ENMX08T316R-F47 WKP35G Wendeplatten - Walter Tools

Take advantage of the combination of consistent wear resistance, optimised chip control and geometry-focused stability to raise metal removal rates and confidence in batch production; order the insert directly via Metav Werkzeuge or consult the specialists for application-specific advice.

ENMX08T316R-F47 WKP35G milling insert – Tiger·tec Gold, Walter Tools (for Steel & Cast Iron)

ENMX08T316R-F47 WKP35G is a negative‑rake, rhombic 75° indexable milling insert engineered for high‑productivity machining of steel (P) and cast iron (K).

Tiger·tec Gold coating for long tool life
Optimised chipbreaker F47 for controlled chips
Rhombic 75° geometry for stable milling
Suitable for steel and cast iron machining

Higher productivity through stable wear behaviour

The Tiger·tec Gold grade WKP35G combines a coated carbide substrate with a coating system engineered for demanding intermittent and continuous milling. The result is predictable wear resistance, which extends the interval between index changes and reduces unplanned downtime. For production environments where cycle times and repeatability matter, the insert’s composition supports consistent surface finish and tool life — an economic advantage for long runs. The series’ design focuses on efficient heat management and abrasion resistance, so maintenance effort is lower and planning becomes more reliable.

Reliable chip control for safer, faster machining

Equipped with an F47 chipbreaker, the geometry channels swarf into short, manageable fragments suitable for both steel and cast iron operations. The chipbreaker is optimised to reduce chip entanglement and improve evacuation at elevated cutting speeds; this translates into steadier process forces and reduced risk of tool or workpiece damage. Explaining briefly: a chipbreaker shapes how the material fractures and folds away — here giving controlled chips that support higher feed rates with less interruption to the machining cycle.

Geometry engineered for rigidity and accessibility

The rhombic 75° form provides a stable cutting orientation that balances strength and accessibility in shoulder and face milling. The 0° (negative) relief angle enhances cutting edge robustness for heavy cuts, while the 1.6 mm corner radius contributes to load distribution and improved edge life. The overall plate size 08 and T3 thickness suit a broad range of milling bodies and cutter heads, enabling secure clamping and repeatable positioning. In practice, this geometry reduces vibration and improves dimensional stability when removing larger material volumes.

Material versatility and application focus

Designed specifically for ISO groups P and K, the grade supports unalloyed and alloyed steels as well as various cast irons. The substrate and coating pairing address both the thermal demands of steel machining and the abrasive nature of many cast materials. For shops that machine mixed material batches, the insert offers a single‑grade solution to simplify tooling logistics while maintaining consistent results across component families.

Practical advantages for the workshop

The insert’s M tolerance class and manufacturer specifications ensure interchangeability with standard toolholders that accept the ENMX form. The negative rake and robust edge make the insert particularly suitable for operations requiring stable cutting when interrupted cuts or varied engagement occur. This reliability helps to reduce cycle variability and contributes to predictable manufacturing output.

For reliable high‑volume milling with Walter Tools Tiger·tec Gold, contact Metav Werkzeuge for tailored application support and fast supply of the ENMX08T316R-F47 WKP35G insert.

Technical details

• Article number / SKU: ENMX08T316R-F47-WKP35G-WALTER
• Designation: ENMX08T316R-F47 WKP35G
• Manufacturer: Walter Tools
• Product type: Milling insert

Core data

• Geometry: Rhombic 75°
• Size: 08
• Corner radius: 1.6 mm
• Thickness: T3
• Relief angle: 0° (negative)
• Tolerance class: M
• Chipbreaker: F47
• Grade: WKP35G
• Series / coating: Tiger·tec Gold
• Applicable material groups: P (steel), K (cast iron)

Features

• Coated cemented carbide
• Robust cutting edge for heavy cuts
• Optimised chip control for short chips
• Suitable for intermittent and continuous milling
• Execution: X

FAQ

What materials can be machined with this insert?
The ENMX08T316R-F47 WKP35G insert is specified for ISO groups P and K, making it suitable for a wide range of steels and cast irons.

Which chip shape does the F47 chipbreaker produce?
The F47 chipbreaker is engineered to produce short, controlled chips that improve evacuation and process stability in both steel and cast iron applications.

Is the insert suitable for interrupted cuts?
Yes; the negative 0° relief and robust edge geometry give the ENMX08T316R-F47 WKP35G good resistance to impact and vibration typical of interrupted milling.

How does the Tiger·tec Gold series benefit tool life?
The Tiger·tec Gold coating system enhances abrasion and heat resistance, which leads to more consistent wear behaviour and longer intervals between index changes.

Can this insert be used in standard toolholders for ENMX forms?
The plate follows common ENMX dimensions and an M tolerance class, allowing interchangeability with matching toolholders designed for this form.

The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and these manufacturers; the offered item is original and factory‑new.

Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen