12mm SDJC Turning Holder for DCMT 0702 Indexable Inserts, internal coolant, right-hand - Teknik Makina

Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina

Turning Holder SDJC for DCMT Indexable Inserts is a right-hand clamping tool designed for secure turning with DCMT 0702 indexable inserts, offering internal coolant and a compact form for confined toolposts.

• SDJC for DCMT indexable inserts
• Internal Coolant for improved chip control
• Right-hand tool with 93° cutting angle
• Compact 125 mm overall length for tight setups
• Quick clamping via Torx T8 and M2.5x5.5 fastening

Precise Material Removal with Reliable Geometry

Engineered for consistent chip formation, this Turning Holder accepts DCMT 0702 inserts and uses a 93° cutting angle that stabilises the cutting edge during interrupted cuts. The result is improved surface finish and predictable tool life. By matching holder geometry to the insert type, users benefit from repeatable performance and reduced setup adjustments, which is particularly valuable in batch production and tight-tolerance turning operations.

Internal Coolant for Cooler Cutting Zones

The integrated Internal Coolant channel directs cutting fluid close to the insert, lowering temperatures at the cutting zone and enhancing chip evacuation. This targeted cooling helps maintain cutting-edge integrity and can reduce thermal wear on both insert and holder. For shops machining stainless steels or high-temperature alloys, the coolant provision supports longer insert life and fewer unplanned tool changes.

Compact Footprint for Small Toolholders and Fixtures

With an Overall Length of 125 mm and a shank dimension of 12 × 12 mm, the holder fits compact toolposts and reduced-clearance setups without sacrificing rigidity. The 16 mm cutting-head width and 27 mm cutting height provide a stable platform for the insert while keeping the assembly compact. This design is advantageous in multi-station turrets and live-tool applications where space is at a premium.

Fast, Secure Clamping and Easy Maintenance

Assembly uses a Torx T8 key and M2.5x5.5 screw for the insert clamp, enabling rapid insert changes and reliable fixation. The ISO designation SDJCR 1212 indicates standardised mounting that simplifies tool inventory and replacement. Quick, tool-free changeovers reduce downtime and keep machines productive, especially in high-mix, low-volume environments.

Who benefits from this holder

This holder is aimed at professional machinists and production workshops that require a compact, coolant-fed solution for turning with DCMT inserts. It is especially suited for those working on small to medium turned components in steels and non-ferrous alloys who prioritise repeatability and low setup times. If process optimisation or insert selection is needed, METAV Werkzeuge offers expert consultation and technical support.

For tailored advice or to order Teknik Makina’s Turning Holder SDJC for DCMT Indexable Inserts, contact METAV Werkzeuge for competent consultation via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 — expert support is available to ensure the tool meets your machining requirements.

Technical Specifications

• Bezeichnung: Turning Holder (Klemmhalter)
• Marke: Teknik Makina
• SKU: AP560TM
• Type Designation: SDJCR 1212
• Compatible Inserts: DCMT 0702
• Overall Length: 125 mm
• Shank Width: 12 mm
• Shank Height: 12 mm
• Cutting Head Width: 16 mm
• Cutting Height: 27 mm
• Cutting Direction: Right
• Cutting Angle: 93°
• Internal Coolant: Yes
• Torx Key: T8
• Torx Screw: M2.5x5.5
• Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com
• Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com

FAQ

What inserts fit the Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina?
The Turning Holder SDJC for DCMT Indexable Inserts from Teknik Makina is designed to accept DCMT 0702 indexable inserts, ensuring correct seating and reliable cutting performance when combined with the specified insert geometry.

Does the Teknik Makina Turning Holder offer coolant feed?
Yes, the Teknik Makina Turning Holder SDJC for DCMT Indexable Inserts features internal coolant supply, which delivers cutting fluid directly to the cutting zone to aid chip evacuation and reduce thermal stress.

How is the insert secured on the Turning Holder from Teknik Makina?
Insert clamping for the Teknik Makina Turning Holder SDJC for DCMT Indexable Inserts uses a Torx T8 key and an M2.5x5.5 screw, allowing secure fixation and straightforward insert replacement.

Is this holder suitable for confined toolposts?
The compact 125 mm overall length and 12 × 12 mm shank of the Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina make it well suited for tight fixtures and small turrets where space is limited.

Need help choosing the right configuration for your application?
If you are unsure whether the Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina meets your requirements, METAV Werkzeuge provides comprehensive advice — contact eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271.