Precision collets for repeatable, high-speed clamping
Precision collets and collet chucks provide concentric, damage-free clamping of cylindrical tools and bar stock, ensuring outstanding runout and vibration control for modern CNC milling and turning. Designed from spring steel, these collets use radial elasticity to deliver 360-degree gripping force, which prevents shaft marks and enables vibration‑reduced high‑speed machining while shortening setup times. As a fundamental component in metalworking, collets excel in both toolholding and workholding applications, offering flexibility across ER‑style systems and pull‑type work collets. Key benefits include excellent concentricity, robust holding power and suitability for high‑precision serial production.
NT40 Morse Taper Adapter Holder, MT-1 Shank - Vertex
Take advantage of the combination of NT40 taper accuracy, compact handling and reliable tool holding to maintain smooth spindle operations; order directly via Metav Werkzeuge or contact our advisers for tailored support. VI-104 Morse taper arbor (NT40) by Vertex — compact precision mounting The VI-104 is a Morse taper arbor designed to provide secure NT40 spindle tool holding for standard milling and turning set-ups, offering repeatable centring for routine workshop operations. Precision NT40 taper for accurate tool holding Lightweight design at approx. 0.9 kg for easy handling Compatible with Vertex tool holders and spindles Precise centring for consistent machining results The arbor is built around the familiar Morse taper principle, ensuring precision alignment between tool and spindle. This results in improved concentricity and predictable repeatability during repetitive operations, which is particularly valuable for fixture setup and short-run production. Clear mating geometry reduces runout potential and helps maintain cutting tool life, contributing to measurable process reliability in everyday machining tasks. Compact form that supports efficient workflow A compact arbor reduces handling time and simplifies set-up procedures. With a nominal weight of 0.9 kg, the component is easy to position and change, which keeps spindle downtime to a minimum. The reduced mass also simplifies manual handling and storage logistics in busy shops, enabling faster tool changes and a smoother workflow when switching between operations or reconditioning tooling. Compatibility with common workshop spindles and holders Designed for the NT40 taper standard, the unit integrates with a broad range of compatible spindles and clamping systems. The standardised interface promotes interchangeability across machines and fixtures, allowing one arbor to service multiple machines without bespoke adapters. Such compatibility supports lean tooling strategies and reduces the need for duplicate components in toolrooms. Practical reliability for daily use and maintenance The design focuses on operational dependability and straightforward maintenance. Regular inspection of mating surfaces and adherence to correct cleaning practices will preserve repeatability and minimise wear-related deviations. Where documentation is needed, GTIN and SKU references enable accurate part control and reordering within inventory systems, supporting structured asset management in industrial environments. For secure NT40 tool holding and practical workshop advice on the Vertex VI-104, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VI-104 GTIN: 4061905095399 Manufacturer: Vertex Core data Weight: 0.9 kg Taper designation: NT40 ECLASS: 21029015 Special features Mounting type: MT-1 Brand: Vertex FAQ What spindle standard does this arbor use? The arbor is designed for the NT40 taper, which is stated for the VI-104 and ensures compatibility with NT40 spindles and compatible tool holders. How heavy is the arbor and does that affect handling? Weight is listed as 0.9 kg; this compact mass simplifies manual handling and accelerates tool changes without special lifting aids. Is the arbor suitable for multiple machines? Yes. The NT40 interface makes the arbor suitable for integration across machines that accept NT40 tapers, promoting interchangeability in the workshop. What identifiers help with stock control and reordering? Use the SKU VI-104 and GTIN 4061905095399 to manage inventory and ensure accurate reordering of the Vertex arbor. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Rubber-Flex-Spannzangen FC
Technische Daten: Bezeichnung: Rubber-Flex-Spannzangen Vollhartmetall Durchmesser: 16 mm bis 26,5 mm Geeignet für: Ø10,38-Ø14mm oder Ø7-Ø10mm je nach Ausführung Länge: 11 mm - 15 mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
SK-30-60L ER-16 Collet Chuck With ER-16 Collets Set, 10 Pieces - Vertex
Efficient toolholding with true-run stability and a compact SK-30 taper interface ensures reliable machining and simplified handling; benefit from the precision of ER-16 clamping and streamlined shop workflows. Order the Vertex V-751A collet chuck set directly via Metav Werkzeuge or consult our specialists for application advice. V-751A Collet chuck (with ER-16 collets) — SK-30-60L interface, Vertex V-751A is a compact collet chuck designed for SK-30-60L taper spindles, supplied as a set with ER-16 collets for precise and repeatable toolholding in workshop and production environments ER-16 collet compatibility SK-30 taper interface Supplied as a complete collet set Compact, lightweight 1.8 kg Consistent clamping for repeatable precision The collet chuck design concentrates clamping force uniformly around the tool shank, reducing runout and improving surface finish. Featuring ER-16 compatibility, the system provides a standardised method for securing a wide range of tool diameters with minimal concentricity deviation. For production runs where repeatability matters, this configuration reduces rework and supports predictable machining tolerance. The modular nature of the chuck allows straightforward replacement of worn components without complex procedures, supporting uptime and steady throughput. Compact interface that simplifies setup and spindle load The SK-30-60L taper interface keeps the toolholder footprint small while maintaining axial and radial rigidity where it matters. At a weight of 1.8 kg, the chuck offers a lightweight option that minimises additional spindle inertia, helping to preserve balance and reduce bearing stress during high-speed operation. The compact construction shortens tool overhang and makes clamping operations easier in confined workspaces, contributing to faster set-ups and fewer balancing adjustments, which in turn supports efficient cycle times on milling and drilling equipment. Ready-to-fit set that reduces procurement complexity Delivered as a complete collet set, the chuck arrives prepared for immediate use with matching ER collets, providing a practical solution for workshops that require quick tool changes and standardised clamping across jobs. The compatibility with ER-16 collets enables flexibility across common tool shank sizes while maintaining secure retention under typical cutting forces. Backed by the Vertex manufacturing standard, the assembly is intended to integrate into existing toolholding ecosystems with minimal adaptation, helping to simplify inventory management and maintain consistent machining results. Contact Metav Werkzeuge for tailored application advice and to secure the Vertex V-751A collet chuck set; reach out via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: V-751A GTIN: 4061905086427 Manufacturer: Vertex EClass: 21020405 Facts Weight: 1.8 kg Taper: SK-30-60L Collet type: ER-16 Set: yes Pieces per set: 10 Special features Supplied with ER collets in set Compact design for reduced overhang Suitable for standardised toolholding applications FAQ What taper does the chuck fit? The chuck is designed for an SK-30-60L taper interface, enabling direct mounting on spindles specified for SK-30 tapers. Which collet type is included with the set? The set is supplied with matching ER-16 collets to provide standardised clamping across common tool shank diameters. Is the chuck suitable for precision milling operations? Yes, the Vertex V-751A collet chuck is intended for precision toolholding with reduced runout when used with appropriately prepared tool shanks. How heavy is the toolholder assembly? The assembly weighs 1.8 kg, offering a compact and lightweight option that helps to keep spindle inertia low. Can the set be integrated into existing toolholding systems? The set is configured to fit SK-30 taper spindles and ER-16 collets, facilitating integration into compatible toolholding setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-30-60L ER-32 Collet Chuck Set With ER-32 Collets, 18-Piece - Vertex
Take advantage of a precise clamping system combined with a rigid SK-30-60L taper and a full ER-32 collet range for reliable spindle performance and reduced setup time. Order the collet chuck directly via Metav Werkzeuge or ask our consultants if needed. Collet chuck with ER collets set – Vertex, SK-30-60L taper, ER-32 A collet chuck designed for secure, concentric clamping in machining applications, supplied as a complete ER collet set suitable for SK-30-60L taper spindles Precision ER-32 clamping system Compatible with SK-30-60L taper spindles Complete ER collet range included Robust construction for repeatable performance High-precision clamping for consistent machining The ER-32 clamping system delivers consistent concentricity and repeatability essential for high-quality machining. By using collets, the clamping surface surrounds the tool shank, reducing run-out compared with single-point holders; this improves surface finish and dimensional accuracy. The design supports quick changes while maintaining clamping force, which reduces idle time at the machine. For operations that require predictable tolerances, the combination of a reliable collet interface and sturdy construction translates directly into fewer rejected parts and smoother production flow. Rigid taper connection for reliable spindle performance A secure interface to the spindle is provided by the SK-30-60L taper, which ensures axial and radial stability under load. This rigidity benefits processes that demand stable cutting conditions, such as finishing passes or high-speed milling, by reducing vibration and tool deflection. The taper design also helps with repeatable re-mounting after tool changes, keeping setup variation to a minimum. Where machine uptime and consistent results are priorities, this taper and chuck pairing supports sustained productivity and predictable machining cycles. Complete set reduces downtime and simplifies tooling logistics Supplied as a set with a full range of ER collets, the solution minimises the need to source individual clamping items and speeds up tool changeovers. Having matched collets ready for the most common shank sizes supports lean workshop organisation and reduces inventory complexity. The overall assembly remains compact and balanced, assisting in stable rotation and prolonged component life. For workshops seeking to streamline tooling management while maintaining machining quality, this all-in-one approach improves efficiency without compromising on precision. Contact Metav Werkzeuge today for technical advice and to secure the Vertex collet chuck set for SK-30-60L applications, ensuring fast delivery from our Emmerich quality hub Technical data Article number: V-754A GTIN: 4061905085697 Brand: Vertex Facts Weight: 4.2 kg Collets per set: 18 Set supplied: yes Special features Collet type: ER-32 Taper: SK-30-60L Supplied as complete ER collet set SKU: V-754A FAQ What spindle taper is required for this collet chuck? The collet chuck is designed for an SK-30-60L taper and will fit spindles with that taper specification. Which collet size does the set use and is it complete? The set uses ER-32 collets and is supplied as a complete range of ER collets for flexible clamping. Is this product suitable for precision finishing operations? Yes, the Vertex collet chuck with ER-32 collets provides the concentricity and rigidity needed for precision finishing and repeatable results. How does the clamping system affect tool run-out? Using ER collets in this collet chuck reduces run-out compared with single-contact holders, improving tolerance control and surface finish. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-25 Collet Chuck Set With 15 ER Collets, 3.5 kg - Vertex
Benefit from the combination of SK-40-70L taper compatibility, an ER-25 collet system and a complete 15-piece set for reliable, fast tool changes; order directly via Metav Werkzeuge or consult the team for technical clarification. Collet chuck V-762 — ER-25 set for SK-40-70L spindles by Vertex A collet chuck V-762 supplied as a ready-to-use set with ER-25 collets, designed for secure tool holding and fast changeovers in SK-40-70L taper spindles. Ready-set with ER-25 collets SK-40-70L taper compatibility 15-piece collet set included Robust construction, 3.5 kg mass Dependable clamping for consistent machining results The collet chuck uses the widely adopted ER-25 collet system to provide secure axial and radial clamping for a variety of tool shank profiles. By compressing uniformly around the tool shank, the mechanism reduces runout and maintains concentricity across repeat operations. This reliability translates into fewer reworks and steadier surface finishes, supporting efficient production processes and predictable cycle times. A ready kit that keeps workshop downtime to a minimum Supplied as a complete 15-piece set, the unit is configured for immediate use, limiting set‑up delays and simplifying inventory management. The assembly mass of 3.5 kg denotes a sturdy build that resists vibration during machining, while compatibility with SK-40-70L tapers ensures integration with standard milling spindles. Together these attributes streamline tool changes and support a smoother workflow on the shop floor. Clear compatibility and practical handling explained Compatibility is centred on the SK-40-70L spindle interface and the ER-25 collet family, which is suitable for standard metric and imperial tool shanks commonly found in general machining. The set format supplies the typical range of clamping sizes for ER-25, reducing the need for separate orders or interim adapters. For identification and ordering the item is listed as V-762, manufactured by Vertex and intended for straightforward installation and maintenance in industrial workshop environments. Choose Vertex quality and secure the V-762 collet chuck through Metav Werkzeuge — consult our specialists in Emmerich for specification support and delivery from stock Technical Data SKU: V-762 GTIN: 4061905087257 Manufacturer: Vertex Weight: 3.5 kg Taper: SK-40-70L Collet type: ER-25 Pieces per set: 15 Facts Mass: 3.5 kg Set quantity: 15 Special features ER-25 collet system Supplied as a set SK-40-70L taper compatibility FAQ What collet system is included with this chuck? The V-762 is supplied with the ER-25 collet system as a complete set, offering the standard range of ER-25 clamping sizes. Which spindle taper does the unit fit? The unit is designed for SK-40-70L taper spindles and is compatible with machines that accept this interface. How many collets are supplied in the set? The set contains 15 collets and related components as delivered with the V-762 from Vertex. Is the V-762 suitable for high-speed applications? The V-762’s robust construction and ER-25 system support stable clamping; for specific spindle speed recommendations consult Vertex or Metav Werkzeuge for machine-matched guidance. How is the product identified for ordering? Order using SKU V-762 or GTIN 4061905087257; the item is listed under Vertex products. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-25 Collet Chuck Set With 7 ER Collets - Vertex
Take advantage of the combination of precise clamping, easy integration with standard tool spindles and a ready-to-use set of ER collets for efficient tool changes. Order the set directly via Metav Werkzeuge or contact the consultants for integration advice. Collet chuck V-763 with ER-25 collets, SK-40 taper – Vertex A collet chuck V-763 engineered for secure, concentric workholding in milling and drilling applications, supplied as a set with ER-25 collets for flexible clamping Vertex collet chuck »V-763« with ER-25 collets Taper SK-40-70L for standard toolholders Supplied as a set including seven ER-25 collets Robust 3.2 kg construction for stable clamping Precise clamping for repeatable machining The combination of an ER collet system and a balanced chuck body delivers consistent concentricity and low runout, essential for high-precision machining. ER-25 collets are a widely used standard for small to medium tooling and provide fine radial support to the tool shank. This results in reduced vibration and improved surface finish, which increases process reliability and reduces scrap rates. Ready-to-fit set for faster tool changes Delivered as a complete set with seven ER-25 collets, the system supports quick collet swaps and straightforward organisation at the machine. The SK-40-70L taper ensures compatibility with spindles that accept SK-40 tooling interfaces, allowing straightforward integration into existing setups. The set format reduces setup time and simplifies inventory management for workshops and production cells. Stable construction and trusted manufacturer background Constructed to provide stable clamping while keeping mass moderate at 3.2 kg, the chuck offers a balance between rigidity and manageable handling during installation. Manufactured by Vertex, the product reflects established expertise in toolholding. For customers seeking consistent supply and quality assurance for precision tools, Metav Werkzeuge acts as a reliable distribution partner and quality filter for the European market Contact Metav Werkzeuge for expert advice on integrating the Vertex V-763 into existing SK-40 spindles and to confirm availability from stock in Emmerich Technical Data Article number: V-763 GTIN: 4061905087455 Manufacturer: Vertex Facts Weight: 3.2 kg Pieces per set: 7 Collet type: ER-25 Special features Taper: SK-40-70L Supplied as complete set with collets Suitable for standard tooling interfaces ECLASS: 21020405 FAQ What collet type is included in the set? The set contains ER-25 collets; the Vertex collet chuck V-763 is supplied with seven ER-25 collets for immediate use. Which spindle taper is compatible with this chuck? The chuck uses a SK-40-70L taper and is intended for spindles that accept SK-40 tooling interfaces. Is the chuck ready to fit out of the box? Yes, the Vertex V-763 is supplied as a complete set with collets and is ready for installation where a compatible SK-40 taper is available. How does the chuck affect machining accuracy? The ER-25 collet system in combination with the balanced chuck body reduces runout and vibration, improving repeatability and surface finish during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-32 Collet Chuck Set With 18 ER-32 Collets, SK40 Taper - Vertex
Take advantage of the combination of accurate clamping, broad compatibility and kit convenience to speed up setup and boost machining consistency. Order the complete system directly via Metav Werkzeuge or contact the consultants for tailored integration advice. Collet chuck V-753 – ER-32 set, SK-40 taper (Vertex) A collet chuck V-753 supplied with an 18-piece ER-32 collet set for secure workpiece clamping on SK-40 spindles in general machining environments ER-32 collet set, 18 pieces SK-40 taper with 70L projection Solid 5.2 kg mass for stability Supplied by Vertex, SKU V-753 Consistent clamping for repeatable machining quality The ER collet system offers concentric clamping that reduces runout and improves part accuracy. Fitting an SK-40 spindle taper, this chuck integrates a complete ER-32 collet assortment, enabling fast tool-up and predictable gripping performance across a range of diameters. The clamping concept minimises radial play, which in turn reduces scrap rates and rework requirements; this is particularly beneficial in serial operations and CNC setups where process repeatability directly affects throughput. Mass and form that reduce vibration and setup time A higher mass contributes to damping during cutting, and the unit’s 5.2 kg weight supports steady performance under load without elaborate countermeasures. The compact projection indicated by 70L helps to balance accessibility and rigidity on medium-duty machines. This balance of form and mass shortens setup cycles because fixtures remain stable once tightened, translating into fewer machine stops for recalibration and a more efficient shop floor rhythm. Kit format for immediate use and flexible clamping Supplied as an 18-piece ER-32 set, the chuck arrives ready for a broad span of clamping tasks, removing the need for incremental purchases of individual collets. The set format reduces downtime between jobs, as commonly used collet sizes are available at the bench. Compatibility with standard ER-32 tooling conventions simplifies inventory management and supports a streamlined tooling strategy that benefits production planning and cost control. Proven supply chain and application support Manufactured by Vertex, the product benefits from established production standards and traceable component origins. Metav’s role as a European distributor provides an additional quality filter: central warehousing in Emmerich ensures reliable availability and pragmatic order fulfilment. This supply model is intended to democratise precision by making dependable clamping solutions accessible for workshops and industrial users alike, reinforcing operational confidence across small and large production environments. Contact Metav Werkzeuge for application-specific advice and to arrange delivery of the Vertex V-753 collet chuck; the Metav team in Emmerich can advise on integration and spare parts availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: V-753 GTIN: 4061905085246 Manufacturer: Vertex Facts Weight: 5.2 kg Pieces per set: 18 Taper/designation: SK-40-70L Special features Collet type: ER-32 Supplied as set: yes Brand: Vertex FAQ Is the chuck compatible with SK-40 spindles? The Vertex V-753 collet chuck is designed for SK-40 taper spindles and the designation SK-40-70L indicates the matching projection. What is included in the collet set? The product is supplied as an 18-piece ER-32 collet set; the set format supports a wide range of clamping diameters following ER-32 standards. Is this suitable for high-precision work? Yes, the ER collet system and the chuck’s mass contribute to reduced runout and improved clamping stability for precision machining tasks. Where can the SKU and GTIN be found for ordering? Ordering references are SKU V-753 and GTIN 4061905085246 for the Vertex collet chuck. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-32 Collet Chuck Set With Six ER-32 Collets, SK-40 Taper - Vertex
Reliable machining through precise ER‑32 clamping and a secure SK‑40‑70L taper ensures stable toolholding and reduced setup time; the compact, robust construction at 3.8 kg supports consistent results. Order the Vertex collet chuck set directly via Metav Werkzeuge or consult their product advisers for tailored integration. Collet chuck V-755 by Vertex — ER‑32 set, SK‑40‑70L taper A robust collet chuck V-755 designed for secure toolholding in milling and CNC applications, supplied as a complete ER collet set for fast, repeatable setups. ER‑32 collet compatibility for precision gripping SK‑40‑70L taper for secure spindle mounting Supplied as a complete collet chuck set Higher throughput thanks to accurate clamping The combination of ER‑32 collets and a precision-ground chuck body delivers precise clamping that reduces radial runout and minimises rework. By keeping the tool axis concentric to the spindle, machining tolerances become more reliable and cycle times more predictable. This results in tangible productivity gains for serial production and prototype runs alike, with less time spent on re-adjustment and inspection. Seamless integration with standard spindles Built for compatibility with the SK‑40‑70L spindle taper, the chuck offers straightforward mounting on machines that accept this shank form. The moderate mass of 3.8 kg contributes to rotational stability without imposing excessive spindle load, supporting steady cuts and consistent surface finish. Clear mechanical interfaces reduce installation time and simplify tool change procedures, making the assembly suitable for both workshop and small-series manufacturing environments. Robust design for dependable workshop use Supplied as a ready-to-fit set, the chuck assembly is engineered to withstand everyday shop demands while simplifying routine maintenance. The ER collet concept provides both versatility and grip security for a wide range of tool shanks, supporting repeatable clamping cycles and quick replacements. Manufactured by a recognised brand, the unit is aimed at workshops seeking dependable toolholding that integrates with existing milling infrastructure. Contact Metav Werkzeuge for availability, ordering and integration advice on the Vertex V-755 collet chuck set — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: V-755 GTIN: 4061905086885 Manufacturer: Vertex Facts Weight: 3.8 kg Set pieces: 6 eClass: 21020405 Special features Collet type: ER-32 Taper: SK-40-70L Set: yes Brand: Vertex FAQ Which spindle taper is required for mounting this chuck? The chuck requires an SK‑40‑70L taper; machines with this taper dimension are suitable for mounting the device. What type of collets are supplied with the chuck? The set is supplied with ER‑32 collets, enabling standardised clamping across a wide range of tool shank diameters. How much does the assembly weigh and why does that matter? The assembly weighs 3.8 kg; this mass contributes to rotational stability and can improve surface finish by reducing vibration during cutting. Is the V-755 suitable for high-precision finishing operations? Yes, the ER collet system and precise spindle interface make the V-755 well suited to finishing tasks where concentricity and low runout are important. Are balancing specifications provided for high-speed applications? The product data does not include explicit balancing specifications; consideration of spindle speed and application-specific balancing should be made before high-speed use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-40-70L ER-32 Collet Chuck With ER Collets Set, 11 Pieces - Vertex
The combination of a precise ER-32 clamping system and the SK-40-70L taper ensures reliable, repeatable tool holding for production environments; the included 11-piece collet assortment and the 4.2 kg mass contribute to stable running and fewer changeovers. Order the set directly via Metav Werkzeuge or consult the team for compatibility advice. V-754 Collet chuck with ER-32 collets — SK-40-70L taper, Vertex A compact V-754 collet chuck supplied as a complete ER-32 set for machining centres requiring SK-40 taper compatibility. ER-32 collet set included SK-40-70L taper compatibility 11 collets per set Weight 4.2 kg for stable operation Consistent precision for repeatable machining A well-executed clamping system reduces variation at the toolholder and improves part tolerances. The collet chuck design secures the tool with axial and radial grip, which contributes to lower vibration and consistent cutting conditions. Because the unit uses ER-32 collets, clamping concentricity is inherent to the system, supporting repeatable results across batches. The modest mass of 4.2 kg helps dampen minor spindle oscillations, thereby aiding stability without adding excessive inertia to the machine. Compatibility that simplifies tooling and setup Compatibility with the SK-40-70L taper allows straightforward integration into spindles that accept SK-40 interfaces, reducing the need for additional adapters or conversions. The ready set approach contains an assortment of collets to cover a practical range of diameters, which shortens downtime during tool changes and simplifies inventory management on the shop floor. Where programme variety and frequent tool swaps occur, a single ER collet set keeps operations lean and predictable. Ready-to-fit set to maintain production continuity Delivering the chuck as a complete set with 11 collets means common bore sizes are covered from the outset, lowering the risk of interrupted production while the correct collet is sourced. The set form factor is especially useful in workshop environments that prioritise rapid changeovers and consistent clamping quality. Supplied as a balanced system for manual mounting, the assembly reduces setup complexity and streamlines the process from installation to machining. For secure procurement and rapid delivery choose the Vertex V-754 collet chuck set via Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility guidance and order support Technical Data SKU: V-754 GTIN: 4061905085260 EClass: 21020405 Facts Weight: 4.2 kg Pieces per set: 11 Collet type: ER-32 Special features Taper interface: SK-40-70L Supplied as a complete collet set Manufacturer: Vertex FAQ What is included in the collet set? The set includes the collet chuck and an assortment of 11 ER-32 collets; the complete configuration is delivered as the Vertex V-754 collet chuck set. Which spindle taper does this chuck fit? The chuck is compatible with spindles that accept the SK-40-70L taper interface. Can this collet system cover a broad range of tool diameters? Yes, the 11-piece ER-32 assortment covers a practical range of diameters for general workshop and production use. Is the V-754 suitable for frequent tool changes? Supplied as a ready set, the V-754 reduces changeover time through its complete collet assortment and standard SK-40 taper compatibility. Does the chuck support stable running during machining? The design and mass of the unit promote stable clamping and reduced vibration, contributing to consistent running and part quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50-100L ER-32 Collet Chuck Set With 18 ER-32 Collets, SK50 Taper - Vertex
Take advantage of the combination of precise ER-32 clamping, a robust SK-50 taper interface and a complete 18-piece collet set for dependable toolholding and reduced setup time. Order the collet chuck directly via Metav Werkzeuge or consult the product specialists for integration advice. V-754B Collet chuck — collet chuck with ER-32 set, SK-50-100L taper by Vertex A high-precision V-754B collet chuck supplied as a complete ER-32 collet set for secure tool clamping on SK-50 spindle tapers, intended for machining centres and rigid toolholding applications ER-32 collet set included (18 pieces) Designed for SK-50-100L taper Complete set, ready for mounting Weight 7 kg for stable clamping Consistent precision for tighter tolerances The clamping system relies on ER-32 collets to deliver uniform radial force and improved concentricity, which helps to reduce cutting variations and achieve more consistent surface finish. As a mechanical solution for tool retention, the arrangement minimises lateral movement during machining and supports repeatable positioning. The construction of the chuck and collet set focuses on reliability and predictable performance rather than speculative claims, making it suitable where stability and repeatability matter most. Robust spindle interface for rigid machining setups Compatibility with the SK-50-100L taper provides a solid interface to the machine spindle, ensuring a rigid connection that contributes to machining stability. The assembly’s mass — approximately 7 kg — adds inertia that can help dampen vibration in demanding operations, while the taper geometry secures axial and radial loads. Where a durable, mechanical connection between spindle and toolholder is required, this configuration is a practical choice for reducing unintended tool movement and improving process control. Ready-to-use set that reduces preparation time Delivered as an 18-piece set, the package includes a range of ER-32 collets to cover common tool diameters, enabling quick tool changes and flexible setup options on the shop floor. The set approach streamlines inventory and supports faster changeovers compared with sourcing collets separately. Supplied by Vertex, the assembly is designed for efficient workshop integration and straightforward storage, contributing to a more organised and productive tooling workflow for routine CNC operations. Contact Metav Werkzeuge in Emmerich to review technical compatibility for the V-754B and to request a tailored specification or quotation from the Metav specialists Technical data Article number: V-754B GTIN: 4061905086175 Manufacturer: Vertex Weight: 7 kg Core technical numbers Pieces per set: 18 Collet type: ER-32 Taper: SK-50-100L Special features ER-32 collets included (18 pieces) Set format for immediate use Taper interface suited to SK-50 spindle systems Brand: Vertex FAQ What collet type is supplied with the set? The set is supplied with ER-32 collets; the V-754B set contains 18 ER-32 collets for a range of tool diameters. Which spindle taper does the chuck fit? The chuck is specified for the SK-50-100L taper interface and is intended for machines equipped with the corresponding SK-50 spindle taper. How many pieces are included in the set? The delivery comprises an 18-piece set of ER-32 collets as part of the V-754B package from Vertex. Is the V-754B suitable for quick tool changes? The collet set format supports faster changeovers by providing a selection of ER-32 collets for common diameters, reducing the need to source individual collets. What is the overall weight of the assembly? The assembly weight is listed as 7 kg, which contributes to a stable toolholding arrangement at the spindle interface. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50-100L ER-40 Collet Chuck Set With ER Collets, 15 Pieces - Vertex
Take advantage of the combination of robust spindle mounting, versatile ER-40 clamping and a complete 15-piece set for reliable toolholding and reduced changeover time. Order the collet chuck set directly via Metav Werkzeuge or consult our advisors for application-specific selection. V-757 Collet Chuck Set with ER-40 — SK-50-100L by Vertex The V-757 collet chuck set is a ready-to-fit clamping solution for machining centres and tool spindles that require a secure, high-precision grip with an SK-50 taper. ER-40 collet system for wide clamping range Complete 15-piece collet set included SK-50-100L taper for robust spindle mounting Durable construction, stable under high load Consistent, secure clamping for productive machining The V-757 combines a precision collet chuck design with the widely used ER-40 system to deliver repeatable clamping force and consistent concentricity in serial and single-part production. The ER-40 interface is engineered for secure grip of common tool shanks and quick tool changes, which reduces non-productive time and improves throughput. The SK-50 taper ensures a rigid connection to the spindle, helping to maintain cutting stability under varied machining conditions. This configuration supports reliable part quality and makes process planning more predictable. Ready-to-use set that shortens setup time Supplied as a 15-piece set, the assembly includes a comprehensive range of collets and the chuck body, enabling immediate deployment at the machine without supplementary ordering. Having the set at the bench reduces search time and simplifies tool inventory management, supporting lean workshop workflows. The unit’s mass (approx. 7.6 kg) contributes to stable behaviour in the spindle and can dampen minor vibration, which helps to extend tool life and preserve finish quality on precision components. Built for professional environments and long-term operation Designed for industrial clamping applications, the chuck and collets exhibit robust mechanical construction suitable for continuous use. The SK-50-100L taper and ER-40 interface are standardised interfaces that ease compatibility with existing toolholders and spindles in production environments. Maintenance consists mainly of regular cleaning and inspection for wear; this straightforward approach helps preserve clamping accuracy and reduces lifecycle costs. For workshops seeking dependable toolholding without complex maintenance regimes, the set offers a pragmatic balance of durability and simplicity. Contact Metav Werkzeuge today for application advice and to check compatibility with your spindle — Metav’s experts will recommend the optimal configuration for your machining needs and delivery proximity from Emmerich is guaranteed Technical Data Article number: V-757 GTIN: 4061905085987 Manufacturer: Vertex Facts Weight: 7.6 kg Pieces per set: 15 ECLASS: 21020405 Special features Taper: SK-50-100L Collet type: ER-40 Scope of delivery: collet chuck with ER collets (set) FAQ What materials is the chuck suitable for? The V-757 collet chuck set is intended for general toolholding in machining; suitability depends on tooling and cutting parameters rather than the chuck itself. Which collet sizes are included in the 15-piece set? The 15-piece set supplied with the V-757 contains a standard selection of ER-40 collets to cover common shank diameters for workshop use. Can the chuck be mounted directly in any SK-50 spindle? The SK-50-100L taper on the V-757 matches machines using the SK-50 standard; verify spindle specifications before mounting to ensure compatibility. How does the ER-40 system affect changeover times? The ER-40 system in this set simplifies tool changes and reduces downtime, since collet swapping is fast and does not require complex adapters. Is the set suitable for production or only for maintenance use? The design and construction of the V-757 make it suitable for continuous production use where standard ER-40 clamping and SK-50 mounting are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
SK-50-100L ER-40 Collet Chuck Set With ER Collets, 7-Piece - Vertex
Combine secure ER‑40 clamping with an SK50 taper and a seven-piece collet set to improve machining repeatability and changeover speed. Order the V-761 directly via Metav Werkzeuge or consult the team for application advice. Spannzangenfutter V-761 — ER‑40 collet chuck with SK50 taper (100L) by Vertex The Spannzangenfutter V-761 is a precision collet chuck designed for reliable tool holding on SK50 (100L) taper spindles in industrial machining environments. ER-40 collet system for broad clamping range SK50 taper with 100L projection for deep machining Seven-piece collet set for common tool diameters Robust 8.5 kg construction for industrial use Improved machining accuracy through repeatable clamping The V-761 combines an ER‑40 collet system with an SK50 interface to deliver repeatable concentricity and reduced runout, which directly lowers scrap rates and rework. The collet design ensures uniform radial pressure, improving tool stability under load. For users converting from other collet standards, the chuck provides a familiar clamping principle while maintaining industrial tolerances. Emphasis on mechanical consistency supports higher first-pass yields and predictable process capability. Stability and reach for longer tools and deep operations With the SK50 taper and a 100L projection, the chuck offers increased reach without sacrificing spindle stability. The longer projection is engineered to handle deeper machining tasks while the mass of the assembly—8.5 kg—helps dampen vibration during heavy cuts. This combination supports higher cutting feed rates and improved surface finish in demanding operations. The taper interface is compatible with standard SK50 tooling systems, enabling straightforward integration into existing spindle setups. Ready-to-fit set that speeds up workshop workflows Supplied as a set with seven ER collets, the V-761 reduces the need for immediate accessory purchases and simplifies initial commissioning. The seven-piece configuration covers the most commonly used tool diameters, allowing quicker tool changeovers and less downtime. The set format supports efficient stock management in the tooling cupboard and facilitates predictable tooling logistics for production planning. Compatibility with standard ER‑40 collets ensures flexible replacement and long-term upkeep. For precise machining with the Vertex V-761, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data SKU: V-761 GTIN: 4061905086229 Manufacturer: Vertex Taper: SK50 (100L) Collet type: ER-40 Pieces per set: 7 Weight: 8.5 kg ECLASS: 21020405 Features and compatibility ER-40 collet system SK50 taper interface (100L projection) Seven-piece ER collet set included Suitable for industrial machining environments FAQ What collet system does the chuck use? The chuck uses the ER‑40 collet system, which is supplied as a seven-piece set with the V-761 to cover common tool diameters. Is the taper compatible with standard SK50 spindles? Yes. The V-761 is designed for the SK50 (100L) taper interface and fits standard SK50 spindle preparations. How does the V-761 improve machining results? By combining ER‑40 clamping with the SK50 taper and mass-stabilised design, the V-761 increases clamping repeatability and reduces vibration, supporting improved surface finish and dimensional accuracy. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Spannzange 5C
Technische Daten: Bezeichnung: Spannzange VHM Durchmesser: 3 mm bis 9 mm auch als Satz verfügbar Genauigkeit: 0,02 mm Gewicht: 0,21 kg bis 1,5 kg Länge: 87 mm Stück pro Satz: 7 Inhalt: Spannzangen 6/8/10/12/16/20/25mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: VERTEX ist seit 1978 der führende Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² hat VERTEX die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch einen starken Fokus auf Forschung und Entwicklung ist VERTEX bekannt für seine innovativen Designs, die die Leistung und Effizienz von Maschinen steigern. Die hohe Lagerverfügbarkeit von 98% aller Artikel ermöglicht es den Kunden, schnell und unkompliziert auf ihre Bedürfnisse zu reagieren. VERTEX legt großen Wert auf Qualität und Kundenzufriedenheit und ist bestrebt, die individuellen Anforderungen der Kunden zu erfüllen. Als vertrauenswürdiger Hersteller ist VERTEX stets bereit, seinen Kunden hochwertige Maschinenteile anzubieten und einen herausragenden Service zu gewährleisten.
Spannzangenfutter mit R8-Aufnahme
Technische Daten: Bezeichnung: Spannzangenfutter Vollhartmetall auch als Satz verfügbar Gewicht: 0,5 kg - 7,3 kg Stück pro Satz: 6 bis 23 Aufnahme: R8 Kegel: ER-16 Spannzangen Typ: ER-16 bis R8 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Spannzangensätze
Technische Daten: Bezeichnung: Spannzangensätze VHM auch als Satz verfügbar Stück pro Satz: 7 - 23 Inhalt: Ø0,5-10,0mm bis Ø3-26mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.
Ø0.5-10.0mm Collet Set For ER Collet Chucks, 10 Pieces - Vertex
Take advantage of the combination of precise 0.5–10.0 mm clamping, a 10-piece configuration and Vertex build quality for reliable small-diameter toolholding; order directly via Metav Werkzeuge or consult our specialists for application advice. Collet set V16000 by Vertex — 0.5–10.0 mm precision clamping, 10-piece kit The Collet set V16000 delivers a compact solution for accurate clamping of small-diameter tooling in machining and workshop environments, designed for consistent tool concentricity and repeatable results. Precision clamping 0.5–10.0 mm 10-piece set for versatile toolholding Compatible with standard collet chucks Durable construction for workshop use Consistent accuracy that reduces rework A set configured for a broad 0.5–10.0 mm diameter range supports a variety of small tooling without frequent changes, improving uptime. The 10-piece composition simplifies tool changes and inventory management; fewer setups reduce the risk of misalignment and rework. Built for repeatability, the kit emphasises precision over long production runs so that machining tolerances remain stable and throughput stays predictable. Faster workflows through simple handling A well-organised collet kit streamlines tool exchange and minimises machine downtime. The compact layout and labelled sizes enable quick selection, while the engineering of each component focuses on secure clamping and low runout. These characteristics translate into smoother operations, higher first-pass yields and measurable time savings on routine tasks — a clear rational advantage for busy shops pursuing efficiency. Broad applicability across workshop tasks Suited to small-diameter milling, drilling and finishing tasks, the set supports diverse workshop requirements without overcomplicating procurement. Compatibility with common clamping systems facilitates integration into existing setups, offering operational flexibility. The emphasis on reliable toolholding makes the kit particularly useful for precision benches, prototyping work or series production where consistent results are essential. Robust design and serviceable longevity Manufactured by Vertex to workshop standards, the kit balances durability and maintainability. Components are designed to withstand regular use on the shop floor while preserving concentricity. That long-term performance reduces replacement frequency and supports predictable tooling budgets. The practical benefit is fewer interruptions and a dependable clamping baseline for everyday machining. Discuss the Vertex V16000 with Metav Werkzeuge to match the collet configuration to specific toolholding needs and secure reliable small-diameter clamping for production or workshop use Technical data SKU: V16000 GTIN: 4061905087615 Brand: Vertex Content: Ø0.5–10.0 mm Set contents: 10 collets Core specifications Diameter range: 0.5–10.0 mm Pieces per set: 10 eClass: 21022190 Features & compatibility Product type: Collet set Suitable for small-diameter toolholding Packaged for workshop use FAQ Which diameter range is covered by the set? The collet set V16000 covers a 0.5–10.0 mm diameter range, offering close steps for small-diameter tooling. How many collets are included in the kit? The kit contains 10 collets, providing a practical spread of sizes for typical workshop requirements. Is the set compatible with standard collet chucks? Yes, the set is designed for use with common collet chucks and integrates readily into standard toolholding arrangements. What advantages does Vertex engineering provide? Vertex manufacturing ensures robust clamping performance and repeatability, contributing to consistent machining results and reduced rework. Can the set be used for both prototyping and series production? The precision and repeatability of the V16000 make it suitable for both prototyping and small-to-medium series production tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø0.5-5.0mm Collet Set With 9 Pieces, Quick Change - Vertex
Gain consistent clamping across a broad diameter span and reduce changeover time with a 9-piece assortment covering Ø0.5–5.0 mm; order the collet set directly via Metav Werkzeuge or ask their consultants for advice. Vertex V08000 collet set — 9-piece precision clamping, Ø0.5–5.0 mm The Vertex V08000 is a compact collet set for precision toolholding, suited to small-diameter milling and drilling tasks where secure, concentric clamping is required. Precision clamping for small-diameter tools Diameter range Ø0.5–5.0 mm 9-piece set for versatile coverage Consistent concentricity for repeatable production High repeatability is essential in precision machining; this collet assortment delivers stable, centred clamping that reduces runout and enhances surface finish. By covering a continuous Ø0.5–5.0 mm span, the set minimises the need for intermediate adapters and keeps tolerances predictable during short production runs or prototype work. The emphasis on secure gripping translates into fewer rejects and a steadier process chain when handling small tooling. Quicker changeovers and streamlined workflows A dedicated 9-piece set helps to cut set-up time by keeping commonly used diameters on hand and ready for immediate use. Reduced handling of individual collets speeds machine changeovers and supports efficient tool management in busy workshops. When combined with disciplined storage and marking practices, the assortment supports faster tool selection and fewer pauses between operations, improving overall throughput without compromising accuracy. Practical suitability for precision shops and specialist tasks This collet collection integrates easily into standard precision chucks and toolholders used in metalworking and model engineering, making it a practical choice for both repair shops and production benches. The configuration is tailored to small-diameter tooling needs, providing a balance between flexibility and orderliness in the tool cupboard. For tasks requiring tight concentricity and repeatable clamping behaviour, the set is a sensible complement to existing toolholding equipment. Order the Vertex V08000 collet set via Metav Werkzeuge for dependable supply and tailored advice — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with selection and delivery. Technical data Article number: V08000 GTIN: 4061905083549 ECLASS: 21022190 Facts Pieces per set: 9 Diameter range: Ø0.5–5.0 mm Special features Brand: Vertex Set: Yes Contains collets for small-diameter tooling FAQ What sizes are included in the set? The set covers the continuous diameter range Ø0.5–5.0 mm, supplied as a 9-piece assortment tailored for small-diameter toolholding. How many pieces are in the V08000 collet set? The Vertex V08000 collet set comprises 9 pieces, providing incremental coverage across the stated diameter range. Is this collet set suitable for precision milling and drilling? Yes, the V08000 collet set is designed for precision clamping of small-diameter milling and drilling tools where concentricity and repeatability are important. How should the collets be maintained for long service life? Regular cleaning of the collet bore and holder taper, gentle lubrication of moving parts and inspection for wear will help maintain the clamping performance of the collet set. Can the collet set be used with standard precision chucks? The collets in this set are intended for use with compatible precision toolholders and chucks commonly found in workshops; check the holder type to ensure fit. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø0.5-7.0mm Collet Set For ER Collets, 7 Pieces - Vertex
The combination of high concentricity and a wide diameter range Ø0.5–7.0 mm ensures consistent tool performance and minimal downtime; supplied as a practical 7-piece set for straightforward integration into existing workholding routines. Order the collet set directly via Metav Werkzeuge or ask our consultants if needed. Vertex Collet Set V11000 — 7-piece, Ø0.5–7.0 mm A Vertex Collet Set V11000 engineered to provide secure workholding for small-diameter tooling across a Ø0.5–7.0 mm range Precision-ground collets for consistent runout Coverage Ø0.5–7.0 mm for flexible machining Complete 7-piece set for quick tool changes Compatible with standard toolholders and spindles Consistent concentricity for tighter tolerances Collets are the foundation of accurate small-diameter machining. The set delivers consistent concentricity, which directly reduces radial deviation and improves repeatability across series production. By gripping tools uniformly around the circumference, the system minimises runout, so cutters and drills track true and tool life is extended. For operations that rely on repeatable hole quality or fine detail work, this translates into fewer rejects and less rework. The mechanical principle is straightforward — a uniform clamping surface keeps the cutting edge aligned with the spindle axis — but the result is measurable: cleaner finishes, reproducible hole positions and improved process stability. Broad diameter coverage to boost productivity A flexible diameter range of Ø0.5–7.0 mm allows a single kit to cover many common small-tool sizes, reducing the need to switch between multiple holders. The set approach supports faster tool changes and a leaner tooling inventory, which benefits shop floors aiming for short setup times and uninterrupted batch runs. Where frequent size changes are required, the organised 7-piece configuration shortens downtime and simplifies job preparation. The practical outcome is a smoother workflow — fewer interruptions for tool swaps, clearer tool management and a tangible improvement in throughput for small-part and precision component manufacturing. Practical kit design that supports workshop routines Supplied as a compact set, the collets are intended for straightforward use and maintenance. Regular cleaning of the clamping bore and periodic inspection for wear help to preserve concentricity and maintain consistent clamping force. Simple checks with a dial indicator will identify any increase in runout early, allowing corrective action before quality is affected. The kit’s layout supports quick selection and replacement of collets during changeovers, which suits both manual and CNC environments. Combined with reliable distribution from Metav, the set integrates into existing toolrooms without complex retrofitting, offering a practical, efficiency-oriented solution for precision workholding. For precision workholding across Ø0.5–7.0 mm, contact Metav Werkzeuge for tailored advice or to arrange supply of the Vertex Collet Set V11000 from our Emmerich warehouse — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical data SKU: V11000 GTIN: 4061905086502 Brand: Vertex Facts Diameter range: Ø0.5–7.0 mm Pieces per set: 7 Set: yes Special features Complete coverage for small-diameter tooling Supplied as a 7-piece set Image file: v08000-main.jpg FAQ What diameters are covered by the set? The set covers Ø0.5–7.0 mm, enabling handling of a wide range of small-diameter tools with the supplied collets. What is included in the delivery? Delivery comprises a 7-piece collet set as described; the Vertex Collet Set V11000 contains collets sized to the Ø0.5–7.0 mm range for efficient tool changes. Is the set suitable for high-precision machining? Yes, the collets are designed to maintain low runout and high concentricity, which supports high-precision drilling and milling operations when used with appropriate machine and tool preparations. How should the collets be maintained? Regular cleaning of the clamping bore, inspection for wear and routine runout checks are recommended to preserve performance and prolong service life of the set. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø1-13mm Collet Set For ER Collets, 12 Pieces - Vertex
Consistent component clamping is achieved by combining a broad diameter range (Ø1–13 mm), a complete twelve-piece set and reliable Vertex engineering — ensuring secure, repeatable results on the shop floor. Order the Collet Set V20000 directly via Metav Werkzeuge or ask our consultants for advice. Collet Set V20000 by Vertex – Ø1–13 mm, 12-piece precision clamping A precision clamping solution, the Collet Set V20000 is designed to provide secure tool holding across a broad diameter range for general workshop and industrial machining applications. Wide clamping range Ø1–13 mm Complete 12-piece collet set Precision clamping for repeatable runs Consistent accuracy for productive machining The Ø1–13 mm clamping span delivers a versatile solution for common micromachining and finishing tasks, reducing the need for multiple tool holders. Using high-precision collets ensures concentricity and minimises runout, which directly improves surface finish and reduces rework. The precision clamping system is particularly effective in series production where repeatability and tool stability determine throughput and scrap rates. Where tolerance matters, predictable clamping behaviour leads to measurable time and cost savings on the shop floor. Faster set-up and flexible workshop use A 12-piece kit consolidates the most frequently used diameters into one organised set, shortening changeover times and simplifying inventory management. The collets are arranged to support quick selection and swapping during operations, which keeps machine uptime high. For mixed-batch work the variety within the set allows a single chucking solution to cover a broad range of parts, cutting the number of tool changes and supporting a leaner workflow. This tangible convenience enhances operational efficiency without compromising on machining quality. Durable design for industrial environments Manufactured by Vertex, the system is built to withstand daily workshop demands and maintain clamping integrity over repeated cycles. Robust construction reduces the frequency of replacements and provides stable gripping force under typical cutting conditions. The set is suited to integration with standard collet chucks and toolholders, supporting both maintenance-friendly handling and predictable performance in production contexts. By relying on proven engineering, the kit supports long-term planning and consistent output quality. For tailored advice on integrating the Vertex Collet Set V20000 into existing toolholding systems, contact Metav Werkzeuge — our Emmerich-based team will recommend the optimal configuration and arrange prompt supply. Technical Data Article number: V20000 GTIN: 4061905087738 Manufacturer: Vertex Facts Diameter range: Ø1–13 mm Pieces per set: 12 eClass: 21022190 Special features Set: Collet set for precision clamping Brand: Vertex Packaging: Set (suitable for workshop inventory) FAQ What size range does the collet set cover? The Vertex Collet Set V20000 covers a diameter range of Ø1–13 mm, providing a broad span for common tool and workpiece sizes. How many collets are included in the kit? The kit comprises 12 pieces, arranged to cover frequently required diameters and to reduce changeover time. Is the set compatible with standard collet chucks? Yes, the Collet Set V20000 is designed for use with standard collet chucks and typical toolholding setups in general workshop and industrial environments. Can the collets maintain concentricity for high-precision tasks? The collets are engineered for precision clamping to minimise runout and help achieve consistent results in precision machining operations. Who is the manufacturer of the set? The set is produced by Vertex and distributed with product identification V20000 and GTIN 4061905087738. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø1-16mm Collet Set, 15 Pieces — Vertex
Take advantage of a wide Ø1–16 mm clamping range and a complete 15-piece configuration to streamline small-diameter toolholding. The set combines reliable Vertex manufacturing with practical workshop versatility — order the collet set directly via Metav Werkzeuge or ask our consultants if needed. Vertex V25000 Collet Set — Ø1–16 mm, 15-piece clamping kit A Vertex V25000 collet set engineered for precise, repeatable clamping of small-diameter tools and workpieces across general workshop and light industrial applications. Precision clamping Ø1–16 mm range Complete 15-piece set for versatile use High-quality Vertex manufacturing Robust organisation for quick selection Consistent precision for small-diameter operations The 15-piece clamping kit delivers a continuous Ø1–16 mm range, enabling secure holding of drills, end mills and tool shanks without time-consuming improvisation. Using matched collets reduces runout and improves concentricity compared with generic chucks, which directly benefits hole quality and surface finish. The modular nature of the set supports rapid changeover between tool sizes, increasing machine uptime and reducing setup-related scrap. Built for dependable workshop performance Manufactured by Vertex, the set emphasises repeatability and durability; durable production tolerances ensure consistent gripping force across the supplied range. For general machining tasks, the positive clamping action provides reliable retention at moderate spindle speeds and typical workshop feed rates. The pragmatic design of the kit supports fast selection and replacement, helping to maintain production flow while limiting the need for frequent rework. Organised supply reduces downtime Delivered as a complete 15-piece set, the components are arranged to make identification and storage straightforward. A well-ordered kit minimises search time and helps maintain tool management routines on the shop floor. The consistent increment coverage within the Ø1–16 mm span means fewer auxiliary purchases and a simpler inventory structure, which is particularly useful for maintenance teams and small workshops aiming to standardise tooling. Choice and compatibility explained This clamping set is intended as a practical solution for holding small-diameter tooling where accurate concentricity and secure retention matter. The kit functions as a core toolholding accessory for many bench and light machining tasks. For installations requiring specific collet systems or spindles, compatibility checks are recommended; the SKU and technical data supplied below support straightforward verification prior to ordering. Contact Metav Werkzeuge to request the Vertex V25000 collet set for your workshop or to receive tailored guidance from our specialists — Metav Werkzeuge in Emmerich delivers precision products with dependable service Technical data Article number: V25000 GTIN: 4061905087035 Manufacturer: Vertex Facts Diameter range: 1–16 mm Pieces per set: 15 Special features Complete collet set for small-diameter toolholding Organised kit for quick selection and storage Designed for workshop and light industrial use FAQ What diameter range does the collet set cover? The Vertex V25000 collet set covers a continuous Ø1–16 mm range, supplied across the 15 included pieces. Is the set suitable for general workshop use? Yes, the 15-piece Vertex set is intended for workshop and light industrial applications where precise small-diameter clamping is required. How does the set improve machining quality? Consistent clamping and reduced runout from the supplied collets help improve concentricity and hole quality when using the Vertex V25000. Can the collets be stored ready for immediate use? The kit is organised for quick selection and storage, reducing search time and supporting efficient tool-change routines. What is the SKU for ordering this set? Order using SKU V25000; the set is listed under Vertex and identified by GTIN 4061905087035. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø10–34mm Collet Set, 12 Pieces Per Set - Vertex
Reliable workshop performance with precise Ø 10–34 mm clamping and a 12-piece configuration ensures consistent setup times and repeatable results. Combine robust concentricity with broad size coverage for efficient machining and reduced downtime. Order the Vertex V50000 collet set directly via Metav Werkzeuge or ask our consultants if needed. Vertex V50000 Collet Set – 12-piece, Ø 10–34 mm A Vertex V50000 collet set designed for secure concentric clamping of round tools and workpieces in general machining and workshop applications Precision concentric clamping for repeatability Diameter range Ø 10–34 mm for versatile use 12-piece set covering common diameters Manufactured by Vertex for proven reliability Consistent concentricity for repeatable machining The collets provide concentric clamping that reduces runout and supports consistent cutting results. By centring tools and workpieces with uniform radial pressure, setup variation is minimised and machining quality is stabilised. This effect is especially relevant when tolerance adherence is critical: tight concentricity leads to predictable part geometry and reduces the need for rework. The construction emphasises precision and repeatable holding force to maintain process stability during batch production. Practical range that improves throughput and flexibility Covering Ø 10–34 mm, the set accommodates common diameters used across many metalworking tasks and consolidates multiple sizes into a single kit. Fewer changeovers are required, which shortens machine downtime and streamlines tool management on the shop floor. The 12-piece configuration means typical intermediate diameters are available immediately, supporting efficient sequencing of operations and faster job changeovers for both small runs and medium-volume production. Durable design for workshop routines and quality assurance Manufactured under the Vertex name, the collets are intended for regular workshop use where dependable clamping and straightforward handling are needed. The design permits secure axial and radial retention without complex adjustments, promoting stable cutting conditions and longer tool life. Where traceability and process reliability matter, the set supports standardised work procedures and helps to maintain consistent output across shifts and operators. For technical advice or to reserve the Vertex V50000 collet set, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance and supply details Technical Data Article number: V50000 GTIN: 4061905095702 Brand: Vertex Facts Diameter range: Ø 10–34 mm Pieces per set: 12 ECLASS: 21022190 Special features Complete set of collets Set configuration: yes Packaging: set format FAQ What diameter range does the V50000 collet set cover? The V50000 collet set covers diameters from Ø 10–34 mm and is supplied as a 12-piece kit. How many collets are included in the set? The set contains 12 collets suitable for the specified diameter range. Is this collet set suitable for precision machining? Yes, the V50000 collet set is designed to provide concentric clamping and repeatable holding for precision-oriented workshop tasks. Who manufactures the collet set? The collet set is manufactured by Vertex and supplied under the Vertex V50000 designation. What is the article number and GTIN for ordering? Article number (SKU): V50000 GTIN: 4061905095702 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø2-20mm Collet Set For ER Collets, 18 Pieces - Vertex
Take advantage of the combination of precise clamping across Ø2–20 mm, an 18-piece configuration and proven Vertex build quality to secure consistent machining results; order the collet set directly via Metav Werkzeuge or ask our consultants if needed. Vertex V32000 Collet Set – 18-piece, Ø2–20 mm Vertex V32000 collet set for precision clamping across a wide diameter range, suited to general workshop and industrial fixtures Precision clamping Ø2–20 mm 18-piece set for broad diameter coverage Vertex quality for consistent repeatability Comprehensive kit for routine workshop use Consistent accuracy for repeatable results The 18-piece collet set delivers consistent, repeatable clamping across its Ø2–20 mm range, reducing tool runout and variation between runs. This translates into fewer rejected parts and less rework, supporting a steady production flow. The design focuses on secure gripping and even force distribution, which helps maintain concentricity during turning and drilling operations, even when used in mixed batches. Practical coverage that simplifies tooling decisions With a broad diameter span provided in a single 18-piece kit, the set minimises tool change complexity and inventory overhead. The assortment covers small to medium diameters commonly used in general machining, enabling quick selection and reduced setup time. The clear organisation of sizes in the set supports efficient workshop routines and helps maintain throughput during short production series and maintenance tasks. Integration into workshop processes and material versatility Although the set specification concentrates on diameter coverage and piece count, the configuration is designed for straightforward integration with existing chucks and spindles. The result is improved productivity through faster clamping cycles and reliable holding during turning and light milling tasks. For workshops requiring traceable components, the Vertex designation provides a recognised manufacturer reference, supporting procurement and equipment standardisation. Order the Vertex V32000 through Metav Werkzeuge in Emmerich for reliable stock availability and get personalised advice from our consultants at info@metav-werkzeuge.com Technical data Article number: V32000 GTIN: 4061905095689 Brand: Vertex Contents: Ø2–20 mm Facts Diameter range: Ø2–20 mm Pieces per set: 18 Set: Yes Special features Product type: Collet set SKU: V32000 Image file: v08000-main.jpg FAQ What diameter range does the set cover? The collet set covers diameters from Ø2–20 mm, supplied as an 18-piece assortment to span common workshop sizes. Is this set suitable for high-precision turning? Yes, the Vertex V32000 collet set is designed to improve clamping concentricity and reduce runout, supporting precision turning and consistent part quality. How many pieces are included in the kit? The kit contains 18 pieces, offering comprehensive coverage across the specified diameter range for flexible tooling needs. Can the set reduce setup and changeover times? A single, organised 18-piece set simplifies size selection and replacement, which can reduce setup time and streamline small-batch production. Does the set include identification for each size? Sizes are provided across the Ø2–20 mm range; the organised kit format supports quick identification and selection at the bench. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Ø3-26mm Collet Set, 23 Pieces - Vertex
Take advantage of precision clamping, a wide diameter range Ø3–26 mm and a comprehensive 23-piece set for reliable, repeatable machining results; order the collet set directly via Metav Werkzeuge or ask the consultants for detailed application advice. Vertex Collet Set V40000 – 23-piece, Ø3–26 mm A Vertex Collet Set V40000 designed for secure workpiece clamping across a broad diameter range, suitable for general workshop and production machining tasks. Wide clamping range Ø3–26 mm 23-piece set for versatile use Precision-ground collets for secure hold Vertex quality for industrial workshops Precision clamping for consistent machining results A collet system converts radial clamping force into firm, even contact around the workpiece, improving spindle concentricity and reducing run-out. The result is higher repeatability in drilling, reaming and light milling operations. With a wide diameter range Ø3–26 mm, the set covers many common tool and workpiece sizes, so changeovers are minimised and process stability is increased. The emphasis on precision supports tighter tolerances and fewer reworks. Reduced setup time through a complete, organised set The 23-piece composition of the set reduces the need for custom collets or frequent substitutions, streamlining setup routines on the shop floor. Fewer interruptions for tool changes mean better machine utilisation and improved throughput. Collets in the set are precision-ground, which aids rapid seating and consistent clamping force across the range. For production environments where cycle time and reliability matter, the organisational benefit of a complete set supports leaner workflows. Robust handling and predictable workshop performance Manufactured under the Vertex name, the collets are intended for routine industrial use and structured workshop applications. The set’s design focuses on repeatable clamping rather than ornamental features, so maintenance demands remain low and inspection intervals are straightforward. Combined with Metav Werkzeuge’s supply chain and quality filter in Emmerich, the overall offering enhances reliable supply and reduces the risk of downtime from missing standard clamping sizes. For procurement teams seeking dependable clamping performance, contact Metav Werkzeuge to secure the Vertex collet set V40000 and request application-specific guidance via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: V40000 GTIN: 4061905095696 Brand: Vertex Diameter range: Ø3–26 mm Pieces per set: 23 Facts Diameter range Ø3–26 mm Pieces per set: 23 GTIN 4061905095696 Special features Collet set for secure workpiece clamping Covers Ø3–26 mm with graduated collets Manufacturer: Vertex FAQ What applications suit this collet set best? This collet set is intended for general workshop and production clamping tasks where a broad diameter range and repeatable concentricity are required; the Vertex Collet Set V40000 covers common drilling and light milling operations. Is the set complete for routine shop use? Yes, the 23-piece composition of the Vertex Collet Set V40000 provides a comprehensive range of standard diameters to reduce the need for additional collets in everyday machining. How does the set improve machining accuracy? By providing precision-ground collets that ensure even radial clamping, the set helps to maintain spindle concentricity and reduce run-out during machining with the Vertex collets. Can the collets be used in both production and craft workshops? The design and scope of the set make it suitable for industrial workshops and skilled trades; the Vertex Collet Set V40000 supports repeatable results across a variety of workshop tasks. What identifiers should be used when ordering? Refer to the SKU V40000 or the GTIN 4061905095696 when placing orders for this Vertex collet set. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Precise, repeatable clamping for high-speed machining
Collets provide radial, 360-degree clamping that secures cylindrical tools and rod-shaped workpieces with outstanding concentricity and holding force. Designed from high-grade spring steel, these split clamping elements combine excellent runout accuracy with the grip required for vibration-reduced high-speed cutting (HSC) on modern CNC mills and turning centres.
How collets work and where they add value
The clamping principle relies on the radial elasticity of the split collet: when the collet is pushed into a tapered seat—either by tightening a nut in a collet chuck or by a pull stud and drawbar action—the slots constrict uniformly and the bore closes concentrically around the tool or workpiece. This uniform, full-circumference contact prevents pressure marks that occur with side clamping and ensures superior balance for demanding machining tasks. Typical applications include toolholding for end mills and twist drills, and direct spindle mounting for series turning using workholding collets such as 5C.
Practical benefits that improve shop performance
- Improved concentricity and runout for higher surface quality and longer tool life
- Uniform 360-degree force transmission, preventing shaft damage and reducing vibration
- Fast changeover and wide gripping ranges, reducing setup time and improving throughput
- Compatible with standard systems such as ER standard collets and 5C workholding solutions
- Suitable for high-speed cutting and applications requiring high dynamic balance
Metav: workshop precision made accessible
Metav combines decades of measurement and tooling expertise with a comprehensive range that simplifies procurement. Based in Emmerich, Metav operates as a quality filter for the European market and supports more than 48,000 customers. With over 250,000 products available, Metav supplies collets, collet chucks and complementary tooling from a single source—reducing supplier complexity and ensuring reliable delivery straight to the shop floor.
Technical data at a glance
- material: high-grade spring steel
- clamping principle: radial elasticity, split collet design
- force distribution: 360-degree force transmission
- compatibility: ER standard collets; steep taper and Morse taper chuck interfaces
- workholding types: toolholding collets, 5C workpiece collets, pull-stud/drawbar systems
- typical set content: collet range, collet chuck with taper, tightening wrench, protective storage case
- application: high-speed cutting (HSC), CNC milling, CNC turning, series bar turning
- advantages: reduced vibration, high dynamic balance, material-friendly clamping
FAQ
What are the main differences between ER collets and 5C collets?
ER collets are typically used for toolholding in collet chucks and offer a broad gripping range for taper-mounted chucks, while 5C collets are common as workpiece-holding collets for direct spindle mounting in lathes and fixture systems.
Can collets handle high-speed machining?
Yes. Collets made from high-grade spring steel, offering uniform clamping and excellent dynamic balance, are well suited to high-speed cutting (HSC) applications on modern CNC centres.
How does the 360-degree clamping benefit surface finish and tool life?
The full-circumference contact distributes clamping forces evenly, preventing localised deformation and vibration; this improves surface finish and extends tool life thanks to reduced runout and better balance.
Why choose Metav for collets and tooling?
Metav combines hands-on industry expertise with a broad product range and a strict quality filter in Emmerich, making it a dependable partner for procuring collets, collet chucks and associated tooling for professional workshops.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com