Klemmhalter 93° SVJBL 2525 M16-IK for VBMT 1604 Indexable Inserts Innenkühlung linksschneidend - Teknik Makina

Take advantage of a robust turning solution that combines precise clamping, through‑coolant capability and a compact 25 x 25 mm shank for reliable chip control and repeatable setup; order directly via Metav Werkzeuge or contact the consultants for tailored advice.

SVJBL 2525 Clamping Toolholder – Left‑hand, internal coolant (Teknik Makina)

The SVJBL 2525 clamping toolholder is a left‑hand turning holder for VBMT 1604 indexable inserts, engineered for secure clamping and efficient through‑coolant machining in conventional CNC turning applications

• SVJBL 2525 design for VBMT 1604 inserts
• Left‑hand orientation for opposite cuts
• Integrated internal coolant for chip evacuation
• 25 x 25 mm shank, 150 mm overall length

Stable clamping for consistent turning quality

The holder is built with a square 25 x 25 mm shank and an ISO designation of SVJBL 2525, providing a compact, rigid connection between toolpost and cutting edge. This geometry reduces vibration and contributes to consistent surface finish and dimensional repeatability. For operations that demand predictable tool behaviour, the combination of a short effective overhang and a solid clamping interface translates into reduced rework and fewer interrupted production cycles, particularly when paired with VBMT 1604 inserts.

Improved cooling and chip management for longer insert life

Internal coolant channels deliver cutting fluid directly to the cutting zone, supporting chip evacuation and thermal control at the insert edge. The through‑coolant capability helps maintain cutting edge integrity and can extend insert life by reducing built‑up edge formation. With a cutting angle of 93° and a cutting height of 40 mm, the holder promotes stable cutting conditions; this reduces the risk of premature tool wear and supports higher feed rates where process windows allow.

Secure fastening and easy maintenance

Assembly and service are straightforward: the toolholder uses a TA034 clamp plate together with an M3.5x11 Torx screw (Torx T15) for positive insert retention, while the back‑end mounting is compatible with the M16‑IK toolpost interface. These standardised fastenings simplify replacement and maintenance routines on the shop floor, minimising downtime. The holder’s mass (approx. 0.683 kg) and its overall length of 150 mm are balanced to facilitate quick tool changes without compromising rigidity.

Application scope and machining advantages

Designed primarily for turning operations that employ VBMT indexable inserts, the holder’s left‑hand orientation is suited for facing and external turning where opposite cutting direction is required. The compact head width of 32 mm and shank profile make it an appropriate choice for both general workshop turning and production environments where space and tool clearance are factors. Compatibility with standard insert geometry and through‑coolant lines ensures a versatile fit into existing CNC turning cells.

Contact Metav Werkzeuge for a specification review of the SVJBL 2525 clamping toolholder with internal coolant and to confirm suitability for the machine and insert grade in use; our Emmerich team provides practical, experienced guidance

Technical Details

• Article number: AP556TM
• Manufacturer: Teknik Makina
• ISO designation: SVJBL 2525
• Suitable for inserts: VBMT 1604
• Mounting shank: M16‑IK
• Torx screw: M3,5x11
• Torx key size: T15
• U‑plate: TA034
• Through‑coolant: internal
• Cutting direction: left

Dimensions & Weights

• Overall length: 150 mm
• Shank width: 25 mm
• Shank height: 25 mm
• Head (cutting) width: 32 mm
• Cutting height: 40 mm
• Cutting angle: 93°
• Weight: 0.683 kg

Components & Special features

• Clamp plate: TA034
• Fastening: Torx M3.5x11 (T15)
• Mounting interface: M16‑IK
• Orientation: left‑hand holder
• Compatible inserts: VBMT 1604

FAQ

Which insert format fits this holder?
The holder is designed for VBMT 1604 indexable inserts and secures them with the TA034 clamp plate and M3.5x11 Torx screw.

Is the toolholder suitable for through‑coolant applications?
Yes, the SVJBL 2525 toolholder features internal coolant channels to deliver fluid to the cutting zone.

What are the shank dimensions and overall length?
Shank size is 25 x 25 mm and the overall length is 150 mm, giving a compact, rigid mounting profile.

Can it be mounted on standard toolposts?
Mounting uses an M16‑IK interface; compatibility with the toolpost should be verified against this specification.

What is the cutting direction and typical use case?
The holder is left‑hand oriented, suitable for facing and external turning where opposite cutting direction is required; product SKU AP556TM from Teknik Makina is aimed at general turning operations.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com