Die Kombination aus sicherer Klemmung, kompatibler Plattenaufnahme (DCMT 0702) und kompakter Bauform sorgt für zuverlässige Dreharbeiten im Alltag. Nutzen Sie die präzise Führungsgeometrie und das robuste Spannkonzept für konstante Ergebnisse; bestellen Sie den Klemmhalter SDJC for DCMT Indexable Inserts über Metav Werkzeuge oder fragen Sie unsere technische Beratung an.

Klemmhalter — SDJC for DCMT Indexable Inserts (flat execution) by Teknik Makina

The Klemmhalter SDJC for DCMT Indexable Inserts is a left‑hand, flat clamping holder engineered for secure turning with DCMT 0702 inserts, suitable for standard workshop toolposts.

• Compact flat holder for confined tool positions
• Secure clamping for DCMT 0702 inserts
• Left‑hand orientation for reverse turning
• Compatible with K07‑F shank systems
• Torx Schraube M2,5x5,5 with Torx Schlüssel T8

Secure Clamping for Consistent Chip Control

The Klemmhalter combines a low‑profile design with a positive clamping interface to hold DCMT 0702 Inserts firmly during interrupted cuts. The clamping mechanism, fastened via a Torx Schraube M2,5x5,5 and tightened with the Torx Schlüssel T8, reduces insert micro‑movement and supports repeatable cutting conditions. This stability benefits batch production by lowering rework rates and maintaining surface finish consistency.

Compact Geometry That Saves Space and Maintains Rigidity

With a Head Width and Holder Width of 12 mm and a Total Length of 125 mm, this flat execution balances accessibility and stiffness. The compact dimensions allow placement close to workpiece shoulders or in multi‑tool turrets while preserving rigidity through short overhangs. The modest Cutting Height of 15 mm ensures the Insert sits in a stable plane, which improves tool life under medium finishing to semi‑roughing feeds.

Built for DCMT 0702 Inserts and Left‑Hand Turning

Designed specifically for DCMT 0702 Indexable Inserts, the SDJC interface aligns insert geometry with the holder’s 93° cutting angle to provide predictable chip flow and controlled cutting forces. The left‑hand (reverse) Cutting Direction is integrated into the geometry, making the holder appropriate for operations that require inverted tool orientation without further modification.

Workshop Integration, Fast Setup and Maintenance

Integration with common shank systems is achieved via the designation K07‑F, simplifying toolholder selection for existing tool chains. The flat configuration eases access for insert changes and maintenance; only a single Torx Schraube secures the insert, reducing downtime during tool swaps. Clear markings and the ISO designation SDJCL 1212 support orderly toolroom management and traceability.

Strong recommendation: Choose the Teknik Makina SDJCL 1212 format of the Klemmhalter SDJC for DCMT Indexable Inserts for robust left‑hand turning; order through Metav Werkzeuge for assured European quality and rapid supply — eMail info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271.

Product Features

• Article number: D154TM
• Manufacturer: Teknik Makina
• Designation: Klemmhalter SDJC for DCMT Indexable Inserts (flat execution)

Facts

• Holder width: 12 mm
• Holder height: 12 mm
• Cutting head width: 12 mm
• Cutting height: 15 mm
• Total length: 125 mm
• Cutting angle: 93°
• Direction: Left‑hand
• Weight: 0.14 kg

Features

• Compatible Inserts: DCMT 0702
• ISO designation: SDJCL 1212
• Shank reference: K07‑F
• Torx Schraube: M2,5x5,5 — secures the Insert reliably
• Torx Schlüssel: T8 — required bit size for assembly

FAQ

What inserts fit this holder?
The Klemmhalter SDJC for DCMT Indexable Inserts from Teknik Makina is configured for DCMT 0702 Inserts; the seat geometry and 93° Cutting Angle are matched to that format, ensuring correct seating and chip evacuation.

Is this holder suitable for left‑hand turning operations?
Yes. The SDJC holder is a left‑hand design (Cutting Direction: Left), intended for reverse‑orientation turning tasks and compatible with standard lathe setups when mounted accordingly.

Which screw and key are needed to secure the insert?
The insert is clamped with a Torx Schraube M2,5x5,5, tightened using a Torx Schlüssel T8, providing straightforward serviceability and a defined torque interface.

Can the holder be used with existing shank systems?
The holder references the shank designation K07‑F, allowing integration into compatible tool posts and reducing the need for additional adapters.

What is the ISO designation for ordering and toolroom labelling?
Order and stock the item under ISO designation SDJCL 1212 or SKU D154TM from Teknik Makina for unambiguous identification.

Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com