The combination of internal cooling, a secure clamping geometry and precise ISO designation delivers dependable turning performance with consistent chip control; order the Clamping Holder directly from Metav Werkzeuge or request technical advice from our specialists if required.

Clamping Holder SVJB for VBMT Indexable Inserts — Teknik Makina

The Clamping Holder SVJB for VBMT Indexable Inserts is a right‑hand, flat‑style tool designed for precise external turning with internal coolant and compatibility with VBMT 1103 inserts.

• Clamping Holder SVJBR 1616 ISO designation
• Internal cooling for consistent chip evacuation
• For VBMT 1103 indexable inserts
• Right‑hand cutting, 93° cutting angle
• Torx screw M2.5x6.5 with T8 key compatibility

Precision and reliable clamping for repeatable turning

Engineered to secure VBMT‑type inserts with a defined clamping face, this holder gives a stable seat that reduces micro‑movement under load. The SVJBR 1616 ISO designation identifies the holder geometry and ensures repeatable positioning of the insert, which translates to consistent surface finish and dimensional repeatability on serial parts. As a consequence, machinists benefit from fewer re‑settings and improved process stability.

Internal cooling that improves tool life and chip flow

Equipped with internal cooling, the holder directs coolant close to the cutting edge to improve lubrication and evacuate chips more effectively. This internal coolant feed reduces thermal load on the insert and can prolong tool life when turning demanding materials. For operations where chip control and cooling are critical, the integrated coolant path delivers a measurable advantage over external‑only coolant arrangements.

Clear compatibility with VBMT 1103 inserts for flexible setups

Designed for VBMT 1103 grade indexable inserts, the SVJB configuration supports common insert geometries used in roughing and finishing. The flat‑style seat suits shops that standardise on this insert shape, simplifying tool inventory and changeovers. Where interchangeability and quick reconditioning of cutting edges matter, this holder supports established insert grades without the need for adapter parts.

Practical assembly and workshop ergonomics

Fast installation is supported by the supplied Torx screw specification and key: the holder accepts a Torx screw M2.5x6.5 secured with a T8 Torx key, allowing controlled torque and straightforward clamp replacement. The right‑hand cutting orientation and 93° cutting angle suit conventional turning operations, while the proven clamp geometry eases insert seating and reduces the risk of misalignment during re‑assembly.

Strongly recommended: choose Teknik Makina’s SVJB Clamping Holder for reliable turning performance and purchase through Metav Werkzeuge for dependable supply and expert consultation — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271

Product Details

• Article number: AP549TM
• Brand: Teknik Makina
• Description: SVJB for VBMT Indexable Inserts (SVJBR 1616)

Facts

• Clamping width: 16 mm
• Holder height: 16 mm
• Cutting head width: 16 mm
• Cutting height: 35 mm
• Overall height: 16 mm
• Overall length: 100 mm
• Cutting angle: 93°
• Weight: 0.16 kg

Features

• Innenkuhlung: Internal cooling channel
• Suitable for: VBMT 1103
• Torx screw: M2,5x6,5 (Torx screw specification)
• Torx key: T8 (Torx key specification)
• ISO designation: SVJBR 1616
• Holder shank reference: H11‑F‑IK
• Cutting direction: Right

FAQ

How does the internal cooling affect machining with the Clamping Holder SVJB?
The Clamping Holder SVJB for VBMT Indexable Inserts from Teknik Makina uses internal cooling to direct fluid to the cutting zone, which improves chip evacuation and reduces heat at the insert, helping to extend insert life and maintain cutting stability.

Which inserts fit this holder?
This holder is designed for VBMT 1103 indexable inserts; the SVJB geometry and ISO designation SVJBR 1616 ensure correct seating and repeatable positioning of these inserts in regular turning applications.

What torque system is recommended for securing the insert?
The holder uses a Torx screw M2.5x6.5 and is tightened with a T8 Torx key, enabling controlled fastening to maintain clamp integrity without over‑stress.

Is the Clamping Holder suitable for right‑hand turning only?
Yes, the AP549TM configuration is specified for right‑hand cutting; its geometry and 93° cutting angle are optimised for conventional right‑hand turning operations.

Can the holder be used in automated tool changers or is it for manual setups?
With its standard ISO designation and compact dimensions (SVJBR 1616), the holder integrates into standard tool posts and modular assemblies commonly used in both manual and automated turning centres.

Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com