1500kg Counting System With 0.5kg Readability, LCD Display, IP67 Single-Point Load Cell - KERN

Benefit from a stainless-steel, hygienic design combined with low weight and straightforward handling for fast, reliable weighing of loose goods; order the tare pan directly via Metav Werkzeuge or ask our consultants if needed. KERN Tare Pan RFS-A02 — stainless-steel weighing tray for loose items KERN Tare Pan RFS-A02 provides a purpose-built stainless-steel surface for quick, hygienic weighing of loose small parts, fruit and vegetables with compatible bench and laboratory scales. Stainless-steel construction, easy to clean Lightweight and easy handling Designed for loose small parts and produce Accessory for KERN scales and similar systems Faster, more reliable weighing for daily workflows The stainless-steel tray is designed to support efficient weighing tasks in production, retail and workshop environments. Thanks to its hygienic surface and smooth geometry, routine cleaning is quick, reducing machine downtime and maintaining consistent results. The material choice also contributes to weighing accuracy by preventing contamination and reducing offsets that arise from trapped debris. This results in a predictable tare behaviour and fewer repeat measurements, improving throughput on busy benches. Practical handling and compatibility with scale systems This accessory is optimised for integration with bench and counting scales, offering a simple way to extend existing weighing equipment for bulk or loose items. The lightweight construction eases placement and removal, while the shallow profile supports even distribution of small components for stable readings. For workshops and retail counters where speed and repeatability matter, the tray streamlines processes and supports consistent inventory recording. Low-maintenance hygiene for food and small-parts environments Constructed for straightforward maintenance, the tray’s stainless-steel surface is easy to clean and resistant to staining, which is especially beneficial when handling foodstuffs or dusty small parts. The material minimises bacterial harbourage when cleaned correctly and reduces the need for intensive maintenance regimes. Visual inspection is fast, and routine wiping keeps the weighing environment compliant with basic hygiene expectations without specialised tools. For procurement, compatibility checks or technical advice on the KERN tare pan RFS-A02, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — phone and WhatsApp support available for quick consultation Technical Data Article number: RFS-ACC SKU: RFS-A02 Manufacturer: KERN GTIN: 4045761113787 Net weight: 0.57 kg Origin: CN Customs tariff number: 84239010 eClass: 32040606 Facts Net weight 0.57 kg GTIN 4045761113787 Customs tariff 84239010 eClass 32040606 Special features Stainless-steel tray, easy and hygienic to clean Ideal for weighing loose small parts, fruit, vegetables Accessory for scales, product category: weighing accessories FAQ Is the tray suitable for food use? The stainless-steel surface of the KERN tare pan RFS-A02 is described as easy to clean and hygienic, making it suitable for weighing fruit and vegetables under routine cleaning regimes. Which scales is the tray compatible with? The tray is an accessory for bench and counting scales; it is supplied as the tare pan RFS-A02 for KERN systems and can be used with similar platforms that accept removable trays. How should the tray be cleaned to maintain accuracy? Routine wiping with a mild detergent and drying is recommended to keep the weighing surface free of residues that could affect tare values; the KERN tray’s stainless-steel finish supports straightforward maintenance. What is the net weight of the tray and does it affect scale selection? The tare pan has a net weight of 0.57 kg; this should be considered when selecting a scale with an appropriate capacity and resolution for your weighing tasks. KERN — Manufacturer country: CN

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Benefit from a robust painted-steel ramp that ensures safe, repeatable access to larger industrial scales and delivers reliable workshop performance; the compact footprint minimises floor space while matching standard 1500 × 1250 mm weighing plates. Order the KERN loading ramp via Metav Werkzeuge or consult our specialists for compatibility advice. BFS-A02N loading ramp by KERN — painted steel, fits 1500 × 1250 mm weighing plates The BFS-A02N is a painted-steel loading ramp engineered to provide secure access to industrial weighing platforms, optimised for use with scales that have a 1500 × 1250 mm weighing plate. Painted steel construction, durable finish Designed for 1500 × 1250 mm weighing plates Compact footprint: 1250 × 740 × 90 mm Stable 57 kg construction for workshop use Improve workflow with safe, dependable scale access A purpose-built weighing ramp reduces handling time and minimises the risk associated with lifting heavy loads onto a scale. The ramp’s painted steel structure provides a resilient surface for daily workshop use, contributing to uninterrupted process flow and fewer stoppages. By enabling straightforward roll-on or push-on access to a scale, the device enhances operational efficiency and helps maintain precise weighing procedures, which in turn supports reproducible measurement results and consistent quality control. Built for industrial durability and practical installation Constructed from painted steel, the ramp combines durability with low maintenance requirements. The solid build offers a stable approach to the weighing platform while weighing in at 57 kg, ensuring the ramp stays securely in place during loading. The design focuses on robustness and longevity, which reduces the frequency of replacements and maintenance interventions. Installation is deliberately simple; the ramp is intended to align with standard workshop scales and integrate with existing setups without specialised tools. Compatibility that supports exact weighing processes This loading ramp is tailored for scales with a 1500 × 1250 mm weighing plate, providing a precise match that prevents alignment issues and ensures safe transfer of pallets and trolleys. The measured interface between ramp and platform reduces measurement errors caused by uneven loading and supports reliable use across repetitive weighing tasks. Clear specification of intended compatibility helps procurement and engineering teams plan installations confidently and avoid mismatched components. For a secure and compatible scale solution, order the KERN BFS-A02N ramp from Metav Werkzeuge—available from our Emmerich stock; contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for specification support Technical data Article number: BFS-A02N Manufacturer: KERN GTIN: 4045761180031 Material: Steel, painted Net weight: 57 kg Country of origin: CN Tariff number: 73269098 Numbers / Core technical data Suitable for weighing plate size: 1500 × 1250 mm Weight: 57 kg Special features / Versions Painted-steel construction Designed for workshop and industrial scales Compact approach profile for roll-on access FAQ Is the ramp compatible with my 1500 × 1250 mm scale? The ramp is designed for scales with a 1500 × 1250 mm weighing plate; the BFS-A02N provides a matching approach for safe loading and accurate weighing. What material is the ramp made from and how durable is it? The loading ramp is made from painted steel, offering a durable finish suitable for industrial workshop conditions and routine handling. How heavy is the ramp and does it require fixing to the floor? The ramp weighs 57 kg, giving it a stable presence during use; whether floor fixing is required depends on the specific installation and local safety rules. Can the ramp be used with pallet trucks and trolleys? Yes: the ramp’s design supports roll-on access for pallet trucks and trolleys when used with compatible weighing platforms such as those sized 1500 × 1250 mm. Who supplies this ramp and how can I get technical advice? The ramp is supplied by KERN and distributed through Metav Werkzeuge; for technical advice refer to Metav’s consultants via info@metav-werkzeuge.com or +49 2822 7131930. Manufacturer: KERN • Seller: Metav Werkzeuge, Emmerich am Rhein • Contact: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271

Take advantage of a robust, flush-mounted solution that supports barrier-free drive-on access while keeping installation predictable and maintenance straightforward; order the KERN pit frame directly via Metav Werkzeuge or consult our technical advisors for specification checks. KERN BFS-A04N Pit Frame – stable flush-mounted frame, 1335×1585×80 mm The BFS-A04N pit frame is a stable installation frame for a weighing bridge, designed to enable barrier-free drive-on access in industrial and workshop environments. Stable flush-mounted design for weighing bridges Dimensions: 1335×1585×80 mm Compatible with weighing plate size 1500×1250×80 mm Not suitable for retrofitting Improved workflow through flush installation and stability A flush-mounted pit frame delivers a tangible operational advantage by removing raised edges and enabling level, barrier-free drive-on for pallet trucks and trolleys. The robust construction of this frame reduces lateral movement during entry and exit, which supports consistent weighing results and speeds up loading cycles. The flush-mounted configuration also minimises tripping hazards and eases daily handling for personnel, contributing to a safer and more efficient production area. Clear compatibility and predictable installation Engineered for use with weighing bridges that match the specified plate dimensions, the frame ensures a precise fit and predictable alignment with the platform. The BFS-A04N from KERN is specified for a weighing plate size of 1500×1250×80 mm and provides installers with defined parameters, reducing the time spent on site planning and modification. The documented dimensions (1335×1585×80 mm) and the unit weight of 33 kg simplify logistics planning and handling during installation. Practical benefits for operations and procurement Choosing a purpose-built pit frame reduces the need for custom fabrication and supports rapid integration into existing workshop layouts. The fixed, non-retrofittable design eliminates ambiguity about suitability for older platforms, so engineering teams can make a clear procurement decision and avoid compatibility issues later. As an accessory within the weighing system category, this frame complements precision scales by maintaining stable platform behaviour and protecting the load cells from lateral stress during drive-on operation. For tailored advice or to order the KERN BFS-A04N pit frame, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will verify fit and delivery options for your application. Technical Data Article number: BFS-A04N GTIN: 4045761180055 Manufacturer: KERN Country of origin: CN Weight: 33 kg Facts Dimensions (B×T×H): 1335×1585×80 mm Suitable weighing plate size: 1500×1250×80 mm Special features Stable pit frame for flush installation Enables barrier-free drive-on for weighing bridges Not retrofittable Product group: Grubenrahmen (pit frame), Zubehör (accessory) FAQ What operational advantage does a pit frame provide? A flush-mounted pit frame creates level access for trolleys and forklifts, enabling safer, faster loading and more consistent weighing when used with a compatible weighing bridge. Which platforms are compatible with this frame? The frame is designed for weighing plates sized 1500×1250×80 mm; the KERN BFS-A04N specifies the dimensional match to ensure correct alignment with the weighing bridge. Can the frame be fitted to existing installations? The product is specified as not retrofittable, so it is intended for planned installations rather than aftermarket adaptation. What are the overall dimensions and handling weight? Dimensions are 1335×1585×80 mm and the unit weight is 33 kg, which assists in transport and installation planning. Where is the pit frame manufactured? The KERN pit frame is manufactured in China (CN). KERN

Stable anchoring for precise weighing: the accessory secures the weighing bridge to the floor, compatible with common bridge plate footprints and designed for rapid installation; order the pair of base plates directly via Metav Werkzeuge or consult our specialists for application advice. Pair of base plates for BFB — floor anchor for weighing bridge, KERN Pair of base plates for stable fixation of a weighing bridge in industrial and workshop environments Pair of base plates for floor anchoring Compatible with plate sizes up to 1500x1500x85mm Quick fixation of weighing bridge to floor Lightweight design, total weight 0.74 kg Secure foundation for repeatable weighing results A reliable weighing process depends on mechanical stability. The pair of base plates provides a defined interface between the scale and the floor, reducing micro-movements that can cause measurement scatter. Designed for use with stationary platforms, the accessory improves repeatability by stabilising the load path of the weighing bridge. Compatibility with footprints from 1000×1000×85 mm up to 1500×1500×85 mm ensures the anchoring solution matches common industrial bridge sizes, helping to maintain consistent results across shifts and operators. Fast fitting that minimises downtime Installation is straightforward and engineered for workshop efficiency. The base-plate pair (BFS-A06N) features a compact form and lightweight total mass (0.74 kg), allowing quicker positioning and bolting with standard toolsets. Because the plates are intended solely for mechanical fixation, they do not alter the metrological behaviour of the scale and so support existing calibration intervals. The result is reduced installation time, minimal production interruption and straightforward retrofitting into established weighing set-ups. Integrates with professional procurement and operations Supplied as an accessory for KERN systems, these mounting plates fit into an organised spare-part strategy and simplify inventory management for maintenance teams. Availability through Metav supports reliable supply from a European stock point, reducing lead times and smoothing workshop logistics. Where consistent throughput and predictable maintenance are priorities, the plates serve as a small but effective component of a controlled weighing workflow. For direct procurement or technical clarification on the KERN BFS-A06N pair of base plates contact Metav Werkzeuge—order via Metav or request tailored advice from our Emmerich-based team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BFS-A06N Manufacturer: KERN GTIN: 4045761180062 Country of origin: CN Facts Weight: 0.74 kg Suitable for plate sizes: 1000×1000×85 mm, 1500×1250×85 mm, 1500×1500×85 mm ECLASS: 21130190 Tariff code: 84239010 Special features Application: Fixation of weighing bridge to floor Compatible with BFB systems Matching accessory for KERN weighing bridges Packaged for workshop logistics FAQ What is the primary function of the pair of base plates? The pair of base plates (BFS-A06N) secures the weighing bridge to the floor, providing a defined mechanical interface that reduces movement and improves repeatability. Which bridge sizes are compatible with these base plates? Compatibility covers bridge plate footprints of 1000×1000×85 mm, 1500×1250×85 mm and 1500×1500×85 mm as specified for the accessory. What is the weight of the KERN BFS-A06N accessory? The total weight for the base-plate pair is 0.74 kg. Is the material specified for the base plates? Material details are not specified in the product data; refer to the KERN product documentation for construction specifics if required. Where is this accessory manufactured? The KERN base-plate pair BFS-A06N is listed with country of origin CN (China). KERN, Country of origin: CN

Take advantage of straightforward scale protection with a lightweight, compatible cover that reduces downtime and simplifies replacements; supplied as a five-piece set for immediate stock rotation. Order the protective hoods directly via Metav Werkzeuge or consult our advisors for application guidance. Protective Hood CFS-A02S05 — protective cover for KERN scales, compatible with GAB, CPB, CFS and CCS The Protective Hood CFS-A02S05 serves as a dedicated protective cover for scale modules from the GAB, CPB, CFS and CCS series, intended for workshop and laboratory weighing environments. Compatible with GAB, CPB, CFS and CCS scales Supplied as a five-piece set Lightweight: 0.04 kg each Rapid replacement reduces measurement downtime Preserve weighing accuracy with reliable protection The primary role of this cover is to provide consistent protection for weighing equipment, helping to maintain measurement integrity in routine operations. By shielding sensitive components from dust, light contamination and incidental contact, the hood contributes to stable readings and reduces the frequency of cleaning or sensor recalibration. The design emphasises unobtrusive coverage so that workflows remain uninterrupted while the instrument stays protected. Minimise downtime through easy replacement and storage Supplied as a compact set, the covers enable quick swaps during shift changes or maintenance intervals. The lightweight construction (0.04 kg per unit) means little storage impact and effortless handling when replacing worn or soiled covers. For busy facilities that require continuous operation, keeping a ready set on hand reduces stoppages and supports predictable production cycles, delivering a practical benefit for workshop managers and quality teams. Ensure fit and stocking efficiency for multiple scale series Compatibility across the GAB, CPB, CFS and CCS series simplifies procurement and inventory control: a single SKU covers several instrument types. This cross-series fit supports centralised stocking strategies and lowers the number of product variants to manage. The hood set is therefore a convenient accessory for service departments and procurement teams aiming to streamline spare-part lists while ensuring ready availability of protective equipment. Choose KERN protective hoods from Metav Werkzeuge for dependable scale protection and simplified spare-part management — contact Metav Werkzeuge in Emmerich for tailored advice or to place your order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CFS SKU: CFS-A02S05 Manufacturer: KERN GTIN: 4045761184510 Weight: 0.04 kg Country of origin: CN ECLASS: 24322502 Tariff number: 39269097 Facts Product group: Work protection hoods for scales Scope of delivery: 5 pieces Category path: Waagen › Zubehör Special features Compatible with GAB, CPB, CFS and CCS series Lightweight design for quick handling Intended for workshop and laboratory use FAQ What scale models are compatible with this protective hood? The protective hood CFS-A02S05 is designed to fit scales from the GAB, CPB, CFS and CCS series and provides standard protective coverage for these models. How is the product supplied and what is included? Delivery includes a five-piece set of protective hoods; the CFS-A02S05 set allows immediate replacement cycles and spare-part stocking. Does the hood affect measurement accuracy when installed? When correctly positioned, the hood preserves the scale’s intended measurement function; the CFS-A02S05 is designed to protect without interfering with weighing operations. KERN · Country of origin: CN · No direct manufacturer contact provided

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473