110g Moisture Analyzer With 0.001g Readability, Halogen Quartz Heater, 14mm LCD - KERN

Take advantage of a reliable filtration solution that combines glass fibre construction, an organic binder for structural integrity, and a convenient pack of 100 to streamline sample processing for scales and laboratory workflows. Order directly via Metav Werkzeuge or consult our specialists for procurement and technical advice. Glass fibre round filter RH-A02 — Pack of 100, organic binder | KERN The Glass fibre round filter RH-A02 is a filtration accessory designed for preparation and separation of liquid, pasty, splashing and crust-forming samples in weighing and laboratory contexts. Pack of 100 ready-to-use filters High-retention glass fibre material Organic binder for sample integrity Suitable for liquid, pasty and crusting samples Consistent filtration where sample integrity matters The RH-A02 is manufactured from glass fibre material bonded with an organic binder, giving a stable disc structure that resists tearing and particle shedding during handling. For laboratories and weighing stations that process diverse sample types — from viscous pastes to splashing liquids and crusted residues — this construction reduces the risk of filter disintegration and ensures consistent filtration across multiple runs. The result is improved repeatability of sample pre-treatment and fewer interruptions in daily workflows. Designed to support efficient workflows and inventory control Supplied as a pack of 100, these round filters support uninterrupted operation in busy environments by reducing the frequency of reorders. The standardised shape and packaging make storage and dispenser organisation straightforward, helping maintain an orderly bench and faster sample throughput. Where throughput and time are key performance metrics, this accessory contributes to a smoother handling process and predictable supply for scale and laboratory accessory inventories. Clear material suitability and application scope Produced by KERN in Germany, the RH-A02 is intended as an accessory for weighing equipment and general sample preparation tasks. The combination of glass fibre and an organic binder makes the discs suitable for a broad range of media without compromising structural stability. For users seeking to avoid cross-contamination and to maintain sample integrity during filtration, these filters offer a pragmatic balance between mechanical strength and filtration performance, while being compatible with standard filter holders and sample cups used in scale-based workflows. Contact Metav Werkzeuge today to secure KERN RH-A02 units for your workshop or laboratory and to receive tailored advice on integrating them into existing weighing and sample-preparation processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: RH SKU: RH-A02 GTIN: 4045761044265 Manufacturer: KERN Country of origin: DE HS code: 90160090 Weight: 0.05 kg Pack quantity: 100 pieces Core specifications Material: glass fibre Binder type: organic binder Product category: scales accessory ECLASS: 32110202 Materials & features Suitable for liquids, pastes, splashing and crust-forming samples High retention, low shedding construction Packaged for professional laboratory and weighing use Manufactured in Germany FAQ Are these filters suitable for viscous or paste-like samples? Yes. The RH-A02 glass fibre round filters with an organic binder are intended for liquid and pasty samples as well as splashing and crusting materials, providing structural stability during filtration. How many filters are included per pack? The RH-A02 is supplied as a pack of 100 pieces, offering a convenient quantity for regular laboratory or weighing-station use. Can these filters be used with standard scale filter holders? The RH-A02 is designed as a scales accessory and is compatible with common filter holders and sample cups used in weighing and preparation workflows. Does the organic binder affect analytical results? The organic binder in the RH-A02 is applied to enhance disc integrity; it is formulated to minimise interference in typical pre-analytical procedures. For specific analytical methods, compatibility checks are recommended. Who manufactures the RH-A02? The RH-A02 is manufactured by KERN in Germany and is distributed for professional use in laboratory and weighing contexts. KERN • Germany • info@metav-werkzeuge.com • +49 2822 7131930

Combine industry-grade accuracy with a robust stainless-steel finish and compact button design to ensure reliable calibration results and simple handling. Order directly via Metav Werkzeuge or contact our consultants for accessory recommendations. KERN 337-07 calibration weight – 100 g, OIML F2, stainless steel A KERN 337-07 single calibration weight in button form, designed for verification and routine calibration of precision balances in laboratories and workshops. OIML class F2 precision Nominal value 100 g Fine-turned stainless steel Button form 22×39 mm Precision where measurement counts The OIML F2 classification and a stated tolerance of 1.6 mg make this calibration weight suitable for high-accuracy verification tasks and internal quality control. As a 100 g reference mass, it provides a compact, traceable standard that supports reproducible results on analytical and precision balances. Choosing a weight with defined OIML conformity reduces uncertainty in routine checks and helps meet audit and certification requirements, allowing calibration cycles to be planned with confidence. Durable construction for repeatable results Manufactured from fine-turned stainless steel, the reference mass offers excellent surface integrity and corrosion resistance, which preserves the metrological properties over time. The button form simplifies handling and placement on small balance pans, while the compact 22×39 mm geometry minimises thermal and air-flow influences during weighing. This combination of material and shape reduces wear and maintains mass stability, decreasing the frequency of replacements and interventions. Practical integration into calibration routines Designed as a reference mass for balance verification, this weight supports efficient calibration workflows: small footprint for bench use, clear classification for documentation, and a robust finish for everyday handling. A protective case is recommended given the tight tolerance of the class; Metav offers suitable etuis and accessory options to protect the reference mass during storage and transport. Using a well-documented single weight like this reduces downtime during routine checks and simplifies traceability records. Trusted supply and quality assurance Produced by a recognised metrology manufacturer in Germany and supplied with full identification, the calibration mass is designed for professional environments where repeatability and traceability are essential. Relying on certified reference masses contributes directly to process reliability and customer confidence in measured results. Metav’s procurement and quality-filtering at Emmerich ensures consistent product availability and compliant delivery for industrial and laboratory use. Contact Metav Werkzeuge for tailored advice on the KERN 337-07 calibration weight, accessory recommendations and to request the suitable protective case — email info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Article number: 337 SKU: 337-07 Manufacturer: KERN GTIN: 4045761006409 Country of origin: DE OIML class: F2 Core specifications Nominal value: 100 g Mass: 0.1 kg Tolerance (OIML F2): 1.6 mg Dimensions (cylinder): 22×39 mm Tariff code: 84239090 Special features Fine-turned stainless steel Button form for safe placement Suitable for laboratory and balance calibration Recommendation: protective case (etui) FAQ What accuracy class does this weight meet? The weight conforms to OIML F2 and is specified with a tolerance of 1.6 mg, making it suitable for precision verification and internal calibration tasks. For which applications is this reference mass intended? This single calibration weight is intended for verification of precision and analytical balances in laboratories, quality control departments and workshop metrology. How should the weight be stored and handled? Handle the mass with clean tweezers or gloves and store it in a protective case to avoid surface contamination; a protective etui is recommended for the KERN 337-07 due to its narrow tolerance. What benefits does the stainless-steel construction provide? Fine-turned stainless steel offers corrosion resistance and dimensional stability, which preserves the mass value and extends service life under normal laboratory conditions. Is a protective case necessary for transport? Given the tight tolerance of the class, a protective case is strongly recommended to prevent damage or contamination during transport and storage. KERN · Country of origin: DE · GTIN: 4045761006409

Aluminium sample pans with a Ø 90 mm diameter supplied as a pack of 80 combine lightweight durability and efficient stock handling for routine weighing tasks; order directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN MLB-A01A – Aluminium sample pans, Ø 90 mm A KERN MLB-A01A aluminium sample pan designed as a scales accessory for routine sample weighing and handling in laboratories and workshops Aluminium construction, corrosion-resistant Diameter Ø 90 mm for standard balances Supplied as pack of 80 pieces Built for dependable weighing results The aluminium construction provides a stable, low-mass tray that minimises thermal influence and helps maintain consistent readings on laboratory and industrial balances. The Ø 90 mm footprint matches common pan dimensions, ensuring reliable seating on most bench and precision balances without the need for adaptors. Aluminium is non-magnetic and has a naturally passive surface, which reduces interaction with many sample types; this supports precise mass determination and simplifies error sources during routine measurements. Stock efficiency and handling for busy workflows Supplied as a pack of 80, the pans reduce the frequency of reordering and simplify inventory management for production lines, quality departments and teaching labs. The total net weight is approximately 0.3 kg, which reflects the lightweight nature of the set and eases handling during restocking and storage. Bulk supply also supports hygienic practices: single-use or dedicated pans per batch prevent cross-contamination and save time otherwise spent on repeated cleaning cycles, increasing throughput in repetitive weighing operations. Compatibility, maintenance and sustainability benefits Designed as an accessory for balances, the pans are suitable for general sample collection and short-term storage before and after weighing. Aluminium pans are easy to clean with standard laboratory detergents and are recyclable at end of life, offering a pragmatic balance between operational convenience and environmental considerations. Originating from China under the KERN range, these pans provide a consistent specification that integrates well with established weighing procedures and lab workflows. For reliable replenishment of KERN aluminium sample pans in packs of 80 and expert advice on compatibility with existing balances, contact Metav Werkzeuge in Emmerich to arrange supply and technical guidance. Technical data Article number: MLB-A01A Manufacturer: KERN GTIN: 4045761179646 Country of origin: CN Tariff code: 90160090 Core technical data Diameter: Ø 90 mm Net weight: 0.3 kg Pack quantity: 80 pieces ECLASS: 32040606 Materials & applications Material: Aluminium Category: Scales accessories Suitable for: sample weighing and handling FAQ Are these pans compatible with precision analytical balances? Yes. The KERN MLB-A01A aluminium pans are designed with a Ø 90 mm diameter to fit standard analytical and bench balances, providing stable seating and repeatable readings. Can the pans be cleaned and reused? Yes. The aluminium construction allows cleaning with common laboratory detergents; depending on the application, the pans can be reused or treated as single-use to avoid cross-contamination. What quantity is supplied per pack? The product is supplied as a pack of 80 pieces, which is useful for laboratories and workshops that require frequent replenishment. Is the material suitable for reactive samples? Aluminium has a passive surface but may react with strongly alkaline or acidic reagents; for reactive samples, consider appropriate lining or an alternative pan material. The KERN MLB-A01A is suitable for routine, non-corrosive sample handling. Where are these pans produced? These aluminium sample pans are manufactured in China and distributed under the KERN range. Metav Werkzeuge, Emmerich am Rhein – info@metav-werkzeuge.com – +49 2822 7131930

Take advantage of the precise temperature control and rapid response of this infrared quartz glass solution to reduce thermal drift and improve repeatability in weighing and laboratory set-ups; its broad operating range and OEM availability support flexible integration into production lines. Order the device directly via Metav Werkzeuge or contact our consultants for specification queries. DAB-A02 infrared quartz glass radiator — rapid response, 40–160 °C | KERN The DAB-A02 is an infrared quartz glass radiator designed as an accessory for scales and laboratory applications, delivering controlled radiant heat for temperature-sensitive measurement tasks. Rapid infrared heat-up Operating range 40–160 °C Designed for scale accessories Factory option for OEM integration Improved measurement stability through targeted infrared heating The heater provides focused infrared heating that reduces ambient influences on measurement devices, helping to maintain consistent conditions during weighing and testing. By operating across a 40–160 °C range, the unit supports a variety of applications where thermal drift can compromise results. The quartz glass emitter ensures fast response and a concentrated heat profile, which shortens warm-up periods and contributes to reliable repeatability in precision tasks. Simple integration and measurable process benefits Engineered as an accessory for weighing systems, the radiator is suited for integration where stable temperature is essential for accuracy. Its design allows attachment as an external heat source or inclusion as a factory option for original equipment manufacturers, enabling straightforward retrofitting or OEM installation. The predictable infrared output lowers the need for frequent recalibration, translating into measurable increases in throughput and fewer interrupted operations. Practical advantages for workshop and laboratory use Beyond thermal performance, the unit supports efficient workflow by stabilising sample or instrument temperature without complex enclosures. The quartz glass emitter is resistant to thermal shock and produces even irradiation, which helps to avoid localised hotspots that could affect sensitive components. For precision environments, this means fewer discarded measurements and improved confidence in results—delivering both operational efficiency and process quality. Operational note and suitability Rated for an operating span from 40–160 °C, the device is intended for professional environments and accessory use with scales and related measurement equipment. As a component designed by KERN, it is supplied for integration into existing setups or as a factory-supplied option. Observe relevant safety and installation instructions when fitting the radiator to avoid interference with scale calibration or measurement surfaces. For precise temperature control in weighing applications, discuss integration and availability of the KERN DAB-A02 with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to request technical clarification or compatibility advice. Technical data Article number: DAB-A02 Manufacturer: KERN Product name: Infrared quartz glass radiator Operating temperature: 40–160 °C Facts ECLASS: 36082410 Special features Category: Accessories for scales Factory option available SKU: DAB-A02 FAQ Is the radiator suitable for use with weighing systems? The DAB-A02 infrared quartz glass radiator is designed as an accessory for scales and is suitable where controlled radiant heating improves measurement stability. What operating temperatures does the unit support? The device operates across a 40–160 °C range, enabling use in a variety of temperature-controlled measurement tasks. Can the heater be supplied as an OEM option? Yes, the unit is available as a factory option for OEM integration, facilitating incorporation into customised equipment. How quickly does the quartz emitter respond? The quartz glass emitter provides fast response and focused infrared output, reducing warm-up time compared with larger radiant systems. Are there special installation considerations to avoid affecting calibration? Installation should ensure the heat source does not contact load-bearing surfaces or interfere with weighing mechanics; the radiator is intended for professional installation alongside calibration procedures. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of reliable RS-232 data transfer and a 1.5 m cable length to integrate measurement equipment smoothly into existing workflows. Order the cable directly via Metav Werkzeuge from the Emmerich warehouse or request tailored advice from our consultants. MLB-A05 Interface Cable — RS-232 connection, 1.5 m (KERN) The MLB-A05 Interface Cable is a dedicated RS-232 connection lead for weighing instruments and laboratory balances, engineered to provide steady data transmission between measurement devices and external systems. RS-232 serial interface 1.5 m cable length Compatible with KERN balances Robust connector design Ensure accurate data logging with stable RS-232 transfer The RS-232 interface offers a proven, industry-standard method for serial data exchange, making this cable well suited to industrial metrology and laboratory environments where measurement integrity matters. By providing reliable data transfer, the cable reduces the risk of communication errors during recording and logging tasks, which in turn supports traceability and process consistency. The design supports routine integration into existing measurement setups without requiring changes to software or instrument firmware. Easy integration and clear compatibility for weighing systems With a 1.5 m lead, connection flexibility between bench instruments and nearby data terminals is increased while keeping cable routing tidy in workshop or lab setups. The cable is specified for use with RS-232-equipped devices commonly found on balances and related instruments, ensuring broad compatibility across models. Installation is straightforward: the interface lead serves as a direct conduit for serial signals, simplifying set-up procedures and reducing the need for adapters or converters in typical measurement environments. Built for dependable workshop and laboratory use The cable’s construction balances a robust connector with low weight, enabling frequent handling and routine use at weighing stations without imposing undue strain on instrument ports. The modest mass supports neat cable management and minimises mechanical load on connectors during daily operation. Sourced under the KERN product line, the accessory is intended to complement precision equipment with components that preserve uptime and support consistent measurement workflows. For reliable serial connectivity choose the KERN MLB-A05 interface cable—contact Metav Werkzeuge in Emmerich for specialist guidance or to order directly from our stock. Technical data Article number: MLB-A05 Manufacturer: KERN SKU: MLB-A05 GTIN: 4045761245204 Core data Cable length: 1.5 m Weight: 0.08 kg ECLASS: 19050112 Tariff code: 84239010 Special features Interface: RS-232 Category: Accessories for scales Origin: China FAQ What interface does this cable use? The MLB-A05 interface cable uses the RS-232 serial interface for data transfer between balances and external devices. Is the cable compatible with KERN scales? Yes, the lead is specified for compatibility with KERN weighing instruments and other devices that provide an RS-232 port. How long is the cable and how heavy is it? The cable measures 1.5 m in length and has a weight of 0.08 kg, suitable for bench-top and near-equipment routing. Can this cable be used for data logging to a PC or printer? The MLB-A05 is designed for RS-232 connections and can be used to link RS-232-capable instruments to serial printers or data acquisition systems that accept serial input. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930