for the Teknik Cutting Tools S318TM shank cutter — our Emmerich team is available to advise on insert grades and mounting options. Technical data Article number: S318TM Manufacturer: Teknik Makina Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter (mm): 25 Cutting length (mm): 55 Overall length (mm): 200 Cutting edges: 2 Weight (kg): 0.711 Special features For ADKT 1505 indexable inserts Torx clamping for rapid insert change Suitable for standard industrial milling holders FAQ Which inserts fit this shank cutter? The S318TM shank cutter is designed for ADKT 1505 indexable inserts and is compatible with ISCAR ADKT 1505 geometry. What are the key dimensions of the cutter? Key dimensions: 25 mm diameter, 55 mm cutting length, 200 mm overall length; weight approximately 0.711 kg. How is the insert secured? Inserts are secured with an M4x10 Torx screw; a T15 key is required for tightening and removal. Can the cutter be used with different insert grades? Yes, the shank cutter accepts ADKT 1505 inserts in various grades; selecting the correct grade depends on the workpiece material and machining strategy. Is a specific toolholder required? The shank diameter and overall length make the cutter compatible with common milling holders; confirm holder clamping range during tool selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of proven rigidity and precise indexable-insert compatibility: the robust 32 mm shank and three cutting edges deliver stable cutting performance and consistent surface finish. Choose direct procurement through Metav Werkzeuge or consult the technical advisers for application support. S316TM Shank Cutter for ADKT 1505 Indexable Inserts — 35 mm cutting diameter, 32 mm shank The S316TM is a shank cutter engineered for industrial milling tasks with ADKT 1505 indexable inserts, offering a compact overall length for straightforward integration into production toolsets 35 mm cutting diameter 32 mm hardened shank for rigidity Compatible with ADKT 1505 inserts (ISCAR) Includes M4x10 Torx clamp screw, T15 key Greater stiffness for repeatable machining results With a 32 mm shank and a solid build weighing 0.92 kg, this cutter is designed to reduce chatter and improve stability in interrupted and continuous cuts. The presence of three cutting edges contributes to balanced cutting forces, which helps to achieve a more consistent surface finish and longer insert life. For operations where dimensional repeatability matters, the design reduces the need for rework and supports higher process reliability. Fast indexable-insert changes minimise downtime Compatibility with ADKT 1505 indexable inserts — including variants from ISCAR — allows quick tool servicing and straightforward spare-part management. The clamping system uses an M4x10 Torx screw and a T15 key for secure, repeatable fixation of the insert, enabling rapid changes without specialised fixtures. This combination lowers setup times and simplifies tool handling in busy workshop environments. Compact geometry for versatile milling tasks A 35 mm cutting diameter, 50 mm cutting length and a total length of 150 mm make this cutter suitable for both face and light peripheral milling in confined tool envelopes. The cutter’s proportions provide a compromise between reach and rigidity, making it appropriate for finishing and semi‑finishing operations where access and stability are both required. The specification supports a broad range of production tasks without overcomplicating tool inventory. Built for efficient workshop operation The tool’s straightforward specification supports efficient stockkeeping and predictable performance on the shop floor. As a tool designed for indexable inserts, it reduces consumable waste compared with solid tools and allows rapid recovery from wear by replacing only the inserts. Application advice and machining recommendations are available to assist selection and integration into existing toolholders and machine setups. Choose the Teknik Makina S316TM for stable, high‑precision milling with ADKT 1505 inserts — contact Metav Werkzeuge in Emmerich for tailored procurement and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S316TM Manufacturer: Teknik Makina Suitable for inserts: ADKT 1505 Compatible insert maker: ISCAR Torx screw: M4x10 Torx key: T15 Facts Shank diameter: 32 mm Cutting diameter: 35 mm Cutting length: 50 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.92 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts M4x10 Torx clamp screw included T15 Torx key included SKU: S316TM FAQ Which inserts are compatible with this cutter? The cutter is designed for ADKT 1505 indexable inserts; variants from ISCAR are compatible and commonly used with this tool. What are the main dimensions to check for machine integration? Key dimensions are a 35 mm cutting diameter, 50 mm cutting length, 32 mm shank diameter and a 150 mm overall length. Is the clamp screw supplied with the cutter? Yes, the cutter comes with an M4x10 Torx clamp screw and the matching T15 key for insert securement. What milling tasks suit this cutter best? The tool is suitable for face and light peripheral milling where a compact overall length and good stability are required. How much does the cutter weigh and why does that matter? The cutter weighs 0.92 kg; the mass contributes to cutting stability and helps to dampen vibration during operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine rigid Ø32 mm shank, 60 mm cutting length and compatibility with ADKT 1505 indexable inserts for reliable, high-productivity milling. Order the tool directly via Metav Werkzeuge or consult the team for application-specific advice. Shaft Cutter S315TM – Ø32 mm, 3 cutting edges, for ADKT 1505 (Teknik Makina) The Shaft Cutter S315TM is a shank-mounted milling tool designed for industrial CNC work, built to accept ADKT 1505 indexable inserts and deliver stable material removal in demanding production environments. Three cutting edges for stable material removal Ø32 mm shank diameter for rigid clamping 60 mm cutting length for deeper engagement Compatible with ADKT 1505 inserts (ISCAR) Precision and rigidity for predictable metal removal The tool is engineered to prioritise rigidity and repeatable performance: the Ø32 mm shank and balanced three‑edge geometry reduce vibration and improve surface finish under load. With a solid overall length and robust construction, the cutter keeps cutting forces low and tool deflection predictable, which supports consistent part tolerances and longer insert life. This rational design makes the cutter suitable for serial production where process stability is essential. Fast insert changes and secure clamping for less downtime Compatibility with ADKT 1505 indexable inserts and the use of a Torx clamping screw streamline maintenance routines. The included screw specification M4x10 and key T15 enable secure fastening and repeatable seat location, reducing the risk of misalignment during insert changes. This arrangement shortens non-productive time and supports a consistent chip evacuation pattern, contributing to efficient cycle times and dependable machining results. Compact handling, reliable performance and workshop integration With a 60 mm cutting length, 150 mm overall length and a weight of 0.887 kg, the cutter balances reach and rigidity for many standard milling tasks. The three cutting edges distribute cutting loads evenly, improving feed stability and enabling higher effective metal removal rates under the right conditions. Specified dimensions and a clear compatibility profile make stock management and toolholder selection straightforward for procurement and production planners. Contact Metav Werkzeuge for tailored application advice and supply from Emmerich — their specialists can confirm fitment and delivery for industrial workflows Technical data Article number: S315TM Manufacturer: Teknik Makina Shaft diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.887 kg Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 FAQ Which indexable inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; the tool is supplied for use with ADKT 1505 inserts from ISCAR. How is the insert secured and which tool is required? Inserts are clamped with a Torx screw specified as M4x10, tightened using a T15 Torx key for secure, repeatable fixation. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, which balance cutting forces to reduce vibration and improve surface finish during milling operations. What are the key dimensions relevant for toolholding and reach? Key dimensions: Ø32 mm shank diameter, 60 mm cutting length and 150 mm overall length, which guide holder selection and reach planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, simple insert change-out and precise geometry to maintain steady milling productivity; order the tool via Metav Werkzeuge or consult our specialists for application advice. S314TM shaft cutter by Teknik Makina – 30 mm diameter, for ADKT 1505 indexable inserts The S314TM shaft cutter is a purpose-built indexable-insert milling tool for productive CNC machining, designed to accept ADKT 1505 inserts and to deliver stable cutting performance in repeated operations 30 mm cutting diameter for stable milling Compatible with ADKT 1505 indexable inserts 25 mm shank diameter for secure clamping Three cutting edges for efficient material removal Predictable metal removal with compact, rigid design The S314TM is engineered to provide consistent cutting through a combination of a 30 mm nominal diameter and a 25 mm shank, yielding higher stiffness at the toolholder interface and reduced vibration during engagement. With a 50 mm cutting length and a 150 mm overall length, the cutter offers a balance between reach and rigidity that suits both short-stepped finishing and deeper shoulder milling operations. The three-flute layout improves radial balance and ensures steady chip load per tooth, which in turn supports stable cycle times and repeatable component quality across production batches. Fast indexable-insert handling for minimal downtime Tool change and maintenance have been simplified by the standardised clamping design: the indexable inserts are secured with an M4x10 Torx screw and adjusted using a T15 key, enabling quick insert replacement and reliable seat contact every time. Compatibility with ADKT 1505 grade plates—commonly supplied by manufacturers such as ISCAR—means spare parts are widely available and changeovers are straightforward. This reduces unproductive machine idle time, allowing production planners to maintain throughput without complex tool regrinds or reconditioning. Suited to productive CNC milling operations The cutter’s geometry, incorporating three cutting edges, supports efficient chip evacuation and balanced cutting forces, which contributes to a predictable surface finish and longer insert life when parameters are set correctly. The bodied construction and measured mass (approx. 0.596 kg) give a favourable dynamic response in typical milling spindles, while the indexable-insert system keeps per-edge costs low and consistent. For job shops and in-house production lines seeking to streamline tooling logistics, this design offers a pragmatic blend of performance, serviceability and inventory friendliness. Contact Metav Werkzeuge for availability of the Teknik Makina S314TM shaft cutter and tailored procurement advice from our Emmerich team Technical data Article number: S314TM Manufacturer: Teknik Makina Product type: Shaft cutter for indexable inserts Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter: 30 mm Cutting edges: 3 Shank diameter: 25 mm Cutting length: 50 mm Overall length: 150 mm Weight: 0.596 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts M4x10 Torx clamping screw T15 Torx key interface SKU S314TM Brand: Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; compatible grades from established suppliers such as ISCAR are commonly used with the S314TM. How are the inserts secured and serviced? Inserts are clamped with an M4x10 Torx screw and can be tightened or released with a T15 key for rapid change-out and straightforward maintenance of the S314TM shaft cutter. What cutting profile and edge count does the tool offer? The tool is supplied with a 30 mm diameter and three cutting edges, optimised for balanced cutting forces and effective chip removal in indexable-insert milling. Is the cutter suitable for CNC production runs? Yes, the combination of a stiff 25 mm shank, standardised inserts and simple clamping makes the cutter well suited to repetitive CNC milling operations where quick insert changes and predictable performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a rigid 25 mm shank and compatibility with ADKT 1505 indexable inserts, this milling tool delivers stable cutting and quick insert changes for continuous production. Benefit from precise tool clamping, straightforward maintenance and expert advice — order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft-mounted milling cutter S312TM — 25 mm shank, for ADKT 1505 indexable inserts (Teknik Makina) The Shaft-mounted milling cutter S312TM is designed for shank-mounted milling operations using ADKT 1505 indexable inserts, offering a compact 150 mm overall length for versatile workshop use. 25 mm shank diameter for stable clamping Compatible with ADKT 1505 indexable inserts Two cutting edges for efficient material removal Supplied with M4x10 Torx screw and T15 key Stable shank design for precise machining The solid 25 mm shank and compact 150 mm overall length combine to reduce run-out and vibration during milling, which directly improves surface finish and dimensional consistency. A balanced configuration with two cutting edges ensures symmetric cutting forces, reducing chatter on standard toolholders and supporting consistent cycle times. The modest mass of 0.55 kg contributes to easier handling and rapid tool changes without compromising rigidity. Machine shops seeking repeatable results will value the combination of stable clamping and a short overhang for close-tolerance milling. Reliable insert system reduces downtime Designed for ADKT 1505 indexable inserts, the tool accepts widely available carbide inserts for fast replacement and predictable cutting performance. The insert pocket and secure fastening with the supplied M4x10 Torx screw (Torx key T15) make replacement straightforward and minimise downtime. Using established insert geometries means stocks of cutting grades from preferred manufacturers such as ISCAR can be used, so tooling inventory is easier to manage. The result is a pragmatic solution that supports steady production and simpler maintenance cycles. Easy maintenance and seamless workshop integration The straightforward construction and standard fastening hardware allow quick on-bench service and reduce the need for specialised tooling. Compatibility with common indexable inserts and a standard shank format simplifies integration into existing tool sets and reduces the number of adapters required. Focusing on functional reliability rather than cosmetic extras, this cutter is a practical component for mixed-production environments where changeover speed and predictable performance matter most. For dependable milling performance with a 25 mm shank, contact Metav Werkzeuge for personalised technical advice on the S312TM cutter from Teknik Makina — call +49 2822 7131930 or email info@metav-werkzeuge.com for further information and procurement support. Technical data SKU: S312TM Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Weight: 0.55 kg Diameter: 25 mm Cutting edges: 2 Special features Compatible with ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 included Torx key T15 included FAQ Which insert type is required for this cutter? The S312TM shaft-mounted milling cutter uses ADKT 1505 indexable inserts; compatible grades from ISCAR or other suppliers can be fitted. How is the insert secured to the cutter? Inserts for the S312TM are clamped with the supplied M4x10 Torx screw, tightened using the T15 key for secure seating. What are the shank and overall dimensions? This cutter features a 25 mm shank, a cutting length of 60 mm and an overall length of 150 mm. How many cutting edges does the tool have? The S312TM is supplied with two cutting edges, offering balanced cutting forces and efficient material removal. Is the tool compatible with inserts from major manufacturers? Yes, the cutter accepts ADKT 1505 inserts and is compatible with widely used insert suppliers such as ISCAR, facilitating stock commonality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines reliable indexable-insert compatibility, a stable shank design and straightforward maintenance for continuous milling performance; order via Metav Werkzeuge or consult our specialists for application advice. S310TM Shank milling cutter — for ADKT 1505 indexable inserts, Ø 40 mm, 4‑cut (Teknik Makina) The S310TM shank milling cutter is a robust insert-milling solution designed for machines that accept ADKT 1505 indexable inserts and require a compact, high-stability tool for repeatable machining tasks. Compatible with ADKT 1505 indexable inserts Ø 40 mm cutting diameter, 4 cutting edges Shank Ø 32 mm with 45 mm cutting length Secured with M4x10 Torx screw (T15 required) Reliable indexable-insert milling for repeatable throughput The use of ADKT 1505 indexable inserts brings the economic advantage of replaceable cutting edges without changing the whole tool body. By combining a four‑cut configuration with a 40 mm nominal diameter, this shank cutter reduces cycle time through stable chip formation and a balanced cut pattern. For production environments that prioritise predictable tool life and fast insert changes, the result is lower tooling cost per component and less unplanned downtime. The modular insert system also simplifies spare-part logistics when multiple cutters share the same insert family. Mechanical stability that supports precise machining The tool’s Shank Ø 32 mm and a total length of 120 mm provide a stiff connection to the spindle, improving concentricity and reducing vibration during heavy engagement. A 45 mm cutting length allows adequate axial engagement for many slotting and peripheral milling operations while keeping the cantilever short enough to preserve accuracy. The combination of these dimensions supports consistent surface finish and dimensional repeatability, which is essential for workshop and light-production applications where reproducible results are required shift after shift. Fast, secure clamping to keep maintenance time low Insert retention is achieved with a M4x10 Torx screw, tightened with a T15 key, enabling quick and secure insert changes with standard tooling. This straightforward fastening method minimises handling time and reduces the risk of incorrect seating, which helps maintain cutting geometry and overall process stability. Clear screw specification also facilitates maintenance planning and spare-part provisioning for maintenance teams and toolroom staff. Suitable for workshop and production toolrooms Built as a standardised shank milling cutter for indexable inserts, the tool suits workshops and production lines that prefer modular tooling concepts and easy inventory management. Compatibility with ISCAR-manufactured inserts broadens sourcing options and ensures access to a wide range of grades and geometries for future process optimisation. The design is aimed at users who require a pragmatic balance between mechanical rigidity and economical regrindable insert solutions. For a recommended fit in production or toolroom setups, rely on Teknik Makina’s S310TM shank milling cutter and contact Metav Werkzeuge for specification guidance and supply from their Emmerich facility. Technical data Article number: S310TM Brand: Teknik Makina Designation: Shank milling cutter for ADKT 1505 indexable inserts Alternate designation: for ADKT 1505 Indexable Inserts eClass: 21180806 ETIM: EC011860 Facts Cutting diameter: 40 mm Number of cutting edges: 4 Shank diameter: 32 mm Cutting length: 45 mm Overall length: 120 mm Weight: 0.759 kg Special features Compatible inserts: ADKT 1505 Insert manufacturer compatibility: ISCAR Fastening screw specification: M4x10 Torx Required Torx key: T15 FAQ What insert type does this cutter use? The cutter accepts ADKT 1505 indexable inserts; this insert family is used with the S310TM shank milling cutter. Is the tool compatible with ISCAR inserts? Yes, the S310TM is specified as compatible with ISCAR-manufactured ADKT 1505 indexable inserts. Which torque key is required for insert changes? Insert retention uses an M4x10 Torx screw; a T15 key is required to secure or remove the inserts on the S310TM. What are the main dimensions to check for machine compatibility? Key dimensions are a 40 mm cutting diameter, Shank Ø 32 mm, 45 mm cutting length and 120 mm overall length, which determine fit in the spindle and allowable overhang. Can this cutter be used across different production machines? The S310TM is a standard shank milling cutter designed for machines accepting the stated shank diameter and insert type; verify spindle and holder compatibility prior to use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com