ADMX 070216 Indexable Insert for Stahl - MetavCUT

Take advantage of a compact, high-stability milling solution that combines standardised ADMX 0702 compatibility with a robust M16 screw-in design and an efficient Ø32 mm cutting diameter for consistent machining results; order the VT203TM directly via Metav Werkzeuge or consult our specialists for integration advice. VT203TM Screw-in milling cutter (Ø32 mm) for ADMX 0702 indexable inserts — Teknik Makina A VT203TM screw-in milling cutter engineered for reliable face and shoulder milling with ADMX 0702 indexable inserts, suited to production and maintenance environments where repeatable geometry and quick insert changes matter 32 mm diameter for compact milling M16 screw-in shank with 23 mm thread depth Fits ADMX 0702 indexable inserts by Pramet Eight cutting edges with 90° cutting angle Consistent results through standardised insert compatibility The screw-in design delivers a stable connection between tool body and machine by using a standard M16 thread and a defined 23 mm thread depth, which reduces runout and vibration during cuts. Compatibility with ADMX 0702 indexable inserts from Pramet allows for predictable chip control and straightforward replenishment of cutting edges. This standardisation simplifies tool management in busy shops and supports repeatable surface quality across batches. Geometry and edge count tuned for productivity A compact Ø32 mm tool body combined with a 43 mm cutting height and eight cutting edges means more usable edge length per cutter and longer intervals between indexings. The 90° cutting angle produces square shoulder finishes and helps to maintain dimensional stability during heavy radial engagement, while the multi-edge layout spreads wear and supports higher material removal rates. For operators new to indexable tooling, the cutting angle denotes the orientation of the cutting face relative to the workpiece and determines finish and load distribution. Practical assembly and low downtime in service routines Service and insert changes are expedited by the use of a single Torx clamping screw (Torx screw M2x4.2) secured with a T6 key, reducing maintenance time compared with multi-component clamps. The tool’s overall length of 66 mm and a net weight of 0.235 kg make handling straightforward when fitting into compact toolholders or storage systems. The screw-in arrangement also allows quick replacement of the cutter body without altering the machine spindle setup, supporting fast tool changes in production environments. For fast integration and supply from our European quality hub, contact Metav Werkzeuge in Emmerich for tailored advice on the VT203TM screw-in milling cutter — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholders, insert choices and delivery timelines. Technical data Article number: VT203TM Name: Screw-in milling cutter for ADMX 0702 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core measurements Diameter: 32 mm Overall length: 66 mm Cutting height: 43 mm Thread depth: 23 mm Weight: 0.235 kg Cutting edges: 8 Cutting angle: 90° Design & special features Screw-in design with M16 thread Torx screw M2x4.2 Torx key T6 Fits ADMX 0702 indexable inserts Compatible with inserts by Pramet FAQ What insert type does this cutter accept? The VT203TM accepts ADMX 0702 indexable inserts, a standard size compatible with Pramet-manufactured grades. Is the tool suitable for shoulder milling and face operations? Yes, the screw-in cutter’s 90° cutting angle and Ø32 mm body are designed for both face and shoulder milling tasks. How many cutting edges are available before indexing? The tool body presents eight cutting edges, extending effective edge life and reducing the frequency of indexings. Which fastening hardware is used for the insert clamp? A single Torx screw (M2x4.2) secures the insert; the corresponding key size is T6, enabling quick and secure clamp changes. What thread and mounting interface does the cutter use? The cutter uses an M16 screw-in shank with a 23 mm thread depth for a positive and repeatable mounting interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust M10 screw-in connection, a compact Ø20 mm cutting diameter and five cutting edges to maintain steady production; order the VT201TM screw-in cutter via Metav Werkzeuge or consult our specialists for compatibility advice. VT201TM screw-in cutter — Ø20 mm, M10 thread for ADMX 0702 indexable inserts (Teknik Makina) The VT201TM screw-in cutter is a compact milling head engineered for reliable shoulder and face milling with ADMX 0702 indexable inserts, ideal for industrial and workshop toolrooms requiring quick insert changes and secure fastening. M10 screw-in connection Ø20 mm cutting diameter Five cutting edges for stable cutting Compatible with ADMX 0702 inserts Compact design for consistent results The VT201TM is designed to deliver consistent cycles through a compact, lightweight construction. The combination of a Ø20 mm cutting diameter and a total length of 49 mm reduces tool overhang and improves rigidity, which in turn lowers vibration and improves surface finish. With a net weight of 0.08 kg, the head contributes minimally to spindle imbalance while enabling faster tool changes and reduced set-up times. This design supports predictable machining performance and helps maintain process stability on small to medium machining centres. Secure fastening and straightforward insert replacement Fastening is achieved with a Torx screw M2x4.2 using a T6 key, enabling a secure clamping force that keeps the insert rigid under load. The screw-in interface with an M10 thread gives a reliable mechanical connection to the toolholder, simplifying assembly and removal without the need for additional locking devices. Compatibility with ADMX 0702 indexable inserts means commonly available inserts can be used, reducing stock complexity. The robust clamp system lowers the risk of insert displacement, supporting uninterrupted machining and predictable tool life. Geometry tailored for precise face and shoulder milling The cutter’s geometry features a 90° cutting angle, which is optimised for square shoulder milling and accurate contouring operations. Five cutting edges distribute cutting forces across multiple points of contact, reducing individual insert load and improving heat dissipation. The result is a smoother cutting action and longer insert service intervals compared with fewer-edge heads in the same diameter class. For operations that prioritise repeatable edge quality and dimensional control, this head’s geometry offers a measurable improvement in cycle reliability. Practical supply and expert backing from Metav Sourcing the VT201TM through Metav Werkzeuge brings immediate supply-chain advantages: central European stock and experienced technical support reduce lead times and uncertainty. Metav’s emphasis on accessible precision and a broad product range helps workshop managers consolidate suppliers and rely on consistent quality standards. If selection between insert grades or holder types is required, Metav’s team can provide tailored recommendations to align the cutter’s performance with the machining task and production cadence. For tailored advice and secure supply of the Teknik Cutting Tools VT201TM screw-in cutter, contact Metav Werkzeuge for specification support and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VT201TM Product: Screw-in cutter for ADMX 0702 indexable inserts Manufacturer: Teknik Makina Compatible insert manufacturer: Pramet Facts Diameter: 20 mm Thread: M10 Thread length: 19 mm Cutting height: 30 mm Cutting edges: 5 Overall length: 49 mm Weight: 0.08 kg Cutting angle: 90° Torx screw: M2x4.2 Torx key: T6 Special features Compatible with ADMX 0702 indexable inserts Inserts: ADMX 0702 Fastening: Torx screw M2x4.2 Fastening tool: T6 key FAQ Is the VT201TM compatible with ADMX 0702 inserts? Yes. The VT201TM screw-in cutter is specified for ADMX 0702 indexable inserts and accepts those insert dimensions. What thread does the cutter use for mounting? The cutter mounts with an M10 screw-in thread and a thread length of 19 mm as specified for the VT201TM. Which tool secures the insert and what screw is used? A Torx screw M2x4.2 secures the insert; tightening and removal are performed with a T6 Torx key. What are the cutter’s dimensions and weight? The head has a Ø20 mm cutting diameter, an overall length of 49 mm, a cutting height of 30 mm and weighs 0.08 kg (SKU VT201TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of compact, secure mounting and 90° cutting geometry to achieve precise shoulder cuts in confined setups; combine low mass and easy insert replacement for shorter downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for delivery and suitability advice. Screw-in milling cutter VT200TM – 16 mm diameter, 90° cutting angle by Teknik Makina A compact screw-in milling cutter VT200TM designed for turning and face operations with ADMX 0702 indexable inserts, engineered for tight-access machining and rapid insert changes. 16 mm diameter for compact machining M8 screw-in thread, 18 mm thread length 90° cutting angle for square shoulder cuts Four cutting edges for balanced cutting action Compatible with Pramet ADMX 0702 inserts Precise performance in confined spaces The VT200TM offers a 16 mm body and an overall length of 41 mm, which reduces overhang and improves rigidity in restricted tool positions. The small mass of 0.041 kg lowers centrifugal forces and vibration, resulting in steadier cutting conditions and improved surface finish. For operations where access and stability matter, the compact geometry enables repeatable shoulder and facing cuts while maintaining consistent tool life. The design therefore translates directly into fewer rejects and less rework, supporting efficient production flow. Fast, secure mounting and straightforward insert handling Mounting is accomplished via an M8 screw-in thread with a thread engagement height of 18 mm, ensuring a secure connection to the toolholder; the clamping screw specification is M2x4.2 and requires a T6 Torx key. The cutter is configured for ADMX 0702 indexable inserts from Pramet, allowing quick replacement without complex realignment. Indexable inserts mean that when a cutting edge wears, the insert is rotated or replaced rather than remanufacturing the whole cutter — a workflow that reduces downtime and lowers lifetime costs. Clear torque and key specifications make maintenance tasks predictable and efficient. Application focus and measurable productivity benefits With a 90° cutting angle and four teeth, this screw-in cutter is optimised for square shoulders and face machining where dimensional accuracy is critical. The cutting height of 23 mm supports adequate chip load for stable material removal in short-reach setups. By combining a compact diameter with multi-edge cutting, the tool balances material removal rate with surface integrity, enabling faster cycle times on small-diameter features. For workshops seeking dependable, repeatable results in precision turning and facing, this configuration offers a reliable compromise between accessibility and cutting performance. For tailored procurement of the Teknik Cutting Tools screw-in milling cutter VT200TM with ADMX 0702 compatibility, contact Metav Werkzeuge for expert advice and reliable supply directly from Emmerich. Technical data SKU: VT200TM Name: Screw-in milling cutter for ADMX 0702 indexable inserts Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 16 mm Total length: 41 mm Thread: M8 Thread height: 18 mm Cutting height: 23 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.041 kg Torx screw: M2x4.2 Torx key: T6 Special features Compatible with ADMX 0702 indexable inserts Designed for Pramet insert system Compact design for limited-access machining Balanced multi-edge geometry for stable cutting FAQ Which insert type fits this cutter? The cutter is configured for ADMX 0702 indexable inserts and is compatible with Pramet ADMX 0702 inserts as specified for the VT200TM. What is the mounting thread and screw specification? Mounting uses an M8 screw-in thread with 18 mm thread engagement; the clamping screw is M2x4.2 and the required Torx key is T6. What machining tasks is the cutter intended for? The 90° cutting geometry and four cutting edges make the tool suitable for square-shoulder cutting and facing in compact setups where rigidity and repeatability are required. How many cutting edges does the tool have and what is the benefit? The cutter has four cutting edges, which provide balanced material removal, lower vibration and improved surface quality for short-reach operations. What are the key dimensions that affect rigidity? Key dimensions are the 16 mm diameter, 41 mm total length and 0.041 kg mass; these combine to reduce overhang and improve stability during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact solution that pairs reliable indexable inserts with a sturdy Ø 20 mm shank and five cutting edges for consistent machining results; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Teknik Makina S761TM shaft cutter — for ADMX 0702 indexable inserts, Ø 20 mm Teknik Makina S761TM shaft cutter is designed for milling with ADMX 0702 indexable inserts, offering a compact total length and robust shank for repeatable setups in production and workshop environments. *Suitable for ADMX 0702 inserts *Ø 20 mm shank diameter *Five cutting edges for high material removal *Total length 125 mm Precise compatibility with ADMX 0702 indexable inserts for efficient production The tool is optimised for ADMX 0702 indexable inserts, giving a straightforward interface between cutter and insert that reduces set-up time and minimises downtime. Using a dedicated insert format simplifies inventory management and makes tool replacement predictable. For users migrating from different systems, the clear specification for the insert format and manufacturer compatibility ensures the machining process stays consistent and measurable. The focus is on reliable repeatability rather than experimental setups. Stable shank geometry for consistent tool life and accuracy A Ø 20 mm shank and a balanced total length of 125 mm provide dimensional stability during milling operations. The cutter’s design keeps deflection low at typical spindle speeds for indexable tooling, supporting consistent surface quality and dimensional tolerance. The 17 mm cutting length and a 90° cutting angle are suited to general facing and shoulder milling tasks, enabling controlled metal removal without unnecessary tool movement. Secure clamping and quick insert handling to lower cycle time Fast, secure clamping is achieved with a Torx M2x4.2 screw and a matching T6 key specification, enabling safe fixation of the insert and straightforward servicing at the machine. The use of a standard Torx fastening reduces the risk of incorrect torque and helps maintain insert seat integrity, which in turn extends the effective life of the indexable inserts. Fewer tool-change interruptions translate directly into higher effective machining time per shift. Practical workshop advantages and application scope Well suited to general milling operations that call for indexable-insert tooling, the cutter supports a variety of metals when matched with appropriate inserts from the specified manufacturer. The compact weight of 0.3 kg and the robust shank make it a practical choice for production lines and jobbing workshops that prioritise predictable, repeatable results. The specification encourages modular tool management and enables better planning for tool rotation and insert stock. Contact Metav Werkzeuge today to discuss application fit and secure the Teknik Makina S761TM shaft cutter for ADMX 0702 inserts; our team in Emmerich provides practical advice and fast dispatch for production-ready tooling. Technical Data SKU: S761TM Manufacturer: Teknik Makina Compatible insert: ADMX 0702 Compatible insert manufacturer: Pramet Torx screw: M2x4,2 Torx key: T6 Weight: 0.3 kg Core dimensions Shaft diameter: 20 mm Cutting length: 17 mm Diameter: 20 mm Number of cutting edges: 5 Total length: 125 mm Cutting angle: 90° Materials & features For ADMX 0702 indexable inserts Compatible with Pramet inserts Secure Torx fastening system Designed for repeatable set-ups and quick insert changes FAQ Which inserts fit this cutter? The cutter is built for ADMX 0702 indexable inserts; compatibility with Pramet inserts is specified for straightforward replacement and stock planning. What are the key dimensions to check before ordering? Important dimensions include the Ø 20 mm shank diameter, 17 mm cutting length, 125 mm total length and a 90° cutting angle to ensure correct machine and holder fit. How is the insert secured in the cutter? The insert is fastened using a Torx M2x4.2 screw; the specified drive size is T6, which helps achieve consistent clamping torque. Is the cutter balanced for higher spindle speeds? The robust shank diameter and compact total length support reduced deflection and balance appropriate for indexable-insert milling; specific balancing for high-speed applications should follow machine and spindle recommendations. Can this cutter be used for heavy stock removal? With the correct insert grade and cutting parameters, the design supports effective material removal; the five cutting edges and shank stability favour productive milling cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable clamping interface and proven indexable-insert compatibility: the cutter combines a 20 mm shank with ADMX 0702 insert support and four cutting edges for dependable production throughput. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S760TM — 20 mm shank, for ADMX 0702 indexable inserts (Teknik Makina) The Shank milling cutter S760TM is a robust 4-flute tool engineered for face and shoulder milling with ADMX 0702 indexable inserts in general machining applications High-stability 20 mm shank Compatible with ADMX 0702 inserts Four cutting edges for balanced cutting 125 mm overall length for extended reach Precision and stability for repeatable machining The tool offers a 20 mm shank and a balanced four-flute geometry that reduces vibration and improves surface finish during both roughing and light finishing passes. The combination of a solid shank diameter and a nominal 125 mm overall length provides stable clamping and repeatable tool life, which translates directly into fewer tool changes and more consistent part tolerances. For shops working to tight process windows, the cutter’s 90° cutting angle supports square shoulder operations with predictable cutting forces. Designed for productivity and simple maintenance With a dedicated insert pocket for ADMX 0702 indexable inserts and a secure M2x4.2 Torx screw (Torx key T6) the system simplifies insert changes and reduces downtime. The modular insert design allows rapid replacement without regrinding, and the cutter’s 17 mm effective cutting length delivers material engagement suitable for common face and slotting tasks. The modest weight of 0.293 kg keeps spindle load low while maintaining rigidity, making the cutter suited for both manual tool setups and CNC environments where cycle time and tool-change efficiency matter. Compatibility, application and tool-room guidance Manufactured for compatibility with Pramet-style tooling, the S760TM supports indexable insert use across a range of ferrous and non-ferrous operations when paired with the appropriate insert grade. The adapter-style pocket accepts ADMX 0702 plates, enabling the selection of carbide grades and coatings tailored to stainless steels, alloy steels or general engineering materials. For predictable results, match insert geometry and grade to the specific machining task; the cutter’s four cutting edges deliver a balanced cut pattern that helps maintain tool life and workpiece quality. For technical fit confirmation or to specify the S760TM for a particular application, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com — our advisors can confirm suitability and offer ordering support Technical data Article number: S760TM Manufacturer: Teknik Makina Article name: Shank milling cutter for ADMX 0702 indexable inserts Compatible insert type: ADMX 0702 Core dimensions Shank diameter: 20 mm Cutting length (effective): 17 mm Cutting diameter: 20 mm Number of cutting edges: 4 Overall length: 125 mm Weight: 0.293 kg Cutting angle: 90° Designs / Special features Torx screw: M2x4,2 Torx key: T6 Compatible with Pramet inserts 4-flute geometry for balanced cutting FAQ Which indexable inserts fit the cutter? The S760TM shank milling cutter from Teknik Makina is designed for ADMX 0702 indexable inserts and is compatible with Pramet-manufactured plates of that designation. Is the shank size suitable for standard toolholders? Yes, the S760TM features a 20 mm shank that fits holders and collets specified for 20 mm tooling, providing secure clamping for stable machining. What fastening hardware is required for insert changes? Insert clamping uses an M2x4.2 Torx screw secured with a T6 Torx key; the S760TM design facilitates rapid and repeatable insert replacement. For which operations is this cutter best suited? The S760TM is intended for face and shoulder milling where a 90° cutting angle and four cutting edges provide efficient material removal and a good surface finish. How heavy is the tool and does weight affect spindle load? The S760TM weighs 0.293 kg, which is light enough to keep spindle load low while maintaining the rigidity needed for industrial machining cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of insert compatibility and rigid toolholding: the S759TM delivers compatibility with ADMX 0702 indexable inserts, a 16 mm shank and three cutting edges for stable, repeatable milling — order directly via Metav Werkzeuge or consult their specialists for tailored technical guidance. Shaft milling cutter S759TM by Teknik Makina — 16 mm shank, for ADMX 0702 indexable inserts The Shaft milling cutter S759TM is an insert-style milling tool designed for operations that specify ADMX 0702 indexable inserts; it combines a compact 16 mm shank with a 90° cutting geometry for accurate shoulder and face milling. 16 mm shank for secure toolholding Compatible with ADMX 0702 indexable inserts Three cutting edges for smooth material removal Total length 160 mm, weight 0.205 kg Consistent chip control and repeatable cutting performance The insert milling cutter is built for predictable, efficient material removal. With a 16 mm shank and three cutting edges, the design reduces chatter and improves surface quality during peripheral and face milling. The 18 mm cutting length offers a practical balance between reach and rigidity, while the 90° cutting angle provides square shoulders and clear reference faces. Fast, positive clamping of the inserts is achieved with the Torx M2x4.2 screw and T6 key, allowing quick replacement of indexable inserts and consistent position repeatability — a crucial factor when multiple identical components are required on a production run. Fewer stoppages and straightforward maintenance Maintenance is simplified by the insert system and standardised fastenings. Being compatible with ADMX 0702 inserts from Pramet ensures access to a broad range of grades and geometries without altering the holder, which reduces inventory complexity and downtime. The relatively low mass of 0.205 kg and the 160 mm total length support stable spindle dynamics in many common setups. This combination minimises setup time and helps maintain throughput in busy workshops while offering a serviceable solution that aligns with established tooling systems. Clear selection criteria for workshop planners When specifying an insert holder, the primary considerations are insert type, shank diameter and cutting geometry. This milling head accepts ADMX 0702 inserts and features a 16 mm shank for secure clamping in standard toolholders. The presence of three cutting edges means each insert can be indexed several times before replacement, which is economical where repeatability is required. For tasks that require well-defined shoulders or face finishes, the 90° cutting angle offers a reliable geometric result. For further clarification on suitability in specific machining scenarios, Metav Werkzeuge’s product documentation and consultants can advise on insert grades and machine parameters. Choose the Teknik Cutting Tools S759TM for dependable insert milling performance and contact Metav Werkzeuge in Emmerich for personalised advice and prompt supply options Technical data Article number: S759TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for ADMX 0702 indexable inserts Weight: 0.205 kg Facts Shank diameter: 16 mm Cutting length (shank): 18 mm Cutting edges: 3 Total length: 160 mm Cutting angle: 90° Special features Compatible inserts: ADMX 0702 Compatible insert manufacturer: Pramet Torx screw: M2x4.2 Torx key size: T6 FAQ Which inserts fit this milling cutter? The holder is specified for ADMX 0702 indexable inserts; compatible grades and geometries from Pramet can be used with the S759TM. What is the shank diameter and why does it matter? A 16 mm shank provides secure toolholding and rigidity, reducing vibration and improving repeatability during milling operations with the S759TM. How many cutting edges are available per insert and how are they secured? Each position uses an insert with three cutting edges; the inserts are secured with a Torx M2x4.2 screw and tightened using a T6 key for reliable clamping and repeatable indexing. For what types of machining is this tool intended? The tool is intended for indexable-insert milling operations where ADMX 0702 inserts are specified, offering reliable shoulder and face milling geometry thanks to its 90° cutting angle. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Precision milling with compact dimensions and reliable insert clamping: the S751TM combines compatibility with Pramet ADMX 0702 indexable inserts and a 90° cutting angle on a 10 mm shank, delivering consistent shoulder results in small toolholder setups. Order the S751TM directly via Metav Werkzeuge or consult our specialists for application advice. S751TM — Shank milling cutter for ADMX 0702 indexable inserts, 10 mm shank, 90° The S751TM is a shank milling cutter designed for use with ADMX 0702 indexable inserts, engineered for accurate shoulder and face milling in compact machining centres and workshop setups. Compact 10 mm shank diameter 90° cutting angle for square shoulders Compatible with Pramet ADMX 0702 inserts Torx clamp M2x4.2 with T6 key Precise shoulder milling with compact geometry The shank design and 90° cutting angle deliver a consistent square shoulder finish while keeping tool overhang minimal. With a 10 mm shank diameter and 2 cutting edges, the tool offers stable engagement during interrupted cuts and contouring, which supports predictable dimensional results on workpieces. Designed for indexable-insert operation, the cutter body accepts ADMX 0702 inserts to separate cutting-edge wear from the holder, simplifying routine maintenance and repeatability across series production runs. Secure clamping and low-maintenance exchange Fast and reliable insert retention is provided by the Torx M2x4.2 clamp screw, tightened with a T6 key, which ensures reproducible clamping torque and straightforward insert changes. The lightweight construction (approx. 0.062 kg) and compact overall length 80 mm reduce spindle load and contribute to longer tool life under correct operating conditions. Built with high-quality metalworking in mind, the cutter body is intended to reduce downtime through quick insert swaps and predictable reconditioning cycles. Easy integration into production tooling and small setups The compact shank and reduced overall length make the cutter suitable for tight fixturing and smaller toolholders common in precision workshops. With a 16 mm cutting length and a balanced design for indexable inserts, the tool aligns with standard workshop workflows and allows for economical edge management: worn inserts are replaced without replacing the holder body. Documentation-friendly identifiers and simple geometry support rapid tool data entry into CAM systems for repeatable machining sequences. For application-specific advice on Teknik Makina cutting tools, contact Metav Werkzeuge in Emmerich for an expert consultation or request detailed compatibility information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S751TM Manufacturer: Teknik Makina Product type: Shank milling cutter for indexable inserts For inserts: ADMX 0702 Fits inserts by: Pramet Torque screw: M2x4.2 (Torx T6) Facts Shank diameter: 10 mm Cutting length: 16 mm Overall length: 80 mm Weight: 0.062 kg Number of cutting edges: 2 Cutting angle: 90° Special features Compatible inserts: ADMX 0702 Intended insert manufacturer: Pramet Torx screw M2x4.2, key T6 90° shoulder geometry High-quality metal construction; long service life FAQ Which inserts are compatible with this cutter? The cutter is specified for ADMX 0702 indexable inserts and is compatible with inserts produced by Pramet for that designation. What torque system secures the inserts? Inserts are secured with a Torx M2x4.2 clamp screw; a T6 key is used for tightening and replacement operations. Is the shank suitable for small toolholders? The 10 mm shank diameter and 80 mm overall length make the cutter suitable for compact toolholders and tight setups where reduced overhang is required. How many cutting edges does the cutter have and what does that mean for feeds? The cutter carries two cutting edges; this geometry supports stable cutting at moderate feed rates and helps balance material removal and surface finish for shoulder operations. Can worn inserts be replaced quickly to minimise downtime? Yes, the indexable-insert system separates cutting edges from the holder, allowing rapid insert changes to reduce machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com