3000 g Precision School/Teaching Laboratory Balance 0.01 g Readability, 175×190 mm Pan, LCD, CAL Function - KERN
€260.00
Product information "3000 g Precision School/Teaching Laboratory Balance 0.01 g Readability, 175×190 mm Pan, LCD, CAL Function - KERN"
Take advantage of precise measuring performance and a robust, low-profile design to ensure reliable results in teaching and routine laboratory tasks; combine 0.01 g readability with a large, shockproof weighing pan for fast, repeatable workflows and order via Metav Werkzeuge or request advice from our consultants.
KERN EMS 3000-2 — School laboratory balance with 3,000 g capacity and 0.01 g readability
A compact and durable KERN EMS 3000-2 laboratory balance designed for education, routine analyses and small-animal weighing in classrooms and training laboratories
- Readability 0.01 g for precise measurements
- Large shockproof plastic weighing pan
- Ergonomic keypad and 25 mm LCD digits
- Flat design with non-slip rubber feet
High-precision weighing that supports consistent results
The instrument delivers 0.01 g readability and reproducibility of 0.02 g, backed by a strain gauge system that converts mechanical load into a stable electrical signal. These specifications ensure that measured values are both repeatable and comparable, which is vital for teaching environments and basic quality checks. Linearity of ±0.05 g minimises systematic error across the full range, so experimental procedures and routine analyses remain trustworthy and easy to document.
Designed for everyday classroom use with robust handling
A large, shockproof weighing pan (175 × 190 mm) and a flat, low-profile housing reduce accidental damage and make placement of labware straightforward. The instrument weighs 1.58 kg and has compact external dimensions of 200 × 280 × 48 mm, supporting portability between benches while maintaining a stable footprint thanks to rubber feet. Power versatility is provided by the supplied plug-in adapter (CH, EURO, UK, US) and an optional 9 V block battery with approximately 40 h operating time, enabling uninterrupted use in varied teaching setups.
Simple calibration and an easy-to-read display for fast classroom workflows
An integrated CAL calibration programme allows straightforward adjustment of the balance using certified external weights (available as an optional accessory), making it straightforward to retain measurement accuracy over time. The ergonomically optimised keypad and high-contrast LCD with 25 mm digit height facilitate clear readings even from a short distance, reducing handling errors and supporting efficient instruction in laboratory techniques.
Versatile application range beyond basic weighing
While optimised for educational use, the unit supports a variety of tasks including standard laboratory analyses, basic quality assurance and small-animal weighing for veterinary training. Counting routines are supported with a minimum piece weight of 20 mg in laboratory mode and 200 mg in normal counting mode, assisting inventory and sample-preparation tasks. Environmental operating limits (5 °C–35 °C and up to 80% relative humidity) define suitable working conditions to maintain stable performance.
Choose the proven precision of KERN and contact Metav Werkzeuge in Emmerich for personalised advice and ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed product guidance
Technical data
- Article number: EMS.3000-2
- Manufacturer: KERN
- GTIN: 4045761133112
- Country of origin: CN
Facts
- Capacity: 3,000 g
- Readability: 0.01 g
- Reproducibility: 0.02 g
- Linearity: ±0.05 g
- Weighing pan (rectangular): 175 × 190 mm
- External dimensions: 200 × 280 × 48 mm
- Weight: 1.58 kg
- Display digit height: 25 mm
Special features
- Weighing system: strain gauge
- Housing and weighing pan: plastic
- CAL calibration programme (external test weights optional)
- Power supply: plug-in adapter (CH, EURO, UK, US)
- Optional battery: 9 V block, battery life approx. 40 h
- Operating temperature: 5 °C–35 °C
- Max relative humidity: 80%
- Suitable applications: school laboratories, routine analyses, small-animal weighing, quality assurance
FAQ
What maximum capacity does the balance have?
The balance offers a maximum capacity of 3,000 g, suitable for typical school and routine laboratory tasks with a 0.01 g readability.
How accurate and repeatable are results from this unit?
Accuracy features include readability 0.01 g, reproducibility 0.02 g and linearity of ±0.05 g, providing stable and repeatable measurements for educational and basic analytical work.
Can the balance be used without mains power?
Yes, the model supports an optional 9 V block battery with about 40 h runtime; mains adapters for CH, EURO, UK and US are supplied for flexible operation.
Is calibration simple to carry out in a school environment?
Calibration is facilitated by the integrated CAL programme; certified external weights (sold separately) are used to set and verify accuracy.
Which applications is the instrument suited for?
Typical uses include teaching in biology, chemistry and physics, standard laboratory analyses, basic quality assurance and small-animal weighing for veterinary education.
Manufacturer: KERN; Country of origin: CN
Zubehör
Robust stainless-steel construction and precise compatibility ensure dependable protection for precision balances; the plate’s lightweight design and exact fit for 175×190 mm pans permit quick retrofitting with minimal disruption. Order the stainless-steel weighing plate EMS-A01 directly via Metav Werkzeuge or ask our consultants if needed. Stainless-steel Weighing Plate EMS-A01 — KERN accessory for 175×190 mm pans The Stainless-steel Weighing Plate EMS-A01 is a replacement weighing pan designed for KERN precision scales, intended to provide a corrosion-resistant surface and consistent load distribution on models with a 175×190 mm weighing plate size. Stainless-steel construction Exact fit for KERN precision scales Designed for 175×190 mm weighing pans Lightweight 0.35 kg for easy handling Protects the balance and supports accurate results The stainless-steel surface offers a durable and corrosion-resistant contact area that reduces wear on the original weighing pan and helps maintain accurate weighing over time. A flat and stable pan surface prevents uneven load distribution, which can introduce measurement error; by replacing or fitting a correctly sized pan, the measuring system retains its calibrated behaviour. The robust material also tolerates routine cleaning, limiting contamination and ensuring consistent performance in workshop or laboratory environments. Simple retrofit reduces downtime and installation effort Designed as a direct accessory for KERN precision scales, the plate is produced to the matching dimensions for pans of 175×190 mm, enabling a straight swap or upgrade without mechanical modification. At 0.35 kg, the component is light enough for one-person handling yet rigid enough to sit securely on the weighing module. This compatibility avoids recalibration cycles beyond routine checks, so operational interruptions are kept to a minimum while maintaining traceable measurement conditions. Enhances workshop efficiency and purchasing confidence Using a dedicated stainless-steel pan supports hygienic routines and reduces maintenance time, which translates into lower process interruptions and a clearer workflow. Sourcing accessories via an experienced distributor adds assurance: Metav Werkzeuge provides a broad selection of metrology products from a single point, backed by long-standing market experience and centralised supply logistics. Choosing a purpose-made accessory contributes to predictable service intervals and sustained measurement reliability. For reliable retrofitting of KERN precision scales, request the EMS-A01 stainless-steel weighing plate from Metav Werkzeuge — our consultants can confirm model compatibility and delivery options to your workshop. Technical Data Article number: EMS-A01 Manufacturer: KERN GTIN: 4045761152892 Core technical data Weight: 0.35 kg Eclass: 27320102 Tariff code: 84239010 Special features Stainless-steel weighing plate Compatible with KERN precision scales (175×190 mm pan) Category path: Waagen > Zubehör Origin: CN FAQ Is the plate compatible with all KERN precision scales? Compatibility is limited to KERN models that use a 175×190 mm weighing pan; the EMS-A01 is manufactured to match those dimensions for a secure fit. Does the weighing plate affect calibration requirements? Fitting the EMS-A01 should not necessitate full recalibration beyond standard verification procedures, provided the plate is installed on a matching KERN precision scale. How should the stainless-steel plate be cleaned? Clean with a mild detergent and soft cloth; avoid abrasive cleaners to preserve the surface and ensure ongoing measurement integrity of the KERN accessory. What are the handling considerations for installation? The plate’s 0.35 kg mass allows single-person handling; ensure the balance is level and stable during replacement to maintain accurate weighing results. KERN — Address: not specified — Contact: not specified
Take advantage of reliable Li‑Ion power and long operating times for uninterrupted weighing: the external battery pack delivers up to 30 h runtime without backlight and recharges in around 10 h, making it a practical choice for portable and occasional mains-free use. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. KS-A01 External battery pack for ECE tabletop scales — KERN, Li‑Ion, up to 30 h runtime The KS-A01 is an external Li‑Ion battery pack designed to supply KERN ECE tabletop scales with portable, mains-free power for mobile weighing tasks and temporary installations. External Li‑Ion power for ECE tabletop scales Runtime up to 30 h without backlight Approx. 10 h recharge time Lightweight at 0.45 kg for easy handling Portable power for uninterrupted weighing The KS‑A01 external battery pack provides a dependable alternative to mains operation for ECE tabletop scales, ensuring continued measurement processes during site moves, temporary workstations or power interruptions. With up to 30 h runtime without backlight, the unit supports extended periods of use before recharge is required, reducing downtime and the need for repeated battery changes. The compact Li‑Ion energy source combines energy density with a small footprint, so weighing processes remain consistent and predictable across shifts. Clear charging expectations and energy efficiency The pack requires approximately 10 h for a full recharge, a duration that suits overnight charging routines or end-of-shift replenishment. Li‑Ion technology offers high energy efficiency compared with older chemistries, which translates into longer operating intervals for the same physical battery size. This predictable recharge window allows planning of maintenance cycles and minimises the risk of unexpected interruptions during critical weighing operations. Workshop integration and practical handling benefits Weighing equipment benefits from a lightweight external supply: at 0.45 kg, the battery pack is easy to carry and store, supporting mobile workflows and frequent relocation of scales. Compatibility with ECE tabletop models enables straightforward integration into existing setups without complex adjustments. Delivered as a dedicated external power solution, the unit simplifies logistics for occasional mains‑free weighing and supports operational flexibility in labs, workshops and production lines. Arrange application advice or secure stock through Metav Werkzeuge — contact our Emmerich team for tailored recommendations on the KERN KS‑A01 external battery pack and its suitability for your weighing tasks. Technical data Article number: KS SKU: KS-A01 Manufacturer: KERN GTIN: 4045761208537 Country of origin: CN Commodity code: 85076000 Core specifications Weight: 0.45 kg Recharge time: 10 h Battery runtime: up to 30 h without backlight eClass: 21059207 Features & compatibility Li‑Ion battery technology External operation for ECE tabletop scales Portable design for mobile use Intended to extend operational time without mains FAQ How long does the battery run on a single charge? The external battery pack provides up to 30 h runtime without backlight, as specified for the KS‑A01. How long does it take to recharge the pack fully? A full recharge takes approximately 10 h, allowing overnight replenishment between shifts. Which scales is the pack designed for? The KS‑A01 is intended for use with ECE tabletop scales and serves as an external power supply for mains‑free operation. What is the weight and handling advantage of the battery pack? At 0.45 kg, the pack is lightweight and convenient for mobile weighing tasks and frequent relocation. Who manufactures the battery pack? The unit is manufactured by KERN; for procurement and technical enquiries, Metav Werkzeuge can provide detailed advice and supply options Manufacturer: KERN — Origin: China; For product enquiries and distributor contact: Metav Werkzeuge, Emmerich am Rhein — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930