DNGG150608-NFT WS10 WS10 Wendeplatten - Walter Tools

Combining the WS10 coated‑carbide grade with the NFT chipbreaker and a rhombic 55° geometry yields stable chip formation and dependable edge life for medium to heavy turning operations; order the insert via Metav Werkzeuge or request application advice for specific material matrices.

DNGG150608-NFT WS10 — Walter Tools turning insert with NFT chipbreaker and 0° negative rake

DNGG150608-NFT WS10 is a rhombic 55° turning insert designed for general turning tasks where consistent chip control and predictable tool life are required.

Coated carbide grade WS10 for general machining Rhombic 55° insert geometry for flexible turning NFT chipbreaker for controlled chip formation Negative rake 0° for robust cutting edge

Predictable performance from a coated carbide grade

The WS10 grade is a coated carbide variant developed for broad applicability across common turning tasks. Its coating supports heat resistance and wear protection, which translates into longer tool life and fewer interruptions for insert changes. In practice, the coated surface reduces flank wear under steady cutting conditions, so operators benefit from consistent dimensional accuracy over longer runs. The combination of a wear‑resistant grade and an engineered coating means predictable productivity in mixed production environments.

Stable chip control through the NFT chipbreaker

The integrated NFT chipbreaker is engineered to produce short, controllable chips across a range of cutting parameters. Good chip control minimises rework and reduces the risk of tool or workpiece damage, improving operator safety and downstream handling. For machinists working with interrupted cuts or variable feed rates, the chipbreaker design reduces the need for manual chip clearing and helps maintain steady cycle times—an operational advantage that converts directly into higher throughput.

Geometry and mechanical robustness for demanding turning

The rhombic 55° form combined with a negative rake of 0° delivers a robust cutting edge suited to heavier cuts and interrupted work. The insert’s corner radius 0.8 promotes a balance between edge strength and surface finish: a larger radius increases edge stability, while the 0.8 value maintains acceptable surface quality on many components. Mechanically, the insert body and geometry are designed to withstand the forces of conventional turning, making it suitable for batch production and mixed‑complexity shops that require repeatable results.

Application guidance and process reliability

This insert is supplied in the Walter Tools open series and should be selected according to the specific material matrix of the workpiece. The WS10 grade and NFT chipbreaker provide a good starting point for common steels and general turning tasks, but process optimisation—feed, speed and depth of cut—should be adjusted for each application to achieve the best economy. For shops seeking reduced tool change frequency and stable surface finishes, this combination supports a cost‑effective machining strategy while keeping setup complexity low.

For reliable production and application support with Walter Tools inserts, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or via +49 2822 7131930

Technical data

• Article number: DNGG150608-NFT-WS10-WALTER
• SKU: DNGG150608-NFT-WS10-WALTER
• Designation: DNGG150608-NFT
• ISO designation: DNGG150608-NFT WS10
• Manufacturer: Walter Tools

Facts

• Size: 15
• Thickness: 06
• Corner radius: 0.8
• Rake angle: 0° (negative)
• Tolerance class: G

Special features

• Coated carbide grade WS10
• NFT chipbreaker
• Rhombic 55° plate form
• Series: Walter Schneidstoffsorte - Serie offen
• Execution: G
• Catalogue‑dependent material information

FAQ

What materials is this insert suitable for? The DNGG150608‑NFT WS10 is a coated‑carbide insert from Walter Tools intended for general turning; the exact workpiece suitability should be checked against the product matrix for WS10.

How does the NFT chipbreaker improve production? The NFT chipbreaker on this turning insert promotes short, controlled chips, reducing interruptions for chip removal and supporting steadier cycle times in batch production.

What does a 0° negative rake mean for cutting behaviour? A 0° negative rake on the insert provides a robust cutting edge that resists chipping under heavier cuts or interrupted cuts, helping to maintain consistent tool life and dimensional stability.

Can this insert be used for finishing passes? With its rhombic 55° geometry and 0.8 corner radius, the insert balances edge strength and finish capability; lighter feeds and speeds improve surface finish when used for finishing operations.

Is the WS10 grade coated or uncoated? WS10 is specified as a coated carbide grade in the Walter Tools series, offering enhanced wear resistance compared with uncoated grades.

Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen

Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.