200 g Precision Caliper Density Balance 0.001 g Readability, LCD, Plastic Pan 82 mm - KERN

Take advantage of reliable Li‑Ion power and long operating times for uninterrupted weighing: the external battery pack delivers up to 30 h runtime without backlight and recharges in around 10 h, making it a practical choice for portable and occasional mains-free use. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. KS-A01 External battery pack for ECE tabletop scales — KERN, Li‑Ion, up to 30 h runtime The KS-A01 is an external Li‑Ion battery pack designed to supply KERN ECE tabletop scales with portable, mains-free power for mobile weighing tasks and temporary installations. External Li‑Ion power for ECE tabletop scales Runtime up to 30 h without backlight Approx. 10 h recharge time Lightweight at 0.45 kg for easy handling Portable power for uninterrupted weighing The KS‑A01 external battery pack provides a dependable alternative to mains operation for ECE tabletop scales, ensuring continued measurement processes during site moves, temporary workstations or power interruptions. With up to 30 h runtime without backlight, the unit supports extended periods of use before recharge is required, reducing downtime and the need for repeated battery changes. The compact Li‑Ion energy source combines energy density with a small footprint, so weighing processes remain consistent and predictable across shifts. Clear charging expectations and energy efficiency The pack requires approximately 10 h for a full recharge, a duration that suits overnight charging routines or end-of-shift replenishment. Li‑Ion technology offers high energy efficiency compared with older chemistries, which translates into longer operating intervals for the same physical battery size. This predictable recharge window allows planning of maintenance cycles and minimises the risk of unexpected interruptions during critical weighing operations. Workshop integration and practical handling benefits Weighing equipment benefits from a lightweight external supply: at 0.45 kg, the battery pack is easy to carry and store, supporting mobile workflows and frequent relocation of scales. Compatibility with ECE tabletop models enables straightforward integration into existing setups without complex adjustments. Delivered as a dedicated external power solution, the unit simplifies logistics for occasional mains‑free weighing and supports operational flexibility in labs, workshops and production lines. Arrange application advice or secure stock through Metav Werkzeuge — contact our Emmerich team for tailored recommendations on the KERN KS‑A01 external battery pack and its suitability for your weighing tasks. Technical data Article number: KS SKU: KS-A01 Manufacturer: KERN GTIN: 4045761208537 Country of origin: CN Commodity code: 85076000 Core specifications Weight: 0.45 kg Recharge time: 10 h Battery runtime: up to 30 h without backlight eClass: 21059207 Features & compatibility Li‑Ion battery technology External operation for ECE tabletop scales Portable design for mobile use Intended to extend operational time without mains FAQ How long does the battery run on a single charge? The external battery pack provides up to 30 h runtime without backlight, as specified for the KS‑A01. How long does it take to recharge the pack fully? A full recharge takes approximately 10 h, allowing overnight replenishment between shifts. Which scales is the pack designed for? The KS‑A01 is intended for use with ECE tabletop scales and serves as an external power supply for mains‑free operation. What is the weight and handling advantage of the battery pack? At 0.45 kg, the pack is lightweight and convenient for mobile weighing tasks and frequent relocation. Who manufactures the battery pack? The unit is manufactured by KERN; for procurement and technical enquiries, Metav Werkzeuge can provide detailed advice and supply options Manufacturer: KERN — Origin: China; For product enquiries and distributor contact: Metav Werkzeuge, Emmerich am Rhein — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930

The combination of OIML Class F1 accuracy, a 1 g nominal mass and a polished stainless steel surface ensures traceable, repeatable results in verification tasks. Choose this single calibration weight for consistent scale checks and straightforward handling — order the KERN 326-01 directly via Metav Werkzeuge or consult our advisors if required. KERN 326-01 Calibration weight — 1 g, OIML Class F1, polished stainless steel A precision single calibration weight KERN 326-01 for laboratory and workshop scale verification, supplied in an ergonomic Eco‑Form for safe handling and reliable routine checks. OIML Class F1 accuracy Nominal mass 1 g Polished stainless steel surface Eco‑Form for ergonomic handling Precision that fits laboratory routines The KERN 326-01 delivers OIML Class F1 conformity with a tolerance of 0.1 mg, providing a high level of metrological reliability for verification and routine checks of analytical and precision balances. The small 1 g mass and compact dimensions make it suitable for frequent use where tight tolerances matter; the class designation indicates suitability for laboratory and calibration tasks that require consistent repeatability. Technical terms: OIML Class F1 denotes an internationally recognised tolerance band for test weights used in calibration and verification. Designed for safe handling and clear traceability Shaped in an Eco‑Form, the mass is easier to lift and position without compromising contact points on the balance pan, reducing handling error during routine procedures. The polished stainless steel finish improves resistance to corrosion and simplifies cleaning, supporting long service life in workshop and lab environments. Traceability is supported by adherence to OIML classification, enabling integration into regular quality workflows and documentation practices. Built for durability and straightforward integration Constructed from polished stainless steel, this single weight resists surface degradation and preserves its nominal value under normal handling conditions, lowering the need for frequent replacement. The compact design and clear classification make integration into existing verification schedules uncomplicated, supporting efficiency and compliance in environments where reliable mass standards are essential. For reliable OIML Class F1 verification with a compact single weight, contact Metav Werkzeuge in Emmerich for tailored supply and delivery details — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 326 SKU: 326-01 Manufacturer: KERN GTIN: 4045761223745 Eclass: 32120103 Customs tariff number: 84239090 Origin country: Germany Core technical data Nominal mass: 1 g Tolerance (OIML F1): 0.1 mg Materials & features Material: polished stainless steel Form: Eco‑Form OIML class: F1 Cylinder dimensions: 6×6 mm FAQ What level of accuracy does this calibration weight provide? The KERN 326-01 calibration weight (single weight, SKU 326-01) conforms to OIML Class F1 with a tolerance of 0.1 mg, making it suitable for precise verification tasks. Is the KERN 326-01 suitable for laboratory balances? Yes, the KERN 326-01 is designed for verification of analytical and precision balances where OIML Class F1 accuracy is required. What material is used and how does it affect maintenance? The weight is made of polished stainless steel; this finish reduces corrosion risk and simplifies cleaning for durable service life. How does the Eco‑Form shape benefit routine checks? The Eco‑Form provides an ergonomic grip that reduces handling errors and contact with balance surfaces, improving consistency during repeated measurements. Does the data include origin and classification details for documentation? The KERN 326-01 includes an OIML class designation (F1) and origin information (Germany) suitable for inclusion in verification documentation and traceability records. KERN — Origin: Germany. Manufacturer address and contact not specified.

Benefit from precise, repeatable density testing for liquids and solids with a density greater than 1 through the combination of a stable beaker support bridge and a 139 mm suspension hook, which together ensure consistent sample mounting and reliable weighing. Order the KERN YDB-04 via Metav Werkzeuge or consult our advisors for compatibility and fast delivery from Emmerich. KERN YDB-04 — Accessory set for density determination, includes beaker support bridge Ø102 mm The KERN YDB-04 accessory set supports density determination of liquids and solids with densities greater than 1, intended for use with compatible laboratory and industrial weighing instruments to enable stable submerged or suspended sample weighing. Beaker support bridge Ø102 mm Hook H 139 mm for suspension Compatible with Ø82 mm weighing pans Lightweight accessory, 0.05 kg Stable mounting for consistent density determination The accessory set provides a beaker support bridge and a suspension hook that create a reproducible mounting for samples and beakers during density measurements. By fixing the beaker at a defined position and suspending the test specimen from a dedicated hook, the arrangement reduces measurement variances caused by movement or inconsistent immersion depth. This results in more consistent results when applying buoyancy-based or comparative weighing methods to determine specific density, particularly for samples and liquids above the specified density threshold. Rapid installation and broad scale compatibility Designed for straightforward attachment, the accessory set is compatible with weighing pans of Ø82 mm, allowing integration with a wide range of bench and laboratory scales without the need for bespoke adaptors. The included beaker support accepts a beaker with a diameter of Ø102 mm and the hook provides a clear suspension height of H 139 mm, which simplifies setup and repeatability. The quick mechanical fit saves calibration time and supports uninterrupted workflows in small-scale quality control and workshop environments. Practical handling and workshop suitability Weighing in at just 0.05 kg, the set is a lightweight aid that is easy to position and store, while the supplied bridge and hook are intended to withstand routine handling in production or laboratory areas. The compact design reduces the risk of interference with the weighing instrument’s draft shield and facilitates fast sample exchange, helping to keep measurement throughput steady. If there is any uncertainty about fitment or intended use, Metav Werkzeuge provides advice to ensure the accessory matches the specific scale model and measurement routine. Contact Metav Werkzeuge to confirm compatibility with existing scales and secure the KERN YDB-04 accessory set from our Emmerich stock for dependable density testing Technical data Article number: YDB-04 Manufacturer: KERN GTIN: 4045761230293 Facts Weight: 0.05 kg Beaker support diameter: Ø102 mm Hook height: H 139 mm Special features Compatible with weighing pans Ø82 mm Includes beaker support bridge and hook Origin: CN FAQ What is the accessory set used for? The KERN YDB-04 accessory set is used for density determination of liquids and solids with a density greater than 1 by providing a stable beaker support and suspension hook for reproducible weighing procedures. Which scales is the set compatible with? Compatibility is intended for models with weighing pans of Ø82 mm; the set fits standard bench and laboratory scales that accept this pan diameter. What is included in the delivery of the accessory set? Delivery contains a beaker support bridge for Ø102 mm beakers and a hook with a suspension height of H 139 mm as specified for the KERN YDB-04. Can the set be used for fluids with density below 1? The accessory set is designed for density determination of liquids and solids with density greater than 1; for applications below this range, alternative procedures or accessories should be considered. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930