Klemmhalter 93° SDJCL 1212 K07-F-IC for DCMT 0702 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina

Take advantage of a compact, flat toolholder that combines internal coolant, strict ISO compatibility and secure clamping for reliable turning operations; ideal for shops that require predictable tool life and repeatable set-ups. Order the item via Metav Werkzeuge or consult their specialists for application advice.

Klemmhalter SDJC for DCMT Indexable Inserts — Flat turning toolholder with internal coolant, left-hand cut, by Teknik Makina

The Klemmhalter SDJC for DCMT Indexable Inserts is a flat, left-hand toolholder designed for turning with DCMT 0702 indexable inserts and with an integrated internal coolant channel for improved chip control.

• Flat profile for confined turning spaces
• Internal coolant for controlled chip flow
• ISO SDJCL 1212 designation
• Compatible with DCMT 0702 inserts

Consistent seating and repeatability for stable machining

The SDJC toolholder has been engineered to deliver firm insert clamping and consistent seating, which reduces vibration and improves surface finish. The ISO designation SDJCL 1212 denotes the standardised geometry that ensures predictable positioning of DCMT 0702 inserts; this standardisation simplifies tool changes and shortens set-up times. For production environments this translates into fewer scrap parts and steadier cycle times, as tool repeatability directly affects dimensional consistency.

Internal coolant for improved cutting performance and tool life

An integrated internal coolant channel provides directed coolant to the cutting edge, assisting chip evacuation and cooling the cutting zone more effectively than external cooling alone. For tougher materials or longer runs, this results in reduced thermal loading on the insert and a lower risk of built‑up edge, extending insert life and maintaining surface quality. In practical terms, improved coolant delivery often reduces frequency of insert changes and supports longer uninterrupted machining cycles.

Compact, flat design to reach confined workspaces

The flat, space-saving profile makes this holder suitable for operations where clearance is limited. With a cross section of 12 x 12 mm and an overall length of 125 mm, the holder provides access while maintaining rigidity. The compact dimensions help on lathes and multi‑spindle machines where tool interference is a concern, enabling productive tool layouts without compromising support for the insert. A lower profile therefore supports flexible machine setup and easier access for maintenance.

Secure fastening and service-friendly components to cut downtime

Clamping is achieved with a Torx screw M2.5x5.5, secured via a T8 key, which simplifies repeatable tightening and replacement. The holder’s design yields a cutting height of 27 mm and a cutting angle of 93°, values that contribute to reliable cutting geometry and clearances. At a measured weight of 0.17 kg, the unit combines stiffness with low mass to minimise load on tool turrets. For maintenance, the standardised screw and compact construction permit quick insert swaps and straightforward torque application, reducing machine downtime and simplifying routine servicing. For technical queries or application matching, Metav Werkzeuge offers product guidance and specifications.

Contact Metav Werkzeuge for tailored application advice or to arrange delivery of the Teknik Makina SDJC toolholder with internal coolant — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930

Technical data

• SKU: AP573TM
• Article name: Klemmhalter SDJC for DCMT indexable inserts
• Manufacturer: Teknik Makina

Numbers / Core technical data

• Width: 12 mm
• Height: 12 mm
• Cutting head width: 12 mm
• Overall length: 125 mm
• Cutting height: 27 mm
• Cutting angle: 93°
• Weight: 0.17 kg
• Screw: M2.5x5.5 (Torx)
• Torx key: T8
• Cutting direction: left

Designs / special features

• Internal coolant
• For DCMT 0702 inserts
• ISO designation: SDJCL 1212
• Flat design (flache Ausführung)
• Shank designation: K07-F-IC

FAQ

Is this holder compatible with DCMT 0702 inserts?

Yes. The SDJC holder is designed specifically for DCMT 0702 indexable inserts and fits the standard insert geometry for this size.

Can the holder be used for right-hand turning operations?

No. This holder has a left-hand cutting direction; for right-hand turning a corresponding right-hand variant is required.

Does the holder provide through-tool coolant?

Yes. The unit includes an internal coolant channel to direct coolant towards the cutting edge and improve chip evacuation.

What fastener and key are used to secure the insert?

The clamping screw is M2.5x5.5 (Torx) and the required key size is T8 for insert clamping and replacement.

Which machines and applications suit this holder?

The flat profile and compact 12 x 12 mm cross section make it suitable for lathes and machines with limited clearance, especially in turning operations that use DCMT 0702 inserts for general turning and finishing tasks.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com