150mm Klemmhalter 107.5° SVHCR 2525 M16 for VCMT 1604 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina

Reliable choice for turning operations: the SVHCR 2525 clamping holder combines secure insert seating, a 107.5° approach angle and a rigid 25 mm shank to deliver stable right-hand cuts; order directly via Metav Werkzeuge or consult our specialists for compatibility advice.

SVHCR 2525 clamping holder — Right-hand turning holder for VCMT 1604 indexable inserts (Teknik Makina)

SVHCR 2525 clamping holder is a right-hand turning tool designed to accept VCMT 1604 indexable inserts, providing a 107.5° geometry for controlled cutting in general turning applications.

• Right-hand turning holder
• Fits VCMT 1604 indexable inserts
• 25 mm shank height for rigid mounting
• 107.5° approach angle for stable cuts

Consistent stability for reliable turning performance

The SVHCR 2525 clamping holder delivers rigid support for indexable inserts, translating into predictable chip formation and repeatable dimensional results. With a 25 mm shank height and a total length of 150 mm, the holder minimises overhang and deflection, allowing higher feed rates and improved surface finish. The right-hand orientation and the 107.5° approach angle are optimised to reduce radial cutting forces, which helps maintain tool life and machining consistency across series production.

Simple compatibility and secure clamping explained

Designed for VCMT 1604 insert geometry, the holder uses an M16 clamping interface for the tool screw, ensuring firm seating of the insert and straightforward replacement. The clamping concept avoids complex setup procedures: the insert locates in the pocket, the screw is tightened to secure the seat, and the component is ready for operation. This straightforward method makes the holder suitable for both experienced shops and those expanding their turning capability, reducing machine downtime during insert changes.

Geometry that reduces vibration and extends component life

The head width of 32 mm and a cutting height of 30 mm create a compact, robust front end that resists chatter during interrupted cuts or heavy cross-sections. At a mass of 0.707 kg, the toolholder provides sufficient inertia to dampen minor tool oscillations without compromising nimble handling on the turret. The combination of compact head dimensions and a conservative 107.5° cutting angle results in a balance between cutting aggression and stability, which improves repeatability and prolongs both insert and holder service life.

Where and how this holder works best

This right-hand clamping holder is intended for general turning tasks on lathes and turning centres where VCMT 1604 inserts are preferred for medium to finishing passes. Its construction supports typical steel and alloy turning operations where a controlled approach angle yields consistent part tolerances. When mounting, ensure the turret seat accepts a 25 mm shank, verify the M16 clamping screw engagement and confirm the insert type — this prepares the setup for efficient production cycles with reduced rework. The SVHCR 2525 offers a practical solution for workshops seeking straightforward toolholding without sacrificing machining stability.

Choose the SVHCR 2525 clamping holder from Teknik Cutting Tools and contact Metav Werkzeuge for expert compatibility advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• SKU: D256TM
• Model designation ISO: SVHCR 2525
• Compatible inserts: VCMT 1604
• Manufacturer: Teknik Makina

Facts

• Shank height: 25 mm
• Head width: 32 mm
• Holder width: 25 mm
• Cutting height: 30 mm
• Total length: 150 mm
• Weight: 0.707 kg
• Cutting angle: 107.5°
• Cutting direction: right
• Clamping screw/thread designation: M16

Special features

• Right-hand turning holder design
• Accepts indexable VCMT 1604 inserts
• Robust front geometry for reduced vibration
• M16 clamping interface for secure insert seating

FAQ

What inserts are compatible with this holder?
The SVHCR 2525 clamping holder accepts VCMT 1604 indexable inserts, which seat in the pocket and are secured via the M16 clamping interface.

Is this holder suitable for left-hand turning?
No, this toolholder is manufactured for right-hand cutting; its geometry and cutting angle are optimised for right-hand turning operations.

What are the critical dimensions to check before purchase?
Confirm turret shank accommodation for a 25 mm shank height and sufficient clearance for the 150 mm overall length; these dimensions are key for correct fitment of the SVHCR 2525.

How does the 107.5° approach angle affect machining?
The 107.5° approach angle moderates radial cutting forces, improving stability and surface finish during turning, which helps to reduce tool wear and scrap rates.

Can the holder be used for heavy roughing passes?
The holder’s compact head and 32 mm width provide good rigidity for many finishing and medium-duty operations; for heavy roughing, assess machine power, clamping and insert grade before proceeding with aggressive parameters.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com