ADKT 1505R8 Indexable Insert for Stainless Steel - MetavCUT

Benefit from the combination of ADKT 1505 insert compatibility, a compact Ø32 mm cutting diameter and a secure Ø25 mm shank for fast setup and consistent results; order via Metav Werkzeuge or consult the team for application advice. Shank milling cutter S307TM – indexable-insert milling cutter, Ø32 mm, 3 flutes (Teknik Makina) The Shank milling cutter S307TM is designed for medium-duty milling using ADKT 1505 indexable inserts and is ideal for production runs where quick insert changes and dependable clamping are essential Ø 32 mm cutting diameter Three cutting edges for efficient chip removal Compatible with ADKT 1505 indexable inserts Shank Ø 25 mm for secure clamping Consistent cutting performance for repetitive production The S307TM delivers reliable chip formation through its three-flute geometry, which balances cutting force and evacuation to maintain process stability. Thanks to the Ø32 mm diameter and a cutting length of 45 mm, the design supports steady material removal rates while keeping vibrations low. For production environments this means fewer interruptions and a predictable surface finish, helping to maintain cycle times and reduce scrap. Quick insert changes and robust clamping reduce downtime A practical benefit of the indexable-insert concept is the speed of service: inserts can be replaced without removing the cutting head from the machine. The cutter uses a M4x10 Torx screw secured with a T15 key, enabling fast, repeatable insert changes and secure retention. The shank Ø25 mm provides positive clamping in common toolholders, lowering the risk of tool movement and minimising rework caused by poor seating. Compatibility with established insert systems for process flexibility Engineered for use with ADKT 1505 inserts and compatible with ISCAR insert standards, this cutter allows integration into existing tooling inventories and simplifies spare-part management. Selecting a cutter that matches common inserts reduces procurement complexity and supports quicker set‑ups across multiple machines. The combination of indexable inserts and a standardised shank supports cost-effective machining by separating cutting edges from the tool body. Practical workshop advantages and handling information With an overall length of 120 mm and a mass of 0.477 kg, the tool is compact to handle and straightforward to store. The shank construction and balanced flute count help to reduce operator fatigue during tool changes and inspection. Where surface quality and throughput matter, choosing an indexable milling cutter like this one helps shops achieve repeatable results while keeping maintenance tasks simple and economical. Contact Metav Werkzeuge today for tailored recommendations on Teknik Cutting Tools' S307TM shank milling cutter and to discuss suitable insert grades and clamping solutions from our Emmerich team Technical data Article number: S307TM Manufacturer: Teknik Makina Eclass: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Number of flutes: 3 Cutting length: 45 mm Overall length: 120 mm Shank diameter: 25 mm Weight: 0.477 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key size T15 Indexable-insert milling cutter design FAQ Which inserts fit this cutter? The S307TM is designed for ADKT 1505 indexable inserts and is compatible with inserts from ISCAR, allowing use of established grades and geometries. What toolholder size is recommended for safe clamping? A toolholder that accepts a Ø25 mm shank provides secure clamping and stable machining when using this indexable-insert cutter. How many flutes does the cutter have and what is the benefit? The cutter has three flutes, which balance cutting stability and chip evacuation for consistent surface finish during medium-duty milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping, indexable-insert compatibility and a compact overall length for efficient milling cycles; the combination of a 25 mm shank and a 30 mm cutting diameter supports consistent surface quality and reduced vibration — Order the S306TM shank cutter directly via Metav Werkzeuge or ask our consultants if needed. S306TM shank cutter by Teknik Makina — 30 mm diameter, 3 cutting edges The S306TM is an indexable-insert shank cutter designed for machining with ADKT 1505 inserts, suited to general metalworking milling tasks where quick insert changes and stable performance are required Compatible with ADKT 1505 indexable inserts 30 mm cutting diameter for medium cuts 25 mm shank for stable clamping Three cutting edges for efficient metal removal Supplied with M4x10 Torx clamping screw T15 Stable clamping for consistent surface finish and tool life With a 25 mm shank and a compact 120 mm overall length, this cutter delivers reliable concentricity under typical milling conditions. The substantial shank diameter reduces deflection and vibration, which in turn helps to maintain a consistent surface finish and extends insert life. For production environments and busy workshops alike, the resulting decrease in scrap and rework represents a measurable operational advantage and supports shorter cycle times. Fast insert changes and secure clamping for minimal downtime The design accepts ADKT 1505 indexable inserts, enabling rapid reconditioning of the cutting edge without the need to replace the whole tool. Compatibility with ISCAR-type inserts broadens sourcing options. A M4x10 Torx clamping screw paired with a T15 driver ensures a secure, repeatable seat for each insert, simplifying changeovers and reducing the risk of incorrect installation. This arrangement translates into shorter maintenance intervals and predictable machine availability. Efficient material removal with balanced geometry The tool’s 30 mm diameter combined with three cutting edges is tuned for steady metal removal at sensible feed rates. A cutting length of 45 mm affords good engagement for through and face-milling tasks while preserving rigidity. The assembly’s modest mass of 0.466 kg contributes to rotational balance, supporting smoother operation at higher spindle speeds and improving chip evacuation during continuous milling. Practical fit for workshops and production lines Designed to be a pragmatic addition to a tooling set, the cutter supports common milling cycles and reduces the number of full-tool replacements by using indexable inserts. The combination of indexable-insert technology and a stable shank reduces both tooling costs and inventory complexity. For maintenance teams and production planners, this means fewer disruptions and a clearer cost-per-cut calculation, making the cutter a sound choice where uptime and predictable performance matter. For availability, insert compatibility advice or to discuss batch supply options, contact Metav Werkzeuge — Metav Werkzeuge is ready to advise by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S306TM Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Diameter: 30 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Weight: 0.466 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx clamping screw M4x10 Torx key size T15 Designed for indexable-insert milling FAQ What insert type does the cutter use? The cutter accepts ADKT 1505 indexable inserts; this format enables quick insert replacement and cost-effective edge refresh. Is the tool compatible with ISCAR inserts? Yes, the shank cutter is compatible with inserts from ISCAR, offering broader sourcing and reduced supply risk. What are the key dimensions to check for toolholder compatibility? Important dimensions are the 25 mm shank diameter, 30 mm cutting diameter and 120 mm overall length to ensure correct clamping and clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 25 mm shank, 45 mm cutting length and ADKT 1505 insert compatibility for consistent, low‑vibration milling; order via Metav Werkzeuge or consult their specialists for application guidance. Shank milling cutter S304TM — for ADKT 1505 indexable inserts, 25 mm shank (Teknik Cutting Tools) A versatile shank milling cutter S304TM intended for indexable‑insert face and slot milling where quick insert changes and secure clamping are required. Compatible with ADKT 1505 indexable inserts 25 mm shank diameter for stable clamping Two cutting edges for balanced milling Supplied with M4x10 Torx clamping screw Maximum flexibility through proven insert compatibility The S304TM is built around the widely used ADKT 1505 insert format, which allows shops to adopt a familiar insert geometry and maintain stock efficiency. With the indexable inserts interface, the tool facilitates rapid replacement of cutting edges without the need to regrind tools, reducing downtime and supporting predictable process planning. The association with established insert types also simplifies procurement and keeps tooling costs manageable over many production cycles. Dimensional stability that reduces vibration and runout Engineered with a 25 mm shank and an overall length of 120 mm, the tool provides a stable connection to standard toolholders while maintaining accessibility for deeper machining tasks. The 45 mm cutting length and two cutting edges combine to deliver a compact cutting zone and a symmetric cutting load, which helps to reduce vibration during interrupted cuts. These dimensional choices favour consistent surface finish and longer insert life when used within recommended speeds and feeds. Fast changes and secure clamping to keep production moving Clamping is executed with a M4x10 Torx screw and requires a T15 key, ensuring repeatable and secure insert retention for each replacement. The device’s modest mass (0.434 kg) minimises additional spindle inertia while preserving rigidity, which is beneficial in high‑repetition milling tasks. For commissioning or process integration, technical advice is available from Metav Werkzeuge to confirm holder compatibility and to recommend suitable cutting parameters for the specific ADKT 1505 grade in use. For tailored technical advice or immediate availability of the Teknik Cutting Tools S304TM, contact Metav Werkzeuge by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to ensure the tool meets production requirements Technical data Article number: S304TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Facts Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Diameter: 25 mm Cutting edges: 2 Weight: 0.434 kg Special features Compatible with ADKT 1505 inserts Fits ISCAR insert geometry Torx clamping screw M4x10 Torx key size T15 Brand: Teknik Cutting Tools FAQ Which insert type does this cutter accept? The cutter accepts ADKT 1505 indexable inserts; the geometry is compatible with the ADKT 1505 insert format used by ISCAR. What are the key dimensions to check for holder compatibility? Check the 25 mm shank diameter and 120 mm overall length against the toolholder; the cutting area extends 45 mm from the shoulder. How many cutting edges does the tool have and what is the benefit? The tool has two cutting edges, which provide a balanced cutting action for stable milling and consistent surface finish. Which clamping components are required for insert fixation? Insert fixation uses an M4x10 Torx screw tightened with a T15 key for repeatable, secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust Ø40 mm cutting diameter, 32 mm shank and 60 mm cutting length for steady material removal and high process reliability; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. Shank milling cutter S322TM – indexable-insert cutter with Ø40 mm and 4 flutes Shank milling cutter S322TM designed for slotting and peripheral milling with ADKT 1505 indexable inserts, offering stable clamping and fast insert changes for industrial machining Ø40 mm cutting diameter for versatile milling 32 mm shank for secure toolholding Four-flute geometry for improved chip control Compatible with ADKT 1505 indexable inserts Higher throughput through proven geometry and sturdy shank The combination of a 32 mm shank and a Ø40 mm cutting diameter provides a stable connection to the spindle, reducing vibration and supporting consistent cutting forces. With a four-flute layout, the cutter balances material removal rate and surface quality; this geometry enables efficient chip evacuation while maintaining feed rates appropriate for indexable-insert milling. The measured overall length of 200 mm gives sufficient reach for many set-ups without compromising rigidity. These attributes translate into predictable cycle times and lower scrap rates in production environments. Fast insert handling that keeps machines running Designed for ADKT 1505 indexable inserts, the tool uses a proven clamp and fastening solution to ensure repeatable positioning. The supplied fastening elements—M4x10 Torx screw and T15 key—allow secure and rapid insert replacement, reducing tool-change downtime and simplifying workshop logistics. Compatibility with ISCAR insert types expands sourcing options and helps to lower tooling inventory costs. For operations that schedule frequent insert changes, this cutter’s design supports quick interventions and faster returns to full productivity. Robust build for repeatable precision and chip management A cutting length of 60 mm gives an effective engagement zone for deeper cuts or stepped operations, while the four cutting edges deliver regular engagement and even wear distribution. The cutter’s weight of 1.272 kg reflects its solid construction, contributing to axial stability during heavy passes. By combining these mechanical characteristics, the tool offers predictable tool life and consistent surface finish, which is particularly beneficial for batch production and series manufacturing where process stability is paramount. Practical fitment and workshop advantages The tool is supplied for industrial use and mates with common toolholders thanks to its standard 32 mm shank. Being compatible with ADKT 1505 indexable inserts and widely used ISCAR formats reduces the need for specialised spare parts. This standardisation keeps the procurement process straightforward and aligns with lean tooling strategies. In addition, the clear mechanical interface and standard Torx fastening mean training requirements for operators are minimal, easing integration into existing production lines. For tailored tooling advice and reliable supply from Metav Werkzeuge—based in Emmerich and serving European industry—get in touch with the Metav team for recommendations on holder selection and optimal cutting parameters Technical data Article number: S322TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Diameter: 40 mm Shank diameter: 32 mm Cutting length: 60 mm Overall length: 200 mm Number of flutes: 4 Weight: 1.272 kg Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 SKU: S322TM FAQ What types of operations is this cutter suitable for? The S322TM shank milling cutter is intended for peripheral and slot milling operations using ADKT 1505 indexable inserts, providing stable removal rates for general machining tasks. Which insert format does the tool accept and is it widely available? This tool accepts ADKT 1505 indexable inserts; these inserts are common in industry and compatible sets are available from ISCAR and other suppliers suited to varied materials. How is the insert secured and which tool is required for changes? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is used for insertion and removal, enabling quick and repeatable insert changes. Is the shank size suitable for standard holders? Yes, the 32 mm shank is compatible with standard toolholders designed for that shank diameter, ensuring rigid clamping and straightforward integration into existing tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a Ø35 mm cutting diameter, a secure Ø32 mm shank and compatibility with ADKT 1505 indexable inserts delivers efficient, repeatable milling performance for general workshop and production tasks. Order the shank milling cutter directly via Metav Werkzeuge or contact the consultants for application advice. Shank milling cutter S321TM — for ADKT 1505 indexable inserts, Ø35 mm (Teknik Makina) The Shank milling cutter S321TM is a durable milling body designed to accept ADKT 1505 indexable inserts for versatile face and shoulder milling in production and toolroom environments 35 mm cutting diameter for medium-depth milling Three-indexable cutting edges for stable cuts Ø32 mm shank ensures secure clamping Compatible with ISCAR ADKT 1505 inserts Faster cycle times through stable, multi-edge cutting The tool is engineered for reliable material removal: a three-edge indexable design maintains cutting balance and reduces vibration, which shortens cycle times and improves tool life. The Ø35 mm cutting diameter provides a practical balance between cut width and rigidity, enabling consistent removal rates in batch production. For operations migrating from solid cutters, the indexable system reduces downtime associated with regrinds while keeping tooling costs manageable. Secure clamping and simple insert changes for uptime A robust Ø32 mm shank ensures firm clamping in common toolholders, delivering axial and radial stability during interrupted cuts. Insert retention is achieved with an M4x10 Torx screw (Torx key T15), allowing quick, repeatable replacement of ADKT 1505 inserts supplied by ISCAR. The straightforward fastening method minimises setup time and supports predictable torque application, which contributes to consistent seating and repeat accuracy across tool changes. Clear compatibility and application range Designed for use with ADKT 1505 indexable inserts, the cutter body accepts industry-standard insert geometry, facilitating access to a wide range of grades and edge preparations. Compatibility with ISCAR-branded inserts supports high-performance grades for finishing and roughing alike. The tool’s overall length of 200 mm and 50 mm effective cutting length make it suitable for shoulder milling and shallow slotting where accessibility and rigidity are required. Built for workshop reliability and measurable handling At a weight of 1.252 kg, the shank milling cutter offers a stable feel during mounting and handling while remaining manageable for routine tool changes. The tool’s configuration favours repeatability: the indexable system and standard screw interface promote consistent seating, while the compact geometry aids in reducing overhang in the holder. These properties contribute to predictable tool behaviour that benefits process planning and quality control. For ordering, application planning or to request machining recommendations for ADKT 1505 inserts contact Metav Werkzeuge — Metav’s advisors can assist by phone on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: S321TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Torx screw: M4x10 Torx key size: T15 Facts Cutting diameter: 35 mm Shank diameter: 32 mm Cutting length (shaft): 50 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 1.252 kg Special features Indexable insert system: ADKT 1505 Insert compatibility: ISCAR Securing screw: M4x10 (Torx T15) Designed for face and shoulder milling FAQ What insert type does this cutter accept? The cutter accepts ADKT 1505 indexable inserts; the design is intended for this insert family and provides secure retention via an M4x10 Torx screw. How many cutting edges are used and what is the benefit? The cutter uses three indexable cutting edges; this configuration improves balance, reduces vibration and extends insert life under moderate cutting conditions. Which insert manufacturers are compatible? The tool is compatible with ISCAR ADKT 1505 inserts and with other manufacturers offering the same ADKT 1505 geometry. What are the key dimensions for holder selection? Key dimensions include a Ø32 mm shank, Ø35 mm cutting diameter and 200 mm overall length, which should be matched to the machine’s toolholder and reach requirements. How is the insert secured and what tool is required? Inserts are secured with an M4x10 Torx screw; a T15 Torx key is required for tightening and loosening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, extended cutting length and indexable-insert flexibility to improve cycle stability and reduce downtime; order the tool directly via Metav Werkzeuge or consult the specialists for technical matching. Shank cutter S320TM — for ADKT 1505 indexable inserts, 32 mm shank (Teknik Makina) A robust Shank cutter S320TM designed for milling with ADKT 1505 indexable inserts, suited to medium and heavy-duty CNC milling where repeatable accuracy and fast insert changes are required Designed for ADKT 1505 indexable inserts 32 mm shank diameter for stable clamping 60 mm cutting length for deeper machining Compatible with ISCAR insert manufacturers High rigidity for consistent surface finish and tool life The combination of a 32 mm shank and a 200 mm overall length gives a stable connection between toolholder and spindle, minimising runout and vibration during interrupted cuts. Reduced chatter and improved stability translate directly into more consistent component geometries and extended insert life, making the tool suitable for batch production and demanding series work. The mass of 1.198 kg contributes to damping of cutting forces without compromising handling during tool change. Efficient material removal with indexable inserts Designed around the ADKT 1505 system, the cutter accepts standard indexable inserts that permit rapid replacement and consistent cutting geometry. The three‑edge configuration of 3 flutes ensures balanced cutting and reliable chip evacuation across a variety of materials, while the 60 mm cutting length enables deeper engagements where required. This design reduces machine idle time and supports a predictable cost-per-part calculation by separating the cutting edge from the carrier body. Practical fastening and service features for workshop use Retention is secured with an M4x10 Torx screw, driven by a T15 Torx key, enabling secure clamping of the insert seat and straightforward maintenance in the workshop environment. The standardised fastener type simplifies inventory and service operations, while the tool geometry permits straightforward insert indexing without complicated adjustments. Compatibility with major insert suppliers such as ISCAR helps to ensure availability of grades and geometries for specific materials. Suitable applications and operational benefits for production The tool is optimised for use in general CNC milling, toolroom jobs and industrial production where robustness and predictable behaviour are priorities. Typical applications include roughing and semi‑finishing in steels and general engineering alloys. The modular nature of the indexable system supports fast reconditioning of the cutting edge and keeps machine throughput high, which is especially valuable for subcontractors and in‑house production departments seeking stable, repeatable performance from a compact cutter by Teknik Makina Contact Metav Werkzeuge for procurement and technical advice on the Teknik Makina S320TM shank cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable insert grades and holder integration Technical data Article number: S320TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length: 60 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 1.198 kg Special features Compatible with ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key size T15 ECLASS: 21180806 ETIM: EC011860 FAQ What insert type does the tool accept? The cutter is designed for ADKT 1505 indexable inserts and is compatible with insert grades from ISCAR and other suppliers that match the ADKT 1505 specification. How many flutes does the cutter have and what is the benefit? The tool features 3 flutes, which provide balanced cutting forces and effective chip evacuation for improved surface finish and steadier machining. What are the critical dimensions to consider for holder selection? Key dimensions are the 32 mm shank diameter, the 60 mm cutting length and the 200 mm overall length; these determine rigidity and installation reach in the machine spindle. Which fasteners are required for insert clamping? Insert retention is secured with an M4x10 Torx screw; a T15 Torx key is used for installation and removal. Is the S320TM suitable for deep cutting applications? With a 60 mm cutting length and a robust shank, the S320TM is suitable for deeper engagements within the limits of machine rigidity and recommended insert geometry Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of adaptability, toolholder stability and straightforward insert changes for consistent milling performance; order directly via Metav Werkzeuge or consult the team for application-specific advice. Shank milling cutter S319TM – 30 mm cutting diameter, for ADKT 1505 indexable inserts (Teknik Makina) A Shank milling cutter S319TM engineered as an indexable milling solution for face and peripheral operations with ADKT 1505 inserts, suited to workshop and industrial production settings 30 mm cutting diameter for versatile milling Compatible with ADKT 1505 indexable inserts 25 mm shank for secure toolholding M4x10 Torx screw with T15 key for fast changes Stable clamping and consistent chip control for high-precision runs The S319TM is configured around a 25 mm shank and a 30 mm cutting diameter, providing a balance between rigidity and accessibility. This shank diameter supports secure clamping in standard holders, which reduces runout and vibration during milling. The combination of a longer reach and a solid tool connection leads to improved surface finish and predictable tool life, especially when paired with ADKT 1505 indexable inserts from established suppliers such as ISCAR. The result is fewer process interruptions and a steady production rhythm. Designed for fast insert replacement and low downtime Insert changes are secured by an M4x10 Torx screw tightened with a T15 key, enabling quick, repeatable replacement without specialised tools. The tool’s three cutting edges layout allows for stable engagement and even load distribution across the insert seats, which supports efficient cutting and simplified maintenance cycles. Clear mechanical interfaces translate into shorter setup times and easier stock management of replacement inserts, enhancing overall operational efficiency. Reach and cutting length tailored for practical workshop tasks With a 200 mm overall length and a 50 mm cutting length, this cutter provides the reach necessary for stepped or deep-surface milling while keeping effective cutting engagement. The specified geometry supports both face and peripheral cutting strategies, allowing operators to select the most economical approach for a given component. The tool’s mass — approximately 0.783 kg — contributes to dampening minor vibrations, aiding dimensional stability on medium-duty milling centres. Integration into production and procurement workflows As a dedicated indexable milling solution, the cutter fits into existing tool sets that rely on ADKT 1505 inserts and Torx fastenings, simplifying procurement and spares handling. Compatibility with widely available insert grades allows adjustments for finish, speed or workpiece material without changing the tool shank. For purchasers and workshop planners the emphasis is on predictable performance, straightforward servicing and interoperability with common insert lines, offering measurable gains in uptime and cost-efficiency. Secure application advice and order handling through Metav Werkzeuge — contact the specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored tooling recommendations and availability Technical data Article number: S319TM Manufacturer: Teknik Makina Product name: Shank milling cutter for ADKT 1505 indexable inserts Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Core facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 0.783 kg Fastening screw: M4x10 Torx key size: T15 Special features Indexable insert design Rapid insert replacement with Torx screw Suited for face and peripheral milling Standardised interfaces for easy integration FAQ What insert type fits this cutter? The cutter accepts ADKT 1505 indexable inserts; compatible insert grades from manufacturers such as ISCAR can be used depending on the application. Which screw and key are required for insert clamping? Insert clamping is secured with an M4x10 Torx screw, tightened using a T15 key. What are the key dimensions for toolholder selection? Key dimensions are a 25 mm shank and 200 mm overall length, with a 30 mm cutting diameter for holder compatibility checks. How many cutting edges does the tool have? The tool is specified with three cutting edges, designed to balance chip evacuation and cutting stability. Is this cutter suitable for deep-reach milling? The 50 mm cutting length combined with a 200 mm overall length gives sufficient reach for many stepped and recessed milling tasks while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high-stability shank cutter offering a 25 mm diameter, 55 mm cutting length and compatibility with ADKT 1505 indexable inserts for reliable, repeatable milling operations; fast insert changes are enabled by an M4x10 Torx clamping screw. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. S318TM Shank Cutter by Teknik Makina — 25 mm diameter, for ADKT 1505 indexable inserts A S318TM shank cutter engineered for secure mounting of ADKT 1505 indexable inserts, designed to support industrial milling tasks where stability and straightforward insert replacement are essential. 25 mm diameter for stable cutting Compatible with ADKT 1505 inserts (ISCAR) M4x10 Torx clamping with T15 key 200 mm overall length, 55 mm cutting length Consistent cutting performance through robust geometry The cutter’s 25 mm diameter and two cutting edges provide a stable platform that reduces vibration and improves surface quality during interrupted and continuous milling. This geometry supports consistent chip formation and promotes predictable tool life, which is particularly valuable in production environments where repeatability is critical. The tool’s ADKT 1505 compatibility ensures access to a broad range of indexable insert grades, allowing process engineers to select the most appropriate grade for application optimisation. Fast, secure insert changes that save setup time Insert replacement is achieved with a single M4x10 Torx clamping screw using a T15 key, enabling secure tightening and quick service cycles. The simple clamping system reduces downtime during tool changes and minimises the risk of incorrect seating; this translates into higher machine utilisation and lower overall process cost. The 200 mm overall length combined with a 55 mm cutting length balances reach and rigidity for many standard milling set-ups. Designed for workshop efficiency and integration The cutter is compatible with insert geometries from manufacturers such as ISCAR, simplifying procurement and inventory management by allowing the use of widely available ADKT 1505 inserts. With a compact mass of 0.711 kg and moderate overall length, the shank cutter integrates easily into existing toolholders and collet systems. Specified dimensions and standard clamping hardware support straightforward documentation in tooling lists and facilitate rapid selection for CAM programming and fixture planning. Contact Metav Werkzeuge for technical clarification or to request detailed drawings and application guidance for the Teknik Cutting Tools S318TM shank cutter — our Emmerich team is available to advise on insert grades and mounting options. Technical data Article number: S318TM Manufacturer: Teknik Makina Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter (mm): 25 Cutting length (mm): 55 Overall length (mm): 200 Cutting edges: 2 Weight (kg): 0.711 Special features For ADKT 1505 indexable inserts Torx clamping for rapid insert change Suitable for standard industrial milling holders FAQ Which inserts fit this shank cutter? The S318TM shank cutter is designed for ADKT 1505 indexable inserts and is compatible with ISCAR ADKT 1505 geometry. What are the key dimensions of the cutter? Key dimensions: 25 mm diameter, 55 mm cutting length, 200 mm overall length; weight approximately 0.711 kg. How is the insert secured? Inserts are secured with an M4x10 Torx screw; a T15 key is required for tightening and removal. Can the cutter be used with different insert grades? Yes, the shank cutter accepts ADKT 1505 inserts in various grades; selecting the correct grade depends on the workpiece material and machining strategy. Is a specific toolholder required? The shank diameter and overall length make the cutter compatible with common milling holders; confirm holder clamping range during tool selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of proven rigidity and precise indexable-insert compatibility: the robust 32 mm shank and three cutting edges deliver stable cutting performance and consistent surface finish. Choose direct procurement through Metav Werkzeuge or consult the technical advisers for application support. S316TM Shank Cutter for ADKT 1505 Indexable Inserts — 35 mm cutting diameter, 32 mm shank The S316TM is a shank cutter engineered for industrial milling tasks with ADKT 1505 indexable inserts, offering a compact overall length for straightforward integration into production toolsets 35 mm cutting diameter 32 mm hardened shank for rigidity Compatible with ADKT 1505 inserts (ISCAR) Includes M4x10 Torx clamp screw, T15 key Greater stiffness for repeatable machining results With a 32 mm shank and a solid build weighing 0.92 kg, this cutter is designed to reduce chatter and improve stability in interrupted and continuous cuts. The presence of three cutting edges contributes to balanced cutting forces, which helps to achieve a more consistent surface finish and longer insert life. For operations where dimensional repeatability matters, the design reduces the need for rework and supports higher process reliability. Fast indexable-insert changes minimise downtime Compatibility with ADKT 1505 indexable inserts — including variants from ISCAR — allows quick tool servicing and straightforward spare-part management. The clamping system uses an M4x10 Torx screw and a T15 key for secure, repeatable fixation of the insert, enabling rapid changes without specialised fixtures. This combination lowers setup times and simplifies tool handling in busy workshop environments. Compact geometry for versatile milling tasks A 35 mm cutting diameter, 50 mm cutting length and a total length of 150 mm make this cutter suitable for both face and light peripheral milling in confined tool envelopes. The cutter’s proportions provide a compromise between reach and rigidity, making it appropriate for finishing and semi‑finishing operations where access and stability are both required. The specification supports a broad range of production tasks without overcomplicating tool inventory. Built for efficient workshop operation The tool’s straightforward specification supports efficient stockkeeping and predictable performance on the shop floor. As a tool designed for indexable inserts, it reduces consumable waste compared with solid tools and allows rapid recovery from wear by replacing only the inserts. Application advice and machining recommendations are available to assist selection and integration into existing toolholders and machine setups. Choose the Teknik Makina S316TM for stable, high‑precision milling with ADKT 1505 inserts — contact Metav Werkzeuge in Emmerich for tailored procurement and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S316TM Manufacturer: Teknik Makina Suitable for inserts: ADKT 1505 Compatible insert maker: ISCAR Torx screw: M4x10 Torx key: T15 Facts Shank diameter: 32 mm Cutting diameter: 35 mm Cutting length: 50 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.92 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts M4x10 Torx clamp screw included T15 Torx key included SKU: S316TM FAQ Which inserts are compatible with this cutter? The cutter is designed for ADKT 1505 indexable inserts; variants from ISCAR are compatible and commonly used with this tool. What are the main dimensions to check for machine integration? Key dimensions are a 35 mm cutting diameter, 50 mm cutting length, 32 mm shank diameter and a 150 mm overall length. Is the clamp screw supplied with the cutter? Yes, the cutter comes with an M4x10 Torx clamp screw and the matching T15 key for insert securement. What milling tasks suit this cutter best? The tool is suitable for face and light peripheral milling where a compact overall length and good stability are required. How much does the cutter weigh and why does that matter? The cutter weighs 0.92 kg; the mass contributes to cutting stability and helps to dampen vibration during operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine rigid Ø32 mm shank, 60 mm cutting length and compatibility with ADKT 1505 indexable inserts for reliable, high-productivity milling. Order the tool directly via Metav Werkzeuge or consult the team for application-specific advice. Shaft Cutter S315TM – Ø32 mm, 3 cutting edges, for ADKT 1505 (Teknik Makina) The Shaft Cutter S315TM is a shank-mounted milling tool designed for industrial CNC work, built to accept ADKT 1505 indexable inserts and deliver stable material removal in demanding production environments. Three cutting edges for stable material removal Ø32 mm shank diameter for rigid clamping 60 mm cutting length for deeper engagement Compatible with ADKT 1505 inserts (ISCAR) Precision and rigidity for predictable metal removal The tool is engineered to prioritise rigidity and repeatable performance: the Ø32 mm shank and balanced three‑edge geometry reduce vibration and improve surface finish under load. With a solid overall length and robust construction, the cutter keeps cutting forces low and tool deflection predictable, which supports consistent part tolerances and longer insert life. This rational design makes the cutter suitable for serial production where process stability is essential. Fast insert changes and secure clamping for less downtime Compatibility with ADKT 1505 indexable inserts and the use of a Torx clamping screw streamline maintenance routines. The included screw specification M4x10 and key T15 enable secure fastening and repeatable seat location, reducing the risk of misalignment during insert changes. This arrangement shortens non-productive time and supports a consistent chip evacuation pattern, contributing to efficient cycle times and dependable machining results. Compact handling, reliable performance and workshop integration With a 60 mm cutting length, 150 mm overall length and a weight of 0.887 kg, the cutter balances reach and rigidity for many standard milling tasks. The three cutting edges distribute cutting loads evenly, improving feed stability and enabling higher effective metal removal rates under the right conditions. Specified dimensions and a clear compatibility profile make stock management and toolholder selection straightforward for procurement and production planners. Contact Metav Werkzeuge for tailored application advice and supply from Emmerich — their specialists can confirm fitment and delivery for industrial workflows Technical data Article number: S315TM Manufacturer: Teknik Makina Shaft diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.887 kg Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 FAQ Which indexable inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; the tool is supplied for use with ADKT 1505 inserts from ISCAR. How is the insert secured and which tool is required? Inserts are clamped with a Torx screw specified as M4x10, tightened using a T15 Torx key for secure, repeatable fixation. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, which balance cutting forces to reduce vibration and improve surface finish during milling operations. What are the key dimensions relevant for toolholding and reach? Key dimensions: Ø32 mm shank diameter, 60 mm cutting length and 150 mm overall length, which guide holder selection and reach planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, simple insert change-out and precise geometry to maintain steady milling productivity; order the tool via Metav Werkzeuge or consult our specialists for application advice. S314TM shaft cutter by Teknik Makina – 30 mm diameter, for ADKT 1505 indexable inserts The S314TM shaft cutter is a purpose-built indexable-insert milling tool for productive CNC machining, designed to accept ADKT 1505 inserts and to deliver stable cutting performance in repeated operations 30 mm cutting diameter for stable milling Compatible with ADKT 1505 indexable inserts 25 mm shank diameter for secure clamping Three cutting edges for efficient material removal Predictable metal removal with compact, rigid design The S314TM is engineered to provide consistent cutting through a combination of a 30 mm nominal diameter and a 25 mm shank, yielding higher stiffness at the toolholder interface and reduced vibration during engagement. With a 50 mm cutting length and a 150 mm overall length, the cutter offers a balance between reach and rigidity that suits both short-stepped finishing and deeper shoulder milling operations. The three-flute layout improves radial balance and ensures steady chip load per tooth, which in turn supports stable cycle times and repeatable component quality across production batches. Fast indexable-insert handling for minimal downtime Tool change and maintenance have been simplified by the standardised clamping design: the indexable inserts are secured with an M4x10 Torx screw and adjusted using a T15 key, enabling quick insert replacement and reliable seat contact every time. Compatibility with ADKT 1505 grade plates—commonly supplied by manufacturers such as ISCAR—means spare parts are widely available and changeovers are straightforward. This reduces unproductive machine idle time, allowing production planners to maintain throughput without complex tool regrinds or reconditioning. Suited to productive CNC milling operations The cutter’s geometry, incorporating three cutting edges, supports efficient chip evacuation and balanced cutting forces, which contributes to a predictable surface finish and longer insert life when parameters are set correctly. The bodied construction and measured mass (approx. 0.596 kg) give a favourable dynamic response in typical milling spindles, while the indexable-insert system keeps per-edge costs low and consistent. For job shops and in-house production lines seeking to streamline tooling logistics, this design offers a pragmatic blend of performance, serviceability and inventory friendliness. Contact Metav Werkzeuge for availability of the Teknik Makina S314TM shaft cutter and tailored procurement advice from our Emmerich team Technical data Article number: S314TM Manufacturer: Teknik Makina Product type: Shaft cutter for indexable inserts Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 Facts Diameter: 30 mm Cutting edges: 3 Shank diameter: 25 mm Cutting length: 50 mm Overall length: 150 mm Weight: 0.596 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts M4x10 Torx clamping screw T15 Torx key interface SKU S314TM Brand: Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; compatible grades from established suppliers such as ISCAR are commonly used with the S314TM. How are the inserts secured and serviced? Inserts are clamped with an M4x10 Torx screw and can be tightened or released with a T15 key for rapid change-out and straightforward maintenance of the S314TM shaft cutter. What cutting profile and edge count does the tool offer? The tool is supplied with a 30 mm diameter and three cutting edges, optimised for balanced cutting forces and effective chip removal in indexable-insert milling. Is the cutter suitable for CNC production runs? Yes, the combination of a stiff 25 mm shank, standardised inserts and simple clamping makes the cutter well suited to repetitive CNC milling operations where quick insert changes and predictable performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a rigid 25 mm shank and compatibility with ADKT 1505 indexable inserts, this milling tool delivers stable cutting and quick insert changes for continuous production. Benefit from precise tool clamping, straightforward maintenance and expert advice — order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft-mounted milling cutter S312TM — 25 mm shank, for ADKT 1505 indexable inserts (Teknik Makina) The Shaft-mounted milling cutter S312TM is designed for shank-mounted milling operations using ADKT 1505 indexable inserts, offering a compact 150 mm overall length for versatile workshop use. 25 mm shank diameter for stable clamping Compatible with ADKT 1505 indexable inserts Two cutting edges for efficient material removal Supplied with M4x10 Torx screw and T15 key Stable shank design for precise machining The solid 25 mm shank and compact 150 mm overall length combine to reduce run-out and vibration during milling, which directly improves surface finish and dimensional consistency. A balanced configuration with two cutting edges ensures symmetric cutting forces, reducing chatter on standard toolholders and supporting consistent cycle times. The modest mass of 0.55 kg contributes to easier handling and rapid tool changes without compromising rigidity. Machine shops seeking repeatable results will value the combination of stable clamping and a short overhang for close-tolerance milling. Reliable insert system reduces downtime Designed for ADKT 1505 indexable inserts, the tool accepts widely available carbide inserts for fast replacement and predictable cutting performance. The insert pocket and secure fastening with the supplied M4x10 Torx screw (Torx key T15) make replacement straightforward and minimise downtime. Using established insert geometries means stocks of cutting grades from preferred manufacturers such as ISCAR can be used, so tooling inventory is easier to manage. The result is a pragmatic solution that supports steady production and simpler maintenance cycles. Easy maintenance and seamless workshop integration The straightforward construction and standard fastening hardware allow quick on-bench service and reduce the need for specialised tooling. Compatibility with common indexable inserts and a standard shank format simplifies integration into existing tool sets and reduces the number of adapters required. Focusing on functional reliability rather than cosmetic extras, this cutter is a practical component for mixed-production environments where changeover speed and predictable performance matter most. For dependable milling performance with a 25 mm shank, contact Metav Werkzeuge for personalised technical advice on the S312TM cutter from Teknik Makina — call +49 2822 7131930 or email info@metav-werkzeuge.com for further information and procurement support. Technical data SKU: S312TM Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Weight: 0.55 kg Diameter: 25 mm Cutting edges: 2 Special features Compatible with ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 included Torx key T15 included FAQ Which insert type is required for this cutter? The S312TM shaft-mounted milling cutter uses ADKT 1505 indexable inserts; compatible grades from ISCAR or other suppliers can be fitted. How is the insert secured to the cutter? Inserts for the S312TM are clamped with the supplied M4x10 Torx screw, tightened using the T15 key for secure seating. What are the shank and overall dimensions? This cutter features a 25 mm shank, a cutting length of 60 mm and an overall length of 150 mm. How many cutting edges does the tool have? The S312TM is supplied with two cutting edges, offering balanced cutting forces and efficient material removal. Is the tool compatible with inserts from major manufacturers? Yes, the cutter accepts ADKT 1505 inserts and is compatible with widely used insert suppliers such as ISCAR, facilitating stock commonality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines reliable indexable-insert compatibility, a stable shank design and straightforward maintenance for continuous milling performance; order via Metav Werkzeuge or consult our specialists for application advice. S310TM Shank milling cutter — for ADKT 1505 indexable inserts, Ø 40 mm, 4‑cut (Teknik Makina) The S310TM shank milling cutter is a robust insert-milling solution designed for machines that accept ADKT 1505 indexable inserts and require a compact, high-stability tool for repeatable machining tasks. Compatible with ADKT 1505 indexable inserts Ø 40 mm cutting diameter, 4 cutting edges Shank Ø 32 mm with 45 mm cutting length Secured with M4x10 Torx screw (T15 required) Reliable indexable-insert milling for repeatable throughput The use of ADKT 1505 indexable inserts brings the economic advantage of replaceable cutting edges without changing the whole tool body. By combining a four‑cut configuration with a 40 mm nominal diameter, this shank cutter reduces cycle time through stable chip formation and a balanced cut pattern. For production environments that prioritise predictable tool life and fast insert changes, the result is lower tooling cost per component and less unplanned downtime. The modular insert system also simplifies spare-part logistics when multiple cutters share the same insert family. Mechanical stability that supports precise machining The tool’s Shank Ø 32 mm and a total length of 120 mm provide a stiff connection to the spindle, improving concentricity and reducing vibration during heavy engagement. A 45 mm cutting length allows adequate axial engagement for many slotting and peripheral milling operations while keeping the cantilever short enough to preserve accuracy. The combination of these dimensions supports consistent surface finish and dimensional repeatability, which is essential for workshop and light-production applications where reproducible results are required shift after shift. Fast, secure clamping to keep maintenance time low Insert retention is achieved with a M4x10 Torx screw, tightened with a T15 key, enabling quick and secure insert changes with standard tooling. This straightforward fastening method minimises handling time and reduces the risk of incorrect seating, which helps maintain cutting geometry and overall process stability. Clear screw specification also facilitates maintenance planning and spare-part provisioning for maintenance teams and toolroom staff. Suitable for workshop and production toolrooms Built as a standardised shank milling cutter for indexable inserts, the tool suits workshops and production lines that prefer modular tooling concepts and easy inventory management. Compatibility with ISCAR-manufactured inserts broadens sourcing options and ensures access to a wide range of grades and geometries for future process optimisation. The design is aimed at users who require a pragmatic balance between mechanical rigidity and economical regrindable insert solutions. For a recommended fit in production or toolroom setups, rely on Teknik Makina’s S310TM shank milling cutter and contact Metav Werkzeuge for specification guidance and supply from their Emmerich facility. Technical data Article number: S310TM Brand: Teknik Makina Designation: Shank milling cutter for ADKT 1505 indexable inserts Alternate designation: for ADKT 1505 Indexable Inserts eClass: 21180806 ETIM: EC011860 Facts Cutting diameter: 40 mm Number of cutting edges: 4 Shank diameter: 32 mm Cutting length: 45 mm Overall length: 120 mm Weight: 0.759 kg Special features Compatible inserts: ADKT 1505 Insert manufacturer compatibility: ISCAR Fastening screw specification: M4x10 Torx Required Torx key: T15 FAQ What insert type does this cutter use? The cutter accepts ADKT 1505 indexable inserts; this insert family is used with the S310TM shank milling cutter. Is the tool compatible with ISCAR inserts? Yes, the S310TM is specified as compatible with ISCAR-manufactured ADKT 1505 indexable inserts. Which torque key is required for insert changes? Insert retention uses an M4x10 Torx screw; a T15 key is required to secure or remove the inserts on the S310TM. What are the main dimensions to check for machine compatibility? Key dimensions are a 40 mm cutting diameter, Shank Ø 32 mm, 45 mm cutting length and 120 mm overall length, which determine fit in the spindle and allowable overhang. Can this cutter be used across different production machines? The S310TM is a standard shank milling cutter designed for machines accepting the stated shank diameter and insert type; verify spindle and holder compatibility prior to use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision shank milling cutter that combines compatibility with ADKT 1505 indexable inserts, a 35 mm cutting diameter and a robust 25 mm shank for stable toolholding — order directly via Metav Werkzeuge or contact the consultants for specification support. S308TM Shank milling cutter — 35 mm diameter, for ADKT 1505 indexable inserts (Teknik Makina) S308TM is a shank milling cutter designed for high-efficiency indexable-insert milling in CNC applications, compatible with ADKT 1505 inserts for consistent chip formation and quick insert changes. For ADKT 1505 indexable inserts (ISCAR compatible) 35 mm cutter diameter 25 mm shank diameter, 120 mm overall length Precision insert compatibility for repeatable results The indexable inserts concept enables rapid tool changes and consistent edge geometry across production runs. Matched to ADKT 1505 inserts and compatible with ISCAR systems, this milling tool supports predictable cutting behaviour and reduced setup time. The modular insert design separates the cutting edge from the tool body, lowering ongoing tooling costs and simplifying maintenance without sacrificing repeatability. Stable shank and optimised geometry for higher material removal With a 25 mm shank and 120 mm overall length, the cutter offers rigid clamping and controlled overhang, improving stability during aggressive passes. The three cutting edges and a 35 mm diameter provide balanced chip distribution and smoother radial engagement, which together reduce vibration and extend insert life. The tool is supplied with a Torx M4x10 screw and requires a T15 key for secure insert fastening, ensuring reliable clamping torque and secure seat location. Practical benefits on the machine and in process planning The tool geometry is tuned for efficient chip evacuation and predictable surface finish, making it suitable for a range of milling tasks on medium-duty CNC machines. Operators benefit from shorter tool-change cycles and consistent surface quality, while process planners gain the ability to rely on standardised insert types for easier inventory and cost control. The lightweight construction (approx. 0.5 kg) keeps spindle loads moderate, supporting longer cycle times without unnecessary mechanical strain. Suitable applications and productivity gains Ideal for batch production and job-shop environments that favour insert-based tooling, this cutter supports fast indexable-insert swaps and repeatable part quality. The combination of a rigid shank, defined cutting length and standardised insert compatibility helps reduce downtime and improves throughput on milling operations where changeover speed and consistent results matter most. Specification-driven buyers will appreciate the clear mechanical data and the compatibility with established insert systems. For a production-ready milling solution from Teknik Makina, request the S308TM specification sheet or technical advice from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and supply options. Technical data Article number: S308TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 35 mm Cutting edges: 3 Shank diameter: 25 mm Cutting length (shank): 45 mm Overall length: 120 mm Weight: 0.5 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10, Torx key T15 SKU: S308TM FAQ What insert type is required for this cutter? The cutter uses ADKT 1505 indexable inserts; it is compatible with ISCAR-style inserts designed for that seat form. Can the tool be used on standard CNC milling spindles? Yes, the shank design and 25 mm diameter make the tool suitable for common milling spindle holders that accept a 25 mm straight shank. How many cutting edges does the milling cutter have and what is the benefit? The tool has three cutting edges, which improves chip balance and permits smoother cutting engagement compared with fewer-edge variants. Is the cutter supplied with fastening hardware? The S308TM is supplied with a Torx M4x10 screw specification and requires a T15 key for insert clamping. What applications benefit most from this cutter? Batch milling, slotting and light face milling operations where fast insert changes, predictable surface finish and indexable-insert economics are priorities will benefit most. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision compatibility and easy maintenance to keep turning processes efficient and predictable; order the toolhead directly via Metav Werkzeuge or consult their technical team for application-specific advice. Eckmesserkopf T208TM — 90° turning head for ADKT 1505 indexable inserts by Teknik Makina Eckmesserkopf T208TM is a compact 90° turning head designed for heavy-duty edge engagement and reliable clamping in short-overhang turning applications 90° cutting angle for square turning Compatible with ADKT 1505 inserts 40 mm shank for stable clamping Torx screw M4x10, Torx key T15 included Precision and stability for consistent turning results The corner cutting head delivers repeatable geometry thanks to its 90° cutting angle and a sturdy 40 mm shank, which together reduce vibration during engagement and support accurate chip formation. Designed for ADKT 1505 indexable inserts, the toolhead ensures consistent cutting edges and predictable tool life when paired with suitable inserts from ISCAR. The combination of robust shank diameter and compact overall length provides a stable interface with the toolpost, helping to maintain finish quality and dimensional control across production runs. Faster tool change and lower setup complexity Quick and reliable insert clamping is achieved with the supplied M4x10 Torx screw and the matching T15 key interface, allowing rapid insert replacement and minimising machine downtime. The head accepts ADKT 1505 indexable inserts, so spare parts and replacements are standardised for efficient inventory management. Reduced setup time translates into better machine utilisation and a faster return on operational resources, making the head suitable for both small-batch workshops and larger production lines where changeover speed matters. Designed for workshop durability and compact integration With a nominal diameter of 125 mm, an overall length of 62 mm and a weight of 0.272 kg, the component combines compact form with practical handling characteristics. The head features nine defined cutting edges, arranged to support the intended cutting geometry and to balance load distribution across the insert. Constructed for integration into conventional toolholders with a 40 mm mounting interface, the unit fits existing setups with minimal adaptation, delivering a straightforward upgrade path for machining centres and lathes requiring square turning capability. Contact Metav Werkzeuge for application advice or to source this Teknik Makina turning head; Metav’s specialists in Emmerich are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: T208TM Manufacturer: Teknik Makina Data Diameter: 125 mm Shank diameter (d): 40 mm Overall length: 62 mm Weight: 0.272 kg Cutting angle: 90° Number of cutting edges: 9 Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key T15 FAQ What insert type does this turning head accept? The turning head accepts ADKT 1505 indexable inserts; it is supplied to work with standard ADKT 1505 geometries. Is the head compatible with ISCAR inserts? Yes, the design is compatible with inserts from ISCAR and other manufacturers that follow the ADKT 1505 specification. What is the shank diameter and why does it matter? The shank diameter is 40 mm; a larger shank improves clamping rigidity, which in turn reduces vibration and improves surface finish consistency. Which Torx screw and key are required for insert fastening? Insert fastening uses an M4x10 Torx screw and a T15 Torx key, both referenced in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise 90° cutting angle and a 32 mm shank for stable clamping and consistent shoulder finishes; compatibility with ADKT 1505 indexable inserts (ISCAR) ensures fast tool changes and predictable process behaviour. Order through Metav Werkzeuge or request technical clarification from our advisors for seamless integration into existing turning setups. Corner turning head T207TM — 90° toolholder for ADKT 1505 indexable inserts, 32 mm shank (Teknik Makina) A Corner turning head T207TM engineered for accurate shoulder and face turning operations in CNC and manual lathes using ADKT 1505 indexable inserts. 90° cutting angle for shoulder turning 32 mm shank diameter for rigid mounting Compatible with ADKT 1505 inserts (ISCAR) Secured by M4x10 Torx screw (T15) High rigidity for precise shoulder finishes The T207TM delivers repeatable shoulder geometry by combining a compact head with a robust shank. The 32 mm shank contributes to reduced vibration and enhanced tool life, while the 90° cutting angle is optimised for square shoulder and facing operations where consistent surface finish and dimensional control are required. For production environments, this stability translates into fewer reworks and improved cycle-time predictability, making the toolholder a rational choice when throughput and accuracy matter. Quick indexable insert handling and secure clamping Designed for ADKT 1505 indexable inserts, the holder accepts common commercial grades and geometries, enabling fast recovery of cutting edge performance. The insert retention is managed with an M4x10 Torx screw, tightened or released with a T15 key, which simplifies insert changes and maintenance routines. The combination of standardised fixing hardware and widespread insert availability reduces downtime and simplifies spare-part logistics, supporting efficient shop-floor workflows. Practical design for workshop and industrial use With a head diameter of 100 and an overall length of 52, the toolhead balances accessibility and strength for a wide range of turning tasks. The component’s mass (approximately 1.546 kg) provides inherent damping for interrupted cuts, while the geometry supports both roughing and finishing passes when paired with the appropriate insert grade. Compatibility with ISCAR-format ADKT 1505 inserts ensures flexible tooling strategies across different materials and applications without the need to redesign tool stations. For shoulder turning tasks that demand repeatability and fast insert exchange, contact Metav Werkzeuge to check availability and request detailed integration advice for the Teknik Cutting Tools corner turning head T207TM via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: T207TM Manufacturer: Teknik Makina / Teknik Cutting Tools Diameter: 100 mm Shank diameter: 32 mm Overall length: 52 mm Weight: 1.546 kg Cutting angle: 90° Number of cutting edges: 8 Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Fastening screw: M4x10 Torx Required Torx key: T15 FAQ What inserts fit this turning head? The corner turning head accepts ADKT 1505 indexable inserts; it is designed for standard ADKT 1505 geometries and works with ISCAR-format inserts. Is the holder suitable for heavy-duty shoulder turning? The robust design, 32 mm shank and 90° cutting angle make the holder appropriate for demanding shoulder and face turning tasks where rigidity and repeatability are priorities. Which tool secures the insert and what size is required? Insert retention is via an M4x10 Torx screw; a T15 Torx key is used to tighten or release the screw for insert changes. Can this head be used on most CNC lathes? The 32 mm shank is intended for tooling systems that accept that diameter; the head is suitable where the machine turret or holder accepts a 32 mm interface and the required overhang is within the machine’s capability. What benefit does the 90° cutting angle provide? A 90° angle provides a true shoulder geometry and reliable face finishes, reducing secondary operations for square-edged turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Characteristics: Order Number: T206TM Item: Face Mill usable with ADKT 1505 Indexable Inserts of ISCAR Brand: Teknik Makina Numbers and Data: Diameter: 80mm Cutting Edges: 7 Weight: 1.152kg Total length: 52mm Diameter Connection: 27mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a purpose-built 90° cutting head that combines secure Torx fastening, compatibility with ADKT 1505 indexable inserts and a compact 22 mm shank for stable mounting and repeatable results; order directly via Metav Werkzeuge or consult our specialists for application matching. Corner tool head T204TM – 90° cutting angle, for ADKT 1505 indexable inserts (Teknik Cutting Tools) The Corner tool head T204TM is a compact indexable-insert holder designed for precise 90° shoulder and corner machining with ADKT 1505 inserts in industrial turning and milling setups 90° cutting angle for shoulder machining Compatible with ADKT 1505 indexable inserts 22 mm shank diameter for secure mounting M4x10 Torx screw with T15 drive Consistent shoulder machining with indexable inserts The T204TM tool head delivers a 90° cutting angle and is optimised for shoulder and corner operations where perpendicular faces and repeatable dimensions matter. By accepting ADKT 1505 indexable inserts, the holder supports quick insert changes and reliable repositioning, which reduces downtime and maintains consistent cycle times. The combination of precise insert seating and rigid clamping ensures improved dimensional repeatability, lowering scrap rates and helping production hit tolerance windows more consistently. Secure clamping and compact geometry for reduced vibration A 22 mm shank and compact overall length of 45 mm create a well-balanced assembly that reduces overhang and vibration during heavy cuts. Fastening is achieved with an M4x10 Torx screw and T15 drive, providing a secure, repeatable clamp force that simplifies tool setting and maintenance. The holder’s compact 63 mm diameter profile and modest mass (0.565 kg) contribute to stability on the turret or arbor, improving surface finish and extending insert life under steady operational conditions. Compatibility and operational efficiency Designed for compatibility with ISCAR inserts and specified for ADKT 1505, the head supports multi-edge indexing—there are 6 cutting edges referenced—so inserts can be rotated to a fresh edge without changing the insert grade or geometry. This approach reduces inventory complexity and cuts consumable costs per component. Clear mechanical interfaces and standardised fastening mean the unit integrates smoothly into existing tool portfolios, enabling predictable cutting performance and faster job changeovers. Built for workshop reliability and supported supply The holder’s robust design focuses on dependable everyday use in production and job-shop environments. Backed by supply from Emmerich, Metav Werkzeuge emphasises steady availability and application advice to help match the component to specific machines and inserts. Technical documentation and measured dimensions allow fitment checks before installation, supporting a smoother commissioning process and reducing the risk of incorrect tooling choices. For specification checks, availability and tailored recommendations on the Teknik Cutting Tools Corner tool head T204TM, contact Metav Werkzeuge for expert advice and fast supply from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: T204TM Manufacturer: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Compatible with: ISCAR inserts Torx screw: M4x10 Torx key size: T15 Facts Shank diameter: 22 mm Weight: 0.565 kg Diameter: 63 mm Overall length: 45 mm Cutting angle: 90° Cutting edges: 6 Special features For ADKT 1505 indexable inserts 90° cutting geometry Compact, balanced design Secure Torx fastening Suitable for shoulder machining FAQ Which inserts fit this tool head? The holder is specified for ADKT 1505 indexable inserts and is compatible with ISCAR-style inserts following that designation. What fastener is required to secure the insert? Fastening uses an M4x10 Torx screw with a T15 drive; the design provides repeatable clamp force for reliable seating. Will the tool head fit my turret with a 22 mm bore? The tool head has a 22 mm shank, designed for secure mounting where that shank diameter is supported. How does the design reduce vibration and improve finish? Compact geometry (63 mm diameter, 45 mm overall length) and a balanced mass (0.565 kg) minimise overhang and vibration, improving surface finish and insert life. Can inserts be indexed to extend service life? Yes. The assembly supports multi-edge indexing of the ADKT 1505 inserts, allowing rotation to fresh cutting edges and reducing consumable change frequency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, precise 90° cutting geometry and simple tool change for uninterrupted turning operations — order the component via Metav Werkzeuge or consult our technical team for integration advice. Eckmesserkopf T202TM — 90° corner turning head for ADKT 1505 indexable inserts (Teknik Makina) The Eckmesserkopf is a compact 90° turning head optimised for external shoulder and facing operations with ADKT 1505 indexable inserts, engineered for reliable integration into workshop and CNC tool systems. Corner head »Eckmesserkopf« for ADKT 1505 inserts 90° cutting angle for square and facing operations Ø50 mm body with 22 mm shank diameter Torx M4x10 fastening, T15 key required Accurate 90° geometry for repeatable shoulder machining The corner turning head delivers a defined 90° cutting geometry, which ensures consistent shoulder faces and square corners on turned parts. By accepting standard ADKT 1505 indexable inserts, the head provides a quick-change solution that reduces set-up time and supports predictable tool life. The design promotes a stable cutting position that reduces chatter and contributes to improved surface finish, making it suitable for batch production where dimensional repeatability is critical. Stable mounting and secure fastenings for vibration control Constructed with a compact Ø50 mm body and a 22 mm shank, the tool head offers a rigid interface to the toolholder, limiting deflection under load. The insert is retained by a Torx M4x10 screw tightened with a T15 key, ensuring a secure clamp and consistent seat pressure every change. The component’s modest mass of 0.394 kg and a total length of 45 mm facilitate rapid tool changes while maintaining the stiffness required for fine turning and facing tasks. Designed for compatibility with common inserts and systems This indexable insert head is specified for ADKT 1505 inserts and is listed as compatible with ISCAR insert types, enabling use of widely available cutting grades and geometries. The standardised insert format simplifies inventory management and makes the head a practical choice for workshops looking to harmonise tooling across multiple lathes. The head’s configuration supports straightforward conversion between roughing and finishing inserts to match material and process requirements. Practical handling that reduces downtime With a clear fastening method and compact dimensions, maintenance and insert replacement are fast and repeatable. The head features five dedicated cutting-edge positions for efficient indexing, reducing the need for spare tool bodies and lowering overall tooling costs. Its balanced design aids handling during set-up, and the standardised mounting dimensions make it straightforward to integrate into existing tool posts or turret systems without elaborate adapters. For precise corner turning with proven ADKT 1505 compatibility, contact Metav Werkzeuge GmbH for ordering and technical guidance — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T202TM Manufacturer: Teknik Makina Core specifications Diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.394 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key T15 required 22 mm shank for standard holders FAQ What insert type does the turning head accept? The corner turning head accepts ADKT 1505 indexable inserts, offering compatibility with common chipbreaker and grade variants. Is the head compatible with ISCAR inserts? Yes, the head is listed as compatible with ISCAR insert types for ADKT 1505, enabling use of widely available cutting grades. What fastening hardware is required for insert clamping? Insert clamping uses a Torx M4x10 screw tightened with a T15 key to ensure secure and repeatable retention. What are the mount dimensions for the tool head? The tool head has a 22 mm shank diameter and a body diameter of Ø50 mm, facilitating integration into standard holders. How many indexing positions are available on the head? The component provides five cutting edges, allowing multiple indexings before insert replacement is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, a defined 90° cutting geometry and compatibility with ADKT 1505 indexable inserts to maintain steady cycle times and predictable tool life; order the Corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head T200TM — 90° tool head for ADKT 1505 indexable inserts (Teknik Makina) A Corner tool head T200TM engineered for turning and facing operations with ADKT 1505 indexable inserts, delivering repeatable 90° cutting performance in industrial production environments 90° cutting geometry for precise facing Compatible with ISCAR ADKT 1505 inserts 16 mm shank for secure clamping Four cutting edges for extended service life Accurate 90° geometry for repeatable faces and shoulders The T200TM is built around a 90° cutting geometry that simplifies setup for facing and shoulder operations. By using standard ADKT 1505 indexable inserts (compatible with ISCAR), the head provides a predictable cutting line and consistent surface finish. The combination of defined insert seating and the head’s rigid interface reduces vibration and improves dimensional repeatability, which translates into fewer reworks and steadier production throughput. Secure clamping and straightforward maintenance for reliable shifts Clamping integrity is central to performance: the head features a 16 mm shank that ensures stable seating in standard toolholders and a fixation system secured with an M4x10 Torx screw operated by a T15 key. This arrangement keeps the insert pocket firmly closed under load and facilitates fast index changes. Routine service is minimal — the Torx connection limits cam-out and wear, so maintenance intervals are extended without sacrificing operational safety. Compact design engineered for industrial use A compact footprint supports versatile machine integration: the head measures 40 mm diameter with a 45 mm overall length and weighs 0.27 kg, making it suitable where clearance and balance are critical. The small mass contributes to lower centrifugal forces at speed and helps preserve spindle bearings, while the robust construction and first-class metalworking in the component ensure long in-service life. The presence of four cutting edges on the selected inserts allows multiple indexes per insert, improving cost-efficiency per cutting edge. Practical application advice to speed setup and reduce downtime The indexable-head concept streamlines production: replace worn inserts quickly and restore cutting performance without reclamping the entire assembly. For facing, ensure the toolholder accepts the 16 mm shank and that the insert seat is clean before fitting a fresh ADKT 1505 insert. Correct torque on the M4x10 Torx screw and the use of the T15 key secure the insert and prevent micro-movement during heavy cuts. This pragmatic approach to handling reduces set-up time and keeps machines cutting rather than idling. Contact Metav Werkzeuge today for personalised application support on the Teknik Makina T200TM 90° corner tool head and secure delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T200TM Brand: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Shank diameter: 16 mm Overall length: 45 mm Diameter: 40 mm Weight: 0.27 kg Cutting angle: 90° Cutting edges: 4 Torx screw: M4x10 Torx key: T15 Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Application: Turning / facing with indexable inserts Design: 90° corner head Notes: First-class metalworking, long service life FAQ What inserts fit this turning head? The Corner tool head T200TM is designed for ADKT 1505 indexable inserts; it is compatible with inserts from ISCAR marked ADKT 1505. Is a special key required to change the insert? An M4x10 Torx screw secures the insert; a T15 Torx key is used to tighten and release it on the T200TM. Which toolholder accepts the head’s shank? The head has a 16 mm shank diameter and requires a toolholder that accepts a 16 mm shank for safe clamping and correct tool alignment. What benefits do four cutting edges provide? Using inserts with four usable edges increases effective cutting life per insert and reduces index-change frequency, improving uptime with the T200TM head. Is the head suitable for heavy-duty facing? The compact, rigid design and secure Torx clamping make the head appropriate for standard facing loads; ensure the machine and holder match the required cutting parameters. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com