DCMW11T308 WAK10 WAK10 Wendeplatten - Walter Tools

Take advantage of a purpose-built insert that combines a sharp cutting edge, proven geometry and material compatibility for efficient machining of aluminium and other non-ferrous alloys; order directly via Metav Werkzeuge or consult the team for application-specific advice.

DCMW11T308 WAK10 turning insert by Walter Tools — rhombic 55° with 0.8 mm corner radius

A DCMW11T308 WAK10 turning insert designed for aluminium and non‑ferrous metals, offering a 55° rhombic geometry and a defined 0.8 mm corner radius for controlled surface finish.

• Sharp edge for high-quality aluminium machining
• Rhombic 55° shape for flexible tool positioning
• 0.8 mm corner radius for defined surface finish
• Uncoated carbide WAK10 tailored to non-ferrous alloys

Efficient machining of aluminium and non‑ferrous materials with a dedicated carbide grade

The insert is manufactured in the WAK10 uncoated carbide grade, optimised for aluminium and other non‑ferrous metals (ISO group N). This composition combines a sharp cutting edge with good wear behaviour during operations that require low adhesion and reduced built‑up edge. For production environments that prioritise cycle time and consistent component quality, the material selection translates into predictable tool life and fewer interruptions for re‑grinding. The result is improved process reliability when turning soft, adhesive materials.

Geometry that controls chips and surface quality

The Rhombic 55° geometry and a 0.8 mm corner radius deliver a balance between accessibility and surface integrity. The 55° shape allows versatile tool approach angles for external and light profiling work, while the corner radius helps produce a defined surface finish without excessive cutting forces. The insert’s relief angle 7° reduces friction at the flank, supporting stable chip flow and limiting heat build‑up. Together these geometric features enable precise, repeatable results on components where dimensional consistency matters.

Robust workshop performance and toolholder compatibility

Tolerance class M and the T3 plate thickness make this insert suitable for standard turning toolholders that accept DCMW‑style inserts, giving shops straightforward integration into existing tooling systems. The designation indicates controlled manufacturing tolerances that aid in repeatable positioning and reliable clamping. Where quick changeovers and consistent part quality are required, the predictable fit and stable seating reduce set‑up time and help maintain spindle utilisation.

Practical selection and application guidance for production use

When selecting the insert for a given task, consider the material grade and required surface finish: WAK10 is aimed at non‑ferrous work and delivers its best performance with sharp geometries and appropriate cutting fluids or minimal lubrication to avoid material build‑up. For finishes that demand low roughness combined with tight form tolerances, pairing the insert with the correct cutting parameters and a suitable toolholder yields marked improvements in throughput. For application advice or parameter recommendations, Metav Werkzeuge can provide support tailored to the production scenario.

Contact Metav Werkzeuge for personalised advice on integrating Walter Tools turning inserts into production and to confirm the optimal insert geometry for non‑ferrous machining.

Technical Data

• Article number: DCMW11T308-WAK10-WALTER
• SKU: DC...WAK10-WALTER
• ISO designation: DCMW11T308 WAK10
• Series: Walter N‑Sortensystem
• Execution: W

Facts

• Geometry: Rhombic 55°
• Corner radius: 0.8 mm
• Relief angle: 7°
• Plate size: 11
• Plate thickness: T3
• Tolerance class: M

Special features

• Grade: WAK10 (uncoated carbide)
• Application group: N (aluminium and non‑ferrous metals)
• Intended use: Turning / general external machining of non‑ferrous alloys
• Good chip control and sharp cutting edge for adhesive materials

FAQ

Which materials are best machined with this insert? The insert is designed for machining aluminium and other non‑ferrous metals; the WAK10 grade and sharp geometry are tailored to minimise material adhesion during cutting.

What advantage does the Rhombic 55° shape provide? The 55° rhombic geometry enables flexible approach angles for turning and light profiling, improving accessibility while maintaining a consistent cutting engagement for defined surface finishes.

How does the 0.8 mm corner radius affect part quality? A 0.8 mm corner radius helps achieve a controlled surface finish and reduces the risk of edge chipping, balancing cutting forces and improving the final appearance of turned faces.

Is this insert compatible with standard DCMW toolholders? The insert follows the DCMW form factor and T3 thickness, suitable for toolholders that accept this insert type; tolerance class M supports consistent seating and repeatable set‑ups.

How should cutting parameters be adapted for best results? For aluminium and soft non‑ferrous alloys, use sharp geometries, moderate cutting speeds, and appropriate lubrication or minimum quantity lubrication to limit built‑up edge and preserve the sharpness of the uncoated grade.

Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany

The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise of the manufacturer.