The combination of Klemmhalter stability, Internal Cooling and precise SDJCR 1212 clamping delivers reliable turning performance and low downtime. Use the holder for DCMT 0702 Indexable Inserts where a 93° Cutting Angle and right‑hand Cutting Direction are required — order directly from Metav Werkzeuge or contact our advisors for specification support.

Klemmhalter — SDJC for DCMT Indexable Inserts

The Klemmhalter SDJC is a right‑hand Clamping Holder engineered for DCMT 0702 indexable inserts, providing sturdy fixation and optimised chip evacuation for demanding turning operations.

• SDJCR 1212 ISO designation ensures repeatable fit
• Integrated Internal Cooling for efficient chip control
• Compatible with DCMT 0702 Indexable Inserts
• Right‑hand Cutting Direction and 93° Cutting Angle
• Torx Schraube M2.5x5.5 with Torx Schlüssel T8 for secure clamping

Robust Design for Accurate Turning and Durability

The Holder is built around a compact, flat Design that prioritises Rigidity and repeatability. The SDJCR 1212 designation indicates an ISO‑compatible interface that reduces play between Holder and Insert, so each cut remains predictable. With a modest Overall Length and a balanced Profile, the component minimises vibration and supports consistent Surface Finish. This results in longer Insert life and fewer interruptions during batch production.

Internal Cooling Enhances Performance and Tool Life

An integrated Internal Cooling channel directs cutting fluid close to the cutting edge, promoting better cooling and Chip Breakage. For users less familiar with the concept: Internal Cooling supplies coolant through the Holder to the Insert seat, reducing Thermal Load and improving lubrication at the cutting zone. The net effect is improved machining stability and extended service intervals for both Inserts and the Holder.

Precise Compatibility and Easy Setup for Workshops

Compatibility with DCMT 0702 Indexable Inserts is ensured, and the Holder accepts the clamping geometry described by the ISO designation. The Cutting Height of 27 mm and the 93° Cutting Angle are matched to standard Insert geometries for predictable tool paths. Clamping is performed with the supplied Torx Schraube M2.5x5.5, tightened using a Torx Schlüssel T8, ensuring consistent torque and safe retention. The Holder can be mounted on a matching shank such as K07‑F‑IC, giving clear integration into existing tool assemblies.

Practical Handling and Application Recommendations

Installation and routine checks are straightforward: inspect the Insert seat for cleanliness, ensure the Torx Schraube is free of chip damage and use the specified Torx Schlüssel for proper torque. The Holder’s compact dimensions — including a 12 mm Width and 12 mm Height for the clamping head — make it suitable where space is limited but rigidity remains essential. The right‑hand Cutting Direction and the robust clamping design suit general turning tasks from semi‑finishing to light profiling in a variety of ferrous and non‑ferrous materials.

Choose Teknik Makina quality: secure the SDJC clamping holder from Metav Werkzeuge for precise, low‑downtime turning — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for machining advice and delivery details

Product Attributes

• SKU: AP569TM
• Brand: Teknik Makina
• ISO Designation: SDJCR 1212
• Product Name (EN): SDJC for DCMT Indexable Inserts

Facts

• Width: 12 mm
• Height: 12 mm
• Cutting Head Width: 12 mm
• Cutting Height: 27 mm
• Overall Length: 125 mm
• Cutting Angle: 93°
• Weight: 0.18 kg
• Cutting Direction: Right

Features

• Compatibility: DCMT 0702 (Indexable Insert type)
• Internal Cooling: Yes (through‑holder coolant supply)
• Torx Schraube: M2.5x5.5 (metric screw)
• Torx Schlüssel: T8 (key for screw tightening)
• Clamping Rod Designation: K07‑F‑IC
• Bezeichnung (EN): SDJC for DCMT Indexable Inserts

FAQ

What Inserts fit this clamping holder?
The holder is designed for DCMT 0702 Indexable Inserts; the SDJCR 1212 Interface ensures precise seating and compatibility with standard DCMT geometries.

Does the holder provide coolant to the cutting edge?
Yes. The Internal Cooling channel supplies coolant close to the cutting zone, improving chip control and reducing Thermal Load on the Insert.

Which screw and key are required for clamping?
Clamping uses a Torx Schraube M2.5x5.5, tightened with a Torx Schlüssel T8 to achieve secure and repeatable clamping force.

Is this holder suitable for right‑hand turning only?
The unit specified here supports a Right Cutting Direction and is intended for right‑hand turning applications where a 93° Cutting Angle is appropriate.

Who manufactures this clamping holder and where can I get it?
The holder is from Teknik Makina and is available through Metav Werkzeuge; contact info@metav-werkzeuge.com for availability and delivery.

Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com