600kg Floor Scale 1000×1000mm Steel Platform, 52mm LCD Display, IP67, Class III – KERN

KERN Analogue Module Technical Data: and Summary:Manufacturer: KERNSeries: KFBModel: Analog ModuleOrder now Analogue Module Online.

Detailed Information:Manufacturer: KERNSeries: BFSModel: Ascending rampAscending ramp quick and easy order Online!!

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Take advantage of a height‑adjustable elevation solution combining robust stainless‑steel construction and a massive three‑legged tripod for reliable stability and precise positioning. Order the KERN YKP‑02 directly via Metav Werkzeuge or ask our consultants for advice and delivery from Emmerich. KERN YKP-02 Tripod Stand — height‑adjustable 750–1000 mm, stainless steel The KERN YKP‑02 is a tripod stand designed to raise indicator and evaluator units for workshop and laboratory use, providing stable positioning and broad compatibility with multiple KERN scale series. Height-adjustable 750–1000 mm Robust stainless-steel tripod base Designed for indicator/evaluator units Compatible with multiple KERN series Stable elevation for precise readings A height-adjustable tripod removes guesswork from set‑up: the 750–1000 mm range permits accurate placement of the evaluation unit at the operator’s preferred working height, reducing posture changes and measurement variation. The massive three‑legged base delivers stability on uneven surfaces, which supports repeatable readings and protects sensitive load cells from unwanted lateral forces. This results in fewer rechecks and a smoother inspection workflow. Built for compatibility and workflow efficiency The stand is intended for mounting evaluation units and is compatible with a wide range of KERN series, simplifying procurement and reducing inventory complexity. Its universal mounting capability ensures the tripod integrates with existing weigh‑and‑measure equipment, enabling faster set‑up times and less downtime between jobs. The compatibility aspect therefore contributes directly to improved throughput and predictable production planning. Durable materials for long service life Constructed from stainless steel with a heavy‑duty tripod foot, the stand resists corrosion in workshop environments and sustains repeated handling without loss of function. Where painted steel components are supplied, the finish adds protection against abrasion. The material choice focuses on longevity and low maintenance, translating to reduced total cost of ownership over the product life cycle. Practical handling and application benefits With a net weight of 2.6 kg and a compact footprint, the tripod offers a practical balance between portability and robustness. The design supports simple vertical adjustment while keeping the mounted device secure; this simplifies calibration tasks and routine inspections. For users aiming for reliable positioning of displays and indicators, the stand enables stable visual alignment and safer working practices. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKP‑02 tripod into existing measurement setups and to arrange prompt delivery from our Emmerich warehouse. Technical data Article number: YKP-02 Manufacturer: KERN SKU: YKP-02 GTIN: 4045761184374 Origin: CN Facts Height range: 750–1000 mm Weight: 2.6 kg HS code (Tariff): 73269098 eCl@ss: 21170601 Special features Stainless steel with massive tripod base Height-adjustable Painted steel option / stainless finish For elevating indicator / evaluator units Compatible with BFB, BXS, BFS, BFA, BBB, BBN, BKN, IFS, IFB, KFE-TM, KXG-TM, KXS-TM, KEN-TM, NFB, NBB, SFE, UFA, UFB, UFC FAQ What is the adjustable height range of the tripod? The KERN YKP‑02 tripod offers a height range of 750–1000 mm, which allows precise positioning of evaluation units at ergonomic working heights. Which materials are used in the construction of the stand? The stand is supplied in stainless steel with a massive three‑legged base; painted steel versions are noted where applicable for increased surface protection. Is the tripod compatible with my KERN evaluation unit? Compatibility is wide: the KERN YKP‑02 is designed to fit numerous KERN series including BFB, BXS, BFS, BFA and others listed in the technical information, ensuring straightforward integration. How heavy is the tripod and what does that mean for handling? The KERN YKP‑02 weighs 2.6 kg, balancing ease of repositioning with sufficient mass for stable mounting in routine workshop and laboratory tasks. Can the stand improve measurement repeatability? Yes. By providing a stable, height‑adjustable support for the evaluation unit, the tripod reduces movement and misalignment, which helps improve repeatability of readings. Manufacturer: KERN; Origin: CN; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271

Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Take advantage of the 15 m special length and the secure link between indicator and platform for flexible scale installation; compatibility notes require checking models with optional calibration before purchase. Order the cable directly via Metav Werkzeuge or consult our specialists for application advice. BFB-A03 connection cable for scales by KERN — 15 m special length The BFB-A03 is a 15 m connection cable designed to link a scale indicator and its weighing platform, suitable for industrial and workshop weighing setups where extended separation is required 15 m special length for flexible layouts Designed for indicator-to-platform connection Not retrofit‑compatible on calibrated models Suitable for industrial weighing installations Flexible installation that keeps the workspace organised The extended 15 m run enables placing the weighing indicator at a convenient workstation while the platform remains in the process area, so measurement points and operator stations can be separated without resorting to makeshift extensions. This layout reduces clutter on the bench and minimises the need to reposition heavy platforms, delivering a more efficient workflow. The long reach also simplifies integration into existing production lines where direct proximity is impractical. Clear compatibility guidance to avoid costly errors Compatibility is decisive when selecting this accessory. The cable is intended specifically for connection between evaluation unit and platform and is not retrofit‑compatible on models with optional calibration, which means certain scale configurations require ordering the cable at the time of initial system specification. For installations where calibration options have been selected later, an alternative factory‑approved connection must be used. This transparency prevents downtime and supports a reliable measuring chain. Practical benefits for industrial weighing applications Beyond mere length, the design focuses on dependable signal transmission and straightforward installation in workshop and industrial contexts. The robust construction suits routine handling and fixed installations, helping to maintain consistent measurement performance. Combined with Metav Werkzeuge’s role as a quality filter for the European market, the accessory contributes to a predictable supply chain and dependable product selection for professionals seeking long‑term reliability. Contact Metav Werkzeuge in Emmerich for compatibility checks and to secure the KERN BFB-A03 15 m connection cable — expert advice and prompt dispatch available from our warehouse to your workbench Technical data Article number: BFB-A03 Manufacturer: KERN GTIN: 4045761161788 Country of origin: China Core data Cable length: 15 m Weight: 3.5 kg Tariff code: 84239010 eCl@ss: 21131814 Special features Function: connection between indicator and platform Note: not retrofit-compatible for models with optional calibration Product group: scales accessories Category path: Scales › Accessories FAQ Is this cable suitable for remote mounting of the indicator? The BFB-A03 cable by KERN is intended precisely for remote mounting, enabling the indicator to be positioned up to 15 m from the platform for ergonomic or process-driven installations. Can the cable be fitted afterwards if calibration was added later? No, the cable is not retrofit‑compatible on models that use an optional calibration package; the BFB-A03 must be confirmed as suitable for the specific scale configuration before procurement. Which devices is the BFB-A03 compatible with? Compatibility depends on the scale model and its factory options; the BFB-A03 is a connection cable for indicator-to-platform links on compatible KERN weighing systems. Where does this cable ship from and who supplies it? The KERN BFB-A03 is supplied via Metav Werkzeuge’s stock in Emmerich, with logistics set up for reliable delivery to industrial and workshop customers. Manufacturer: KERN — Origin: China

KERN Pair of base plates für BFB, Overview and Technical Data:Manufacturer: KERNSeries: BFSModel: Pair of base platesOrder now Pair of base plates Online.

Additional Information and Technical Data for KERN Stable pit frame :Manufacturer: KERNSeries: BFSModel: Stable pit frame für BFBMaterial: Stahl, lackiertAblesbarkeit:Setting standard:Ideal for: Modelle mit Wägenplattengröße 1000x1000x85mm or Modelle mit Wägenplattengröße 1500x1500x85mm depending on the modelOrder now Stable pit frame Online.

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930