2000g Precision Caliper-Style School Balance With Density Determination, 0.01g Readability - KERN

Combine precise density analysis with a complete accessory set and compatibility for seamless integration into existing weighing workflows; benefit from straightforward handling and reliable results. Order the kit directly via Metav Werkzeuge or contact our consultants for tailored advice. Density Determination Set YDB-02 — large beaker, KERN compatible The Density Determination Set is a complete accessory kit for determining the density of liquids and solids, designed for use with precision scales and laboratory environments. Density measurement for liquids & solids ≤/≥ 1 Includes weighing plate, beaker, sample holder, sinker Compatible with precision scale KERN EMB 2000-2V Large beaker for easier handling and visual reading Ensure reliable material decisions with precise density verification Accurate density values are essential for quality control, material sorting and verification tasks. This accessory kit enables density checks for both liquids and solids with densities at or below / at or above 1, supporting standard determination procedures used in laboratories and production control. The set simplifies the comparative measurement method by providing a stable base for immersion and a clear vessel for observation, helping to reduce handling errors and improve repeatability when paired with a calibrated scale. Fast installation and compatibility with existing precision scales Designed for direct use alongside established weighing instruments, the kit offers straightforward compatibility with the KERN EMB 2000-2V precision scale. Integration minimises setup time and streamlines routine testing, allowing metrology routines to run without additional adapters. The clear technical fit and familiar handling mean measurement cycles are shortened, which supports higher throughput in testing stations and reduces downtime during batch inspections. Ready-to-use accessories that save time in the workshop and lab The set includes a weighing plate, a robust beaker, a sample holder and a sinker, supplied as a single organised ensemble to cut preparation steps. The large beaker improves visibility and handling when submerging samples, while the precisely matched plate provides a stable contact surface for consistent readings. Compact and portable at around 1.6 kg total, the kit is easy to position next to production lines or benchtop balances, enabling rapid checks without elaborate laboratory setups. Versatile testing for routine quality assurance and material characterisation Built for everyday metrology tasks, the kit supports a range of applications from incoming goods inspection to process control. The combination of compact accessories and proven handling methods means reproducible results across multiple sample types. Supplied by the reputable manufacturer KERN and distributed through Metav Werkzeuge’s European hub, the ensemble aligns practical usability with dependable sourcing for workshops and laboratories seeking consistent measurement outcomes. For precise density analysis and expert advice on the KERN YDB-02 density determination set, contact Metav Werkzeuge in Emmerich for professional guidance and reliable delivery to your workshop Technical Data Article number: YDB-02 SKU: YDB-02 GTIN: 4045761147393 Manufacturer: KERN Country of origin: DE Facts Weight: 1.6 kg Dimensions: 135 x Ø100 mm ECLASS: 32120490 Tariff number: 90160090 Special features Includes weighing plate, beaker, sample holder and sinker Suitable for density determination of liquids and solids with density ≤/≥ 1 Compatible with precision scale KERN EMB 2000-2V Category: Scales accessories (Zubehör) Designation: Density Determination Set with large beaker FAQ How is density measured with this accessory set? The KERN Density Determination Set (YDB-02) is used in conjunction with a precision balance to compare mass in air and immersed mass, following standard immersion-based density methods for liquids and solids. Is the kit compatible with my KERN precision scale? Compatibility is explicitly stated for the KERN EMB 2000-2V; the accessories are designed to integrate with that model’s platform and handling characteristics. What exactly is included in the delivery? Delivery of the YDB-02 includes a weighing plate, a beaker, a sample holder and a sinker as the complete accessory set for density testing. Can the set be used in both laboratory and workshop environments? Yes, the kit’s components and durable beaker make the YDB-02 suitable for controlled laboratory use and routine workshop quality checks. Are there size or weight considerations for installation? The complete set is compact and portable, with a total weight of approximately 1.6 kg and dimensions of 135 x Ø100 mm, allowing easy placement beside benchtop balances. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930

Take advantage of reliable Li‑Ion power and long operating times for uninterrupted weighing: the external battery pack delivers up to 30 h runtime without backlight and recharges in around 10 h, making it a practical choice for portable and occasional mains-free use. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. KS-A01 External battery pack for ECE tabletop scales — KERN, Li‑Ion, up to 30 h runtime The KS-A01 is an external Li‑Ion battery pack designed to supply KERN ECE tabletop scales with portable, mains-free power for mobile weighing tasks and temporary installations. External Li‑Ion power for ECE tabletop scales Runtime up to 30 h without backlight Approx. 10 h recharge time Lightweight at 0.45 kg for easy handling Portable power for uninterrupted weighing The KS‑A01 external battery pack provides a dependable alternative to mains operation for ECE tabletop scales, ensuring continued measurement processes during site moves, temporary workstations or power interruptions. With up to 30 h runtime without backlight, the unit supports extended periods of use before recharge is required, reducing downtime and the need for repeated battery changes. The compact Li‑Ion energy source combines energy density with a small footprint, so weighing processes remain consistent and predictable across shifts. Clear charging expectations and energy efficiency The pack requires approximately 10 h for a full recharge, a duration that suits overnight charging routines or end-of-shift replenishment. Li‑Ion technology offers high energy efficiency compared with older chemistries, which translates into longer operating intervals for the same physical battery size. This predictable recharge window allows planning of maintenance cycles and minimises the risk of unexpected interruptions during critical weighing operations. Workshop integration and practical handling benefits Weighing equipment benefits from a lightweight external supply: at 0.45 kg, the battery pack is easy to carry and store, supporting mobile workflows and frequent relocation of scales. Compatibility with ECE tabletop models enables straightforward integration into existing setups without complex adjustments. Delivered as a dedicated external power solution, the unit simplifies logistics for occasional mains‑free weighing and supports operational flexibility in labs, workshops and production lines. Arrange application advice or secure stock through Metav Werkzeuge — contact our Emmerich team for tailored recommendations on the KERN KS‑A01 external battery pack and its suitability for your weighing tasks. Technical data Article number: KS SKU: KS-A01 Manufacturer: KERN GTIN: 4045761208537 Country of origin: CN Commodity code: 85076000 Core specifications Weight: 0.45 kg Recharge time: 10 h Battery runtime: up to 30 h without backlight eClass: 21059207 Features & compatibility Li‑Ion battery technology External operation for ECE tabletop scales Portable design for mobile use Intended to extend operational time without mains FAQ How long does the battery run on a single charge? The external battery pack provides up to 30 h runtime without backlight, as specified for the KS‑A01. How long does it take to recharge the pack fully? A full recharge takes approximately 10 h, allowing overnight replenishment between shifts. Which scales is the pack designed for? The KS‑A01 is intended for use with ECE tabletop scales and serves as an external power supply for mains‑free operation. What is the weight and handling advantage of the battery pack? At 0.45 kg, the pack is lightweight and convenient for mobile weighing tasks and frequent relocation. Who manufactures the battery pack? The unit is manufactured by KERN; for procurement and technical enquiries, Metav Werkzeuge can provide detailed advice and supply options Manufacturer: KERN — Origin: China; For product enquiries and distributor contact: Metav Werkzeuge, Emmerich am Rhein — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930

Take advantage of precise conformity and robust construction combined for dependable calibration routines; the OIML F1 tolerance and polished stainless steel finish ensure reproducible results and long service life. Order the KERN 326-12 calibration weight directly via Metav Werkzeuge or ask our consultants if needed. KERN 326-12 calibration weight — 2 kg, OIML F1, polished stainless steel The KERN 326-12 calibration weight is a single precision mass in Eco‑Form for laboratory and workshop calibration of balances and scales. OIML class F1 for verified accuracy Nominal mass 2 kg in Eco‑Form Polished stainless steel construction Compact cylinder 60 × 102 mm Accuracy that integrates with calibration routines The OIML F1 classification of this calibration mass provides a clearly defined tolerance of 10 mg, making it suitable for routine verification and adjustment of precision balances where class F1 is required. Specification conformity reduces uncertainty in measurement chains and supports documented traceability when used as part of a calibration procedure. The nominal 2 kg mass and certified tolerance mean fewer intermediate checks are necessary, contributing to greater operational efficiency and consistent measurement results. Durable form and material for frequent handling Manufactured in polished stainless steel, the Eco‑Form cylinder is designed for daily handling and easy cleaning while resisting corrosion and surface damage. The compact 60 × 102 mm cylinder profile gives a small footprint in storage and a stable centre of gravity during use, aiding repeatable placement on balance plates. The smooth finish minimises contamination risk and simplifies maintenance, which helps to preserve calibration quality over time. Operational benefits: predictable workflow and reduced downtime Using a certified single mass streamlines verification steps and shortens calibration routines, delivering measurable time savings in busy workshops and service departments. The robust construction supports repeated handling without rapid wear, so calibration intervals remain stable and service interruptions are reduced. Combined with documented conformity, this mass supports reliable inventory of test equipment and sound quality assurance processes in production and lab environments. For supply and specialist advice on OIML F1 calibration masses, contact Metav Werkzeuge in Emmerich for sourcing and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 326-12 Article number: 326 GTIN: 4045761223646 Manufacturer: KERN Country of origin: Germany Dimensions & tolerances Nominal mass: 2 kg Cylinder dimensions: 60 × 102 mm OIML class: F1 Tolerance (OIML F1): 10 mg Special features Eco‑Form design Polished stainless steel material Single calibration weight HS code: 84239090 FAQ Is this calibration weight suitable for routine balance verification? The KERN 326-12 calibration weight (OIML class F1) is intended for routine verification and adjustment of precision balances where F1 tolerance is specified. How should the stainless steel weight be stored to maintain accuracy? Store the KERN 326-12 in a clean, dry environment at stable temperature and avoid direct contact with corrosive substances to preserve surface condition and measurement stability. Can this weight be used for legal-for-trade calibrations? The OIML F1 classification indicates suitability for laboratory and industrial calibration tasks; legal-for-trade requirements depend on local regulations and may require different OIML classes. What practical advantage does the Eco‑Form bring? The Eco‑Form provides a compact, stable profile that eases handling and storage while maintaining the required mass distribution for repeatable placements on balance platforms. Manufacturer: KERN, Germany. Contact details not provided.

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930