30 kg Precision Counting System High Resolution 0.01 kg/0.02 kg, IP65, Three-Display RS-232 - KERN

Take advantage of a corrosion-resistant stainless-steel stand with an approximate height of 330 mm that elevates the display for improved ergonomics and reliable reading. Paired with compatibility for KERN IFB and KERN IFS platform scales, this stable and lightweight support ensures consistent weighing workflows. Order through Metav Werkzeuge or contact our consultants for specification advice. IFB-A01 stainless-steel stand — 330 mm height for KERN platform scales The IFB-A01 is a dedicated stainless-steel stand designed to raise and stabilise KERN platform-scale display units, creating a clearer line of sight and a more ergonomic working position for production and QC environments. Stainless-steel construction Approx. 330 mm stand height Compatible with KERN IFB and IFS scales Better ergonomics and fewer reading errors through elevated displays Raising the indicator reduces operator strain and shortens process cycles by making the weight display easier to read at a glance. The stainless steel construction resists workshop contaminants and is compatible with routine cleaning, while the 330 mm elevation creates a consistent viewing angle that supports repeatable tare and zeroing procedures. This measured adjustment helps to decrease transcription errors and supports a more efficient weighing routine in the production environment. Robust design for daily workshop use Made from stainless steel, the stand provides a corrosion-resistant surface that endures humid or oily conditions commonly found in industrial settings. With a compact footprint and a mass of 1.17 kg, the support combines portability with structural rigidity. The lightweight nature makes repositioning straightforward, while the material choice ensures long-term durability and low maintenance, preserving the integrity of the weighing station and extending service intervals. Simple integration with existing platform scales Engineered for direct compatibility with KERN IFB and KERN IFS platform scales, the stand facilitates secure attachment of the indicator head without the need for bespoke adapters. The stable support promotes reliable alignment of the display relative to the scale platform, reducing parallax and improving measurement accuracy. This plug-and-play approach minimises downtime during installation and supports continuity across multiple weighing stations. Practical benefits for quality control and production A consistent display height contributes to standardised operating procedures, aiding traceability and audit-readiness in industrial metrology tasks. The stand’s stainless-steel build supports hygienic cleaning regimes and offers a professional appearance on the workshop bench. By stabilising the indicator and reducing manual adjustments, the accessory helps maintain reproducible results and can be a simple yet effective improvement to daily weighing workflows. Contact Metav Werkzeuge for availability and technical guidance on the IFB-A01 stainless-steel stand; expert advice and shipment from Emmerich are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: IFB-A01 Manufacturer: KERN GTIN: 4045761112193 Material: stainless steel Weight: 1.17 kg Country of origin: CN Tariff code: 73269098 ECLASS: 21170601 Facts Stand height: approx. 330 mm Weight: 1.17 kg GTIN: 4045761112193 Tariff code: 73269098 ECLASS: 21170601 Special features Compatible with KERN IFB and KERN IFS platform scales Corrosion-resistant stainless-steel construction Compact footprint for bench or floor mounting FAQ Is the stand compatible with other KERN modules or only the IFB/IFS series? The stand is specified for use with KERN IFB and KERN IFS platform scales; other models are not listed in the technical data. How does the stainless-steel material benefit workshop use? Stainless steel offers corrosion resistance and easy cleaning, supporting hygienic conditions and long-term durability of the stand in industrial environments. What is the exact height of the stand and how does that affect ergonomics? The support provides an approximate height of 330 mm, which raises the indicator to a more ergonomic viewing level, reducing operator strain and improving reading consistency. Is the stand easy to move between workstations? At 1.17 kg, the support combines stable construction with manageable weight for repositioning when required. Manufacturer: KERN · Origin: CN · Address: not provided · Contact: not provided

Take advantage of a tailored protection solution that combines simple handling, compatibility with KERN precision scales and a practical 5-piece set for immediate replacement. Improve instrument uptime and limit contamination-related errors — order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. Protective cover EWJ-A04S05 — Protective cover for precision scale, compatible with KERN The Protective cover EWJ-A04S05 is designed to shield sensitive weighing instruments from dust and contamination, suitable for laboratory benches and workshop quality-control stations. Protective cover for KERN EWJ precision scale Supplied as 5-piece set Lightweight at approx. 0.02 kg each Reliable protection that preserves measurement quality A durable protective cover reduces the risk of dirt, spills and particulate ingress that can affect load cells and delicate weighing electronics. By preventing contamination, the cover helps to maintain repeatable readings and reduces the frequency of calibration or service interventions. The specified compatibility with KERN EWJ-series devices ensures a precise fit, which is essential for preserving the factory-set tolerances of a precision scale and avoiding measurement drift. A practical set to keep processes running Supplying the cover as a 5-piece set supports uninterrupted workflows: one cover can remain in use while spares are immediately available for replacement after cleaning or accidental damage. For industrial and workshop environments where sampling and frequent handling occur, having ready spares reduces downtime and simplifies inventory management. This approach targets efficiency and cost-effectiveness by lowering the likelihood of production halts due to unprotected instruments. Lightweight handling that improves daily workflow At approximately 0.02 kg per cover, the hood is easy to fit and remove, making routine maintenance and cleaning straightforward even in busy metrology stations. The compact design supports space-efficient storage on a service trolley or in a calibration kit. Easy handling translates into faster changeover times during shift changes and a lower labour burden for routine housekeeping around precision equipment. Contact Metav Werkzeuge today to secure the KERN protective cover EWJ-A04S05 set — our Emmerich-based team will advise on compatibility and delivery to keep measurement operations reliable Technical data Article number: EWJ-A04S05 SKU: EWJ-A04S05 GTIN: 4045761185401 Manufacturer: KERN Country of origin: CN Data Weight: 0.02 kg Tariff code: 39269097 eClass: 24322502 Special features Compatibility: fits KERN EWJ precision scale Scope of delivery: 5 pieces Category: scale accessories Fast dispatch — available through Metav Werkzeuge FAQ Is this cover compatible with KERN EWJ scales? Yes. The protective cover EWJ-A04S05 is specified for use with KERN EWJ precision scales and provides a fitted shield for typical EWJ models. What does the set include? The delivery comprises a 5-piece set of protective covers (EWJ-A04S05), enabling immediate replacements and spares for workshop use. How does the cover protect the scale? The cover shields the weighing area from dust and light contamination, helping to preserve load-cell performance and reduce cleaning-related downtime for KERN precision scales. Is the cover suitable for laboratory and workshop environments? Yes. The lightweight design and exact fit make the cover appropriate for benches in laboratories and production quality-control stations where frequent handling occurs. Manufacturer: KERN — Made in China; For enquiries contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271

Kern roller modules combine robust construction with quick integration for smoother conveyor weighing. Benefit from a lightweight aluminium profile frame and conductive, ball-bearing rollers that reduce handling time and maintain measurement reliability. Order the roller conveyor attachment directly via Metav Werkzeuge or request a tailored configuration from our specialists. KERN YRO-01 roller conveyor attachment — aluminium profile frame, ball-bearing rollers The KERN YRO-01 roller conveyor attachment converts a platform scale into a fast, flexible weighing station for production and dispatch lines, suitable for integration with standard KERN platform scales. Converts platform scale into weighing station Modular aluminium profile frame for easy cleaning Hot-dip galvanised ball-bearing steel rollers Conductive rollers for static management in dry areas Faster weighing where throughput matters Integrating a dedicated roller conveyor attachment with an existing platform scale transforms intermittent weighing into a continuous, productive step in the workflow. The modular roller module allows goods to be weighed while moving or at fixed stops, which shortens handling cycles and improves line throughput. Compatibility with established KERN platform models (e.g. IFB, IFS, KFP, KXP, SXS) enables direct retrofitting, reducing installation complexity and keeping commissioning time minimal. The result is an immediate efficiency gain and more consistent process timing across production and shipping stations. Robust build that simplifies maintenance A lightweight aluminium profile frame provides structural rigidity without unnecessary bulk, while the modular construction allows individual parts to be removed for cleaning or replacement. The rollers are hot-dip galvanised, ball-bearing steel, offering low rolling resistance and long service life under repeated use. This combination reduces maintenance intervals and downtimes versus ad hoc conveyor attachments, preserving the operational reliability of connected scales and conveyors. The design supports straightforward servicing and component swaps, which is particularly valuable in high-throughput environments. Consistent handling and safe operation The roller set uses conductive rollers and a compact roller spacing of approximately 30 mm, promoting steady transit and preventing product hang-ups on the module. Designed for longitudinal running direction and for use in dry environments, the system helps manage electrostatic effects while ensuring predictable movement across the weighing surface. Supplied as a single conveyor attachment (without scale), the module keeps the weighing interaction transparent: goods are positioned, weighed and forwarded with minimal manual intervention, reducing handling errors and process variability. Simple retrofitting and configurable performance The attachment is supplied to be plugged directly onto compatible platform bases, so the mechanical fit is immediate and intuitive. Its modular architecture supports customised adjustments such as preload and switching tolerance settings to suit specific production requirements, enabling the attachment to be tuned to conveyor speeds and goods characteristics. Assistance with configuration and individual adaptation is available for tailored setups. As a compact accessory, the unit preserves the primary weighing characteristics of the connected scale while delivering the conveyor functionality needed in fast-paced processing lines. For tailored configuration and prompt supply of the KERN YRO-01 roller conveyor attachment, contact Metav Werkzeuge — supply from Emmerich with expert advice and rapid processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: YRO-01 Manufacturer: KERN GTIN: 4045761190276 Facts Dimensions: 405 x 305 x 130 mm Weight: 6 kg ECLASS: 36120407 Special features Aluminium profile frame Hot-dip galvanised, ball-bearing steel rollers Conductive rollers Roller spacing approx. 30 mm Longitudinal running direction Suitable for dry environments Delivered as 1 roller conveyor attachment (without scale) Compatible with KERN IFB, IFS, KFP, KXP, SXS platform scales Country of origin: DE Tariff number: 84239010 FAQ Can the roller conveyor attachment be used with existing KERN platform scales? The KERN YRO-01 roller conveyor attachment is designed for direct fit on several KERN platform models such as IFB, IFS, KFP, KXP and SXS, enabling fast retrofitting without major mechanical changes. What maintenance is required for the rollers and frame? The modular aluminium profile frame and hot-dip galvanised, ball-bearing rollers on the KERN YRO-01 permit easy disassembly for cleaning or replacement, reducing maintenance time compared with non-modular solutions. Is the attachment suitable for environments with moisture or liquids? The KERN YRO-01 is specified for use in dry environments; the conductive rollers and materials are selected to manage static and ensure consistent operation under those conditions. Does the module affect weighing accuracy of the connected scale? When fitted correctly on compatible platform bases, the roller conveyor attachment maintains the weighing function of the connected scale while enabling goods to be moved on and off the weighing surface with consistent handling characteristics. What is included in the delivery? Delivery comprises one roller conveyor attachment (without scale), supplied as a modular unit ready for mechanical mounting to compatible KERN platform scales. Manufacturer: KERN; Address: Germany; Contact: via Metav Werkzeuge — info@metav-werkzeuge.com, +49 2822 7131930

Reliable RS-232 connectivity, Y-split capability and a compact 0.1 kg design deliver straightforward integration into weighing setups; order the KERN CCA-A01 directly via Metav Werkzeuge or consult our specialists for detailed application advice. Y-cable RS-232 CCA-A01 — KERN Y-split interface for scales The Y-cable RS-232 CCA-A01 is a compact RS-232 Y-split interface designed to link weighing instruments with multiple peripherals in industrial and workshop environments. RS-232 Y-split for parallel connections Includes interface cable for scales Compact design, weight 0.1 kg Seamless, reliable data transfer for efficient workflows The cable provides a straightforward solution for serial communication in weighing applications by using the established RS-232 protocol. As an accessory intended for balances and scales, the Y-split arrangement allows one serial output to be duplicated to two inputs where device implementations permit, helping to maintain traceable data records without repeated manual transcription. The low mass and simple form factor make mounting and routing within cabinets or on benches uncomplicated, supporting uninterrupted process flows and reducing handling time. Simple integration with existing weighing equipment Designed as an accessory in the scales category, this interface cable supports fast installation and tidy cable management in production and laboratory environments. The compact construction aids compatibility with crowded instrument panels and helps to keep data lines short and well routed, which supports signal integrity. Where system documentation is available, the KERN label and the SKU make procurement and inventory management easier for purchasing departments and stores of spare parts, promoting efficient stocking and rapid replacement when needed. Supports quality assurance and operational continuity By enabling parallel connections, the cable assists in linking a weighing instrument simultaneously to recording devices, printers or data acquisition systems, which strengthens measurement traceability and audit capability. The accessory’s design focus on function and simplicity contributes to operational uptime and consistent data capture, aligning with the demands of industrial workflows that require dependable interfaces. The compact footprint and light weight further reduce the risk of strain on connectors and fixtures, making the cable a practical component in long-term measurement setups. Contact Metav Werkzeuge today to discuss the KERN CCA-A01 RS-232 Y-cable and secure the right interface solution for your weighing processes — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and fast supply. Technical data Article number: CCA-A01 Manufacturer: KERN Origin: CN Facts Weight: 0.1 kg ECLASS: 19050111 Tariff number: 84239010 Special features Interface: RS-232 Y-split Category: Scales accessories Includes interface cable FAQ What does a Y-split RS-232 cable do? A Y-split RS-232 cable duplicates the serial signal so a single RS-232 output can be connected to two compatible inputs; the KERN CCA-A01 is intended for such parallel connections in weighing setups. Is the KERN CCA-A01 suitable for industrial balances? The CCA-A01 is produced by KERN as a scales accessory and is suitable where the balance and peripherals implement standard RS-232 signalling; compatibility should be checked against device manuals. Will the cable affect measurement accuracy? The cable itself does not change weight measurement results; using the KERN CCA-A01 simply enables simultaneous data transfer to recording or printing devices, supporting traceability without altering the instrument’s readings. How compact is the interface for panel routing? With a light design and small footprint, the cable is intended for tidy routing on benches and in instrument cabinets, helping to maintain signal integrity and neat installations. KERN — Country of origin: CN

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271