16mm Klemmhalter 93° SDJCL 1616 H07 For DCMT 0702 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina

Benefit from a compact, left‑hand clamping solution that combines precise fit for DCMT 0702 indexable inserts and a rigid 16 x 16 mm shank to keep turning operations stable; order the SDJCL 1616 clamping holder (D361TM) directly via Metav Werkzeuge or request guidance from our technical consultants.

SDJCL 1616 clamping holder — left‑hand, for DCMT 0702 indexable inserts (Teknik Makina)

SDJCL 1616 is a left‑hand clamping holder engineered for secure turning with DCMT 0702 indexable inserts in compact lathe and CNC setups

• Left-hand holder for DCMT 0702 inserts
• Shank 16 x 16 mm for secure clamping
• Overall length 100 mm with 93° cutting angle

Stable left‑hand turning with proven insert compatibility

The holder is designed for left‑hand cutting direction and accepts standard DCMT 0702 indexable inserts, enabling consistent edge engagement during left‑hand turning operations. The geometry with a 93° cutting angle supports neutral cutting forces for a range of finishing and semi‑finishing tasks; this reduces lateral motion and contributes to improved surface consistency. The clamping arrangement is optimised for repeatable insert seating so set‑up time is reduced and component tolerances are easier to maintain.

Compact shank and rigid head for vibration control

A square 16 x 16 mm shank and a 20 mm cutting‑head width provide a compact footprint while offering torsional resistance during interrupted cuts. The holder’s cutting height 18 mm aligns insert top‑land position for predictable toolpaths, and the modest weight 0.2 kg limits overhang inertia on small toolposts. Fast axial mounting is facilitated by a Torx screw specified as M2.5x5.5 with a T8 key, which secures the insert clamp and helps prevent screw cam‑out during torqueing.

Practical benefits for workshop efficiency and inventory

With an overall length of 100 mm, the toolholder fits many small to mid‑sized turning fixtures without requiring bespoke holders. The standardisation on DCMT inserts reduces the number of different spare inserts required in stock and simplifies changeovers. The holder’s concise design supports close‑quarter machining and is suitable where space is limited but precision remains essential. The component is supplied under Teknik Makina quality standards and carries the SKU D361TM for easy reordering.

For reliable left‑hand turning choose the Teknik Makina SDJCL 1616 — contact Metav Werkzeuge in Emmerich for tailored technical advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930

Technical Data

• Article number: D361TM
• Manufacturer: Teknik Makina
• ISO designation: SDJCL 1616
• For inserts: DCMT 0702
• Torx screw: M2.5x5.5

Numbers / Core technical data

• Shank width: 16 mm
• Shank height: 16 mm
• Head width: 20 mm
• Cutting height: 18 mm
• Overall length: 100 mm
• Weight: 0.2 kg
• Cutting angle: 93°

Special features / Versions

• Left‑hand cutting direction
• Clamping screw key: T8
• Toolholder designation: H07
• Compatible with indexable turning inserts

FAQ

Is this holder compatible with standard DCMT inserts? Yes. The SDJCL 1616 clamping holder accepts DCMT 0702 indexable inserts and is prepared for standard seat geometry.

What does left‑hand orientation mean for setup? Left‑hand orientation means the cutting edge faces and cuts towards the left when viewed from the spindle front; the holder is intended for left‑hand turning operations.

Which screw and key secure the insert? The insert clamp is held with a M2.5x5.5 Torx screw; a T8 key is specified for correct torque and repeatable clamping.

Can this holder be used on compact lathes? Yes. The 16 x 16 mm shank and 100 mm overall length make the holder suitable for compact lathe toolposts and smaller CNC turret stations.

What are the dimensional references to check before ordering? Check shank size (16 x 16 mm), cutting height (18 mm) and head width (20 mm) to ensure alignment with the machine’s tool offset and turret capacity.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak. No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com