Precision collets for repeatable, high-speed clamping
Precision collets and collet chucks provide concentric, damage-free clamping of cylindrical tools and bar stock, ensuring outstanding runout and vibration control for modern CNC milling and turning. Designed from spring steel, these collets use radial elasticity to deliver 360-degree gripping force, which prevents shaft marks and enables vibration‑reduced high‑speed machining while shortening setup times. As a fundamental component in metalworking, collets excel in both toolholding and workholding applications, offering flexibility across ER‑style systems and pull‑type work collets. Key benefits include excellent concentricity, robust holding power and suitability for high‑precision serial production.
ER-40 Collet Set With MT-5 Taper Collet Chuck, 15 Pieces - Vertex
Take advantage of precision clamping, the ER-40 collet system and the close spindle fit of the MT-5 taper for reliable machining cycles; the complete 15-piece set ensures flexible size coverage while the robust construction supports consistent tool run-out. Order the set directly via Metav Werkzeuge or consult the specialists for application advice. V-435 ER-40 Collet Set with MT-5 Collet Chuck by Vertex The V-435 ER-40 collet set offers precision clamping for machining centres and drill spindles via an MT-5 taper, suited to general workshop and industrial setups. ER-40 collet system for secure clamping MT-5 taper shank for accurate spindle fit Complete 15-piece collet set Robust total weight of 6.9 kg Ensure repeatable precision with the ER-40 system The ER-40 standard is widely used where consistent concentricity and secure clamping are required. By employing a standardised collet system the set reduces axial and radial run-out compared with ad hoc chucks, which supports tighter tolerances and improved surface finish. For production environments this translates into fewer reworks and a steadier process capability, as the clamping mechanism delivers a uniform gripping force across the full range of supported diameters. Stable spindle interface via MT-5 taper A correctly matched taper is essential for stability under load. The MT-5 taper provides a solid mechanical interface between the collet chuck and the machine spindle, improving torque transmission and reducing vibration. This results in more predictable cutting behaviour and extended tool life. For operators and engineers, the combination of a matched taper and ER-style collets simplifies setup validation and contributes to measurable productivity gains on repetitive machining tasks. Workshop-ready set for flexible size coverage The set comprises fifteen collets arranged to cover a broad spectrum of clamping diameters, enabling quick changeovers for diverse component runs. Having a complete set at hand reduces machine downtime and streamlines job preparation. The configuration is particularly beneficial for small-to-medium batch work where frequent tool changes are common and where a compact, organised collet assortment improves workflow efficiency. Durable operation and straightforward upkeep Constructed for sustained workshop use, the assembly’s mass and build quality contribute to stable operation under interrupted cuts and heavy-duty sequences; the listed total weight of 6.9 kg reflects a robust assembly designed to stay seated securely in the spindle. Routine care—regular cleaning of the taper and collet bores, and inspection for wear—keeps concentricity within specification. When maintained, the system supports consistent machining results and reduces the likelihood of rejects caused by clamping errors. For Vertex quality and dependable clamping performance, contact Metav Werkzeuge in Emmerich for tailored advice and to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: V-435 GTIN: 4061905096006 Manufacturer: Vertex Core facts Collet system: ER-40 Taper: MT-5 Set: 15 pieces Weight: 6.9 kg Special features Complete collet assortment for varied diameters Solid construction for reduced run-out Suitable for milling and drilling spindle use FAQ What clamping standard does the set use? The V-435 set uses the ER-40 collet standard, which provides uniform clamping across supported diameters and helps maintain concentricity during machining. Which spindle taper is required for the chuck included in the set? The chuck is designed for an MT-5 taper interface, ensuring a tight mechanical fit between the spindle and the collet chuck. How many collets are included in the set? The set contains 15 collets, offering a wide range of clamping options for various workshop tasks. Is the assembly suitable for heavy-duty machining? The V-435 assembly features a solid build with a total weight of 6.9 kg, contributing to stable operation under demanding cutting conditions. Can the collet set improve machining accuracy? Yes, using the ER-40 collet system with a matched MT-5 taper reduces run-out and vibration, supporting improved dimensional accuracy and surface finish. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-40 Collet Set With MT4 Taper Collet Chuck 7pcs — Vertex
Take advantage of precise ER‑40 clamping together with an MT‑4 taper for fast, secure spindle mounting; the seven-piece set reduces changeover time and keeps tool runout low. Order the set directly via Metav Werkzeuge or consult our specialists for specification matching. V-432 ER‑40 collet set with MT‑4 taper by Vertex The V-432 is a precision ER‑40 collet set with an MT‑4 taper, designed for secure, repeatable clamping in milling and drilling applications ER‑40 collet system for high clamping accuracy MT‑4 Morse taper for secure spindle mounting 7-piece set covering common tool shanks Robust design suited to workshop conditions High-precision clamping that reduces rework The ER‑40 collet system is engineered to deliver consistent concentricity and minimal tool runout, which translates into improved surface finish and extended cutter life. As supplied in the V-432 set, the collets are matched to a single collet chuck, ensuring that clamping force is distributed evenly across the tool shank. This level of repeatability supports tighter tolerances in serial production and reduces time lost to part rework and inspection. Quick mounting and compatibility for diverse machines Fitted with an MT‑4 taper, the chuck is compatible with spindles and adaptors that accept the Morse taper standard, allowing straightforward installation and rapid changeover between operations. The design of the taper facilitates accurate axial positioning and reliable torque transfer, making the set appropriate for both light and moderate-duty machining tasks. The set format streamlines tool inventory by offering multiple collet sizes for common shank diameters. Durable construction for dependable workshop use The set is supplied as a compact kit, built to withstand routine workshop handling while maintaining functional precision. The mechanical design emphasises secure locking and wear resistance so that clamping performance remains stable over repeated cycles. By reducing unscheduled downtime through dependable holding power, the kit contributes directly to a more predictable production flow and cost-effective operation. Practical handling and maintenance to keep production moving Maintenance is straightforward: regular cleaning of the collet mating surfaces and inspection for wear preserves clamping accuracy and prevents deterioration in performance. The sectional design allows easy disassembly for debris removal and lubrication where appropriate. Clear labelling of the set components simplifies selection during tool changes, helping to accelerate workflows and maintain throughput in busy machining environments. For supply from Metav Werkzeuge in Emmerich and tailored advice on the Vertex V-432 ER‑40 collet set with MT‑4 taper, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-432 GTIN: 4061905095979 Eclass: 21022190 Manufacturer: Vertex Core specifications Weight: 4.6 kg Taper: MT‑4 Collet type: ER‑40 Pieces per set: 7 Special features Set with collet chuck and MT‑4 arbor Designed for secure, repeatable clamping SKU: V-432 FAQ What taper is used for mounting the chuck? The chuck in this kit uses an MT‑4 Morse taper for secure spindle mounting and accurate axial positioning. How many collets are included in the set? The V-432 set is supplied as a 7-piece kit, offering a range of commonly used collet sizes for ER‑40. Is the ER‑40 system suitable for high-precision work? Yes; the ER‑40 collet system included in the V-432 is designed to provide high concentricity and low tool runout for precision machining. Who manufactures the collet set? The set is produced by Vertex; the SKU for this kit is V-432 and it is marketed as a workshop-grade ER‑40 collet set. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-40 Collet Set With NT-40 Taper And Collet Chuck, 7-Piece Set - Vertex
Take advantage of ER-40 accuracy and the standard NT-40 taper for reliable, repeatable clamping in daily machining; the complete set and robust construction support continuous workshop use. Order the V-212 directly via Metav Werkzeuge or consult our advisors for compatibility guidance. V-212 collet set with ER-40 collets and NT-40 taper — Vertex The V-212 is a collet set designed for precision clamping in machine tools with an NT-40 spindle taper, offering standardised interface and consistent grip for general workshop and industrial applications. ER-40 collets for high-precision clamping NT-40 taper for secure spindle interface Complete collet set for versatile use Robust build, total weight approx. 5.2 kg Consistent, high-precision clamping for reliable production A collet system based on ER-40 technology provides precision clamping and excellent concentricity, which reduces runout and improves surface finish on turned or milled parts. The standard NT-40 taper ensures a well-known spindle interface compatible with many machine tool configurations, making integration straightforward. This results in better repeatability between tool changes and fewer rejects in serial production. Reduce setup time and maintain steady workflow Designed as a ready-to-use set, the assembly minimises changeover time and supports efficient tool handling on the shop floor. Faster clamping and predictable performance lead to shorter cycle times and less unplanned downtime, helping to keep throughput stable across batches. The combination of quick, repeatable clamping with standard interfaces contributes directly to operational productivity. Durable construction for everyday industrial demands Constructed to withstand regular workshop use, the set’s robust nature supports continuous operation without frequent replacement. The compact weight of 5.2 kg facilitates handling and storage while providing a solid, balanced unit for transport and mounting. Backed by the Vertex brand reputation, the assembly is suitable for routine clamping tasks where dependable performance is required; the SKU provides simple stock control for procurement teams. Contact Metav Werkzeuge today for tailored advice on NT-40 compatibility and to arrange prompt supply of Vertex precision clamping solutions from our Emmerich quality hub Technical data Article number: V-212 GTIN: 4061905095009 eClass: 21022190 Facts Weight: 5.2 kg Pieces per set: 7 Collet type: ER-40 Taper: NT-40 Special features Set supplied ready for installation Designed for shop-floor clamping tasks Standardised spindle interface for broad compatibility Brand: Vertex FAQ What materials is the collet set suitable for clamping? The V-212 collet set is intended for general clamping tasks; ER-40 collets offer reliable grip for a wide range of common workshop materials. Is the taper compatible with standard machine spindles? The assembly uses the NT-40 taper, a standard spindle interface that ensures compatibility with machines designed for that taper specification. How does the set support production efficiency? By providing repeatable precision clamping and a ready-to-use configuration, the set reduces changeover time and helps maintain steady cycle times on the production line. Can the V-212 be stocked and managed easily in procurement systems? Yes, the SKU V-212 and GTIN 4061905095009 simplify inventory control and ordering within established procurement workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-40 Collet Set With NT-40 Taper SK Shank, 23 Pieces - Vertex
The supplied product data contains conflicting information regarding the taper connection: the item is described as having an SK taper shank, while the specified taper field is NT-40. This discrepancy makes it unclear which taper standard should be applied to the product. To ensure accuracy and consistency in the product description, please clarify whether the correct taper standard is SK or NT-40. Resolving this issue is essential before a full and detailed product description can be produced, as the taper specification is a critical aspect of the product's technical details. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-40 Collet Set With NT-50 Taper SK Holder 23pcs - Vertex
Benefit from the combination of ER-40 precision collets and an NT-50 taper interface for secure, repeatable clamping; the 23-piece set (SKU V-217) delivers interchangeability and workshop-ready robustness. Order the collet set directly via Metav Werkzeuge or consult our specialists for application advice. Collet set V-217 — ER-40 collets with NT-50 taper by Vertex The Collet set V-217 provides precision clamping for NT-50 spindle interfaces and general workshop milling and drilling applications ER-40 precision collet system NT-50 taper mounting Complete interchangeable collet set Reliable industrial clamping solution Consistent concentric clamping for higher throughput The V-217 collet set is engineered around the ER-40 system, which prioritises concentricity and minimal runout to support fine machining tolerances. By using a standardised collet geometry, the clamping system improves repeatability between setups and reduces the risk of rework. This results in more reliable part quality during serial production and shorter inspection loops, contributing to measurable process stability on the shop floor. Secure NT-50 interface for stable setups A robust NT-50 taper provides the mechanical interface between spindle and chuck, ensuring stable transmission of torque and axial forces. The taper mounting reduces micro-movement under load, which is particularly beneficial during finishing passes and when using long-reach tooling. Clear matching of taper and collet type simplifies machine compatibility assessment and supports safe, vibration-resistant operation in both trade and industrial environments. Practical design for workshop efficiency Supplied as a complete set, the package offers rapid collet interchangeability and straightforward organisation for frequently changing tools. The compact arrangement and clear labelling of components speed up tool changeovers, cutting machine idle time and contributing to smoother production flow. Built for everyday use, the clamping system combines functional design with practical handling to keep changeovers predictable and fast. What operators gain in everyday use Operators and maintenance staff benefit from a modular clamping solution that reduces downtime and simplifies spare-part management. The set’s compatibility with standard ER-40 tooling makes replacement straightforward and supports a broad tooling inventory without special adapters. For workshops aiming to consolidate suppliers while maintaining accuracy, this collet solution offers a balance of versatility and dependable performance. Contact Metav Werkzeuge in Emmerich for detailed application guidance on the Vertex V-217 NT-50 / ER-40 collet set or to arrange direct supply from stock. Technical data SKU: V-217 GTIN: 4061905095054 Manufacturer: Vertex ECLASS: 21022190 Facts Weight: 9.8 kg Pieces per set: 23 Taper: NT-50 Collet type: ER-40 Special features Supplied as a set Includes collet chuck with NT-50 taper mounting ER-40 precision collets Product image available FAQ What collet system is included in the set? The set contains the ER-40 collet system as supplied in the Vertex V-217 package. Which taper does the chuck use? The chuck uses an NT-50 taper interface for spindle mounting. How many pieces are supplied with the set? The Vertex V-217 is supplied as a complete set with 23 pieces. Is the collet set suitable for production machinery? Yes, the ER-40 system combined with a NT-50 taper offers the stability and repeatability required in many production and trade applications. How does this set affect changeover times? Interchangeable ER-40 collets and a straightforward chuck interface reduce tool change complexity and shorten machine downtime. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-40 Collet Set With NT-50 Taper, 15 Pc Collets In Holder - Vertex
Take advantage of the combination of ER-40 precision, NT-50 SK taper compatibility and robust industrial construction for reliable toolholding and consistent production results. Order or enquire via Metav Werkzeuge for expert advice and fast delivery from a quality-controlled European stock. Collet set V-218 – ER-40 collets with NT-50 SK taper by Vertex The Collet set V-218 is a precision ER-40 collet chuck set with an NT-50 SK taper, intended for secure toolholding in milling machines and machining centres where repeatability and stable clamping are essential. ER-40 precision collets for concentric clamping NT-50 SK taper holder for secure spindle connection Complete set with assorted collet sizes Robust construction, industrial workshop grade Stable clamping for consistent machining performance A collet system designed for repeatable results reduces set-up time and rejects. The ER-40 collets included in this set provide precision concentric clamping that stabilises rotating tools and minimises runout during milling and drilling operations. Reduced runout supports tighter tolerances and improves surface finish, which in turn increases first-pass yield and lowers rework rates. The clear mechanical function of the clamping system makes it suitable for production runs as well as maintenance of prototype workpieces. Compatibility with NT-50 spindles and secure connection The NT-50 SK taper provides a standardised interface to many industrial spindles; the holder form ensures rigid contact and reliable torque transfer under load. This mechanical pairing enhances spindle stability and contributes to consistent tool engagement during heavier cuts. For workshops standardising on SK/NT tapers, the interface simplifies tool management and reduces the number of adapters required, supporting streamlined tooling workflows and predictable machining performance. Practical set composition for workflow efficiency Supplied as a complete set, the package reduces the need to source individual collets and supports quick tool changes during shift work. The assortment of collets enables flexible adaptation to a range of tool shank diameters, which simplifies inventory handling and shortens machine downtime caused by missing or incompatible holders. Clear labelling and standard ER-40 geometry make the set straightforward to integrate into existing tool stations and holders, improving shop-floor organisation and throughput. Durable design and workshop suitability Constructed for industrial environments, the components are intended to withstand regular handling and routine cleaning common in machining shops. The mechanical simplicity of the collet system limits the number of wear-prone parts and supports straightforward inspection routines. Supplied through Metav Werkzeuge’s quality-filtered European stock, the package benefits from a distributor approach that emphasises consistent quality and reliable supply chains for precision tools. For dependable ER-40 clamping with NT-50 compatibility, contact Metav Werkzeuge to secure the Vertex V-218 collet set and benefit from expert guidance and rapid dispatch from our Emmerich warehouse Technical data Article number: V-218 GTIN: 4061905095474 Manufacturer: Vertex Facts Weight: 8.5 kg Pieces per set: 15 Taper: NT-50 Collet type: ER-40 Special features Set: yes eClass: 21022190 SKU: V-218 FAQ What spindle taper is compatible with this set? The set is designed for an NT-50 SK taper connection; the V-218 collet set by Vertex fits spindles accepting NT-50 interfaces. Which collet form is included in the set? The V-218 comprises ER-40 collets and a collet chuck configuration matching ER-40 geometry for concentric clamping. How many pieces are supplied in the set? The Vertex V-218 is supplied as a complete set containing an assortment of ER-40 collets for workshop flexibility. Is the set suitable for production milling centres? Yes; the collet system and NT-50 holder are intended for use in milling machines and machining centres where stable toolholding and repeatability are required. Who is the manufacturer of this collet set? The collet set V-218 is manufactured by Vertex and distributed through Metav Werkzeuge; see the manufacturer details below for full information. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-50 Collet Set With MT-5 Taper Collet Chuck, 12 Pieces - Vertex
Take advantage of a robust combination of wide clamping range and straightforward spindle compatibility to maintain efficient tool changeovers and reliable runout control. The set combines ER‑50 collets with an MT‑5 taper chuck for universal mounting in standard spindles; order directly via Metav Werkzeuge or consult the specialists for application advice. Vertex ER‑50 Collet Set V‑437 — MT‑5 Taper Collet Chuck Kit The Vertex ER‑50 Collet Set offers precision workholding for milling and drilling spindles, featuring an MT‑5 taper collet chuck for secure mounting in standard machine tapers. ER‑50 system for robust clamping MT‑5 taper for standard spindle fit Complete set ensuring tool versatility Durable construction for workshop use Consistent precision for repeatable machining The ER‑50 clamping system is engineered for high concentricity and stable axial retention, making it suitable for demanding metalworking tasks where runout must be minimised. With an emphasis on mechanical reliability, the collets ensure tools are held concentrically during rotation, which reduces vibration and improves surface finish. The result is a measurable reduction in rework and more consistent part quality, particularly relevant for series production or high-precision one-off components. Highlighted here is the direct benefit of improved process yield from reliable clamping rather than abstract claims. Seamless compatibility and efficient integration Fitted with an MT‑5 taper, the chuck integrates with machines that accept Morse taper 5, providing a straightforward mechanical interface that simplifies tooling logistics. The set format supports a broad range of tool diameters available within the ER‑50 range, reducing the number of separate holders required on the shop floor. This helps to streamline tooling inventories and minimise changeover times, offering a clear operational advantage in mixed production environments. Compatibility-focused design means fewer adapters are needed, enabling faster set‑ups and reducing idle machine time. Built to withstand workshop conditions and support uptime Constructed for regular use in industrial workshops, the kit is conceived to resist everyday handling and maintain clamping performance over many cycles. The combination of the chuck and matched collets provides uniform contact pressure and wear distribution, which extends component life and preserves accuracy. Regular maintenance remains straightforward because the system uses standard replacement collets and widely understood assembly, so downtime is limited to planned intervals. For procurement managers and shop supervisors, the emphasis is on predictable service life and lower total cost of ownership rather than just initial acquisition. Contact Metav Werkzeuge in Emmerich for tailored advice or to request supply of the Vertex ER‑50 collet set V‑437; assistance is available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: V‑437 GTIN: 4061905096020 Manufacturer: Vertex Facts Weight: 9.5 kg Collet type: ER‑50 Taper: MT‑5 Pieces per set: 12 eClass: 21022190 Special features Collet chuck with MT‑5 taper Complete collet set included Designed for workshop use SKU: V‑437 FAQ What taper does the chuck use and which machines is it compatible with? The chuck uses an MT‑5 taper; the Vertex ER‑50 collet set V‑437 is compatible with machines that accept Morse taper 5 spindles. How many collets are included in the set? The set contains 12 pieces; the Vertex ER‑50 kit V‑437 is supplied as a complete collection of matched collets. Is the ER‑50 system suitable for high‑precision finishing operations? Yes, the ER‑50 system in this kit is designed to provide high concentricity and consistent clamping, supporting precision finishing when properly fitted. Can the set be used for rapid tool changes in a production environment? The matched chuck and collets permit efficient changeovers; the Vertex ER‑50 collet set V‑437 reduces the need for multiple holders and helps shorten set‑up times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-50 Collet Set With MT4 Collet Chuck, 12 Pieces — Vertex
Take advantage of a robust ER‑50 collet system combined with an MT‑4 taper for secure spindle mounting and consistent runout control; the set supports efficient tool changes and dependable production uptime. Order directly via Metav Werkzeuge or consult the Metav advisors for clarification. Collet Set V‑433 — ER‑50 Collets with MT‑4 Taper (Vertex) The Collet Set V‑433 is a precision toolholding kit for industrial lathes and milling spindles, supplying ER‑50 collets and a matching MT‑4 taper collet chuck for rigid mounting and repeatable clamping performance ER‑50 collet system for broad clamping range MT‑4 taper for secure machine spindle mounting Set contains 12 precision collets Robust construction, total weight 9 kg Reliable clamping for uninterrupted production The ER‑50 configuration delivers a high clamping force and low runout, which translates into improved machining accuracy and longer tool life. Designed for demanding workshop environments, the system keeps axial and radial movement to a minimum, supporting finer surface finishes and closer dimensional tolerances. The combination of precise collet geometry and firm seating in the taper reduces vibration and increases cutting stability, helping to maintain consistent piece-to-piece quality on serial production runs. Fast mounting and broad machine compatibility Fitted with an MT‑4 taper, the collet chuck offers straightforward mounting to compatible spindles, enabling rapid changeovers without complex adapters. The included chuck facilitates immediate installation on machines accepting Morse taper shanks, reducing setup times and easing integration into existing toolholding arrangements. Clear mechanical interfaces and standardised dimensions mean less downtime during tool changes, supporting faster throughput and predictable scheduling in the workshop. Built for workshop durability and dependable accuracy Manufactured by Vertex and supplied as a complete set, the system emphasises robustness and repeatability. The solid construction withstands routine handling and the mechanical stresses of production environments, offering a dependable basis for precision work. Routine maintenance is simple and quick, and the stable clamping behaviour preserves cutting-edge geometry and reduces premature tool wear. For technical clarification regarding suitability for a specific machine model or application, Metav’s consultants can provide tailored advice. Contact Metav Werkzeuge in Emmerich for expert guidance on the Vertex V‑433 collet set and reliable supply from our European stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V‑433 GTIN: 4061905095986 Manufacturer: Vertex Weight: 9 kg Taper: MT‑4 Collet type: ER‑50 Set: Yes Pieces per set: 12 Facts Weight: 9 Pieces per set: 12 GTIN numeric: 4061905095986 Special features ER‑50 collet system MT‑4 taper mounting Delivered as a complete set Manufacturer: Vertex FAQ What machines is the collet set suitable for? The collet set is designed for machines that accept an MT‑4 taper; the Vertex V‑433 with ER‑50 collets fits spindles and tailstocks compatible with that taper standard. How many collets are supplied with the set? The Vertex V‑433 set contains 12 precision collets supplied together with the matching collet chuck. Is the clamping system robust enough for serial production? Yes, the ER‑50 geometry and MT‑4 taper pairing provide stable clamping and low runout, making the set suitable for repetitive production tasks requiring consistent accuracy. What is the total weight of the complete set? The complete Vertex V‑433 set has a total weight of 9 kg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-50 Collet Set With NT-40 Taper Collet Chuck, 12 Pieces - Vertex
Take advantage of stable, high-capacity clamping and a rigid NT-40 taper connection to maintain production accuracy. The combination of ER-50 collets and a matched NT-40 collet chuck delivers repeatable concentricity and efficient tool changes. Order the Vertex collet set directly via Metav Werkzeuge or consult our specialists for application advice. Collet set V-213 — ER-50 collets with NT-40 taper (Vertex) The Collet set V-213 is a comprehensive ER-50 clamping solution with an NT-40 taper chuck, designed for secure tool holding in demanding workshop and industrial machining contexts ER-50 collets for high clamping capacity NT-40 taper for stable spindle connection Complete set with collet chuck included Robust construction for workshop use Secure and repeatable clamping for consistent parts The clamping system is engineered for precision: the ER-50 collets provide a large clamping range and high grip force, reducing slippage during heavy cuts. This results in improved repeatability and fewer rework cycles. The collet geometry supports uniform compression around the tool shank, which helps maintain concentricity and low runout, thus protecting cutting tools and improving surface finish. Rigid taper connection that stabilises machining A rigid taper interface is crucial under load. The NT-40 taper used for the chuck ensures a solid spindle connection that resists deflection and vibration during milling and drilling. By combining a proven taper standard with a matched collet chuck, the system increases cutting stability and allows longer tool life. Expect more consistent machining forces and enhanced process reliability when working with medium to heavy-duty operations. Faster changeovers and improved workflow efficiency Supplied as a set, the clamping solution reduces setup time and streamlines changes between tools and cutters. The included chuck facilitates straightforward insertion and removal of collet holders, which speeds up repeat operations on the shopfloor. Improved handling and fewer adaptors reduce inventory complexity and help maintain production uptime — a practical advantage in batch production and maintenance environments. Built for workshop durability and supported by Metav quality Manufactured by Vertex, the assembly is designed for continuous use in industrial settings and constructed to withstand routine handling. Sourced through Metav Werkzeuge, customers benefit from a European quality filter and reliable logistics from Emmerich. Metav’s experience and broad product range ensure accessible spare parts and consistent supply, supporting long-term operational stability and confidence in procurement decisions. Contact Metav Werkzeuge in Emmerich for detailed specifications or to request a quotation for the Vertex V-213 collet set with NT-40 taper Technical data Article number: V-213 GTIN: 4061905095016 Manufacturer: Vertex Core technical data Weight: 10 kg Taper: NT-40 Collet type: ER-50 Pieces per set: 12 Special features Set includes collet chuck with NT-40 taper Suitable for workshop clamping applications Brand: Vertex eClass: 21022190 FAQ What taper does the set use and is it industry standard? The set uses an NT-40 taper; the Vertex V-213 is designed for machines accepting NT-40 tapers and provides a secure spindle interface. Which collet size family is included in the set? The set is based on the ER-50 collet family, offering a wide clamping range and high clamping capacity suitable for larger shank diameters. How many collets are supplied in the set? The Vertex V-213 is supplied as a full set with 12 collets included for flexible workshop use. Is the system suitable for heavy-duty milling and drilling? Yes, the combination of a rigid NT-40 taper and ER-50 clamping makes the set appropriate for medium to heavy-duty machining where stability and low runout are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Morse taper adapter
Technische Daten: Bezeichnung: Morsekegelaufnahme Vollhartmetall Gewicht: 0,6 kg - 3,7 kg Aufnahme: MT-1 Kegel: NT40 Spannzangen Typ: MT2 - MT5 Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.
MT2 Morse Taper Arbor, For Collet Holders And Tooling - Vertex
Take advantage of the combination of a precision MT2 taper, robust construction and proven Vertex quality for reliable tool seating and steady machining results. Order the arbor directly via Metav Werkzeuge or consult the Metav team for application-specific guidance. VI-108 Morse taper arbor (MT2) — Vertex precision MT2 tool holder, stable 2.8 kg mass A VI-108 Morse taper arbor designed for secure tool mounting in turning and drilling applications, offering repeatable seating and compatibility with standard MT2 sockets. Precision-ground MT2 taper for reliable seating Solid construction with 2.8 kg mass Compatible with standard lathe and drill spindles Manufactured to Vertex quality standards Dependable seating and enhanced machining stability The VI-108 delivers a precision-ground MT2 taper that ensures consistent, concentric seating in matching sockets. This precision fit reduces runout and vibration, which directly improves surface finish and tool life. Because the arbor's mass contributes to stability during spindle rotation, operators can expect steadier cutting conditions compared with less substantial holders. The result is a measurable increase in process reliability and fewer rework cycles, making the tool holder a pragmatic choice for production and jobbing environments. Easy integration with existing workshop equipment The Morse taper principle relies on a tapered shaft creating a friction fit inside a matching socket; this simple mechanical interface allows quick installation and secure clamping without additional tooling. For workshops using standard MT2 spindles, the arbor slots straight into existing tool chains and is suitable for applications in lathes, drill presses and related fixtures. The design keeps set-up times short and supports fast tool changes, which benefits throughput in mixed-production and repair shops. For those unfamiliar with the concept, a Morse taper provides a self-locking connection that transmits torque and axial load through surface contact rather than threads or pins. Vertex quality for long-term reliability Manufactured under the Vertex name, the VI-108 is produced to deliver durability and consistent performance. Robust construction minimises deformation under load and reduces the need for frequent replacement, thus lowering total cost of ownership over time. Regular inspection of taper surfaces and simple cleaning after use maintain the accuracy of seating; routine care prevents contamination that would otherwise compromise the friction fit. With proven manufacturing controls and a focus on repeatability, the arbor supports continuous operation in industrial environments while helping to avoid unexpected downtime. Contact Metav Werkzeuge for tailored application advice or to arrange procurement of the Vertex VI-108 Morse taper arbor, with delivery and technical support available from our Emmerich location. Technical Data Article number: VI-108 GTIN: 4061905085680 Manufacturer: Vertex Weight: 2.8 kg Taper type: MT2 ECLASS: 21029015 Facts Mass: 2.8 kg ECLASS code: 21029015 Special features Morse taper arbor design MT2 compatibility Vertex manufacturing quality SKU VI-108 FAQ What type of taper does this arbor use? The arbor uses an MT2 taper; the VI-108 Morse taper arbor by Vertex is manufactured to fit MT2 sockets for secure friction seating. Can the arbor be used in both lathes and drill presses? Yes, the VI-108 is suitable for integration with standard lathe and drill spindles that accept MT2 tapers, enabling versatile use across workshop equipment. How should the taper be maintained to ensure accuracy? Clean taper contact surfaces and protect them from contamination; routine inspection preserves the precision seating of the VI-108 and extends service life. Is the VI-108 suitable for heavy-duty production environments? The Vertex VI-108 is built for robust daily use; its solid construction and precise taper make it appropriate for continuous operation in industrial settings. How does the arbor improve machining outcomes? By providing a precision MT2 fit and increased stability from its mass, the arbor reduces runout and vibration, improving surface finish and tool longevity. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT2 Morse Taper Holder For Tooling - Vertex
Take advantage of a precise MT2 interface and robust construction to ensure secure tool retention and consistent alignment in production. The combination of compatibility with standard spindles and a compact 1 kg design supports efficient set-up and reliable machining. Order the Morse taper holder VI-105 directly via Metav Werkzeuge or consult our specialists for application advice. Morse taper holder VI-105 — MT2 interface, compact 1 kg design (Vertex) The Morse taper holder VI-105 is a precision clamping solution for integrating Morse taper tooling into standard drilling and machining spindles, designed for workshop and light industrial environments. *Precision MT2 interface for wide compatibility *Secure tool retention for repetitive machining *Industrial-grade manufacturing for long service life *Compact 1 kg design for easy handling and installation Improved process reliability through standardised clamping The MT2 interface offers a widely accepted connection that simplifies tool changes and reduces adapter inventory. By using a standardised taper mounting, the holder brings repeatable alignment to repetitive operations and short series production. This reduces setup time and supports more predictable cycle times on the shop floor. The compact mass of around 1 kg minimises additional spindle load while remaining robust enough for everyday workshop use. Seamless integration with existing spindles and tooling Designed to mate with conventional Morse taper tooling and common spindle noses, the arbor supports straightforward retrofitting without the need for special adapters. The precise taper geometry promotes reliable centring and helps maintain tool runout within practical tolerances for routine drilling and reaming tasks. Clear compatibility with common toolholders means fewer interruptions and easier planning of tooling requirements in mixed-production environments. Built for durability and consistent performance Manufactured under Vertex quality standards, the holder features industrial-grade construction aimed at long service intervals and low-maintenance operation. The design emphasises stable clamping and resistance to wear in standard machining conditions, contributing to dependable part quality and reduced downtime. Combined with Metav’s supply reliability and quality control, the component is suitable for workshops that prioritise trustworthy sourcing and predictable availability. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the VI-105 into production, or request complementary technical information from our consultants at info@metav-werkzeuge.com Technical data SKU: VI-105 GTIN: 4061905086168 Manufacturer: Vertex Data Weight: 1 kg ECLASS: 21029015 Special features Interface: MT2 taper Category: Clamping / taper holder Brand: Vertex FAQ What materials is the holder suited for? The holder VI-105 is a mechanical taper adapter; material suitability depends on the selected cutting tool and machining parameters rather than the holder itself. How does the MT2 interface affect tooling compatibility? The MT2 taper on the VI-105 matches standard MT2 tooling and spindles, enabling direct integration with commonly used Morse taper tools and reducing the need for specialty adapters. Is the product ready for immediate installation? The VI-105 is supplied as a ready-to-install taper holder; preparation is limited to standard cleaning and checking of mating surfaces before assembly. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT3 Morse Taper Adapter, 0.77 kg, Collet Socket – Vertex
Take advantage of a reliable MT3 interface and compact 0.77 kg design for consistent toolholding and straightforward changeovers; benefit from Vertex engineering and traceability for uninterrupted production. Order the VI-103 Morse taper arbor directly via Metav Werkzeuge or ask the Metav consultants for a compatibility check. VI-103 Morse taper arbor (MT3) — Vertex The VI-103 Morse taper arbor is a precision toolholder designed to provide a secure taper interface for machine spindles that accept an MT3 taper, suitable for standard workshop and production environments. MT3 taper interface for standard spindles Compact design, weighs 0.77 kg Vertex-manufactured industrial component Consistent centring and torque transmission for reliable machining A Morse taper works by a conical fit that transmits axial and torsional forces through friction and precise contact. The MT3 designation identifies the taper size and ensures compatibility with spindles and accessories specified for that standard. This design minimises runout and contributes to stable cutting conditions, making the arbor a dependable choice when consistent concentricity and repeatable positioning are required. The result is fewer setup iterations and more predictable process control. Compact, easy-to-handle form that aids quick changeovers Weighing 0.77 kg, the arbor presents a compact solution for tool changes and handling in busy workshops. Lower mass simplifies manual handling and reduces the effort during tool swaps, while the taper interface keeps alignment accurate without additional fixtures. The construction supports efficient workflow by enabling faster insertions and removals of tapered tooling, which can shorten machine idle times and support higher utilisation rates across production shifts. Traceability and industrial sourcing for production peace of mind Marked as VI-103 and carrying a clear product identifier, the arbor supports traceability within procurement and inventory systems. The association with Vertex underlines industrial sourcing and manufacturing standards commonly requested in production environments. Metav’s role as a European quality filter complements this, with decades of product range and logistics that help maintain reliable supply to the workshop and reduce vendor complexity for purchasing departments. Contact Metav Werkzeuge in Emmerich for a compatibility check of the MT3 arbor or to request a tailored recommendation from our consultants: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: VI-103 GTIN: 4061905085192 Manufacturer: Vertex Core specifications Weight: 0.77 kg eClass: 21029015 Taper type: MT3 Special features Morse taper interface for standard toolholders Vertex-manufactured component Product image available (vi-102-main.jpg) FAQ What taper size does this arbor use? The arbor uses an MT3 taper, which is the Morse taper size specified for this product and compatible with equipment designed for MT3 interfaces. Is the VI-103 suitable for production tooling changeovers? Yes, the VI-103 Morse taper arbor is designed for repeatable toolholding and straightforward changeovers thanks to its tapered fit and compact mass. How is the product identified for inventory and procurement? This component is listed as VI-103 with GTIN 4061905085192, facilitating catalogue and inventory tracking. Who manufactures this arbor? The arbor is manufactured by Vertex, an established producer of industrial toolholding components. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT3 Morse Taper Arbor For Tool Holding - Vertex
Take advantage of a secure MT3 taper, a precision fit and a compact 1.2 kg mass to improve spindle reliability and reduce setup time. Order the component via Metav Werkzeuge or consult the Metav specialists for application-specific advice. Morse taper adaptor VI-106 – MT3, compact 1.2 kg, Vertex The Morse taper adaptor VI-106 is a compact clamping component for machine spindles, designed to provide stable tool seating and straightforward handling in workshop environments. Secure MT3 taper for reliable clamping Robust construction for workshop use Compatible with standard machine spindles Compact 1.2 kg weight for easy handling Dependable spindle connections that reduce downtime The MT3 taper delivers a precision fit that ensures consistent centring and axial alignment when inserted into compatible spindle sockets. A stable connection minimises runout and vibration during operation, which in turn protects cutting tools and workpieces and extends tool life. Emphasis on mechanical accuracy translates directly into fewer tool changes and less machine downtime, supporting a more efficient production flow while maintaining process stability. Practical handling and clearer setup routines At 1.2 kg, the adaptor remains easy to handle during tool changes and workshop organisation. The compact mass simplifies manual insertion and extraction, reducing physical strain in repetitive workflows. Clear, repeatable seating reduces the need for trial adjustments after each changeover, saving time and improving consistency across batches. These operational advantages contribute to shorter set-up times and increased throughput on small to medium production runs. Technical compatibility explained for straightforward selection The MT3 designation refers to the Morse taper size, commonly used for arbors and tailstocks in conventional and CNC-equipped lathes and milling spindles. A Morse taper adaptor functions by wedging into the spindle socket to form a tight, self-locating connection that transmits torque and axial loads. When selecting a taper, ensure the spindle accepts MT3 tapers; the VI-106 is tailored to that standard, providing predictable mechanical behaviour and easy interchangeability with other MT3 tooling systems. Quality sourcing and service philosophy that supports every workshop Metav stands for democratisation of precision: precision components are made accessible for every workshop without compromising on quality assurance. With more than 48,000 satisfied customers and a catalogue exceeding 250,000 items, Metav provides a dependable supply chain from its European hub in Emmerich. Choosing components distributed through Metav adds a layer of quality filtering and logistical reliability to procurement, which is especially valuable for procurement managers and workshop supervisors seeking consistent part quality. For a reliable spindle interface choose the Vertex VI-106 through Metav Werkzeuge — request further technical details or order directly from Metav Werkzeuge’s specialists to ensure the MT3 taper matches the intended machine application. Technical data Article number: VI-106 GTIN: 4061905087202 Manufacturer: Vertex Core specifications Weight: 1.2 kg ECLASS: 21029015 Features Designation: Morse taper adaptor Collet type: MT3 SKU: VI-106 FAQ What taper size does the adaptor use? The adaptor uses an MT3 Morse taper; the VI-106 by Vertex conforms to the MT3 standard for compatible spindle sockets. How heavy is the adaptor and how does that affect handling? The adaptor weighs 1.2 kg, which keeps manual handling straightforward while providing enough mass for stable seating during machining. Which machines is the adaptor suitable for? The adaptor is intended for machines that accept MT3 tapers; it is suitable for conventional lathes and milling spindles that use this taper size. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT3 Morse Taper Arbor For Toolholding, 2.7 kg - Vertex
Robust MT3 Morse taper holder delivering secure clamping and consistent concentricity for demanding turning operations; benefit from stable tool retention and compact mass for improved machining repeatability. Order the VI-109 Morse taper holder directly via Metav Werkzeuge or ask our consultants if needed. VI-109 Morse taper holder (MT3) by Vertex — secure clamping, precision runout The VI-109 Morse taper holder is a precision lathe accessory designed to provide reliable toolholding in MT3 spindles, suitable for turning and drilling setups where repeatable concentricity and stable machining are required. MT3 compatibility for standard lathe spindles Engineered for precision concentricity and runout Robust 2.7 kg body for stable heavy‑duty machining Manufactured by Vertex for industrial reliability Stable toolholding for consistent machining results The holder delivers a stable interface between spindle and tool, translating into consistent concentricity and reduced vibration during machining. With an MT3 taper connection, the component ensures standardised mounting in compatible spindles, supporting repeatable positioning of cutting tools and accessories. The design focuses on reliable tool retention, which reduces interruptions from re‑setting and helps maintain process stability across batches. Reduced setup time and improved process reliability A secure taper fit and engineered contact geometry contribute to faster, more predictable set‑ups. The resulting decrease in required adjustment time supports higher throughput and fewer quality deviations, an advantage for production environments seeking measurable gains in efficiency. The combination of precise alignment and sturdy construction helps avoid costly rework and supports predictable cycle times in everyday workshop routines. Built for industrial workshop conditions The unit’s compact mass and balanced geometry give it the inertia needed to support heavy‑duty turning tasks while keeping runout low. This contributes to smoother surface finishes and extends tool life through reduced chatter. Where machine stability and repeatability matter, the holder’s compact yet robust build gives confidence that tooling remains correctly aligned under typical loading conditions encountered in industrial turning operations. Compatibility, inspection and lifecycle considerations Designed for MT3 interfaces, the component integrates with a broad range of conventional lathes and tooling systems that accept a Morse taper 3 connection. Routine inspection of taper contact faces and correct seating remains a simple preventive measure to sustain performance; spare parts or replacements can be sourced via authorised distribution channels. The VI-109 is positioned as a practical choice for workshops seeking dependable retention without complex maintenance regimes. For procurement or technical clarification on Vertex MT3 toolholding solutions, contact Metav Werkzeuge to discuss compatibility and delivery options. Technical Data Article number: VI-109 SKU: VI-109 GTIN: 4061905086366 Manufacturer: Vertex Facts Weight: 2.7 kg Clamping/interface type: MT3 ECLASS: 21029015 Special features Suitable for MT3 spindles Optimised for reduced runout and stable tool retention Intended for lathe and turning applications Brand: Vertex FAQ What spindle interfaces is this holder compatible with? The VI-109 Morse taper holder is compatible with MT3 spindle interfaces and is intended for machines accepting a Morse taper 3 connection. Is the holder suitable for heavy‑duty turning? The VI-109, manufactured by Vertex, features a compact, robust 2.7 kg body designed to support stable heavy‑duty machining where improved runout performance is required. How does the design help reduce tooling issues? By providing a secure taper fit and optimised contact geometry, the holder improves concentricity and reduces vibration, leading to fewer setup adjustments and extended tool life. Are replacement parts or spares available from the manufacturer? Replacement components and spares can be obtained through authorised Vertex distribution channels; Metav Werkzeuge can assist in sourcing genuine parts for the VI-109. What routine checks keep the holder performing reliably? Regular inspection of the taper seating surfaces and correct mounting practice are recommended to maintain the VI-109’s performance and ensure consistent toolholding. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT4 Morse Taper Adapter, Heavy-Duty Toolholder 3.2kg - Vertex
Take advantage of robust, industrial-grade clamping and consistent repeatability for reliable machining operations; the combination of MT4 compatibility and a solid 3.2 kg construction supports stable spindle connections and reduced vibration. Order the morse taper arbor directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Morse taper arbor VI-110 (MT4) by Vertex — Precision clamping, 3.2 kg The Morse taper arbor VI-110 is a purpose-built clamping adapter for machining spindles and toolholders, engineered to transfer torque and hold tooling securely in industrial settings. Precision ground MT4 taper for secure clamping Robust 3.2 kg construction for stable spindle connection Suitable for a wide range of toolholders and arbors Manufactured by Vertex for industrial reliability Stable machining through heavy-duty build and connection quality The heavy construction and balanced mass of this arbor provide a stable connection between spindle and tooling, which helps to minimise chatter during cutting operations. Weighing 3.2 kg, the component contributes to consistent dynamic behaviour in medium- to heavy-duty tasks, improving process reliability when used with MT4 tooling. The robust design reduces the need for frequent re‑adjustment, leading to fewer interruptions on the shop floor and a predictable production rhythm. Clear mechanical coupling ensures transfer of torque without slippage, supporting higher feed rates while maintaining part quality. Accurate taper geometry for repeatable clamping and concentricity Designed with a precision ground taper, the arbor ensures repeatable axial alignment and reliable clamping force. Proper taper engagement reduces runout and supports concentricity between the spindle and the cutting tool or measuring mandrel. This geometric accuracy is critical for operations that demand close tolerances, as it limits off-centre motion and helps maintain surface finish and dimensional compliance across batches. The hardened, accurately finished contact surfaces provide consistent seating, which is essential for predictable machining results. Broad compatibility with standard toolholders and machine spindles Compatibility with the MT4 interface makes this arbor suitable for a wide range of toolholders, extension arbors and adapters commonly used in workshop and industrial environments. The standardised taper dimension supports quick identification and interchangeability within existing setups, simplifying tool inventory management and reducing downtime when changing tooling systems. Integration into established tool chains is straightforward, enabling safer retrofit and flexible use across multiple machines where MT4 is the accepted interface. Built for long-term serviceability and workshop efficiency Constructed to industrial standards and produced by Vertex, the arbor focuses on longevity and low-maintenance operation. The solid build reduces the frequency of replacements and supports predictable life cycles in continuous production. Routine inspection of taper seating and cleaning of contact surfaces will preserve performance; when inspected and maintained, the arbor contributes to a lower total cost of ownership through fewer unplanned stoppages. The straightforward mechanical design also makes it easy to incorporate into preventive maintenance schedules. For tailored advice on integrating the Vertex Morse taper arbor VI-110 into existing setups, or for assistance with compatibility and ordering, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930; Metav’s consultants will advise on technical fit and logistics. Technical Data Article number: VI-110 Manufacturer: Vertex GTIN: 4061905086656 Core data Weight: 3.2 kg Taper type: MT4 Special features Product name: Morse taper arbor Category: Clamping technology SKU: VI-110 FAQ What taper standard does this arbor use? The arbor uses an MT4 taper, a standard Morse taper interface suitable for many industrial toolholders and spindle configurations. Is the arbor suitable for heavy-duty machining? The 3.2 kg mass and robust construction of the Vertex arbor support stable connections for medium- to heavy-duty processes, offering improved vibration damping and consistent torque transfer. How does the taper design affect machining accuracy? A precision ground taper ensures repeatable seating and reduced runout, which supports concentricity and helps maintain tight dimensional tolerances during production. Can the arbor be used with existing MT4 tool inventories? Yes. The arbor is compatible with standard MT4 toolholders, enabling straightforward integration into established tooling systems and simplifying changeover. What routine maintenance is required? Regular cleaning of the taper contact surfaces and inspection for nicks or wear preserves seating quality and prolongs service life; the Vertex arbor is designed for straightforward inspection and upkeep. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT4 Morse Taper Holder 40mm Shank - Vertex
Reliable spindle-to-tool connections are essential for consistent machining: the Vertex VI-107 combines MT4 compatibility with a compact 1.5 kg construction to support stable tool holding and straightforward integration into standard setups. Benefit from improved centring and handling characteristics that contribute to repeatable results. Order the Morse taper holder directly via Metav Werkzeuge or ask our consultants if needed. Morse taper holder VI-107 (MT4) by Vertex — compact 1.5 kg arbor A Morse taper holder VI-107 engineered to provide secure MT4 tool retention for workshop and industrial machining applications MT4 compatibility for standard tooling Robust construction, compact 1.5 kg mass Precise centring for repeated setups Simple integration into lathe or spindle Stable clamping for consistent machining results The combination of an MT4 interface and a balanced mass delivers stability at the spindle end, reducing micro-movement during cutting and supporting repeatability across multiple setups. As a taper arbor, the component centres workpieces and cutting tools by form fit rather than friction alone; this mechanical fit is why a correctly selected taper holder offers reliable alignment without elaborate adjustment. The VI-107’s compact mass contributes to a predictable dynamic behaviour, which is particularly relevant for medium-duty turning and drilling tasks where consistent centre alignment matters. Practical handling that speeds setup and turnover A simple, standardised connection such as MT4 reduces changeover time and simplifies inventory management when multiple machines use the same taper series. The holder’s design enables quick insertion and withdrawal from the spindle by conventional methods, so fixtures and tooling can be exchanged with minimal interruption to the production flow. For workshops aiming to streamline routine operations, the result is higher uptime and fewer alignment checks between cycles, translating technical compatibility into daily operational efficiency. Built for workshop life and integration into tooling systems Produced under the Vertex name, the VI-107 is intended for straightforward integration into existing tool chains and collet systems that accept MT4 arbors. The design focusses on core mechanical function rather than superfluous features, helping to sustain long-term serviceability in a busy environment. Paired with Metav Werkzeuge’s role as a precision partner, this taper holder fits into a broader offering that emphasises dependable supply and tailored advice for industrial and craft workshops alike. Choose the Vertex VI-107 for secure MT4 toolholding and contact Metav Werkzeuge for personalised ordering and technical guidance Technical data SKU: VI-107 GTIN: 4061905086083 Eclass: 21029015 Manufacturer: Vertex Facts Weight: 1.5 kg Collet standard: MT4 Special features Compatible with MT4 collet systems Brand: Vertex General use: spindle-to-tool taper connection FAQ What machines is this taper holder compatible with? The VI-107 Morse taper holder is designed for spindles and chucks that accept MT4 arbors and integrates with standard lathes and milling spindles that use the MT4 interface. Is the VI-107 suitable for precision work? The Vertex VI-107 provides stable mechanical centring and supports repeatable setups; it is suitable for tasks that require consistent alignment rather than ultra-fine tolerance metrology. What is the weight of the taper holder and why is that important? The taper holder weighs 1.5 kg; this compact mass helps to moderate dynamic behaviour at the spindle and contributes to consistent clamping and predictable performance during machining. How is the taper holder mounted and removed? The Morse taper is engaged and withdrawn by standard spindle procedures for MT4 arbors; no additional assembly is required beyond conventional insertion and securing methods. Which identifiers should be used when ordering or checking compatibility? Use the SKU VI-107, the GTIN 4061905086083 and the MT4 specification to verify compatibility with existing tooling systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
MT5 Morse Taper Adapter, Heavy Duty Toolholder - Vertex
Combining secure MT5 clamping, a balanced 3.7 kg mass and Vertex build quality delivers steady tool holding and improved process stability; order the VI-111 via Metav Werkzeuge or consult our specialists for integration advice Morse taper arbor VI-111 — MT5 collet interface, 3.7 kg (Vertex) the Morse taper arbor VI-111 is a clamping adapter designed for workshop and industrial setups where robust, MT5-based tool holding is required MT5 collet interface for secure clamping Robust, balanced 3.7 kg construction Precision ground Morse taper shank Vertex manufacture for industrial reliability Steady clamping for more consistent machining results A well-engineered clamping solution reduces variability in everyday machining. The combination of a Morse taper seating and an MT5 collet interface provides secure clamping that translates into more consistent tool position and repeatable results. For operators and procurement teams, this means fewer re‑setups and a lower risk of tool slippage during operation. The design focuses on practical reliability rather than unverified claims, making it suitable for routine use in production and maintenance tasks where stable tool retention is a priority. Mass and balance that damp vibration and support surface quality The unit’s 3.7 kg mass contributes to damping of minor vibrations that can otherwise affect surface finish and dimensional stability. A heavier, well-balanced holder helps to absorb cutting forces and reduces the tendency for chatter in many ordinary machining situations. This physical stability is beneficial when short runs or finishing cuts demand consistent contact between tool and workpiece. The result is a tangible improvement in process stability without requiring changes to cutting parameters or machines. Workshop compatibility and straightforward specification for procurement Compatibility with MT5 collets makes this arbor straightforward to integrate with established clamping systems. Identification via SKU VI-111 and GTIN 4061905085239 simplifies ordering and inventory management. The product is manufactured by Vertex, a recognised name for industrial tooling, which aids traceability and quality expectations. Technical teams will appreciate the clear specification references that link the component to established supply chains and spare‑parts planning, while purchasing benefits from an easy match to existing collet sets and toolholder practices. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex tooling and to arrange supply of the VI-111 Morse taper arbor through our specialists Technical Data Article number: VI-111 GTIN: 4061905085239 Manufacturer: Vertex Weight: 3.7 kg Collet type: MT5 Facts Weight: 3.7 kg eClass: 21029015 GTIN: 4061905085239 Special features Type: Morse taper holder Compatible with MT5 collets Manufacturer: Vertex FAQ What is the primary function of this arbor? The arbor is intended as a Morse taper clamping adapter for secure tool holding; the VI-111 is used where MT5 collet retention and stable seating are required. Which collets and systems is it compatible with? Compatibility is with MT5 collets; integration depends on the existing collet set and machine taper arrangement in the workshop. How does the 3.7 kg weight affect machining performance? The 3.7 kg mass helps to damp small vibrations and stabilise the holder during cutting, which can improve surface finish and repeatability in many standard machining tasks. How can authenticity be verified? Check the manufacturer and identifiers: Vertex as the manufacturer, SKU VI-111 and GTIN 4061905085239 serve as reference points for authenticity and procurement Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-30 ER-25 Collet Set 7pcs With Collet Chuck SK30 - Vertex
Benefit from secure ER-25 clamping and the NT-30 taper interface for dependable tool holding across small-batch and production environments; the seven-piece set ensures quick changeovers and consistent results. Order the Vertex collet kit directly via Metav Werkzeuge or consult the Metav team if further assistance is required. Collet set with ER-25 collets and NT-30 taper (Vertex V-223) Collet set for secure tool holding and versatile spindle compatibility in workshop and production use ER-25 collets for standard clamping NT-30 taper for SK spindle interfaces Complete seven-piece set for versatile diameters Robust construction, 2.8 kg set weight Consistent clamping for repeatable part quality The ER-25 clamping system is designed to provide a concentric, reliable grip that supports repeatable tool positioning and stable machining dynamics. By securing the tool shank with uniform radial pressure, the solution reduces micro-movement under load, which helps to lower scrap rates and minimise rework. This benefit is particularly relevant for small-batch production and precision jobbing where dimensional consistency and tool life are critical for throughput and cost control. Quick integration into NT-30 spindle interfaces Compatibility with the NT-30 taper ensures straightforward integration into compatible SK-style spindle noses, reducing set-up time during tool changes. The kit, listed as V-223, brings a practical balance of interchangeability and mechanical stability, enabling faster changeovers on CNC milling and drilling equipment. The result is improved machine uptime and a simpler parts flow: fewer interruptions, fewer alignment checks and a steadier production rhythm. Workshop-ready assortment with proven provenance Supplied as a seven-piece collection, the set offers a compact range of clamping diameters suitable for common tooling requirements; the assembled kit weight of 2.8 kg makes storage and handling straightforward. Built under the Vertex name, this assortment is intended for everyday industrial use where durability and straightforward handling matter. Delivered through Metav Werkzeuge’s quality filter in Emmerich, the equipment arrives ready for immediate deployment on the shop floor, supporting a dependable supply chain for precision workshops. Choose the Vertex V-223 collet set with ER-25 clamping and NT-30 compatibility — contact Metav Werkzeuge in Emmerich for procurement and expert advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: V-223 GTIN: 4061905095504 Manufacturer: Vertex Weight: 2.8 kg Taper: NT-30 Facts Pieces per set: 7 Clamping type: ER-25 Eclass: 21022190 Special features ER-25 collets included NT-30 SK taper interface Supplied as a complete set FAQ What taper interface does the set use? The Vertex V-223 collet set uses an NT-30 taper suitable for SK-style spindle interfaces. Which collet type is included in the kit? ER-25 collets are included, providing a compact and widely used clamping range for general machining tasks. How many pieces are supplied in the set? The kit is supplied as a seven-piece set for flexible coverage of common tool diameters. Is the set suitable for production use? Yes, the set is designed for workshop and light production environments where consistent clamping and quick changeovers improve productivity. What is the weight of the complete set? The complete set weighs 2.8 kg, making it convenient to store and transfer within the workshop. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-40 ER25 Collet Chuck Set With Collets, 15-Piece — Vertex
Combine the ER-25 collet system and NT-40 taper for consistent, repeatable toolholding; choose the V-226 set for compact integration and reliable workshop performance. Order the collet set directly via Metav Werkzeuge or ask our consultants for tailored advice. Collet set V-226 — ER-25 collet system with NT-40 taper (Vertex) The Collet set V-226 is a collet and chuck set designed for NT-40 taper toolholders, delivering stable clamping and straightforward integration into standard machining setups. ER-25 collet system compatibility NT-40 taper shank for secure mounting Precision toolholding for workshop use Consistent clamping for reliable machining The ER-25 configuration provides a uniform clamping range that supports accurate concentricity and precision across repeated setups. The collar-and-nut style of the system ensures radial force is distributed evenly, which reduces wobble and improves surface quality during milling or drilling operations. For production environments, this consistency translates into fewer rejects and more predictable process outcomes. Stable interface with NT-40 taper spindles Using the NT-40 taper as the interface guarantees a rigid mechanical connection to the spindle, improving torque transmission and reducing risk of slippage under load. The combination of taper and collet creates a compact, concentric assembly that benefits both manual tool changes and automated toolchangers. Improved mechanical stability supports longer uninterrupted runs and steadier machining results. Simple compatibility and integration The toolholding configuration suits common machining centres and compact CNCs that accept NT-40 tapers, allowing quick adoption without extensive adapter inventories. The ER series design works with a broad range of cutter shank diameters, making this solution flexible for workshops that handle varied tasks but prefer a single collet standard for stock management and set-up efficiency. Why accurate toolholding reduces cost and rework A secure, low-runout clamping system reduces vibrations and micro-movements at the cutter tip, directly influencing tool life and finish quality. Less variation in tool position means fewer measurement checks and shorter cycle-time variability. Over time, these effects improve throughput and lower per-part costs while maintaining the tight tolerances required in precision machining. Operational advantages and maintenance considerations The modular nature of the collet system simplifies replacement of wear parts and routine inspection; cleaning debris from the taper and collet bore prevents scoring and preserves clamping accuracy. Lightweight handling and compact dimensions make the assembly practical for busy shop floors. The set’s balance between rigidity and versatility supports both intermittent and continuous machining tasks. Suitable applications and typical use cases Ideal for shops performing milling, drilling and reaming operations where repeatability and quick tool changes are important. The system suits both one-off prototyping and small-batch production, offering a practical compromise between universal holders and specialized shrink-fit tooling. As a Vertex product, the set aligns with standard workshop practices and established toolholding strategies. For dependable ER-25 toolholding from Vertex, contact Metav Werkzeuge in Emmerich to arrange purchase or technical advice — Metav Werkzeuge provides local stock and application guidance via email info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical Data Article number: V-226 GTIN: 4061905095801 Manufacturer: Vertex Facts Taper: NT-40 Collet type: ER-25 Weight: 3 kg Special features Set configuration: yes Pieces per set: 15 Category: Vertex FAQ What taper does this collet set use? The collet set V-226 uses an NT-40 taper as the spindle interface, providing a rigid connection suitable for many machining centres. Which collet standard is included in the set? The set is based on the ER-25 collet standard, offering a versatile clamping range for common cutter shank sizes. Is the V-226 suitable for CNC machining? Yes, the V-226 from Vertex is suitable for CNC applications where NT-40 spindles are used and consistent toolholding is required. How does the collet design affect finish and tool life? Uniform clamping with the ER-25 system reduces runout and vibration, which improves surface finish and can extend tool life under stable cutting conditions. Can the set be integrated into existing toolholder inventories? The ER-25/NT-40 combination is compatible with standard NT-40 toolholders, facilitating integration into typical workshop inventories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-50 ER-40 Collet Set With SK Shank, 7 Pieces - Vertex
Secure consistent clamping accuracy by combining the ER-40 collet standard with an NT-50 taper chuck in a compact set of seven pieces. The configuration supports dependable concentricity and straightforward retrofit, making it a practical choice for everyday workshop milling tasks. Order the V-219 collet set directly via Metav Werkzeuge or ask our consultants if needed. V-219 Collet set with NT-50 taper and ER-40 collets — Vertex The V-219 is a collet set supplied with an SK-compatible holder for an NT-50 taper, intended for reliable tool clamping and quick changeover in machining spindles. ER-40 collets for versatile clamping NT-50 taper (SK-style) compatible holder Set of 7 collets for common diameters Robust construction, approx. 7 kg overall Consistent clamping that improves process reliability A collet-based clamping system delivers high concentricity and repeatability, which directly reduces run-out and improves surface finish. The ER-40 standard used here ensures a widely supported clamping range and predictable axial alignment, benefitting both tapping and milling operations. With fewer variables in the tool-holding chain, cycle times stabilise and tool life becomes more consistent, leading to measurable savings in consumables and less rework. Straightforward compatibility and safe handling The holder matches an NT-50 taper, a steep-taper interface designed for robust spindle seating and minimal axial play. This taper form provides secure engagement for heavy cutting conditions while remaining compatible with machines that accept NT-50 tooling. The set’s overall weight of 7 kg signals a solid, workshop-ready construction that is easy to handle during setup and storage. Where tool retention and spindle interface are critical, the combination of ER-40 collets and NT-50 taper reduces the risk of loosening under load. Practical set configuration for workshop efficiency Supplied as a set of 7, the assortment covers a selection of frequently used clamping sizes, simplifying inventory and minimising downtime from tool changes. The compact configuration supports quick swaps and tidy storage on a tool trolley or in a cabinet. Manufactured by Vertex, the set reflects an industrial focus on durability and repeatable performance, making it suitable for small-series production, maintenance departments and general workshop environments where dependable clamping is essential. Contact Metav Werkzeuge to arrange supply of the Vertex V-219 NT-50 collet set and receive tailored application advice from our consultants Technical data Article number: V-219 GTIN: 4061905095481 Manufacturer: Vertex Facts Weight: 7 kg Pieces per set: 7 Taper: NT-50 Collet type: ER-40 Special features SK-style holder compatibility Collet set configuration Brand: Vertex Set design for workshop use FAQ What taper does the collet set use? The collet set uses an NT-50 taper in an SK-style holder, providing a steep-taper interface for secure spindle seating. Which collet standard is included in the set? The V-219 is supplied with ER-40 collets, a widely used standard that offers reliable concentricity and a versatile clamping range. How many pieces are supplied in this set? The Vertex V-219 is delivered as a set of 7 pieces to cover common clamping sizes and simplify workshop logistics. Is the V-219 suitable for heavy-duty milling? The NT-50 taper combined with ER-40 collets offers robust engagement and is appropriate where a secure tool-holding interface is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-50 ER-50 Collet Chuck Set With 12 ER50 Collets, SK Taper - Vertex
Take advantage of precise ER-50 clamping, NT-50 taper compatibility and a robust complete set to streamline tool changes and maintain consistent machining accuracy. Order the collet set directly via Metav Werkzeuge or ask our consultants if needed. V-220 Collet Set (ER-50) with NT-50 taper — Vertex V-220 Collet Set for secure, repeatable toolholding in industrial machining on spindles with an NT-50 SK taper ER-50 collet system for high-precision clamping Compatible with NT-50 SK taper spindles Complete set for reliable tool retention Durable construction for heavy-duty use Minimise runout and maintain cutting consistency The ER-style assembly delivers a uniform clamping force across the tool shank, reducing radial play and keeping runout to a minimum. This benefit translates directly into longer tool life and improved surface finish on critical components. The ER-50 configuration is a standard in heavy- duty toolholding, providing a balance between large clamping range and rigidity. For shops that prioritise repeatable results, the combination of an ER collet system and an NT-50 taper provides a stable interface between spindle and cutting tool, helping to reduce scrap rates and rework. Designed for compatibility and efficient changeover A collet system mounted to an NT-50 taper offers wide compatibility with machines that use a SK-style taper interface. The connection is engineered for quick seating and secure retention, enabling faster tool changes and reduced cycle downtime. Using a well- matched taper and collet series improves concentricity during high-speed rotation and heavy cuts, which is particularly advantageous in production environments where throughput and accuracy are both essential. The set format simplifies inventory management by grouping the required components in a single package. Practical benefits for workshops and production lines Beyond pure technical performance, the set format supports operational reliability: fewer individual orders, predictable tooling availability and simplified changeout procedures at the machine. Solid mechanical design makes the assembly resilient under repeated use, so maintenance intervals become more predictable. Paired with sound handling and cleanliness practices, such toolholding delivers consistent results shift after shift, giving operators confidence in both throughput and finish quality while supporting quality assurance processes. Contact Metav Werkzeuge for procurement of Vertex toolholding solutions or to discuss which taper and collet configuration best suits the machine tool and application at hand Technical data SKU: V-220 GTIN: 4061905095498 Manufacturer: Vertex Facts Weight: 11 kg Taper: NT-50 Collet type: ER-50 Special features Set including collet chuck with SK taper mount Designed for industrial machining applications Complete toolholding package for efficient changeover FAQ What taper does the set use and which machines is it compatible with? The set uses an NT-50 (SK) taper; it is compatible with machines designed for NT-50 spindle interfaces and provides secure seating for ER-50 collet assemblies. Which collet series is contained in the set and what is its clamping style? The set is built around the ER-50 collet series, which offers uniform radial clamping and a wide clamping range suitable for robust toolholding. Is this product suitable for production environments with frequent tool changes? Yes, the V-220 collet set by Vertex is designed for efficient changeover and repeatable clamping performance, making it well suited to production and workshop use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-50 ER32 Collet Chuck Set With Collets, 6 pcs - Vertex
Taking advantage of precise ER-32 clamping, a robust NT-50 taper and a practical six-piece configuration ensures stable toolholding and streamlined changeover. Order directly via Metav Werkzeuge or consult our specialists for application advice. V-216 Collet set — ER-32 collets with NT-50 taper by Vertex A collet set designed for secure toolholding in machining centres and milling spindles, combining ER-32 clamping with an NT-50 taper for heavy-duty compatibility. Precision ER-32 collets for concentric clamping NT-50 taper for heavy-duty toolholding Complete six-piece set for quick tool changes Consistent clamping for repeatable results The ER-32 collets provide consistent clamping that minimises runout and supports accurate machining passes. As a six-piece set, this toolholding solution reduces setup time when multiple diameters are required, improving throughput on repetitive operations. The result is fewer adjustments between jobs and a measurable improvement in part consistency, which is particularly valuable in serial production environments. Heavy-duty taper for demanding machining The NT-50 taper ensures robust mechanical engagement with the spindle, delivering improved stability during radial and axial loads. This characteristic is beneficial when finishing tougher materials or when carrying out deeper cuts, because the secure taper contact reduces the chance of micro-movement under load. The combination of NT-50 taper and ER-32 clamping supports higher machining reliability across a wide range of workshop applications. Practical workshop advantages and uncomplicated handling Prepared as a ready-to-use set, the V-216 promotes efficient workflows: fewer changeover steps, straightforward storage and predictable tool distribution across shifts. Maintenance requirements remain low due to the simple mechanical design; regular cleaning and inspection for wear are sufficient to maintain performance. The result is a pragmatic balance of robustness and ease of use that fits both production shops and precision toolrooms. Contact Metav Werkzeuge for tailored advice on integrating the Vertex V-216 collet set into existing spindles and to arrange purchase from our Emmerich warehouse Technical Data Article number: V-216 GTIN: 4061905095047 Weight: 5.5 kg Brand: Vertex Facts Collet type: ER-32 Taper: NT-50 Set contents: 6 pieces Special features Ready-to-use collet set Suitable for heavy-duty toolholding Compact workshop storage FAQ What does the V-216 set contain? The V-216 from Vertex contains a six-piece ER-32 collet set intended for use with NT-50 taper spindles and is supplied as a ready-to-use toolholding configuration. Is the set compatible with NT-50 spindles? Yes, the set is designed for NT-50 taper interfaces and provides the mechanical engagement required for stable machining under typical workshop loads. How does the ER-32 collet design affect concentricity? ER-32 collets in this set are engineered to maintain concentricity and consistent clamping force, which helps reduce runout and supports precision operations. What routine maintenance is recommended? Regular cleaning of the collets and taper contact faces, coupled with visual inspection for wear, will help the Vertex collet set retain performance over time. Can the V-216 set speed up shop workflows? Configured as a six-piece set, the V-216 reduces changeover time and simplifies tool organisation, contributing to smoother, more predictable workshop processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
NT-50 ER32 Collet Chuck Set With SK Shank, 11-Piece - Vertex
Take advantage of a robust ER-32 clamping system, an NT-50 taper for secure spindle mounting and an 11-piece composition that streamlines tooling inventory; order the set directly via Metav Werkzeuge or contact the consultants for specification advice. V-215 Collet Set (ER-32) with NT-50 taper by Vertex The V-215 Collet Set is a precision collet chuck set with an NT-50 taper, designed for secure workholding in milling and machining centres ER-32 collet system for versatile clamping NT-50 taper for heavy-duty spindle interfaces Complete 11-piece set for common diameters Robust construction; weight approx. 5.4 kg Consistent, repeatable clamping for machining tasks The ER-32 collet system provides a widely adopted standard for flexible, axial clamping of cylindrical tools and workpieces. Its design uses evenly distributed clamping force through a slotted sleeve, which makes secure gripping and quick changes possible without specialised fixtures. Combined with the NT-50 taper interface, the assembly ensures stable spindle engagement; this reduces setup variability and supports repeatable positioning in standard milling and turning operations. The combination of these features delivers clear operational advantages in terms of process reliability and reduced rework. Practical benefits of a compact, ready-to-fit set Delivered as an 11-piece set, the package covers the most frequently required clamping diameters, simplifying inventory and reducing changeover delays. The set’s substantial mass (approx. 5.4 kg) reflects a complete, workshop-ready configuration, allowing for stable handling and storage. The collet chuck included in the kit is purpose-built for direct mounting to compatible machine spindles, offering straightforward installation and removal during routine machine preparation. This organisation of components supports efficient shop-floor workflows and lowers the administrative burden of sourcing individual parts. Selection and care explained for workshop managers Choosing a collet chuck set involves matching taper standard and clamping system to the machine tool. The NT-50 taper determines spindle compatibility, while the ER-32 system sets the clamping range and accessory compatibility. Routine inspection of the clamping surfaces and light cleaning after use will help maintain consistent gripping performance and prolong the service life of the components. For operations seeking predictable machine uptime and reduced tooling complexity, this configuration offers a balanced compromise between flexibility and robustness, backed by Vertex's established manufacturing background. Contact Metav Werkzeuge today for technical clarification, compatibility checks and to secure the V-215 Collet Set through Metav’s quality-filtered stock in Emmerich – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-215 GTIN: 4061905095030 Manufacturer: Vertex Facts Weight: 5.4 kg Pieces per set: 11 ECLASS: 21022190 ETIM: EC001959 Special features ER-32 collet system NT-50 taper interface Complete collet chuck set Set composition for common diameters FAQ What does ER-32 mean in practice? ER-32 denotes the collet standard used in the V-215 Collet Set; it identifies the sleeve diameter and clamping range type and explains the system’s suitability for typical toolholding tasks. Is this set compatible with NT-50 spindles? Yes, the V-215 Collet Set is specified with an NT-50 taper interface, which is intended for machines fitted with the corresponding spindle taper. What is included in the set? The package is an eleven-piece set, covering the standard range of ER-32 collets commonly required in workshop routines. How heavy is the set and how does that affect handling? The complete set weighs approximately 5.4 kg, indicating a solid, workshop-ready kit that is easy to store and transport between preparation and machine stations. Who manufactures the set and how is quality ensured? The set is manufactured by Vertex; production follows established machining-tool standards and is offered through Metav Werkzeuge’s quality-filtered European distribution. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Precise, repeatable clamping for high-speed machining
Collets provide radial, 360-degree clamping that secures cylindrical tools and rod-shaped workpieces with outstanding concentricity and holding force. Designed from high-grade spring steel, these split clamping elements combine excellent runout accuracy with the grip required for vibration-reduced high-speed cutting (HSC) on modern CNC mills and turning centres.
How collets work and where they add value
The clamping principle relies on the radial elasticity of the split collet: when the collet is pushed into a tapered seat—either by tightening a nut in a collet chuck or by a pull stud and drawbar action—the slots constrict uniformly and the bore closes concentrically around the tool or workpiece. This uniform, full-circumference contact prevents pressure marks that occur with side clamping and ensures superior balance for demanding machining tasks. Typical applications include toolholding for end mills and twist drills, and direct spindle mounting for series turning using workholding collets such as 5C.
Practical benefits that improve shop performance
- Improved concentricity and runout for higher surface quality and longer tool life
- Uniform 360-degree force transmission, preventing shaft damage and reducing vibration
- Fast changeover and wide gripping ranges, reducing setup time and improving throughput
- Compatible with standard systems such as ER standard collets and 5C workholding solutions
- Suitable for high-speed cutting and applications requiring high dynamic balance
Metav: workshop precision made accessible
Metav combines decades of measurement and tooling expertise with a comprehensive range that simplifies procurement. Based in Emmerich, Metav operates as a quality filter for the European market and supports more than 48,000 customers. With over 250,000 products available, Metav supplies collets, collet chucks and complementary tooling from a single source—reducing supplier complexity and ensuring reliable delivery straight to the shop floor.
Technical data at a glance
- material: high-grade spring steel
- clamping principle: radial elasticity, split collet design
- force distribution: 360-degree force transmission
- compatibility: ER standard collets; steep taper and Morse taper chuck interfaces
- workholding types: toolholding collets, 5C workpiece collets, pull-stud/drawbar systems
- typical set content: collet range, collet chuck with taper, tightening wrench, protective storage case
- application: high-speed cutting (HSC), CNC milling, CNC turning, series bar turning
- advantages: reduced vibration, high dynamic balance, material-friendly clamping
FAQ
What are the main differences between ER collets and 5C collets?
ER collets are typically used for toolholding in collet chucks and offer a broad gripping range for taper-mounted chucks, while 5C collets are common as workpiece-holding collets for direct spindle mounting in lathes and fixture systems.
Can collets handle high-speed machining?
Yes. Collets made from high-grade spring steel, offering uniform clamping and excellent dynamic balance, are well suited to high-speed cutting (HSC) applications on modern CNC centres.
How does the 360-degree clamping benefit surface finish and tool life?
The full-circumference contact distributes clamping forces evenly, preventing localised deformation and vibration; this improves surface finish and extends tool life thanks to reduced runout and better balance.
Why choose Metav for collets and tooling?
Metav combines hands-on industry expertise with a broad product range and a strict quality filter in Emmerich, making it a dependable partner for procuring collets, collet chucks and associated tooling for professional workshops.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com