40 x 25 x 1.6 x 40D Granulator/Chipper Knife M2 1.3343 DMo5 - MetavCUT

Take advantage of precise M2 (1.3343 / DMo5) high‑speed steel, exact 40 x 25 x 1.6 x 40D dimensions and a design optimised for continuous operation to keep production steady and pellet quality consistent. Order replacements or discuss suitability directly with Metav Werkzeuge for a reliable supply chain solution.

Shredder and granulator cutter 40 x 25 x 1.6 x 40D — MetavCUT M2 HSS blade

The shredder and granulator cutter 40 x 25 x 1.6 x 40D is a replacement cutting blade designed for ECON recycling and granulating equipment, providing a precision fit and durable cutting performance in industrial recycling applications.

• M2 high‑speed steel construction
• Exact 40 x 25 x 1.6 x 40D dimensions
• Sharp edge for uniform pellets
• Compatible with ECON recycling machinery

Consistent pellet quality through precision materials

Made from M2 (1.3343 / DMo5) high‑speed steel, this cutter combines hardness and toughness to deliver a consistently sharp cutting edge. The material selection reduces micro‑fracture and wear during high‑speed cutting, which in turn supports uniform pellet sizes and reduced dust generation. For operators of granulators and shredders, this translates into fewer rejects and less downstream screening, improving overall process efficiency.

Exact dimensions for fast installation and reliable running

The specified 40 x 25 x 1.6 x 40D geometry ensures a precise mechanical fit in compatible ECON machines, eliminating the need for on‑site modification. A correct fit maintains blade alignment and cutting geometry, which helps keep the rotor balance and reduces vibration. Faster changeovers and consistent alignment directly support higher machine availability and predictable maintenance intervals.

Designed for demanding recycling workflows

Blades used in shredders and granulators face a mix of materials and operating stresses; this cutter is engineered for that environment. Its geometry and edge preparation are aimed at processing plastics, film remnants and sprues with minimal smearing and clogging. The result is steady throughput and a clean cut surface that eases downstream handling and reduces energy consumption per tonne processed.

Serviceable design that supports cost efficiency

The hardness and grindability of M2 allow for multiple re‑sharpening cycles where appropriate, extending the useful life compared with coated low‑grade steels. By enabling controlled reconditioning, the cutter offers a cost‑effective balance between initial blade performance and long‑term tool economy. For budget‑conscious operations, this combination of performance and serviceability lowers total cost of ownership across production runs.

Application focus and operational benefits

Intended for use in ECON recycling, shredding and pelletising systems, the blade contributes directly to product consistency and plant reliability. Sharp, correctly dimensioned knives improve cut geometry, reduce fines and help maintain melt quality in granulation lines. Choosing a blade with industrial specification promotes safer operation and predictable maintenance planning, aligning with lean production goals.

Contact Metav Werkzeuge for a tailored replacement blade and technical guidance for ECON machines; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility, delivery and reconditioning options

Technical data

• Article number: ECON--40x25x1.6x40D-M2-13343-DMo5
• Description: Shredder and granulator cutter 40 x 25 x 1.6 x 40D for ECON machines
• Material: M2 (1.3343 / DMo5) high‑speed steel
• Manufacturer: MetavCUT

Facts

• Dimensions: 40 x 25 x 1.6 x 40D

Special features

• Application: Recycling, shredding and granulating of plastics
• Compatibility: Designed for ECON recycling and pelletising equipment
• Wear characteristics: Hardened high‑speed steel for extended service life

FAQ

What materials is this cutter intended for?
The cutter is specified for use in recycling and granulating workflows processing various plastics; the MetavCUT shredder and granulator cutter (SKU ECON--40x25x1.6x40D-M2-13343-DMo5) is engineered to handle film, sprues and general plastic offcuts.

Is this blade compatible with all ECON machines?
Compatibility is intended for ECON recycling and granulating machines that accept the 40 x 25 x 1.6 x 40D geometry; confirm machine specifications before installation.

Can the blade be re‑sharpened?
Yes. The M2 (1.3343 / DMo5) high‑speed steel composition permits controlled re‑sharpening to extend blade life while maintaining cutting performance.

How does the blade affect pellet quality?
A sharp, precisely ground edge contributes to uniform pellet dimensions and reduced dust, improving downstream processing and product consistency.

Which part identifier should be used when ordering replacements?
Use the SKU ECON--40x25x1.6x40D-M2-13343-DMo5 and specify MetavCUT as the brand to ensure the correct replacement item is supplied.

Manufacturer / Responsible: MetavCUT / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Wir bieten mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz ausgelegt.