DCGT11T304-FN2 WN10 Wendeplatten - Walter Tools

Combining the robust WN10 uncoated cemented carbide with the FN2 chipbreaker and the Rhombus 55° geometry results in stable chip formation and productive turning performance; order the DCGT11T304-FN2 WN10 through Metav Werkzeuge or consult our advisers for specifications and suitable cutting data.

DCGT11T304-FN2 WN10 rhombic 55° turning insert by Walter Tools – FN2 chipbreaker, corner radius 0.4 mm

The DCGT11T304-FN2 WN10 is an indexable turning insert designed for versatile turning tasks where predictable chip control and a reliable cutting edge are required

• Uncoated cemented carbide WN10
• Rhombus 55° geometry for versatile turning
• FN2 chipbreaker for controlled chip flow
• Corner radius 0.4 mm and 7° relief

Predictable chip control for continuous production

The uncoated WN10 grade is a cemented carbide formulation optimised for stable chip formation and consistent tool life in general turning operations. The integrated FN2 chipbreaker is engineered to produce short, manageable chips under typical turning conditions, which reduces the risk of entanglement and machine downtime. For users without in-depth coating chemistry knowledge, an uncoated carbide simply means reliable edge strength without an additional coating layer; this can be preferable where adhesion of workpiece material or certain cutting conditions would diminish coated performance. Check the manufacturer’s product matrix for specific material suitability before defining feeds and speeds.

Geometry that balances strength and surface quality

The Rhombus 55° plate form enables a range of approach angles suitable for axial and light radial engagement, while the corner radius 0.4 mm provides a compromise between edge robustness and surface finish. The 7° relief (clearance) angle minimises rubbing on the flank face and helps to maintain surface integrity during longer tool paths. Together, these features allow a reduced number of tool changes and offer predictable results in mixed production environments. Where surface finish matters, selecting the appropriate depth of cut in combination with the small corner radius will deliver improved part quality.

Process reliability, selection and handling advice

Tolerance class G and the identification as part of the Walter Schneidstoffsorte - Serie offen indicate consistent manufacturing standards and a straightforward grade designation. Plate thickness T3 and the 11 mm nominal size suit common toolholders designed for this insert form; verify compatibility with holder specifications. The material designation is catalogue-dependent, so final material compatibility and cutting data should be confirmed from Walter Tools documentation or via Metav Werkzeuge if specific alloys or hardening levels are involved. Selecting the right insert grade and chipbreaker reduces cycle times and enhances process security, supporting higher productivity and repeatability on the shop floor.

For application-specific advice on Walter Tools inserts such as the DCGT11T304-FN2 WN10, contact Metav Werkzeuge for tailored recommendations and fast supply coordination.

Technical data

• Article number: DCGT11T304-FN2-WN10-WALTER
• SKU: DCGT11T304-FN2-WN10-WALTER
• Label: Drehwendeschneidplatte DCGT11T304-FN2 WN10 Walter Tools
• Manufacturer: Walter Tools
• Series: Walter Schneidstoffsorte - Serie offen
• Grade: WN10
• Material: catalogue-dependent

Core data

• Size: 11 mm
• Corner radius: 0.4 mm
• Relief angle: 7°
• Thickness: T3
• Tolerance class: G

Special features

• Rhombus 55° plate form
• Chipbreaker: FN2
• Uncoated cemented carbide (WN10)
• Designed for versatile turning operations

FAQ

Which materials is this insert suitable for?
The DCGT11T304-FN2 WN10 is an uncoated cemented carbide insert from Walter Tools; material suitability depends on the specific workpiece alloy and should be checked against Walter Tools’ product matrix before machining.

Is the DCGT11T304-FN2 WN10 coated?
No, the DCGT11T304-FN2 WN10 is delivered as an uncoated cemented carbide grade (WN10) to provide a robust cutting edge without an additional coating layer.

What are the geometric specifications that affect performance?
The insert features a Rhombus 55° form, a corner radius of 0.4 mm and a relief angle of 7°, which together influence edge strength, surface finish and clearance behaviour during turning with Walter Tools inserts.

Which chip behaviour can be expected with the FN2 chipbreaker?
The FN2 chipbreaker on this DCGT11T304-FN2 WN10 insert promotes short, controlled chips under typical turning parameters, supporting safer handling and reduced interruption from chip management.

How to verify toolholder compatibility for this insert?
Compatibility should be confirmed against the toolholder’s accepted insert designation for DCGT 11 type inserts; consult holder specifications and Walter Tools guidance for exact fitment and clamping requirements.

Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen

Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes and indicate compatibility or origin; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.