25mm Carbide Rod Cutter Floor Model, Manual Z-Feed, 3 HP, 2800 rpm, 50L Coolant Recirculation, CE Compliant - Chennai Metco

The combination of a 3 HP (2.2 kW) cutting motor, a cutting range of 3–25 mm, and a 50-litre recirculating coolant with 100 µm filtration ensures high throughput and long service intervals; benefit from consistent rod preparation and reduced downtime. Order the BAINCUT – CMC Medium directly via Metav Werkzeuge or ask our consultants for application advice.

BAINCUT – CMC Medium floor-model carbide and HSS rod cutter with 3 HP drive and 3–25 mm capacity

The BAINCUT – CMC Medium is a robust floor-mounted cutter designed for accurate trimming of carbide and HSS rods in production and toolroom environments.

• Carbide & HSS rod cutting 3–25 mm
• 3 HP motor, 2.2 kW and 2800 rpm spindle
• 50 L recirculating coolant with 100 µm filter
• Pneumatic v‑block clamping with brass insert

Productivity that keeps production moving

Equipped with a 3 HP (2.2 kW) cutting motor and a 2800 rpm spindle, this cutter delivers steady power for repeatable cuts across a 3–25 mm diameter range. The use of an 8" or 10" diamond wheel provides durable cutting performance for both carbide and HSS rod, reducing wheel change frequency. The durable, corrosion-resistant cutting chamber and rust-proof FRP door system are designed to withstand daily production demands, which supports continuous operation and lowers the total cost of ownership through fewer interruptions.

Cooling strategy that protects tools and material

Two high-flow coolant circuits supply the cutting zone while two dedicated jets cool the cut-off wheel, preventing thermal damage and improving surface finish quality. An inbuilt movable recirculation tank (50 litres) with a 100 µm filter bag and a 0.18 kW recirculation pump reduces coolant consumption and simplifies maintenance. The large drain and manual wash attachment assist fast cleaning, meaning less machine downtime and consistent cutting conditions over extended runs.

Accurate clamping and repeatable lengths for fewer rejects

Work-holding is addressed with a V-block featuring a brass insert, pneumatic clamping and an adjustable pressure system, giving secure grip for small-diameter rods without deformation. The manual adjustable measurement stopper enables precise length settings from 0 mm up to 300 mm, supporting repeatable production batches and minimising rework. Together, these features improve first-pass yield and ensure component consistency across series.

Intuitive operation and compliant safety for confident use

An advanced control system with an intuitive user interface simplifies set-up and shortens operator learning time, while the manual Z‑movement handle gives direct control over cut execution. The machine includes a splash-proof, corrosion-resistant see-through hood for safe observation, a powerful LED work light and CE-aligned safety systems to meet workshop standards. Note that an air supply of minimum 5 bar is required for pneumatic clamping. Voltage is standard 415 V / 50 Hz with an optional 220 V / 60 Hz configuration for alternative installations.

Contact Metav Werkzeuge today for precise specification matching and to discuss how the Chennai Metco BAINCUT – CMC Medium can be integrated into existing workflows; call +49 2822 7131930 or email info@metav-werkzeuge.com

Technical data

• Article number: CMCM028
• Model: BAINCUT – CMC Medium
• Manufacturer: Chennai Metco
• SKU: CMCM028
• Weight: approx. 220 kg
• Machine size (L x D x H): 800 mm x 850 mm x 1400 mm

Facts

• Cutting capacity: 3 mm to 25 mm diameter
• Motor power: 3 HP (2.2 kW), 3 phase
• Spindle speed: 2800 rpm
• Spindle diameter: 31.75 mm (25.4 mm optional)
• Diamond wheel diameter: 200 mm (8") or 250 mm (10")
• Coolant tank capacity: 50 litres
• Coolant pump: 0.18 kW
• Adjustable stopper range: 0–300 mm
• Required air supply: minimum 5 bar
• Voltage: 415 V / 50 Hz (optional 220 V / 60 Hz)

Special features

• Floor-model cutter for carbide and HSS rods
• Corrosion-resistant cutting chamber
• Rust-proof FRP door system
• Splash-proof, see-through hood
• Work-holding V-block with brass insert
• Pneumatic clamping with adjustable pressure
• Two high-flow coolant circuits and two wheel jets
• 100 µm filter bag facility
• Manual wash cleaning attachment with hanging hook
• Easy Flow special floor coating
• Powerful LED illumination
• CE-compliant safety systems

FAQ

What rods can be processed with this cutter? The Chennai Metco BAINCUT – CMC Medium is designed to cut carbide and HSS rods within a 3–25 mm diameter range and provides stable performance for both materials.

Is a compressed air supply required? Yes, pneumatic clamping requires an air connection with a minimum of 5 bar to operate the clamping and pressure adjustment systems reliably.

How does the coolant system reduce maintenance? The integrated 50-litre recirculation tank with a 100 µm filter bag and a dedicated pump recirculates coolant while trapping chips and debris, reducing coolant changes and simplifying upkeep for the BAINCUT – CMC Medium.

Can the machine be adapted for different supply voltages? The standard configuration is 415 V / 50 Hz, and an optional 220 V / 60 Hz three-phase supply (R+Y+B+PE) is available for installations with different electrical standards.

What guarantees consistent cut lengths in batch production? A manual adjustable measurement stopper covering 0–300 mm, together with pneumatic V‑block clamping and an adjustable pressure system, ensures repeatable lengths and reduces variation across batches.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com