12000 g Precision Laboratory Balance 0.1 g Readability Large 175×190 mm Pan LCD Display - KERN
€230.00
Product information "12000 g Precision Laboratory Balance 0.1 g Readability Large 175×190 mm Pan LCD Display - KERN"
Take advantage of an economical yet precise weighing solution with a large, shockproof weighing plate, 0.1 g readability and a compact, flat design that saves bench space. Benefit from straightforward calibration via the CAL program and flexible power options, and order directly through Metav Werkzeuge or consult our specialists for application advice.
KERN EMS 12K0.1 — School laboratory balance with 12,000 g capacity and 0.1 g readability
A KERN EMS 12K0.1 is a low-cost laboratory balance designed for education, training and routine laboratory tasks, combining a large weighing surface with simple operation for dependable everyday use
- Low-cost laboratory balance with large weighing plate
- 12,000 g capacity with 0.1 g readability
- Ergonomic keypad and high-contrast LCD display
- CAL calibration program and multiple power options
Precise measurement performance for teaching and routine labs
The balance delivers 0.1 g readability across a 12,000 g capacity, supported by a strain gauge weighing system that ensures consistent results. The instrument’s reproducibility of 0.1 g and linearity of ±0.3 g provide a reliable statistical basis for classroom experiments and basic quality checks. Where piece counting is required, the device achieves a smallest piece weight of 200 mg in precision mode and 2 g in normal counting mode, allowing simple inventory or sample tasks to be completed with confidence. These measurable specifications translate directly into predictable outcomes in teaching and standard laboratory routines.
Designed for ease of use and robust daily handling
Operation focuses on clarity and ergonomics: a 25 mm high-contrast LCD display and a keypad with large buttons make inputs and readings quick and reliable even under busy teaching conditions. The large, shockproof weighing plate (175 × 190 mm) and a plastic housing contribute to a lightweight overall package at approximately 1.45 kg, while non-slip rubber feet secure the unit on benchtops. The flat, compact footprint (200 × 270 × 63 mm) conserves workspace and simplifies storage. These features reduce handling errors and speed up lesson flow, so practical sessions run more smoothly.
Calibration, power supply and adaptable operation
A built-in CAL calibration program permits straightforward adjustment of accuracy; external calibration weights are available separately for verification and traceability. Power is via a supplied mains adaptor (adapters for CH, EURO, UK, US included) or optional battery operation using a standard 9 V block, with an estimated battery runtime of 40 h. Such flexibility supports classroom use in fixed lab benches or mobile setups. The unit’s simple weighing mechanics make maintenance and checks uncomplicated, supporting uninterrupted teaching schedules.
Fit for education, veterinary and basic laboratory tasks
This model suits school laboratories, vocational training, veterinary practices for small-animal weighing and general-purpose lab analyses where reliable, cost-efficient performance is required. The combination of a large weighing area, robust surface and clear display makes it especially appropriate for teaching environments that demand durability and straightforward operation. Metav Werkzeuge’s approach to democratising precision ensures that these practical measuring tools are accessible to workshops and educational institutions while maintaining consistent quality from stock in Emmerich.
For dependable school and routine laboratory weighing choose the KERN EMS 12K0.1 through Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply details
Technical data
- Article number: EMS.12K0.1
- SKU: EMS.12K0.1
- GTIN: 4045761124417
- Manufacturer: KERN
- Country of origin: CN
Facts
- Capacity: 12,000 g
- Readability: 0.1 g
- Reproducibility: 0.1 g
- Linearity: ±0.3 g
- Smallest piece weight (laboratory): 200 mg
- Smallest piece weight (normal): 2 g
- Display digit height: 25 mm
- Battery type: 9 V block
- Battery runtime: 40 h
- Weight: 1.45 kg
- Dimensions (housing without removable parts): 200 × 270 × 63 mm
- Weighing plate (rectangular): 175 × 190 mm
- Operating temperature: 5°C–35°C
- Max ambient humidity: 80%
Special features
- Housing and weighing plate made of plastic
- Large, shockproof weighing plate
- Particularly flat design for easy storage
- Ergonomically optimised keypad with large buttons
- High-contrast LCD display
- Non-slip rubber feet for secure placement
- CAL calibration programme (external weights available separately)
- Mains adaptor included with CH, EURO, UK, US plugs
- Optional battery operation
- Strain gauge weighing system
FAQ
How accurate is the balance for classroom experiments?
The KERN EMS 12K0.1 offers 0.1 g readability, reproducibility of 0.1 g and linearity of ±0.3 g, making it suitable for many teaching and routine lab measurements.
Can the unit run on batteries for mobile demonstrations?
Yes, the model supports a 9 V block battery and achieves approximately 40 h battery life; mains operation is available via the supplied adaptor set.
Is the weighing surface robust enough for everyday school use?
The device features a large, shockproof weighing plate and a plastic housing designed for the demands of education and training environments.
Does the balance support piece counting and how small can items be?
Piece counting is supported with a smallest piece weight of 200 mg in laboratory counting mode and 2 g in normal counting mode.
Manufacturer: KERN — Address: not provided — Contact: not provided
Zubehör
Robust stainless-steel construction and precise compatibility ensure dependable protection for precision balances; the plate’s lightweight design and exact fit for 175×190 mm pans permit quick retrofitting with minimal disruption. Order the stainless-steel weighing plate EMS-A01 directly via Metav Werkzeuge or ask our consultants if needed. Stainless-steel Weighing Plate EMS-A01 — KERN accessory for 175×190 mm pans The Stainless-steel Weighing Plate EMS-A01 is a replacement weighing pan designed for KERN precision scales, intended to provide a corrosion-resistant surface and consistent load distribution on models with a 175×190 mm weighing plate size. Stainless-steel construction Exact fit for KERN precision scales Designed for 175×190 mm weighing pans Lightweight 0.35 kg for easy handling Protects the balance and supports accurate results The stainless-steel surface offers a durable and corrosion-resistant contact area that reduces wear on the original weighing pan and helps maintain accurate weighing over time. A flat and stable pan surface prevents uneven load distribution, which can introduce measurement error; by replacing or fitting a correctly sized pan, the measuring system retains its calibrated behaviour. The robust material also tolerates routine cleaning, limiting contamination and ensuring consistent performance in workshop or laboratory environments. Simple retrofit reduces downtime and installation effort Designed as a direct accessory for KERN precision scales, the plate is produced to the matching dimensions for pans of 175×190 mm, enabling a straight swap or upgrade without mechanical modification. At 0.35 kg, the component is light enough for one-person handling yet rigid enough to sit securely on the weighing module. This compatibility avoids recalibration cycles beyond routine checks, so operational interruptions are kept to a minimum while maintaining traceable measurement conditions. Enhances workshop efficiency and purchasing confidence Using a dedicated stainless-steel pan supports hygienic routines and reduces maintenance time, which translates into lower process interruptions and a clearer workflow. Sourcing accessories via an experienced distributor adds assurance: Metav Werkzeuge provides a broad selection of metrology products from a single point, backed by long-standing market experience and centralised supply logistics. Choosing a purpose-made accessory contributes to predictable service intervals and sustained measurement reliability. For reliable retrofitting of KERN precision scales, request the EMS-A01 stainless-steel weighing plate from Metav Werkzeuge — our consultants can confirm model compatibility and delivery options to your workshop. Technical Data Article number: EMS-A01 Manufacturer: KERN GTIN: 4045761152892 Core technical data Weight: 0.35 kg Eclass: 27320102 Tariff code: 84239010 Special features Stainless-steel weighing plate Compatible with KERN precision scales (175×190 mm pan) Category path: Waagen > Zubehör Origin: CN FAQ Is the plate compatible with all KERN precision scales? Compatibility is limited to KERN models that use a 175×190 mm weighing pan; the EMS-A01 is manufactured to match those dimensions for a secure fit. Does the weighing plate affect calibration requirements? Fitting the EMS-A01 should not necessitate full recalibration beyond standard verification procedures, provided the plate is installed on a matching KERN precision scale. How should the stainless-steel plate be cleaned? Clean with a mild detergent and soft cloth; avoid abrasive cleaners to preserve the surface and ensure ongoing measurement integrity of the KERN accessory. What are the handling considerations for installation? The plate’s 0.35 kg mass allows single-person handling; ensure the balance is level and stable during replacement to maintain accurate weighing results. KERN — Address: not specified — Contact: not specified
Take advantage of reliable Li‑Ion power and long operating times for uninterrupted weighing: the external battery pack delivers up to 30 h runtime without backlight and recharges in around 10 h, making it a practical choice for portable and occasional mains-free use. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. KS-A01 External battery pack for ECE tabletop scales — KERN, Li‑Ion, up to 30 h runtime The KS-A01 is an external Li‑Ion battery pack designed to supply KERN ECE tabletop scales with portable, mains-free power for mobile weighing tasks and temporary installations. External Li‑Ion power for ECE tabletop scales Runtime up to 30 h without backlight Approx. 10 h recharge time Lightweight at 0.45 kg for easy handling Portable power for uninterrupted weighing The KS‑A01 external battery pack provides a dependable alternative to mains operation for ECE tabletop scales, ensuring continued measurement processes during site moves, temporary workstations or power interruptions. With up to 30 h runtime without backlight, the unit supports extended periods of use before recharge is required, reducing downtime and the need for repeated battery changes. The compact Li‑Ion energy source combines energy density with a small footprint, so weighing processes remain consistent and predictable across shifts. Clear charging expectations and energy efficiency The pack requires approximately 10 h for a full recharge, a duration that suits overnight charging routines or end-of-shift replenishment. Li‑Ion technology offers high energy efficiency compared with older chemistries, which translates into longer operating intervals for the same physical battery size. This predictable recharge window allows planning of maintenance cycles and minimises the risk of unexpected interruptions during critical weighing operations. Workshop integration and practical handling benefits Weighing equipment benefits from a lightweight external supply: at 0.45 kg, the battery pack is easy to carry and store, supporting mobile workflows and frequent relocation of scales. Compatibility with ECE tabletop models enables straightforward integration into existing setups without complex adjustments. Delivered as a dedicated external power solution, the unit simplifies logistics for occasional mains‑free weighing and supports operational flexibility in labs, workshops and production lines. Arrange application advice or secure stock through Metav Werkzeuge — contact our Emmerich team for tailored recommendations on the KERN KS‑A01 external battery pack and its suitability for your weighing tasks. Technical data Article number: KS SKU: KS-A01 Manufacturer: KERN GTIN: 4045761208537 Country of origin: CN Commodity code: 85076000 Core specifications Weight: 0.45 kg Recharge time: 10 h Battery runtime: up to 30 h without backlight eClass: 21059207 Features & compatibility Li‑Ion battery technology External operation for ECE tabletop scales Portable design for mobile use Intended to extend operational time without mains FAQ How long does the battery run on a single charge? The external battery pack provides up to 30 h runtime without backlight, as specified for the KS‑A01. How long does it take to recharge the pack fully? A full recharge takes approximately 10 h, allowing overnight replenishment between shifts. Which scales is the pack designed for? The KS‑A01 is intended for use with ECE tabletop scales and serves as an external power supply for mains‑free operation. What is the weight and handling advantage of the battery pack? At 0.45 kg, the pack is lightweight and convenient for mobile weighing tasks and frequent relocation. Who manufactures the battery pack? The unit is manufactured by KERN; for procurement and technical enquiries, Metav Werkzeuge can provide detailed advice and supply options Manufacturer: KERN — Origin: China; For product enquiries and distributor contact: Metav Werkzeuge, Emmerich am Rhein — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930