Secure clamping with precision vises
Vises provide rigid, reliable clamping for manual and machine work, enabling precise filing, sawing, threading and drilling by holding workpieces absolutely still; they serve workshops and production halls as essential fixtures for assembly and machining, from bench-mounted parallel vises to machine vises for metalworking. By using hardened steel or vibration-damping cast iron constructions and exchangeable protective jaws of aluminium, polyurethane, rubber or copper, vises protect delicate surfaces while delivering high holding forces that enhance both accuracy and operator safety. As a core tool for metal, plastic and woodworking, they support repeatable setups, improve process stability and reduce rework through consistently secure fixation.
0-100 mm Bench Vice With 360° Swivel Base, 1,800 kgf Clamp Force - Vertex
The combination of a 1800 kgf clamping force and a 360° swivelling base ensures stable, adaptable clamping for repetitive workshop tasks; paired with a compact 0–100 mm jaw opening, this vice supports reliable throughput and precise positioning. Order directly via Metav Werkzeuge or consult our advisers for specification assistance. BVV-4 Workshop Vice – 1800 kgf clamping force, 0–100 mm jaw opening (Vertex) The BVV-4 workshop vice with a 360° swivelling base secures workpieces for machining, assembly and measurement tasks, offering flexible positioning and consistent clamping in general workshop and light industrial environments. 360° swivelling base for flexible alignment 1800 kgf clamping force for secure holding 0–100 mm jaw opening for varied workpieces Robust 7 kg construction for daily use Secure clamping for repeatable accuracy A high clamping force is essential when consistency matters. The 1800 kgf rating of this clamping device provides secure fixation for a wide range of operations, reducing the risk of slippage during cutting, filing or assembly. By combining strong bite with a controlled jaw opening of 0–100 mm, the vice enables accurate workpiece positioning and improved process stability. For workshops seeking measurable reliability, this results in fewer reworks and a steadier production flow. Flexible positioning that speeds workflows Built around a 360° swivelling base, this clamping solution allows rapid alignment of the workpiece without repeated unclamping and reclamping. The swivel function shortens set-up times and supports multi-angle operations on the same fixture, which contributes to higher throughput and smoother job changeovers. The compact footprint and the vice’s capacity for fine positional adjustment make it well suited to benches where workflow efficiency and ergonomic access are priorities. Durable design for everyday workshop demands Designed for frequent use, the vice features a robust construction and a manageable mass of 7 kg, giving it stability without excessive bulk. Its build quality resists the knocks and stresses of daily handling, helping to sustain precision over time. Where regular clamping is part of production routines, a durable vice reduces downtime for repairs and replacement, supporting predictable maintenance cycles in the workshop. Practical fit for machining and inspection tasks The vice’s combination of secure holding, defined opening range and swivel capability makes it appropriate for both machining and measuring setups. When paired with common metrology practices, the stable clamping performance supports more consistent measurement results. The device integrates neatly into benches used for assembly, finishing and inspection work, offering a balance between rigidity and operational flexibility. For tailored advice on integrating the Vertex BVV-4 into existing workflows, contact Metav Werkzeuge—our specialists in precision tools are available via info@metav-werkzeuge.com, by phone on +49 2822 7131930 or WhatsApp at +49 170 2837271 to discuss specifications and compatibility Technical data Article number: BVV-4 GTIN: 4061905089985 SKU: BVV-4 Facts Dimensions: 178 x 310 x 148 mm Weight: 7 kg Clamping force: 1800 kgf Jaw opening: 0–100 mm eClass: 21020601 ETIM: EC002173 Special features 360° swivelling base Designed for workshop and light industrial use Compact footprint for bench mounting Manufacturer: Vertex FAQ What clamping force does the vice provide? The vice offers a clamping force of 1800 kgf, delivering stable holding for machining and assembly operations with the Vertex BVV-4 workshop vice. What is the maximum jaw opening? The jaw opening is 0–100 mm, allowing the vice to handle a wide range of workpiece sizes suitable for general workshop tasks. Can the vice be rotated for multi-angle work? Yes, the integrated 360° swivelling base permits flexible alignment and rapid repositioning without repeated unclamping. How heavy is the vice and is it suitable for bench mounting? Weighing 7 kg, the unit provides a stable yet manageable mass and is designed for secure bench mounting in workshop environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-100 mm Grinding Vice With Low-Pull Adjustment System, 73x185x68mm - Vertex
Take advantage of precise clamping, a wide 0–100 mm opening and a compact footprint to streamline grinding operations; order the vice directly via Metav Werkzeuge or consult the Metav team for application advice. VBST-30 grinding vice with low-draw adjustment — Vertex The VBST-30 is a compact grinding vice with a low-draw adjustment system designed for secure clamping in precision grinding and toolroom applications. High-precision repeatability 0.005 mm Adjustable opening 0–100 mm Low-draw adjustment system Compact footprint 73x185x68 mm Maximise machining accuracy with repeatable clamping The vice delivers consistent positioning thanks to its rated 0.005 mm accuracy, reducing rework and variance between batches. This level of precision supports fine grinding and finishing tasks where tight tolerances matter, ensuring fewer inspection rejects and smoother downstream processes. The specification for repeatability enables predictable results across repeated setups, which helps to shorten cycle times and maintain quality in serial production. Faster setups through practical adjustment and range A wide opening of 0–100 mm paired with the low-draw adjustment system reduces clamping time and simplifies part loading. The mechanism is engineered to keep the workpiece firmly located during abrasive machining while allowing quick repositioning for successive operations. The compact footprint and manageable mass of 4.5 kg make the unit straightforward to integrate into existing magnetic or fixed grinding fixtures, improving workshop throughput without requiring major machine adaptations. Stable performance in grinding environments Designed for the demands of abrasive machining, the vice offers a stable workholding solution that supports finish consistency and operator confidence. The geometry and adjustment concept focus on maintaining clamp force and alignment under cutting and dressing loads, which contributes to fewer interruptions for repositioning. Its dimensions of 73 x 185 x 68 mm allow close mounting to the machine table, reducing overhang and enhancing stiffness for finer surface finishes. For workshop-grade precision rely on the Vertex VBST-30 — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply directly from our European quality filter (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: VBST-30 GTIN: 4061905083242 Manufacturer: Vertex Facts Opening range: 0–100 mm Accuracy: 0.005 mm Dimensions: 73 x 185 x 68 mm Weight: 4.5 kg ECLASS: 21020601 ETIM: EC002173 Special features Low-draw adjustment system Compact grinding vice for machine integration Suited to precision grinding and toolroom applications FAQ How precise is the clamping of this vice? The vice offers an accuracy of 0.005 mm, providing the repeatability required for precision grinding with the Vertex VBST-30. What workpiece size can be accommodated? The adjustable opening covers 0–100 mm, making the unit suitable for a wide range of small to medium-sized components. Can this vice be integrated into existing grinding fixtures? Yes; the compact footprint (73 x 185 x 68 mm) and modest weight facilitate straightforward integration into standard fixtures and machine tables. Is the low-draw adjustment suitable for rapid changeovers? The low-draw adjustment system is designed to speed up clamping and repositioning, supporting efficient changeovers in serial production. What is the article number or SKU for ordering? The article number (SKU) is VBST-30, listed under Vertex for procurement and specification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-100 mm Quick-Change Bench Vise, 167x428x196mm, 13.3 kg - Vertex
Take advantage of the combination of fast clamping, a wide 0–100 mm jaw range and a stable 13.3 kg mass for reliable, repeatable workshop clamping; order directly via Metav Werkzeuge or ask our consultants for application advice. VQS-40 Quick‑Release Bench Vice — 0–100 mm jaw opening, robust stability (Vertex) The VQS-40 is a quick‑release bench vice designed for general workshop clamping and machining tasks, offering fast set‑ups and steady holding for repeatable results. Quick‑release clamping for fast setup 0–100 mm jaw opening for varied parts 13.3 kg mass for vibration dampening Compact footprint: 167×428×196 mm Reduce setup time with rapid clamping The quick‑release mechanism shortens clamping cycles, enabling faster fixture changes and improved throughput on repetitive jobs. With a 0–100 mm jaw range, the vice accommodates a broad mix of stock sizes without auxiliary jaws, helping to streamline workflow. The design focuses on practical speed: fewer adjustments mean less machine downtime and a higher rate of finished parts per shift. Hold parts securely for accurate machining A stable mass of 13.3 kg gives the vice a solid foundation, reducing micro‑movement and supporting consistent cutting results. This stability translates into better precision and improved finish quality when milling or drilling. The vice’s jaw geometry ensures reliable contact and repeatability, which is important when the same datum must be held across multiple operations. Compact design that fits busy benches The compact footprint (167×428×196 mm) saves valuable bench space while still providing effective clamping range. The vice is sized for busy workshops where layout flexibility matters; the combination of small external dimensions and a useful jaw span allows for versatile placement without sacrificing performance. This balance keeps the workbench organised and accessible while maintaining the functionality expected from a professional clamping tool. Practical technical clarity for workshop planning Key specifications are provided plainly so purchasing and production planning can proceed with confidence. The vice’s measurable properties — jaw opening, mass and overall dimensions — support decisions about fixturing, storage and compatibility with existing equipment. This transparency helps avoid guesswork and supports reliable integration into tooling setups. For tailored advice about the Vertex VQS-40 and to request technical drawings or compatibility information, contact Metav Werkzeuge in Emmerich — our specialists will assist with specifications and practical application guidance Technical data Article number: VQS-40 GTIN: 4061905083679 eClass: 21020601 ETIM: EC002173 Facts Weight: 13.3 kg Jaw opening: 0–100 mm Dimensions: 167×428×196 mm Special features Quick‑release clamping mechanism Compact bench vice design Brand: Vertex SKU: VQS-40 FAQ What is the jaw opening of the vice? The jaw opening is 0–100 mm, which allows clamping of a wide range of part sizes with few adjustments for most workshop tasks. How much does the vice weigh? The vice has a mass of 13.3 kg, providing intrinsic stability that helps to reduce vibration during machining. Are the dimensions suitable for small workbenches? Yes, the vice’s compact footprint of 167×428×196 mm makes it suitable for benches where space is limited yet robust clamping is required. Is the VQS-40 appropriate for precision drilling and milling? The VQS-40 is engineered for reliable clamping and precision, with its quick‑release system and stable mass supporting consistent machining outcomes. Who manufactures the VQS-40? The VQS-40 is produced by Vertex and supplied under the SKU VQS-40, ensuring a recognised origin and traceable specification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-100mm Pneumatic Precision Machine Vice Double-Opening 4000 kgf, Cast Iron - Vertex
Combine accuracy 0.01 mm, 4,000 kgf clamping force and a 0–100 mm opening for dependable, repeatable workholding; order the VMC-6PD directly via Metav Werkzeuge or consult our advisers for specification support. VMC-6PD Pneumatic Precision Machine Vice — 4,000 kgf Clamping, 0–100 mm Opening by Vertex VMC-6PD is a pneumatic precision machine vice designed for secure clamping in CNC and production machining environments, offering a compact footprint and double-opening function for efficient part handling. 4,000 kgf clamping force 0–100 mm versatile opening Accuracy 0.01 mm repeatability Cast-iron body for vibration damping Consistent precision that reduces rework The vice delivers industrial-grade accuracy 0.01 mm, providing stable positioning for serial machining tasks. High clamping integrity from the 4,000 kgf rating minimises workpiece movement during heavy cuts, which reduces scrap rates and downstream rework. The result is a measurable improvement in first-pass yield and reproducible results across batches, making the vice a rational choice for shops seeking predictable throughput and lower non‑productive time. Faster cycle times with pneumatic double opening Pneumatic actuation enables rapid clamp and release cycles, streamlining automated workflows. The pneumatic actuation and double-opening design shorten handling times by allowing jaws to open on either side, which is particularly advantageous in indexed or palletised systems. The 0–100 mm opening range supports a broad part size spectrum without frequent setup changes. For operations migrating from manual to automated clamping, the vice’s repeatable air-driven mechanism simplifies integration and increases net productive time on the machine. Robust construction for stable machining and long service life A cast iron body provides mass and damping, absorbing cutting forces and vibrations for improved surface finish and tool life. The vice’s substantial mass (approx. 63 kg) contributes to stable clamping on the machine table and reduces micro‑movement under load. Designed for workshop environments, the vice combines durable materials with straightforward maintenance routines, supporting continuous operation in both batch production and precision jobbing applications. Contact Metav Werkzeuge in Emmerich for project-specific advice on the Vertex VMC-6PD pneumatic precision vice, request CAD data or technical sheets via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VMC-6PD GTIN: 4061905093814 Manufacturer: Vertex Type: Pneumatic, double opening EClass: 21020601 ETIM: EC002173 Core specifications Dimensions: 160 x 682 x 148 mm Weight: 63 kg Clamping force: 4000 kgf Opening range: 0–100 mm Accuracy: 0.01 mm Materials & functions Body material: Cast iron Actuation: Pneumatic Design: Double-opening vice Intended use: Precision machine clamping FAQ What is the maximum clamping force of this vice? The VMC-6PD provides a clamping force of 4,000 kgf, giving strong, repeatable holding power for demanding machining operations. Which opening range is supported for different workpieces? The vice supports an opening range of 0–100 mm, allowing flexible clamping of small to medium-sized components on the machine table. Is the VMC-6PD suitable for automated pallet systems? Yes; the pneumatic actuation and double-opening design of the Vertex VMC-6PD make it well suited to palletised and automated loading systems where fast cycle times are required. How does the material of the vice affect machining performance? The cast iron construction of the vice improves vibration damping and stability, which helps to maintain surface finish and extend tool life during machining. What accuracy can be expected for positioning and clamping? The vice is specified with an accuracy of 0.01 mm, supporting precision requirements in serial and prototype workholding. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-100mm Precision Machine Vice Modular Hydraulic Option, 900 kgf Clamping Force, Alloy Steel - Vertex
Take advantage of the combination of modular design, 900 kgf clamping force and 0.01 mm accuracy for reliable, repeatable clamping in precision machining. Order the vice directly via Metav Werkzeuge or consult our specialists for configuration advice. VMP-4 Precision machine vice — modular, optionally hydraulic, high clamping force A VMP-4 precision machine vice engineered for demanding workshop and CNC applications, offering modular setup with an optional hydraulic actuation for faster cycle times and secure workholding. Accuracy 0.01 mm repeatability Modular design, optionally hydraulic 900 kgf clamping force Alloy steel construction, robust Consistent accuracy for demanding components The vice delivers consistent accuracy through a finely engineered clamping system that secures parts with 900 kgf of clamping force while maintaining 0.01 mm repeatability. This level of precision reduces rework and ensures stable tool paths during milling and finishing operations. The mechanical guidance and hardened contact surfaces minimise deflection under load, translating component tolerances directly into higher first-pass yields. By specifying a vice with such measured repeatability, production planning benefits from fewer inspection cycles and predictable part quality. Modular configuration that adapts to workflows A modular construction allows the vice to be configured as a purely mechanical unit or upgraded with a hydraulic module where continuous or rapid clamping is required. This flexibility shortens set-up times and supports mixed-production environments: one fixture can serve manual benches, machining centres or transfer systems depending on the fitted modules. Integration is straightforward because the unit is designed for standard fixing patterns and simple retrofitting, enabling a single clamping solution to address a wider range of workpieces and batch sizes. Durable materials and low-maintenance operation for uptime Constructed from alloy steel with surface treatments to withstand workshop conditions, the vice offers a balance of robust construction and manageable weight (approx. 9.2 kg) for easy handling during tool changes. The design minimises service points; routine maintenance consists of lubrication and inspection of wearing parts, keeping downtime low and total cost of ownership competitive. Delivered with clear dimensional data and repeatable mounting options, the vice supports predictable fixture design and long-term reliability in serial machining. Contact Metav Werkzeuge to specify the modular clamping configuration of the Vertex VMP-4 and arrange delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMP-4 GTIN: 4061905084188 ECLASS: 21020601 ETIM: EC002173 Dimensions: 75x270x65 mm Weight: 9.2 kg Material: Alloy steel Clamping force: 900 kgf Opening range: 0–100 mm Accuracy: 0.01 Type: Mechanical Brand: Vertex Facts Accuracy: 0.01 mm Clamping force: 900 kgf Opening: 0–100 mm Weight: 9.2 kg Dimensions: 75 x 270 x 65 mm Special features Modular design, optionally hydraulic Alloy steel construction Mechanical operation, compatible with retrofittable hydraulic module SKU: VMP-4 FAQ What level of accuracy can be expected from the VMP-4? The VMP-4 precision machine vice is specified with an accuracy of 0.01 mm, providing the repeatability required for tight-tolerance machining tasks. Can the vice be upgraded to hydraulic actuation? Yes, the vice features a modular design that can be supplied or retrofitted with a hydraulic module to provide faster and more uniform clamping. What materials is the vice suitable for clamping? The VMP-4 vice, built from alloy steel, is intended for secure clamping of metal workpieces commonly used in machining, supporting stable results during milling and finishing. How much clamping force does the vice provide? The unit delivers up to 900 kgf of clamping force, combining strong holding power with the precision needed for accurate machining operations. Is the VMP-4 suitable for use in CNC machining centres? Yes, the vice is designed for workshop and CNC applications and can be adapted to machining centres via standard mounting patterns or the optional hydraulic upgrade. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-102mm Precision Grinding Vise VC Series Quick-Adjust Jaw, 73x190x68mm - Vertex
Die Kombination aus robuster Bauweise, grosser 0–102 mm Spannweite und kompakten Abmessungen sorgt für verlässlichen Betrieb bei Schleif- und Präzisionsarbeiten. Order the VC30 directly via Metav Werkzeuge or ask our consultants if needed. VC30 Grinding Vice — Vertex precision vice with 0–102 mm opening A versatile VC30 grinding vice designed for secure clamping on surface and toolroom grinders, suitable for varied workshop tasks. Versatile grinding vice for workshop use Opening range 0–102 mm for varied workpieces Compact footprint 73 x 190 x 68 mm Stable 4 kg mass for improved steadiness Stable clamping for consistent grind quality The vice is engineered as a compact grinding vice that delivers steady holding power across a broad opening range. With a 0–102 mm opening, the device adapts to small and medium workpieces without frequent jaw changes, reducing setup time. Its compact footprint (73 x 190 x 68 mm) and moderate mass contribute to precision clamping by limiting vibration transfer during surface-finishing operations. This configuration supports repeatable results on conventional grinders where workpiece stability directly affects surface finish and dimensional accuracy. Flexible handling and reduced setup complexity A major benefit of the design is operational flexibility: the wide opening range enables processing of components with differing widths while maintaining an unchanged machine setup. The vice’s dimensions and weight strike a balance between portability and mass-related stability, which helps preserve wheel life and maintain consistent contact conditions. For workshops that prioritise efficient changeovers, the vice reduces time spent adapting fixtures and supports a steady workflow in mixed-production environments. Workshop longevity and straightforward use Constructed for everyday workshop use, the vice offers a straightforward mechanical concept that simplifies routine handling and inspection. The compact design minimises bench space consumption while the robust construction supports repeated clamping cycles typical in toolrooms and maintenance shops. Clear, mechanical adjustability ensures operators can check and set clamping positions quickly, which contributes to lower machine downtime and more predictable processing sequences over long production runs. Choose the Vertex VC30 for its wide 0–102 mm opening and compact stability — contact Metav Werkzeuge for ordering and technical advice: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data SKU: VC30 GTIN: 4061905085659 ECLASS: 21020601 ETIM: EC002173 Core dimensions and measures Opening range: 0–102 mm Dimensions: 73 x 190 x 68 mm Weight: 4 kg Product type and identifiers Product type: Grinding vice Model designation: VC (VC30) Image asset available: vc20-main.jpg FAQ What workpieces can be clamped in this vice? The VC30 grinding vice by Vertex is designed for small to medium-sized components within its 0–102 mm clamping range and is suitable for typical surface-grinding and finishing tasks. Is the vice suitable for repeated production use? Yes, the VC30 is dimensioned and weighted for stable, repetitive clamping cycles commonly required in toolrooms and workshops, supporting consistent grinding quality. Can the vice be used on different grinder types? The vice is intended for surface and toolroom grinding applications; compatibility with a specific machine depends on the machine table and fixturing arrangement rather than the vice itself. How does the compact size benefit workshop layout? The compact footprint of 73 x 190 x 68 mm helps save bench space while providing sufficient mass (4 kg) to reduce vibration and improve stability during finishing operations. Who manufactures the vice and what is the model designation? The vice is manufactured by Vertex and is offered under the model designation VC30, reflecting Vertex’s range of machine vices. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-103mm Machine Vice 1500 kgf Clamping Force 0.01mm Accuracy, 351x211x126mm - Vertex
Take advantage of a compact, high‑force clamping solution that combines 1500 kgf of holding power with a 0–103 mm jaw opening for versatile part sizes. The robust 20 kg construction and 0.01 mm positional accuracy support consistent machining results; order directly via Metav Werkzeuge or consult the Metav team for application advice. Vertex VA-4 Mechanical machine vice — 1500 kgf clamping force, 0–103 mm opening The Vertex VA-4 is a mechanical machine vice designed for precision clamping in workshops and machine shops, offering a compact footprint for use on milling machines and drill benches. 1500 kgf clamping force 0–103 mm adjustable jaw opening High precision with 0.01 mm accuracy Robust 20 kg body, compact 351 x 211 x 126 mm Precision clamping for consistent production results The vice delivers measurable control through its 0.01 mm positional accuracy and a finely graded jaw setting covering 0–103 mm, enabling repeatable setups for small to medium workpieces. This level of precision reduces rework and shortens inspection cycles; the clear numeric range of the opening and the defined 1500 kgf holding capacity allow planners to match clamping performance to machining forces, ensuring the fixturing is appropriate for turning, milling and drilling operations. Traceable identifiers such as GTIN: 4061905083204 support inventory and procurement processes. Stable performance and compact workshop footprint Designed with a compact profile of 351 x 211 x 126 mm and a mass of 20 kg, the device provides a low centre of gravity for reduced vibration during cutting. The solid mass contributes to consistent clamping pressure across the jaw faces, improving surface finish and tool life in routine production. The mechanical drive avoids complex electronics, simplifying maintenance and allowing rapid commissioning on conventional machine beds; the visible dimensions and mass make it straightforward to plan machine loading and workplace ergonomics. Practical integration and straightforward handling As a mechanically operated clamping tool, the vice is suitable for standard machine tables and allows quick part changes while maintaining repeat accuracy. The simple, durable mechanism supports predictable cycle times and low downtime; technical traceability is supported by the SKU and classification data for system documentation. For applications demanding robust, repeatable fixturing, the Vertex VA-4 offers a dependable balance of holding force, precision and compact design that integrates easily into existing production flows. For expert fitting recommendations and to verify compatibility with specific machines, contact Metav Werkzeuge for tailored advice on the Vertex VA-4 and its application in production environments, or request detailed technical data via info@metav-werkzeuge.com Technical Data Article number: VA-4 GTIN: 4061905083204 ETIM: EC002173 Facts Opening range: 0–103 mm Dimensions: 351 x 211 x 126 mm Weight: 20 kg Clamping force: 1500 kgf Accuracy: 0.01 mm Special features Type: Mechanical Category: Vertex eClass: 21020601 SKU: VA-4 FAQ What clamping range does the vice cover? The vice provides an adjustable jaw opening of 0–103 mm, suitable for a wide range of small to medium components. What holding force can be expected from this vice? The mechanical design achieves a rated 1500 kgf clamping force, ensuring stable fixation during typical milling and drilling tasks. Is the vice suitable for repetitive precision work? Yes; the device offers 0.01 mm positional accuracy and a stable mass of 20 kg, making it appropriate for repeatable setups in production runs. Which documentation identifiers are available for procurement and traceability? The product is listed with GTIN 4061905083204, SKU VA-4 and ETIM classification EC002173 for clear integration into purchasing and inventory systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-103mm Precision Machine Vice With Locking, 1500kgf Clamping Force, 14.2kg - Vertex
Take advantage of high clamping force and 0.01 mm precision combined with a reliable locking mechanism for consistent, safe workholding; order the vice directly via Metav Werkzeuge or consult the team for application advice. Vertex VMC-4 Precision Machine Vice with Locking — 1,500 kgf, 0–103 mm opening The Vertex VMC-4 is a precision machine vice designed for accurate and repeatable clamping in machining applications, offering a compact footprint and secure locking for demanding workholding tasks. 1,500 kgf clamping force Precision down to 0.01 mm Locking mechanism for secure hold 0–103 mm opening range Solid 14.2 kg body for stability Consistent accuracy that supports fine machining The vice delivers precision down to 0.01 mm, ensuring repeatable positioning across successive operations. This level of accuracy reduces rework and supports tight tolerances on milled or drilled components. The measured clamping force of 1,500 kgf provides the stability required to prevent micro-movement during cutting, which translates to improved surface finish and dimensional fidelity. For shops aiming to maintain throughput without compromising quality, the combination of precise guidance and robust force offers a clear operational advantage. Secure holding and flexible workpiece accommodation A locking mechanism integrated into the design guarantees secure hold during vibration-prone processes, helping to maintain cut integrity and tool life. The vice accommodates a practical workpiece range with its 0–103 mm opening, making it suitable for a variety of component sizes without frequent fixture changes. The straightforward clamping geometry simplifies setup times while the locking feature ensures that the workpiece remains stationary during heavier passes, providing operational confidence on both one-off and batch runs. Robust construction for stable machine integration With a mass of 14.2 kg and compact dimensions of 108 x 374 x 100 mm, this machine vice provides a low centre of gravity and stable base when mounted to a machine table. The solid construction contributes to reduced chatter and steadier cuts, which is particularly beneficial for precision tasks. Its size and rigidity strike a balance between shop-floor robustness and the space constraints of modern machining centres, enabling efficient integration without excessive footprint. Arrange a technical consultation with Metav Werkzeuge for the Vertex VMC-4 precision machine vice and secure reliable European supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VMC-4 GTIN: 4061905084324 Manufacturer: Vertex Facts Accuracy: 0.01 mm Clamping force: 1,500 kgf Opening: 0–103 mm Weight: 14.2 kg Dimensions: 108 x 374 x 100 mm eClass: 21020601 ETIM: EC002173 Special features Locking mechanism Precision machine vice design SKU: VMC-4 FAQ What level of precision can be expected from this machine vice? The Vertex VMC-4 achieves precision down to 0.01 mm, enabling repeatable positioning suitable for fine machining and tight tolerance work. What clamping force does the vice provide and why is it important? The vice offers a clamping force of 1,500 kgf, which secures components firmly to reduce vibration and movement during cutting, improving surface finish and tool life. Which workpiece sizes fit the vice? The opening range of 0–103 mm accommodates a wide variety of standard workpieces, allowing flexible setups without frequent fixture changes. Is the vice stable when mounted on a machine table? Yes; with a weight of 14.2 kg and compact dimensions, the vice provides a low centre of gravity and a stable base that helps minimise chatter during machining. What distinguishes the locking feature from a standard vice? The integrated locking mechanism ensures the clamping arrangement remains fixed under load and vibration, enhancing process reliability and part accuracy. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-106mm Self-Centring Machine Vice With Swivel Base, 500 kgf Clamp Force, Cast Iron - Vertex
Benefit from the combination of 500 kgf clamping, cast iron rigidity and a compact 0–106 mm jaw opening for consistent clamping and rapid set-ups. Order the machine vice directly via Metav Werkzeuge or request tailored advice from our consultants. VCV-0611S Machine vice — self-centring, 500 kgf clamping | Vertex The VCV-0611S is a self-centring mechanical machine vice for workshop and production use, optionally supplied with a swivel base for flexible fixturing. Self-centring design for fast part alignment 500 kgf clamping force for secure hold Cast iron body for long-term rigidity Swivel base Ø200 mm for flexible positioning Faster set-up through self-centring alignment The self-centring mechanism reduces positioning time by aligning the jaws around the workpiece automatically, which improves throughput in batch and small-series production. The self-centring function is particularly beneficial when frequent part changes occur, as setup variability is minimised. With a jaw range of 0–106 mm, small to medium components can be clamped without additional fixtures, leading to fewer auxiliary operations and shorter cycle times. Secure hold and consistent clamping performance A clamping force of 500 kgf provides a reliable hold for milling and drilling operations, reducing the risk of workpiece movement under load. The vice’s mechanical actuation delivers repeatable force and stable gripping, which supports dimensional consistency across consecutive parts. The specified accuracy of 0.01 mm ensures fine positional control for precision machining tasks where repeatability matters. Durable construction for workshop environments Constructed from cast iron, the vice offers high rigidity and vibration damping, extending tool and machine life while improving surface finish. The robust build, combined with a gross weight of 11.1 kg, gives a stable base for machining without excessive mass. The vice is a mechanical type designed for everyday industrial use, requiring routine lubrication and inspection to maintain long-term operational reliability. Flexible mounting and practical dimensions An available swivel base with a Ø200×22 mm foot enables adaptable orientation on machine beds or workbenches, allowing efficient access for multi-face machining. The compact external dimensions of 185×61×80 mm make the unit suitable where space is limited yet a secure clamp is required. The combination of compact footprint and robust clamping capability supports versatile workshop layouts and reduces the need for multiple specialised fixtures. Contact Metav Werkzeuge for stock details and tailored supply options for the Vertex VCV-0611S, with delivery and technical advice available directly from our Emmerich facility Technical data Article number: VCV-0611S GTIN: 4061905087844 Manufacturer: Vertex Facts Dimensions: 185×61×80 mm Weight: 11.1 kg Jaw opening: 0–106 mm Clamping force: 500 kgf Accuracy: 0.01 mm Base diameter: Ø200×22 mm Special features Cast iron body Self-centring design Optional swivel base (with Drehbasis) Mechanical type eClass: 21020601 ETIM: EC002173 FAQ What materials can be machined while clamped in this vice? The VCV-0611S is built from cast iron and suitable for clamping a wide range of metals and engineering plastics; selection of cutting parameters should follow material recommendations. Is the swivel base included with the vice? The vice is offered with an optional swivel base; the product description indicates availability with a Drehbasis (swivel base) as a configurable feature. How does the self-centring function improve throughput? The self-centring mechanism centres the workpiece automatically between the jaws, reducing manual alignment time and improving repeatability for batch processes with the VCV-0611S. What mounting footprint is required for stable installation? The swivel base has a foot diameter of Ø200×22 mm, and the compact vice dimensions (185×61×80 mm) facilitate mounting on standard machine tables and benches. What maintenance is recommended to preserve accuracy? Regular cleaning of sliding surfaces, periodic lubrication of the lead screw and inspection of jaw faces will help maintain the specified 0.01 mm accuracy and prolong service life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-106mm Self-Centring Machine Vice, 500 kgf Clamp Force, Cast Iron, 185x61x80mm - Vertex
The combination of a self-centring mechanism, cast iron construction and a high clamping force of 500 kgf provides reliable, vibration-damping hold for milling and drilling operations; excellent for repetitive production tasks. Order the VCV-0611 machine vice directly via Metav Werkzeuge or ask our consultants if needed. VCV-0611 machine vice by Vertex — Self-centring, mechanical vice with optional swivel base A VCV-0611 machine vice designed for secure, repeatable clamping in machining applications, available as a self-centring unit and optionally fitted with a swivel base for flexible setup. Self-centring design for quick workpiece alignment Cast-iron body for damping and stability Clamping opening 0–106 mm for versatile workpieces Secure, repeatable clamping for consistent machining quality The self-centring jaw arrangement delivers fast and uniform alignment of symmetrical workpieces, reducing setup time and minimising repositioning errors. Together with a clamping force of 500 kgf, the device ensures that components remain immobile under cutting loads, improving surface finish and tool life. The design is particularly suited to milling and drilling operations where consistent, repeatable holding is essential for batch production. The result is a measurable improvement in process reliability and throughput when the vice is integrated into a standard machining workflow. Robust construction that reduces vibration and improves accuracy Constructed from cast iron, the vice dampens vibrations generated during machining, which helps protect cutting edges and maintains dimensional integrity. At 5 kg and with compact dimensions of 185 x 61 x 80 mm, the unit offers a stable footprint without occupying excessive machine table space. The option of a swivel base expands clamping orientations, enabling angled setups without complex fixturing. This combination supports operators who require both rigidity and adaptability on manual mills, drilling machines or light CNC machines. Precision and adaptability for workshop and production use With an opening range of 0–106 mm and an indicated accuracy of 0.01 mm, the vice accommodates a broad variety of part sizes while supporting fine positional tolerance where needed. The mechanical actuation provides straightforward maintenance and predictable behaviour across long production runs. As a workholding solution, the device balances precision and durability, making it appropriate for metalworking shops, toolrooms and light manufacturing where dependable clamping and straightforward handling drive productivity gains. For an industrial-grade clamping solution from Vertex, contact Metav Werkzeuge to discuss availability and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VCV-0611 GTIN: 4061905084683 Manufacturer: Vertex Facts Material: Cast iron Clamping force: 500 kgf Opening range: 0–106 mm Accuracy: 0.01 mm Weight: 5 kg Dimensions: 185 x 61 x 80 mm Type: Mechanical eCl@ss: 21020601 ETIM: EC002173 Special features Self-centring design Optional swivel base FAQ What material is the vice made from and why does that matter? The vice is made from cast iron; this material provides damping properties and stability, which reduces vibration during machining and supports consistent surface quality. What is the clamping range and how flexible is it for different parts? The vice offers an opening range of 0–106 mm, allowing secure clamping of a wide variety of component sizes without additional jaws for many common tasks. Can the vice be used on milling machines and drilling machines? Yes, the mechanical design and 500 kgf clamping force make the vice suitable for both milling and drilling applications where rigid holding is required. How precise is the vice for repeatable positioning? The device is specified with an accuracy of 0.01 mm, providing the level of repeatability needed for precision workshop tasks and small-series production. Is a swivel base included and what is the benefit? An optional swivel base is available; it allows angled positioning of the workpiece, increasing flexibility for setups that require compound clamping orientations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-110mm Machine Vice Mechanical 2,000 kgf Clamping Force, 394x246x133mm - Vertex
The combination of 2000 kgf clamping force and a 0–110 mm opening range ensures secure, repeatable clamping for demanding machining tasks; paired with a compact footprint and proven mechanical reliability, this vice supports steady production performance. Order the unit via Metav Werkzeuge or contact the consultants for tailored specification advice. VA-5 Machine vice by Vertex — mechanical vice with 2000 kgf clamping force VA-5 is a mechanical machine vice designed for secure workpiece clamping in milling and drilling operations across workshops and production environments. 2000 kgf clamping force Opening range 0–110 mm High precision: 0.01 mm accuracy Robust 30 kg construction Secure clamping for consistent machining results The vice delivers a 2000 kgf maximum clamping force, which translates into firm workpiece fixation during heavy milling or drilling cycles. This level of restraint reduces vibration and movement, resulting in fewer rejected parts and less rework. The mechanical actuation provides predictable behaviour under load, while the compact footprint keeps the system compatible with standard machine tables. Such characteristics focus on throughput stability and lower scrap rates, making the tool suitable for repetitive production and prototype workshops seeking reliable performance. Precision that shortens setup and improves accuracy An accuracy of 0.01 mm supports tight tolerances and repeatable setups; the vice’s geometry and jaw alignment are engineered to preserve parallelism across the clamping range. The 0–110 mm opening allows versatile part sizes to be accommodated without additional fixtures, reducing changeover time. Explaining the technical term: the stated accuracy indicates the maximum expected deviation in jaw alignment under normal operating conditions, helping to predict machining outcomes. For operations where dimensional conformity is essential, the precision-focused design directly contributes to process reliability and part quality. Durability and workshop-proven mechanical design Built as a mechanical vice, the construction emphasises straightforward, serviceable components that tolerate workshop environments. The substantial mass of approximately 30 kg contributes to stability during cutting, while the simple drive train minimises complex failure modes. This robust approach prioritises long-term uptime and predictable maintenance intervals rather than frequently replaced, sensitivity-prone electronics. The result is a tool that complements routine workshop practices and supports continuous production without unnecessary complication. Practical handling and integration in industrial workflows Attention to practical details ensures compatibility with existing machine setups: the vice’s dimensions of 394 x 246 x 133 mm fit common machine beds and allow straightforward clamping arrangements. Mounting and alignment are simplified by a familiar mechanical layout, which aids rapid installation and repeatable repositioning. For procurement and planning, the combination of high clamping force and compact size offers a balance between performance and space efficiency—useful for machining centres where fixture flexibility is required. The vice supports workflows that value secure holding and consistent part presentation to the tool. Contact Metav Werkzeuge to discuss whether the Vertex VA-5 machine vice with 2000 kgf clamping force meets the application requirements and to arrange supply from our Emmerich quality centre Technical data Article number: VA-5 GTIN: 4061905089947 Manufacturer: Vertex Type: Mechanisch eClass: 21020601 ETIM: EC002173 Core specifications Dimensions: 394 x 246 x 133 mm Weight: 30 kg Opening: 0–110 mm Clamping force: 2000 kgf Accuracy: 0.01 mm Special features Mechanical drive type SKU: VA-5 Category: Vertex FAQ What maximum clamping force does the VA-5 provide? The VA-5 machine vice delivers a clamping force of 2000 kgf, suitable for secure fixation during demanding milling and drilling operations. What is the usable opening range for workpieces? The vice accepts workpieces within a 0–110 mm opening range, enabling flexible clamping of various parts without extra adapters. How precise is the jaw alignment under load? The vice offers an accuracy of 0.01 mm, which indicates reliable parallelism and repeatable positioning for precision machining. Is the VA-5 suitable for installation on standard machine tables? Yes. With dimensions of 394 x 246 x 133 mm and a compact footprint, the VA-5 integrates with common machine beds and fixture layouts. What type of maintenance is required for this vice? Maintenance focuses on routine checks of drive components and lubrication; the mechanical design emphasises serviceability to keep downtime minimal. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-110mm Precision Angle Vice 360° Horizontal 45° Vertical, 15kg Load Capacity - Vertex
Taking advantage of 0.01 mm accuracy together with 360° horizontal and 45° vertical adjustability ensures precise, flexible clamping for complex set-ups; place an order via Metav Werkzeuge or consult the specialists for application advice. Vertex VUA-4 Precision Angle Vice — adjustable 360° horizontal & 45° vertical The Vertex VUA-4 precision angle vice is a compact clamping solution for machining and inspection tasks, combining high repeatability and multi-axis positioning for fixtures and toolroom benches. 360° horizontal rotation for flexible set-ups 45° vertical tilt for angled machining 0–110 mm opening for broad clamping range 0.01 mm accuracy for fine positional control 182 x 110 mm base for stable mounting Reliable precision for repeatable setups The vice provides reliable repeatability through its finely machined dovetail surfaces and adjustment mechanism, delivering an accuracy of 0.01 mm that supports tight tolerances in metrology and light machining applications. With a measurable opening range of 0–110 mm, the clamping device accommodates a wide variety of workpieces while the compact 182 x 110 mm base enables secure fixture mounting on small machine tables. These characteristics translate into fewer repositioning steps and improved throughput on precision tasks. Flexible positioning reduces setup time Built for multi-axis alignment, the vice offers 360° rotation horizontally and a 45° vertical tilt, allowing complex angular clamping without multiple fixtures. The combined adjustments simplify jigs and reduce manual re‑clamping, which enhances workflow efficiency in job shops and maintenance benches. The nominal maximum load of 15 kg together with the robust construction keeps the workpiece steady during light milling, drilling or inspection, improving surface finish and measurement reliability. Engineered for workshop durability Constructed to withstand everyday workshop conditions, the unit’s mass and build provide stability during operation and contribute to vibration damping. The measured 15 kg weight supports a stable centre of gravity, while the precision slide components are designed for long service life under regular use. This results in consistent clamping behaviour over many cycles and a predictable performance profile for production and repair tasks. Clear benefits for procurement and operators Specifying this vice in assembly drawings or tooling lists offers clear technical advantages: compact footprint, precise angular control and broad clamping capacity. The vice’s defined numeric specifications make it straightforward to compare with alternatives and justify integration into existing fixture systems. For buyers seeking dependable clamping with defined performance, this unit combines measurable accuracy with practical adjustability. Contact Metav Werkzeuge for detailed application guidance and to arrange supply of the Vertex VUA-4 precision angle vice for your workshop requirements Technical data Article number: VUA-4 GTIN: 4061905086458 Manufacturer: Vertex Machinery Works Co., Ltd. eClass: 21020601 ETIM: EC002173 Core dimensions and accuracy Weight: 15 kg Opening: 0–110 mm Base: 182 x 110 mm Max load: 15 kg Accuracy: 0.01 mm Features and applications 360° horizontal adjustment 45° vertical tilt Precision angle clamping for machining setups Compact base for stable mounting FAQ What is the maximum clamping width of this vice? The vice offers an opening range of 0–110 mm, allowing secure clamping of a variety of small to medium workpieces with the Vertex VUA-4. How accurate is the positioning when setting angles? Positioning and clamping repeatability are specified at 0.01 mm, providing the fine control required for precision inspection and light machining. Can the vice be used for angled milling operations? Yes, the combination of 360° horizontal rotation and 45° vertical tilt allows angled clamping suitable for many light milling and drilling set-ups. What is the recommended maximum load for stability? The vice has a rated maximum load of 15 kg; adherence to this limit helps maintain stable clamping and consistent accuracy. Is the base size suitable for small machine tables? The vice’s base measures 182 x 110 mm, offering a compact footprint that fits comfortably on small tables and fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-125mm Workshop Vise 360° Swivel Base, 2,300 kgf Clamping Force - Vertex
Take advantage of the combination of strong holding power, a 360° swivel base and a compact footprint to improve bench work efficiency and repeatability. Order the vice directly via Metav Werkzeuge or ask our consultants for product matching and delivery options. BVV-5 workshop vice with 360° swivel base — 2300 kgf holding power (Vertex) A robust BVV-5 workshop vice designed for flexible positioning and heavy-duty clamping in metalworking and general workshop applications 360° swivel base for precise workpiece orientation 2300 kgf clamping force for reliable fixation 0–125 mm jaw opening for versatile clamping Stable 10.5 kg weight with compact footprint Secure, high-force clamping for demanding tasks The BVV-5 bench vice delivers a 2300 kgf clamping capacity that ensures secure fixation of workpieces during machining, filing and assembly. This high holding power reduces workpiece movement and vibration, which improves precision and surface finish in subsequent operations. The specification indicates a vice engineered for repetitive, heavy-duty use; the mechanical design translates directly into fewer re-clamps and more consistent results on the shop floor. The robust holding capability also supports safe use with hand tools and light machine processes. Swivel base for fast reorientation and better access A 360° swivel base provides a practical alternative to repeatedly unclamping and repositioning parts. The rotating mount enables quick orientation adjustments for milling, drilling, grinding or inspection, saving setup time and enabling more ergonomic working positions. Combined with a 0–125 mm jaw opening, the vice accommodates a wide range of component sizes without additional fixtures. This flexibility speeds up multi-step jobs and supports varied workshop workflows, from repair benches to fabrication stations. Weight and dimensions that favour stability and bench economy With a weight of 10.5 kg and compact dimensions of 198 × 370 × 165 mm, the vice balances stability with a small bench footprint. The mass helps keep the jaw faces steady under load, reducing the tendency for the vice to shift during high-force operations. At the same time, the moderate overall size leaves bench space for other tools and measuring equipment, supporting efficient workbench organisation without compromising holding performance. Built to suit professional shops and focused hobbyists This bench vice complements workplaces where consistent clamping, reliable repositioning and straightforward handling are priorities. The combination of a swivel base and high clamping power makes the tool suitable for light machining tasks, assembly and maintenance work. Delivered as a straightforward workshop vice, the unit integrates into existing benches and tooling routines and supports shops seeking dependable everyday performance without complex setup procedures. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex BVV-5 workshop vice and dependable delivery to your workstation Technical data Article number: BVV-5 GTIN: 4061905090851 Brand: Vertex eClass: 21020601 ETIM: EC002173 Core specifications Dimensions: 198 × 370 × 165 mm Weight: 10.5 kg Clamping force: 2300 kgf Jaw opening: 0–125 mm Features & suitability Workshop vice design 360° swivel base for flexible positioning Compact footprint for bench mounting Suitable for general metalworking and workshop use FAQ What holding power does the vice provide? The vice offers a clamping capacity of 2300 kgf; the Vertex BVV-5 is intended for secure fixation during typical workshop tasks. What is the usable jaw opening range? The jaw opening spans 0–125 mm, giving the vice flexibility for a wide variety of part sizes. Can the vice be rotated for easier access during work? Yes, the vice features a 360° swivel base so the clamped part can be reoriented quickly; consult the technical drawing for mounting details. Is the BVV-5 suitable for light machining and filing? The BVV-5 bench vice is designed for heavy-duty clamping and is appropriate for light machining, filing and assembly operations in a workshop environment. What are the physical dimensions and how much space is required on the bench? Overall dimensions are 198 × 370 × 165 mm and the vice weighs 10.5 kg, combining stability with a relatively compact bench footprint. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-128mm Hydraulic Machine Vice Large Opening, 30 kN Clamping Force, Cast Iron - Vertex
The combination of hydraulic actuation, 30 kN clamping force and a 0–128 mm jaw opening delivers stable, repeatable clamping for machining tasks; order the vice directly via Metav Werkzeuge or ask the consultants for integration advice. Vertex VQC-100H Hydraulic machine vice with 30 kN clamping force The VQC-100H is a hydraulic machine vice designed for secure workholding in milling and drilling operations, offering a wide jaw opening and precision clamping for workshop and production use. Hydraulic operation for steady clamping 30 kN clamping force for heavy-duty holding Opening range 0–128 mm Made from cast iron, weight 26.2 kg Consistent clamping for precise machining The hydraulic actuation of this machine vice ensures repeatable clamping pressure, which reduces part movement during cutting and helps maintain tolerance. With a rated 30 kN clamping force and a declared positional accuracy of 0.01 mm, the vice is intended to support machining operations where stability and repeatability matter. The controlled hydraulic pressure prevents sudden jaw shifts common with manual tightening, so cycle-to-cycle consistency is improved and tool wear can be reduced. This results in fewer rejects and a more predictable production flow. Flexible capacity and robust build for varied parts A jaw opening of 0–128 mm makes the vice suitable for a broad range of workpiece sizes without the need for frequent reconfiguration. The body is made from cast iron, which provides inherent damping and stiffness; the vice’s 26.2 kg mass further stabilises the setup on the machine table, reducing vibration and improving surface finish. The compact footprint of 110 x 383 x 120 mm allows the vice to be mounted on many standard machine tables while still leaving room for fixtures and tooling. This balance of opening range, solidity and compact dimensions supports both small-batch and serial production tasks. Designed for workshop efficiency and reliable operation The hydraulic design shortens clamping cycles compared with manual alternatives and contributes to consistent clamping force across repeated operations, supporting higher throughput and predictable machining results. The vice’s construction focuses on long-term serviceability and industrial use, with a brand pedigree that aligns with professional expectations. Integration into existing workflows is straightforward thanks to familiar mounting dimensions and a conservative, durable design that prioritises uptime and operator safety. Enquire with Metav Werkzeuge about the Vertex VQC-100H hydraulic machine vice—our specialists in Emmerich will advise on delivery, mounting options and lead times; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical Data Article number: VQC-100H GTIN: 4061905089800 Manufacturer: Vertex Facts Clamping force: 30 kN Opening range: 0–128 mm Accuracy: 0.01 mm Weight: 26.2 kg Dimensions: 110 x 383 x 120 mm Special features Material: cast iron Type: Hydraulic SKU: VQC-100H ECLASS: 21020601 ETIM: EC002173 FAQ What clamping force does the vice provide? The Vertex VQC-100H hydraulic machine vice delivers a clamping force of 30 kN, suitable for robust holding during demanding milling and drilling operations. What is the usable jaw opening? The vice offers an opening range of 0–128 mm, allowing flexible clamping of a wide variety of workpiece sizes without additional jaw extensions. How precise is the clamping position? Positional accuracy is specified at 0.01 mm, reflecting the vice’s suitability for applications where repeatable workholding is required to maintain machining tolerances. What material is the vice made from and why does it matter? The vice is constructed from cast iron, which provides stiffness and damping that help reduce vibration and improve surface finish during cutting. Is the VQC-100H suitable for a production environment? Yes. The hydraulic actuation and robust construction of the Vertex VQC-100H are aimed at reliable, repeatable operation in workshop and light production settings. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-128mm Machine Vice Large Opening, 30 kN Clamping Force, Cast Iron, Mechanical - Vertex
Take advantage of robust clamping power and precise guidance for repeatable setup times; the combination of a cast iron body, 30 kN clamping force and a 0–128 mm opening ensures dependable performance across varied workpieces. Order directly via Metav Werkzeuge or ask the consultants for advice. VQC-100 machine vice (mechanical) – large opening, 30 kN clamping force by Vertex The VQC-100 is a mechanical machine vice engineered for secure clamping of medium-sized components in machining and production environments, featuring a wide opening and industrial-grade construction. Large 0–128 mm opening 30 kN clamping force Cast iron construction Accuracy 0.01 mm Consistent high-force clamping for reliable machining A compact yet heavy-duty clamping solution, the vice combines a cast iron construction with a rated 30 kN clamping capacity to minimise deformation and vibration during cutting operations. The robust base and precision-machined guideways deliver accuracy 0.01 mm, which translates into stable tool engagement and fewer setup corrections between batches. For shops requiring predictable clamping pressure and minimal workpiece shift, this configuration reduces rework and shortens cycle times without complex adjustments. Efficient workflow through wide opening and repeatable setups The mechanical vice design offers a large opening range of 0–128 mm, enabling quick accommodation of varying part heights and cross-sections on the same machine table. The unit’s mass (23.2 kg) and dimensions (110 x 356.5 x 120 mm) provide a secure footprint while remaining straightforward to mount and align. Where hydraulic actuation is preferred, an optional hydraulic variant is available, allowing process planners to select the actuation method that best suits automation level and table space. Consistent clamping force and engineered guideways improve repeatability, reducing inspection cycles and supporting just-in-time production demands. Practical maintenance and application flexibility Designed for shop-floor resilience, the vice’s materials and mechanics are selected for long service life with routine maintenance. The hardened contact surfaces and stable body reduce wear and preserve positional precision over extended production runs. The unit suits general machining and production use, from prototyping to small-series manufacturing, and integrates well with standard milling and drilling fixtures. With Vertex engineering and a straightforward mechanical layout, the design balances ease of use with the precision expected in industrial clamping tools while keeping operational complexity low. For robust clamping delivered by Vertex quality, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data SKU: VQC-100 GTIN: 4061905087790 Manufacturer: Vertex Type: Mechanical vice Facts Dimensions: 110 x 356.5 x 120 mm Weight: 23.2 kg Opening range: 0–128 mm Clamping force: 30 kN Accuracy / repeatability: 0.01 mm Materials & special features Body material: cast iron Large opening, optional hydraulic version available Designed for machine-table mounting Industrial-grade guideways for repeatability FAQ What clamping range does the vice cover? The VQC-100 provides an opening range of 0–128 mm, suitable for a wide variety of medium-sized components. What level of clamping force is available? The vice delivers a rated 30 kN clamping force, balancing strong hold with reduced part distortion. Is there a hydraulic option for this vice? An optional hydraulic version is indicated alongside the mechanical configuration, allowing selection based on automation needs. How precise is the vice for repeatable setups? Specification for the machine vice indicates an accuracy/repeatability of 0.01 mm, supporting tight positional control during machining. What material is the vice constructed from? The main body is manufactured from cast iron, chosen for stability and vibration damping in machining applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-132mm Self-Centering Machine Vice, Mechanical, 1000 kgf Clamping Force, Cast Iron - Vertex
High clamping force and precise alignment enable reliable workholding across demanding milling and drilling tasks; combine 1000 kgf clamping force with a 0–132 mm opening and 0.01 mm accuracy for consistent production. Order the VCV-10130 machine vice directly via Metav Werkzeuge or ask our consultants if needed. VCV-10130 machine vice by Vertex — self-centring, high clamping force The VCV-10130 is a self-centring mechanical machine vice designed for precise milling and drilling operations, optionally available with a swivel base for flexible workpiece orientation. Self-centring jaw mechanism 1000 kgf clamping force 0–132 mm opening range 0.01 mm positional accuracy Stable clamping for consistent machining outcomes A robust clamping solution, the vice delivers a 1000 kgf holding force combined with a cast iron body to resist deformation under load. This construction increases repeatability in series production and reduces rework: parts remain secure during heavy cuts, so machining tolerances are maintained. The mass of the unit contributes to vibration damping, improving surface finish and tool life while ensuring the workholding remains reliable throughout longer cycles. Faster setup through self-centring and swivel options The integrated self-centring jaw action simplifies part loading and alignment, reducing setup time and minimising the need for repeated manual adjustments. Where component orientation varies, the optional swivel base permits quick rotation of the clamped piece without reclamping, shortening cycle times and increasing throughput. A nominal 0–132 mm opening range covers a wide variety of workpieces, supporting flexible job planning in mixed-production environments. Precision that supports accurate machining strategies With a quoted positional accuracy of 0.01 mm, this clamping device supports fine-tolerance work and precise referencing for toolpaths. For operators new to high-precision setups, that figure means deviations are measured in hundredths of a millimetre, allowing consistent alignment between successive operations. The vice’s mechanical design translates spindle forces into secure holding, so cutting parameters can be pursued at higher feed rates while maintaining dimensional integrity. Built for workshop durability and practical use Manufactured in cast iron and designed as a mechanical unit, the vice tolerates the rigours of daily shop use with minimal maintenance. The simple, rugged mechanism reduces downtime and facilitates routine inspection and lubrication. Its overall dimensions and weight contribute to a stable base when mounted on milling or drilling tables, and the model’s engineering supports repetitive tasks across small-batch and medium-series production. Contact Metav Werkzeuge to discuss how the Vertex VCV-10130 machine vice can be integrated into existing workflows; Metav’s advisers in Emmerich will provide practical guidance and technical details to assist specification and ordering Technical Data SKU: VCV-10130 GTIN: 4061905093500 Brand: Vertex Type: Mechanical Dimensions: 260 x 101 x 120 mm Core specifications Clamping force: 1000 kgf Opening range: 0–132 mm Accuracy: 0.01 mm Weight: 18.5 kg Materials & features Material: Cast iron Self-centring mechanism Optional swivel base Mechanical operation FAQ Which materials is the vice constructed from and what does that mean for durability? The Vertex VCV-10130 machine vice is made from cast iron, which provides high rigidity and good wear resistance for reliable durability in routine milling and drilling tasks. Is a swivel base included and how is it used? An optional swivel base is available for the VCV-10130; when fitted, it allows the clamped workpiece to be rotated precisely without reclamping, aiding multi-angle machining. What does the accuracy value of 0.01 mm imply for typical workshop use? An accuracy of 0.01 mm indicates the vice supports fine positioning within hundredths of a millimetre, suitable for tight tolerance machining and consistent part-to-part alignment. What maximum workpiece width can be clamped? The vice provides an opening range of 0–132 mm, covering a broad span of component sizes commonly encountered in metalworking. How does the clamping force affect machining performance? The 1000 kgf clamping force ensures firm workpiece retention under heavy cutting loads, improving stability, surface finish and reducing the likelihood of movement during aggressive machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-132mm Self-Centre Machine Vice With Swivel Base, 1000 kgf Clamping Force - Vertex
Combining a cast iron body with a 1000 kgf clamping force and a 0–132 mm jaw range, the vice provides stable, repeatable clamping for machine work. Order the unit directly via Metav Werkzeuge or ask Metav's consultants for tailored technical advice. VCV-10130S Mechanical machine vice with self‑centring jaws and optional swivel base — Vertex A VCV-10130S mechanical machine vice designed for precise, repeatable clamping in machining centres and toolroom applications Self‑centring mechanical vice with swivel base option 0–132 mm jaw opening for versatile clamping 1000 kgf clamping force for secure fixation Robust cast iron body, weight 26 kg for stability Stability that reduces vibration and improves finish A heavy, rigid construction delivers measurable advantages in everyday machining. The cast iron body, combined with a 26 kg mass, reduces vibration and helps maintain consistent contact between workpiece and tool; the effect is improved surface finish and extended tool life. The vice's base, sized Ø248 x 22 mm, allows secure mounting to rotary or fixed tables, ensuring the clamping arrangement remains stable under load. These characteristics translate directly into fewer reworks and more predictable cycle times for production runs. Accurate, repeatable alignment for batch work Designed for repeat accuracy, the vice offers precision 0.01 and a self‑centring jaw mechanism that aligns workpieces automatically, minimising setup time between parts. The 0–132 mm jaw range gives flexibility for a variety of component sizes while retaining concentric clamping forces across the jaw faces. The mechanical drive avoids reliance on hydraulic systems, which simplifies maintenance and keeps downtime low; the result is efficient, repeatable clamping well suited to repetitive machining tasks. Flexible positioning with optional swivel base An available swivel base expands the vice's utility where angled clamping or rapid repositioning is required. The mechanical construction supports safe indexing and secure locking without complex fixtures, making the unit appropriate for drilling, milling and general machine shop operations. The combination of a compact footprint (260 x 101 x 120 mm) and the robust base diameter enables straightforward integration into existing workholding layouts, improving workflow without large modifications to machines or benches. Simple integration, long service life The vice's combination of solid materials and straightforward mechanical components keeps upkeep predictable: occasional lubrication and checks of the lead screw and jaws are generally sufficient to sustain performance. The 1000 kgf clamping force and durable jaw surfaces ensure long-term resistance to deformation under typical shop loads. When selecting workholding for stable production, the mechanical design reduces complexity and supports reliable part quality over extended periods. For dependable clamping from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and prompt delivery — Metav's specialists will assist with mounting options and technical integration Technical Data Article number: VCV-10130S GTIN: 4061905089343 Manufacturer: Vertex Machinery Works Co., Ltd. ECLASS: 21020601 ETIM: EC002173 Facts Opening: 0–132 mm Clamping force: 1000 kgf Weight: 26 kg Dimensions: 260 x 101 x 120 mm Base: Ø248 x 22 mm Precision: 0.01 Special features Material: Cast iron Type: Mechanical Feature: with swivel base (optional) Configuration: Self‑centring jaws SKU: VCV-10130S FAQ What jaw opening range does the vice provide? The vice offers a jaw opening range of 0–132 mm, suitable for a wide variety of workpiece sizes. What clamping force can be expected from this machine vice? The vice delivers a clamping force of 1000 kgf, providing secure fixation for machining operations. Is a swivel base included or optional? A swivel base is available as an option; the vice can be supplied either with or without the rotating base depending on the chosen configuration. What material is the vice made from and how does that benefit workshop use? The body is made of cast iron, which provides damping and stability under load, improving surface finish and reducing vibration during cutting. What is the product designation and who manufactures it? The item is supplied as the VCV-10130S mechanical machine vice by Vertex, designed for accurate, repeatable clamping in machining environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-135mm Grinding Vise VC Precision Clamping Screwstock - Vertex
Compact dimensions and a wide clamping range provide dependable holding performance for grinding applications; the solid 9.02 kg construction reduces vibration and supports consistent results. Order the Vertex VC40 grinding vice directly via Metav Werkzeuge or ask our consultants if needed. VC40 grinding vice by Vertex — 0–135 mm opening, 9.02 kg VC40 is a compact grinding vice engineered for secure clamping during bench grinding and tool reconditioning, offering a broad jaw opening for varied workpieces. Robust 9.02 kg construction Clamp opening 0–135 mm Compact size: 98×245×90 mm Designed for bench grinding tasks Consistent, vibration‑damping clamping for precise results The vice’s substantial mass ensures stable clamping during abrasive operations, which reduces movement and improves surface finish consistency. With a specified weight of 9.02 kg, the assembly resists the oscillations that can lead to rework, making it suitable where repeatable accuracy is essential. The measurable 0–135 mm jaw opening enables secure holding across a wide range of component sizes without frequent fixture changes, sustaining throughput in production and repair tasks. Compact footprint that fits workshop setups easily A compact external profile of 98×245×90 mm keeps the vice unobtrusive on crowded benches while still providing a practical working envelope. The modest dimensions simplify integration with bench grinders and toolroom stations, saving valuable workspace and enabling flexible placement. The reduced footprint supports ergonomic workflow planning and makes the unit straightforward to install or reposition as shop layouts evolve, contributing to efficient shop organisation. Traceable classification and clear procurement identifiers The vice is catalogued under ECLASS 21020601 and ETIM EC002173, which facilitates procurement, inventory management and compatibility checks in professional workflows. Identifiers such as GTIN 4061905095085 and SKU VC40 enable unambiguous ordering and stock control. These classification details support documentation requirements for quality systems and make replacement or spare‑part sourcing more efficient in industrial and craft environments. For technical clarification or procurement advice on the Vertex VC40 grinding vice, contact Metav Werkzeuge in Emmerich — information and personal consultation are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930; WhatsApp queries accepted at +49 170 2837271 Technical data Article number: VC40 GTIN: 4061905095085 Brand: Vertex Product type: grinding vice Facts Opening range: 0–135 mm Dimensions: 98×245×90 mm Weight: 9.02 kg ECLASS: 21020601 ETIM: EC002173 Special features Product series: VC Intended use: grinding vice Manufacturer: Vertex FAQ What clamping range does the vice offer? The Vertex VC40 grinding vice provides a clamping range of 0–135 mm, allowing secure holding of small to medium workpieces. What are the dimensions and weight of the unit? The VC40 measures 98×245×90 mm and weighs 9.02 kg, offering a compact footprint with substantial mass for vibration damping. Is this vice suitable for bench grinding tasks? Yes, the Vertex VC40 is specified as a grinding vice and is designed to be used with bench grinding and related abrasive operations. Which identifiers assist with procurement and inventory? Key identifiers for the VC40 are GTIN 4061905095085, SKU VC40, ECLASS 21020601 and ETIM EC002173, which aid ordering and stock management. What benefits does the vice’s mass provide during grinding? The 9.02 kg construction of the VC40 reduces vibration and improves stability, leading to more consistent surface finishes and reduced rework. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-150mm Machine Vice Mechanical 2,500 kgf Clamping Force, 452x288x158mm - Vertex
The combination of 2500 kgf clamping force, a 0–150 mm jaw opening and 0.01 mm repeatability delivers consistent, downtime‑free clamping for production environments; order the VA‑6 machine vice directly via Metav Werkzeuge or consult our specialists for application advice Vertex VA‑6 machine vice — mechanical clamping with 2500 kgf force and 0–150 mm opening VA‑6 machine vice is a mechanically operated clamping solution for machine tables and workshop applications, offering precise holding power for medium to heavy machining tasks 2500 kgf clamping force for secure holding 0–150 mm jaw opening for versatile workpieces Accuracy: 0.01 mm for repeatable positioning Robust 42 kg mass for vibration damping Consistent holding power to protect cycle quality A high clamping force of 2500 kgf ensures workpieces are held firmly during milling, drilling and other machine operations. The heavy construction increases contact stability and reduces micro‑movement, which directly improves surface finish and tool life. For production runs where process stability is essential, the vice’s design converts clamping force into predictable machining results, reducing rework and scrap. Flexible jaw opening for a wide range of components The 0–150 mm jaw opening allows secure clamping of small fixtures up to larger components without frequent equipment changes. The jaw travel is straightforward to measure and set, giving operators clear, reproducible clamp positions for batch work. This range also supports quick set‑up when alternating between different part geometries, improving throughput and reducing non‑productive time. Repeatable accuracy and stable machine integration With an indicated accuracy of 0.01 mm, the vice supports operations requiring precise part alignment. The substantial 42 kg mass suppresses chatter and stabilises the setup on the machine table, making the vice suitable for demanding cutting parameters. The mechanical actuation is durable and simple to maintain; basic checks keep the clamping mechanism reliable over long service intervals. Practical handling, maintenance and supply chain confidence The mechanical construction simplifies routine maintenance and avoids complex electronics, while available technical drawings aid integration into existing fixtures. As a supplier partner, Metav provides dependable availability and technical documentation, helping workshops secure parts and plan installations without supply uncertainty. This combination of product robustness and reliable distribution supports uninterrupted production planning. Contact Metav Werkzeuge in Emmerich for tailored application advice or a technical quotation for the Vertex VA‑6 machine vice Technical data Article number: VA‑6 GTIN: 4061905089299 Brand: Vertex Facts Dimensions: 452 x 288 x 158 mm Weight: 42 kg Jaw opening: 0–150 mm Clamping force: 2500 kgf Accuracy: 0.01 mm Type: Mechanical Special features Mechanical operation Suitable for machine‑table mounting Technical drawing and detail images available SKU: VA‑6 FAQ What clamping force does the VA‑6 provide? The Vertex VA‑6 machine vice delivers a clamping force of 2500 kgf, ensuring secure holding for a wide range of machining tasks. What is the usable jaw opening range? The VA‑6 offers a jaw opening of 0–150 mm, allowing flexible clamping of both small and medium‑sized components. How precise is the positioning with this vice? The vice is specified with an accuracy of 0.01 mm, supporting repeatable alignment and consistent machining results. Is the VA‑6 suitable for heavy cutting operations? The substantial mass of 42 kg and mechanical clamping design make the VA‑6 appropriate for many demanding machining operations where stability is required. Are installation drawings available for machine integration? Yes, technical drawings and product images for the VA‑6 are available to support mounting and fixture planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-150mm Precision Machine Vice With Locking, 2,500 kgf Clamping Force, 29.8kg - Vertex
Take advantage of a combination of high clamping force and fine accuracy for secure, repeatable milling operations; the integrated locking mechanism and robust build reduce setup time and increase throughput. Order the vice directly via Metav Werkzeuge or ask our consultants for application advice. Precision machine vice VMC-6 — 2,500 kgf clamping • 0–150 mm opening (Vertex) The Precision machine vice VMC-6 is a locking vice engineered for secure clamping on milling machines and machining centres, optimised for repeatable setups and demanding shop-floor use. High 2,500 kgf clamping force 0–150 mm adjustable opening Accuracy of 0.01 mm Integrated locking mechanism Secure clamping that shortens setup cycles The high clamping force of 2,500 kgf ensures workpieces remain immobile under heavy milling loads, reducing vibration and tool chatter. A firm clamp translates directly into fewer rejected parts and longer tool life; when the vice holds parts steadily, cutting parameters can be pushed closer to optimal without risking slippage. The integrated locking mechanism provides reliable retention for repeat operations, so set-up time is reduced and cycle consistency improves. Precision and repeatability for accurate components With an accuracy of 0.01 mm and an adjustable opening range of 0–150 mm, the vice supports fine positioning and consistent results across batches. The close tolerance capability makes the device suitable for jobs where dimensional conformity is critical; operators gain measurable process control, which benefits quality assurance and traceability. The precision specification is particularly helpful when finishing components that require tight tolerances. Robust construction engineered for the machine shop At approximately 29.8 kg, the vice combines mass and stability without excessive bulk, creating a secure workholding platform that resists movement under load. The design focuses on robust construction and durability to withstand daily industrial use, helping to protect both tool and workpiece. Materials and geometry concentrate mass where it is needed to dampen vibration and maintain alignment during aggressive machining. Operational advantages and practical handling The vice’s functional layout supports efficient clamping and clearing between operations: the broad opening range and mechanical locking allow fast insertion and removal of workpieces while maintaining repeatability. This balance of accessibility and control yields productivity gains on the shop floor; secure clamping reduces rework and supports a smoother production flow. Clear, measurable specifications aid in integrating the vice into standard operating procedures and fixtures. For specification support or to arrange supply of this Vertex vice from Metav Werkzeuge’s Emmerich depot, contact our technical consultants for tailored guidance and delivery options. Technical data SKU: VMC-6 GTIN: 4061905092923 Dimensions: 156 x 472 x 120 mm Weight: 29.8 kg Clamping force: 2,500 kgf Facts Opening range: 0–150 mm Accuracy: 0.01 mm ECLASS: 21020601 ETIM: EC002173 Special features Integrated locking mechanism Suitable for machine-mounting Robust construction for industrial use Brand: Vertex FAQ What clamping force does the vice provide? The vice delivers a clamping force of 2,500 kgf, which is specified for the Precision machine vice VMC-6 to ensure secure holding during milling operations. What is the usable opening range for workpieces? The vice offers an opening range of 0–150 mm, allowing flexible clamping of a variety of part sizes while maintaining consistent alignment. How precise is the vice for repeatable setups? Repeatability is supported by an accuracy of 0.01 mm, making the vice suitable for applications that demand tight dimensional control. Is the VMC-6 suitable for heavy-duty milling? Yes; the combination of 2,500 kgf clamping force and robust construction makes the vice well suited to heavy milling and operations that generate significant cutting forces. Can the vice be mounted directly to a milling machine table? The vice is designed for machine mounting and for use on milling tables and machining centres, providing a stable and repeatable workholding solution. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-170mm Hydraulic Machine Vice 2,500 kgf Clamping Force, 28 kg - Vertex
Take advantage of the combination of hydraulic power, high clamping force and fine accuracy to streamline machining operations; order the item directly via Metav Werkzeuge or consult the specialists for tailored recommendations. Vertex VH-4 Hydraulic Machine Vice – 2,500 kgf clamping force, 0–170 mm opening A Vertex VH-4 hydraulic vice engineered for secure and repeatable workholding in milling machines and machining centres. 2,500 kgf clamping force for heavy-duty work 0–170 mm adjustable opening range High precision with 0.02 mm accuracy Robust 28 kg construction for stability Consistent heavy-duty clamping for demanding machining The hydraulic drive delivers steady, repeatable clamping that minimises slippage during aggressive cuts. With a rated 2,500 kgf clamping force and an opening range of 0–170 mm, the vice secures a wide variety of workpieces without frequent repositioning. The substantial mass and robust construction contribute to vibration damping and stable machining, which reduces tool wear and extends cycle life. Designed for production and jobbing environments, this vice supports uninterrupted processing where firm workholding is critical. Engineered accuracy improves process reliability Precision is central to stable production; the vice is specified with 0.02 mm accuracy, improving positional repeatability between setups. This level of control helps maintain tolerances across batches and simplifies downstream inspection. The mechanical layout, combined with hydraulic actuation, ensures consistent jaw alignment and clamping pressure, resulting in fewer rejects and less rework. For users assessing process capability, the repeatability characteristics translate directly into predictable part quality and more efficient throughput. Ready for integration and straightforward operation Mounting and routine handling are uncomplicated thanks to clear external dimensions (443 x 270 x 135 mm) and a compact footprint that fits most machining worktables. At approximately 28 kg, the unit balances portability for repositioning with the mass required for stable cutting. The vice’s classification data (ECLASS and ETIM) support compatibility checks in engineering procurement systems, while the solid construction minimises maintenance intervals. Where uptime matters, reliable workholding and straightforward serviceability keep production moving. Contact Metav Werkzeuge for detailed integration advice and secure supply directly from our Emmerich quality hub Technical Data SKU: VH-4 GTIN: 4061905084171 Manufacturer: Vertex Type: Hydraulic Core specifications Clamping force: 2,500 kgf Opening range: 0–170 mm Accuracy: 0.02 mm Weight: 28 kg Dimensions: 443 x 270 x 135 mm Features & compatibility Hydraulic operation ECLASS: 21020601 ETIM: EC002173 Robust construction for vibration damping FAQ What clamping force does the vice provide? The vice offers a clamping force of 2,500 kgf, providing secure workholding for heavy-duty machining operations. Which opening range is supported for different workpieces? The vice supports an adjustable opening range of 0–170 mm, allowing adaptable clamping across a broad variety of part sizes. How precise is the workholding alignment? The vice is specified with 0.02 mm accuracy, ensuring high repeatability and consistent part tolerances during serial production. Is the vice suitable for mounting on standard milling tables? Yes, the compact footprint (443 x 270 x 135 mm) and mounting compatibility make it suitable for common milling and machining tables. What benefits does hydraulic actuation bring compared with mechanical vices? Hydraulic actuation provides smoother and more consistent clamping pressure, improving repeatability and reducing the risk of part movement under load. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-170mm Hydraulic Machine Vice Forward-Tilting, 2,500 kgf Clamping Force, 33.3 kg - Vertex
Combine the forward-tilting hydraulic design with a 2,500 kgf clamping force and 0.01 mm repeatability to secure workpieces reliably while reducing setup time — order the vice directly via Metav Werkzeuge or request advice from our consultants. Vertex VHT-4 Hydraulic Machine Vice (forward-tilting, 2,500 kgf clamping force) The VHT-4 Hydraulic Machine Vice is a forward-tilting clamping solution designed for demanding milling and machining applications where repeatable, high clamping forces and easy access to the workpiece are required Forward-tilting design for angled clamping 2,500 kgf clamping force 0–170 mm clamping range High precision: 0.01 mm repeatability Robust 33.3 kg construction Consistent clamping for repeatable production Hydraulic clamping delivers a predictable and steady force that minimises variability between cycles. The integrated hydraulic mechanism on this machine vice ensures a uniform 2,500 kgf of clamping pressure, which reduces the risk of slippage under heavy machining loads and improves part consistency. The result is shorter inspection runs and fewer rejected components, so throughput and shop-floor efficiency are improved without compromising safety. The design supports high cutting forces while protecting delicate fixturing and tooling through even pressure distribution. Easier setup and superior accessibility for complex parts A forward-tilting vice enables more versatile part placement and easier tool approach angles compared with fixed horizontal vices. With a 0–170 mm clamping range, the unit accommodates a broad spectrum of component sizes and profiles, making it suitable for prototyping as well as small-batch production. The tilting feature reduces the need for auxiliary fixtures to obtain angled clamping positions, which shortens setup time and simplifies repeated jobs. For machine shops aiming to reduce non-productive time, this configuration offers clear operational advantages. Precision and rigidity where it matters Accuracy is central to machining quality; the vice offers a nominal 0.01 mm repeatability that supports tight tolerance work. The substantial mass of the unit — approximately 33.3 kg — contributes to vibration damping and structural rigidity during heavy milling and boring operations. Those properties combine to maintain cutting stability and preserve tool life, which in turn lowers overall operating costs. The geometry and finish of the clamping faces are engineered to secure workpieces reliably while minimising deformation. Practical operation and workshop integration The hydraulic actuation on this vice reduces manual effort and streamlines clamping operations, enabling faster cycle times in automated or semi-automated environments. Its construction and finish are optimised for integration on standard machine tables; the vice is compatible with typical machining centre workflows and offers a compact footprint of 500x240x230 mm. For purchasers seeking scalable solutions, the unit’s repeatable hydraulic performance and robust build make it a dependable choice for continuous production environments. For tailored specification advice or to arrange supply of the Vertex VHT-4 via Metav Werkzeuge, please contact Metav’s sales team in Emmerich — they will assist with suitability assessments and order processing Technical data SKU: VHT-4 GTIN: 4061905084850 ECLASS: 21020601 ETIM: EC002173 Type: Hydraulisch Designation: Hydraulischer Maschinenschraubstock (kippbar) Special feature: vorwärts kippbar Dimensions: 500x240x230 mm Core measurements Clamping force: 2,500 kgf Opening range: 0–170 mm Accuracy / repeatability: 0.01 mm Weight: 33.3 kg Features & specifications Forward-tilting clamping capability Hydraulic actuation for consistent force Suitable for milling and machining applications Compact footprint for bench and machine table use Manufacturer: Vertex FAQ What clamping force does this vice provide? The vice delivers a clamping force of 2,500 kgf, specified for the Vertex VHT-4 hydraulic machine vice to secure heavy machining loads. What workpiece sizes are supported? The unit accepts workpieces within a 0–170 mm clamping range, allowing flexible use for small to medium components. How precise is the clamping repeatability? Repeatability is rated at 0.01 mm, which supports precision machining and consistent part quality with the Vertex VHT-4. Is the vice suitable for angled clamping setups? Yes, the forward-tilting design enables angled-clamping arrangements without complex additional fixtures, improving accessibility for tool approaches. What are the vice dimensions and weight for machine-table planning? The vice measures 500x240x230 mm and weighs approximately 33.3 kg, providing stability while keeping a compact footprint. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-170mm Hydraulic Machine Vice Side-Tilt Function, 2,500 kgf Clamping Force - Vertex
Take advantage of the combination of high clamping force, lateral tilt flexibility and precision repeatability for reliable, efficient machining operations; order directly via Metav Werkzeuge or contact our consultants for application advice. VHT-4U Hydraulic machine vice — 2,500 kgf clamping force, side-tilting (Vertex) The VHT-4U is a hydraulic machine vice engineered for secure, repeatable clamping with a side-tilting function suited to versatile machining and fixture setups Hydraulic clamping with 2,500 kgf Side-tilting for angled machining Opening range 0–170 mm High repeatability of 0.01 mm Secure clamping for heavy-duty machining The vice delivers a clamping force of 2,500 kgf, which establishes a secure hold for demanding milling and drilling tasks. Hydraulic actuation produces uniform pressure across the jaw faces, reducing the risk of workpiece movement under cutting loads and improving tool life through stable cutting conditions. The robust mass and a weight of 38.5 kg contribute to vibration damping and machine stability, which is particularly important for operations that require consistent surface finish and tight dimensional control. Flexible setup enabled by lateral tilt A side-tilting mechanism expands fixturing options by allowing the clamping angle to be adjusted without relocating the vice. This feature supports angled machining and multi-axis access while maintaining clamping integrity, so complex components can be processed with fewer set-ups. The vice’s opening range of 0–170 mm accommodates a wide variety of part sizes, enabling rapid reconfiguration of fixtures and reducing non-productive time between batches. Precision and repeatability that support quality output Designed for repeatable positioning, the unit offers a repeatability of 0.01 mm, which helps maintain consistent datum references across serial production. This level of accuracy supports downstream inspection processes and reduces the need for manual rework. Hydraulic actuation with precise control ensures that each clamp cycle delivers comparable holding performance, so tolerances are reliably met throughout production runs. Compact footprint with practical integration benefits With external dimensions of 690 x 165 x 175 mm, the vice is compact enough for straightforward integration into existing machine tables and pallet systems while still providing substantial clamping capability. The combination of compact dimensions and heavy construction allows the vice to be mounted close to the spindle axis for improved rigidity. The design facilitates secure bolting to machine tables and straightforward alignment into production jigs, enabling a tidy and efficient workspace layout. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VHT-4U into production; our consultants are available via info@metav-werkzeuge.com or by phone to discuss fixturing options and compatibility Technical data Article number: VHT-4U GTIN: 4061905091759 Manufacturer: Vertex eClass: 21020601 ETIM: EC002173 Facts Dimensions: 690 x 165 x 175 mm Opening range: 0–170 mm Clamping force: 2,500 kgf Repeatability / Accuracy: 0.01 mm Weight: 38.5 kg Special features Side-tilting (laterally tiltable) Hydraulic operation Type: Hydraulic machine vice SKU: VHT-4U FAQ What clamping force does the vice provide? The vice offers a clamping force of 2,500 kgf, providing secure holding for heavy-duty machining with the Vertex VHT-4U hydraulic machine vice. Which workpiece sizes can be accommodated? With an opening range of 0–170 mm, the vice accepts a broad spectrum of part dimensions for typical milling and drilling tasks. How accurate and repeatable is the clamping? The device provides a repeatability of 0.01 mm, supporting consistent datum references and reducing required inspection adjustments. Is the vice suitable for angled machining? Yes — the side-tilting design enables angled setups and better access for multi-axis machining without relocating the vice. What are the installation considerations for machine integration? The compact external dimensions (690 x 165 x 175 mm) and a weight of 38.5 kg mean the vice can be bolted to machine tables or pallets for stable integration while minimising the footprint required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
0-180mm Self-Centering Machine Vice With Swivel Base, 1000 kgf Clamp Force - Vertex
Reliable clamping performance and robust cast iron construction provide long-term stability; the self-centring mechanism and 1,000 kgf clamping force enable fast, repeatable setups for production and toolroom use. Order the VCV-13180DS directly via Metav Werkzeuge or ask our consultants if needed. VCV-13180DS Machine vice — self-centring, 0–180 mm opening The VCV-13180DS is a mechanical, self-centring machine vice designed for precision clamping and flexible workshop integration Self-centring mechanism for symmetrical clamping Clamping range 0–180 mm 1,000 kgf nominal clamping force Durable cast iron construction Exceptional repeatability for batch work The self-centring design guarantees symmetric grip on workpieces, reducing setup variability and cycle time in repetitive tasks. With a rated accuracy 0.01 mm, the vice supports consistent positioning across production runs and inspection routines. The combination of precise alignment and a 1,000 kgf clamping specification translates into reliable fixation for machining, drilling and finishing operations, improving process stability and part-to-part conformity. Built for heavy-duty workshop environments Manufactured from cast iron, the vice offers mass and rigidity that dampen vibration and resist creep under load. The solid construction and the substantial mass of 36 kg contribute to cutting stability and tool life when working with demanding feeds or interrupted cuts. The robust materials and mechanical drive train are optimised for long service intervals, making the vice a durable choice for metalworking shops and vocational toolrooms where sustained performance matters. Flexible mounting and ergonomic orientation A wide 0–180 mm jaw opening covers a broad spectrum of components, from small fixtures to larger workpieces, while the optional swivel base allows ergonomic repositioning without re-clamping. The vice mounts on a stable footprint, specified as Ø296×22 mm foot, and its compact external dimensions make it simple to integrate onto benches or machine tables. Mechanical actuation provides tactile feedback during clamping, supporting precise force control for delicate setups and heavy clamping alike. Low-maintenance operation and workshop compatibility The mechanical construction minimises electronics and simplifies maintenance, with service tasks limited to lubrication and occasional inspection of the lead screw and jaw surfaces. The design supports straightforward retrofitting into existing fixtures or modular tooling systems, helping to reduce downtime during changeovers. Clear, verifiable specifications and the vice’s sturdy build mean predictable behaviour across shifts, supporting consistent output and fewer rejected parts. For dependable clamping in production or the toolroom, secure the Vertex VCV-13180DS through Metav Werkzeuge — contact the Emmerich team for specification guidance and fast delivery Technical Data Article number: VCV-13180DS GTIN: 4061905091223 Manufacturer: Vertex Facts Opening: 0–180 mm Clamping force: 1,000 kgf Accuracy: 0.01 mm Weight: 36 kg Dimensions: 312×131×120 mm Special features Material: Cast iron Type: Mechanical Foot: Ø296×22 mm Self-centring, optional swivel base SKU: VCV-13180DS FAQ How does the self-centring mechanism improve setup speed? The self-centring system ensures jaws align symmetrically around the workpiece, shortening alignment time and reducing the number of adjustments required with the VCV-13180DS machine vice. What does an accuracy of 0.01 mm mean in practice? An accuracy 0.01 mm indicates the vice maintains repeatable positioning to within that tolerance, supporting precise machining and consistent part interchangeability with the Vertex vice. Is the vice suitable for heavy machining? Yes; the cast iron construction combined with a 1,000 kgf clamping force and a mass of 36 kg make the vice appropriate for demanding metalworking tasks where stability is required. Can the vice be mounted on a rotary table or machine table? The vice’s Ø296×22 mm foot and compact dimensions support secure mounting to benches and machine tables; the optional swivel base adds orientation flexibility without re-clamping. What maintenance is required for the mechanical vice? Routine lubrication of the lead screw, periodic inspection of jaw faces and bolted fixings, and keeping sliding surfaces clean will preserve the vice’s performance and service life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Increase precision and safety with robust bench vices
Bench vices are the fundamental mechanical clamping tools in any workshop, production hall or assembly area. Their simple construction — a fixed jaw and a movable jaw driven by a threaded spindle — enables consistent, high clamping forces that keep workpieces rigid and slip‑free during filing, sawing, tapping, drilling or complex assembly tasks. This reliability reduces rework, shortens setup times and raises operator safety.
Technical data at a glance
- construction: fixed jaw + movable jaw, spindle‑driven clamping
- primary materials: forged steel, grey cast iron
- typical types: parallel bench vices, pipe vices with prism jaws, modular machine vices for CNC
- protective jaws: aluminium, polyurethane, rubber, copper (interchangeable)
- typical applications: filing, sawing, thread cutting, drilling, assembly, machining support
- key properties: high holding forces, vibration damping (cast iron versions), long service life
Practical advantages that speed up production
- faster, repeatable clamping for reduced setup and cycle times
- improved machining accuracy through rigid fixation and consistent alignment
- surface protection options to avoid scratches and dents on finished parts
- durable construction for continuous heavy use and low maintenance requirements
- compatibility with both manual bench work and machine mounting for flexible workflows
Metav as a smart precision partner
Metav democratises precision by making high‑quality measuring and workshop equipment accessible to every workshop. Backed by decades of know‑how and a central quality filter in Emmerich, Metav supplies a comprehensive range that complements bench vices and machine vices alike. The combined offering simplifies procurement, supports reliable stock supply and helps maintain consistent tool performance across production lines.
FAQ
What materials can bench vices handle?
Bench vices are suitable for metal, plastic and woodworking tasks; specific vice types and jaw materials determine suitability for softer or harder workpiece surfaces.
How do protective jaws work with vices?
Protective jaws are interchangeable inserts (aluminium, polyurethane, rubber, copper) that fit the vice jaws to protect delicate or finished surfaces during clamping.
Can machine vices replace bench vices for CNC work?
Machine vices, designed for mounting on machine tables, provide the precision and modularity required for CNC operations while bench vices remain ideal for manual and assembly tasks.
Which material is better: forged steel or grey cast iron?
Forged steel vices offer high toughness and impact resistance; grey cast iron vices provide superior vibration damping and dimensional stability for heavy bench or machine mounting.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com