30 kg/60 kg Platform Scale With Flip/Flop Indicator, Fine Display IP65 - KERN

Take advantage of high reproducibility and durable construction thanks to OIML Class F2 accuracy and a fine-turned stainless steel finish; order the single weight directly via Metav Werkzeuge or consult our specialists for application advice. KERN 337-16 — 50 kg OIML Class F2 calibration weight, knob form The KERN 337-16 is a single calibration weight designed for traceable mass checks and routine calibrations of industrial scales and balances Calibration weight OIML Class F2 Nominal mass 50 kg Fine-turned stainless steel finish Knob form for safe handling Reliable accuracy for repeatable results A primary benefit of this calibration mass is its OIML Class F2 rating, which ensures a defined maximum deviation—listed here as tolerance 800 mg. That level of precision supports consistent, repeatable adjustments of industrial weighing equipment where stable reference masses are required. The specification translates directly into fewer rechecks and a more predictable calibration routine, which is especially relevant for quality assurance workflows and processes governed by measurement standards. Durable construction and safe handling Constructed from fine-turned stainless steel, the weight resists corrosion and retains its geometry under normal workshop conditions, safeguarding long-term measurement stability. The knob form facilitates safe placement and removal from weighing platforms while reducing the risk of surface damage during handling. These physical attributes protect the calibrated value of the reference mass and reduce the need for frequent rework, contributing to lower lifetime operational disruption. Practical fit for laboratory and industrial use As a single weight with a nominal mass of 50 kg, this reference mass suits calibration tasks for larger scales and balance systems used in production, shipping or calibration laboratories. The compact profile and proven material selection support easy storage and transport when combined with appropriate protective cases. Originating from Germany, the unit meets expectations for manufacturing consistency and traceability in regulated environments. For secure, traceable calibrations and advice on suitable accessories for the KERN 337-16, contact Metav Werkzeuge for tailored guidance and availability. Technical Data Article number: 337-16 Manufacturer: KERN GTIN: 4045761006638 Origin: DE Tariff number: 84239090 Facts Nominal mass: 50 kg Tolerance (OIML F2): 800 mg OIML class: F2 Material: stainless steel (fine-turned) Form: knob form Special features Single weight Knob form for handling Fine-turned stainless steel surface SKU: 337-16 Intended for calibration and verification tasks FAQ What accuracy class does this calibration weight have? The KERN 337-16 is classified as OIML Class F2, with a stated tolerance of 800 mg, making it suitable for many industrial calibration applications. Which scales and balances can be checked with this weight? This single weight is intended for use with larger scales and balances whose capacity and calibration procedure accommodate a 50 kg reference mass. How should the weight be handled to avoid damage? The knob form allows controlled handling and positioning; lifting with the knob and storing in a protective case preserves the fine-turned stainless steel surface and the calibrated value. Is the surface resistant to corrosion? Yes, the fine-turned stainless steel construction offers good resistance to corrosion and supports stability in typical workshop and laboratory environments. Is an accessory recommended for storage or transport? For this accuracy class and mass, an appropriate protective case is recommended to prevent surface damage and maintain measurement integrity; a selection is available in the accessories section. Metav Werkzeuge, Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271

Take advantage of a secure, retrofit-ready mounting solution that keeps indicator units firmly fixed to platform scales while minimising installation time; the compact design and reliable attachment support continuous operation. Order the product directly via Metav Werkzeuge or ask our consultants if needed. EOC-A03 KERN mounting bracket for indicator units — screw-fixed retrofit solution The EOC-A03 is a screw-on mounting bracket designed to secure scale indicator units to platform scales, enabling a tidy, retrofit installation where a display needs firm support. Screw-fixed attachment for indicator units Retrofit-ready for existing platform scales Durable design for reliable long-term use Compact footprint preserves platform clearance Built for reliable, repeatable fixing of indicators The EOC-A03 mounting bracket delivers a pragmatic solution for securing an indicator unit to a weighing platform. Thanks to its screw-fixed concept, the bracket provides a stable connection that reduces vibration and movement of the display, which in turn improves readability and measurement reliability. This solid attachment method supports continuous production processes by lowering the risk of loose connections and the need for repeated adjustments, contributing to predictable uptime on the shop floor. Simple retrofit installation that saves time Designed as a retrofit component for platform scales, the bracket allows for rapid fitting without major modifications to existing equipment. The compact design keeps the indicator close to the platform while providing sufficient clearance for cabling and service access. For workshop teams and maintenance planners, this means less downtime during upgrades: the bracket can be mounted to the platform and the indicator secured with standard fixings, enabling a neat and secure arrangement that conforms to professional installation practice. Practical benefits for industrial weighing environments Beyond mechanical stability, the bracket supports a professional presentation of the weighing system and reduces the likelihood of accidental damage or misalignment of the indicator during daily use. When combined with quality indicator units and a reliable scale platform, the bracket helps maintain consistent weighing performance and user ergonomics. Metav’s approach to supplying precision accessories ensures that components like this are backed by a broad product range and experienced advice for integration into industrial workflows. For reliable retrofit mounting of KERN indicator units, contact Metav Werkzeuge for availability and technical guidance — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Data Article number: EOC-A03 Manufacturer: KERN GTIN: 4045761192478 Origin: CN SKU: EOC-A03 Tariff code: 84239010 Weight: 0.56 kg Facts GTIN: 4045761192478 Tariff code: 84239010 Weight (kg): 0.56 eCl@ss: 21029090 Special features Screw-fixed mounting for indicator units Retrofit-ready for attachment to platform scales Category: Scales accessories Part of KERN accessories range FAQ Is the bracket suitable for retrofitting existing platform scales? Yes. The bracket is designed as a retrofit-ready solution and enables the secure attachment of an indicator unit to existing platform scales. Which indicator units can be mounted with this bracket? The bracket supports the secure fixing of scale indicator units; compatibility depends on the indicator’s mounting points and the platform layout — the EOC-A03 from KERN is intended for standard indicator attachments. What is the weight of the mounting bracket? The mounting bracket weighs 0.56 kg, which makes it easy to handle during installation while providing reliable support for the display. Does the bracket require special tools for installation? Installation typically uses standard screw fixings; no special tools are specified for fitting the EOC-A03 mounting bracket. Where is the product manufactured? The product origin is listed as CN (China). Manufacturer: KERN — Origin: CN — Contact via dealer Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930

A compact table base with an integrated wall holder enables flexible table or wall mounting for the weighing indicator and keeps the workspace tidy. Benefit from the lightweight 0.25 kg design and dependable KERN quality; order the accessory directly via Metav Werkzeuge or consult our specialists if required. Table base EOC-A04 – Table base with wall holder for EOC-A04 (KERN) A Table base EOC-A04 designed for secure table or wall mounting of the EOC‑A04 weighing indicator, ideal for compact workshop and production environments. Includes wall holder for EOC-A04 mounting Compact table base with integrated wall bracket Lightweight: 0.25 kg for easy handling Save bench space with flexible mounting The combination of a stable table base and an included wall holder allows the weighing indicator to be positioned where it best supports the workflow, whether temporarily on a bench or permanently on a wall. This flexibility reduces clutter, simplifies access to the display and contributes to faster weighing cycles. The design suits tight workstations and helps maintain a clear, organised production area, improving throughput and operator efficiency. Quick installation for uninterrupted operation Fitted specifically for the weighing indicator, the included bracket enables straightforward mounting and reassignment between table and wall positions. Minimising installation time supports continuous operation and reduces setup-related downtime. The accessory’s compact format and low mass make handling and reinstallation swift, supporting rapid changeovers in busy environments without needing additional fixtures. Built for workshop compatibility and trusted sourcing Delivered by KERN and categorised for scale accessories, the product is meant to integrate seamlessly with common weighing setups. The low weight, 0.25 kg, makes it practical for frequent repositioning while the included wall bracket ensures consistent alignment of the indicator. As a supplier, Metav combines decades of experience with a broad product range, offering a reliable quality filter from Emmerich to European workshops and trade customers. Contact Metav Werkzeuge in Emmerich for ordering or technical clarification — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Article number: EOC-A04 SKU: EOC-A04 GTIN: 4045761192485 Manufacturer: KERN Origin: CN Tariff number: 84239010 Facts Weight: 0.25 kg eClass: 21160592 Special features Includes wall holder for mounting the EOC-A04 indicator Product category: Scales — Accessories Product group: Mounting bracket FAQ Is the bracket compatible with the EOC-A04 indicator? The included wall holder is designed specifically for the EOC‑A04 indicator and supports both table and wall installation. How much does the accessory weigh? The table base with wall holder has a weight of 0.25 kg. Who manufactures this accessory? The accessory is produced by KERN and supplied under the designation EOC‑A04. Can the base be moved between workstations easily? Yes, the compact and lightweight design allows simple repositioning between benches or walls as needed. KERN — Origin: China — Contact: not provided

Benefit from a compact elevation solution that combines stainless steel durability with a precise height of approximately 330 mm to improve display ergonomics and measurement reliability; order or request advice via Metav Werkzeug e — the precision partner for workshop and industry. KERN EOC-A05 Stand — stainless steel, approx. 330 mm height The KERN EOC-A05 is a stainless steel stand designed to raise indicator and display units for scales and measuring instruments, providing stable elevation and simple retrofit options. Stainless steel construction Approx. 330 mm height for improved ergonomics Elevates indicator/display units for clearer reading Retrofit-capable accessory for scales Stable elevation for clearer readings and fewer errors A raised display improves operator ergonomics and reduces the need to bend or strain during measurement tasks, which in turn helps maintain consistent readings over long shifts. The compact support is made from stainless steel, offering a rigid platform that resists flexing under normal use. Thanks to the 330 mm height, displays are positioned within an optimal viewing range for bench or tabletop setups, enabling faster visual checks and reducing handling time. The low overall mass and compact footprint support tidy bench organisation without compromising the mechanical stability required for precision weighing and measurement applications. Durable construction that suits workshop life and retrofit projects Built from corrosion-resistant stainless steel, this elevation stand is intended for sustained workshop use where robustness matters. The metal finish minimises maintenance and tolerates routine cleaning, while the retrofit-friendly design allows easy integration with existing indicator units and scale housings. As an accessory in the scales segment, the support simplifies upgrades: measurement systems can be adapted to more ergonomic layouts without replacing core equipment. The result is a small investment that extends the usable configuration options of existing metrology assets while keeping downtime to a minimum. Compact logistics and seamless integration into supply chains Weighing approximately 1.17 kg, the support combines light handling with sufficient mass for a stable base, making stocking and handling straightforward for stores and workshops. Supplied as a scale accessory, the component aligns with standard workshop inventory practices and is easy to store or ship. The stainless construction and simple geometry also reduce packaging complexity and potential transit damage. For procurement teams, the clear specification—material, height and manufacturer—facilitates rapid decision-making and ensures consistent replacement or deployment across multiple workstations. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN EOC-A05 stand into existing setups or for ordering details via info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: EOC-A05 Manufacturer: KERN SKU: EOC-A05 GTIN: 4045761192492 Origin: CN Material: Stainless steel Weight: 1.17 kg Tariff code: 73269098 Numbers / core technical data Height: approx. 330 mm Weight: 1.17 kg GTIN: 4045761192492 Tariff number: 73269098 Special features Elevates indicator/display unit Retrofit-capable Accessory for scales and measuring equipment Segment: Accessories FAQ Is the stand suitable for use with scale indicator units? The stand is intended as an accessory for scales and is designed to elevate indicator and display units; the KERN EOC-A05 provides a stable support for such devices. What material is the support made from? The KERN EOC-A05 is manufactured from stainless steel, offering corrosion resistance and workshop durability. What is the overall height of the stand? The support has an approximate height of 330 mm, designed to position displays at a convenient viewing level. How heavy is the stand for handling and storage considerations? The stand weighs approximately 1.17 kg, balancing ease of handling with sufficient mass for stable placement. Can the stand be retrofitted to existing equipment? The design of the KERN EOC-A05 allows retrofit installation as a display-elevating accessory where mechanical compatibility exists. Metav Werkzeuge, Emmerich am Rhein, Germany | info@metav-werkzeuge.com | +49 2822 7131930

Take advantage of the combination of straightforward protection, universal compatibility with KERN scale series, and a compact five-piece supply for uninterrupted weighing operations. Secure procurement via Metav Werkzeuge or contact our consultants for tailored advice. KERN EOC-A01S05 protective cover — 5-piece set, compatible with EOC/IOC/BID/UID scales The KERN EOC-A01S05 protective cover is a lightweight accessory designed to shield precision scales from dust and light splashes in industrial and laboratory environments. 5-piece protective cover set Compatible with EOC, IOC, BID and UID scales Lightweight for easy handling and storage Protects against dust and minor splashes Keep measurements reliable by preventing contamination A simple barrier such as a protective cover reduces the risk of particulate ingress and accidental spill contact that can compromise sensitive weighing components. By limiting sources of contamination, the accessory supports longer intervals between maintenance and calibration, which translates into fewer interruptions on the production floor. The result is a measurable improvement in operational uptime and consistency for precision weighing tasks. Fit and handling tailored to busy workstations Designed specifically for the KERN series of weighing instruments, the cover offers direct compatibility with EOC, IOC, BID and UID platforms. The set format provides spares for multiple stations or for immediate replacement after cleaning, while the lightweight construction ensures simple removal and refitting during daily use. Compatibility reduces sourcing complexity and helps maintain workflow efficiency across several weighing points. Practical procurement and workshop-ready convenience Supplied as a compact five-piece set, the accessory meets the needs of workshops and laboratories that prioritise continuity and readiness. Delivery from Metav’s Emmerich hub benefits from experienced logistics and a quality filter for the European market, ensuring dependable supply. For buyers seeking a straightforward protective solution, this accessory integrates into existing processes without requiring alterations to equipment or workflow. For procurement or technical advice from Metav Werkzeuge — request the KERN EOC-A01S05 protective cover set directly via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: EOC-A01S05 Manufacturer: KERN GTIN: 4045761197206 Country of origin: CN Tariff number: 39269097 Facts Weight: 0.01 kg Contents: 5 pieces Special features Compatible with EOC, IOC, BID and UID scales Category: Scales › Accessories SKU: EOC-A01S05 FAQ Is the cover suitable for all EOC models? The KERN EOC-A01S05 protective cover is specified for compatibility with EOC, IOC, BID and UID series scales and fits the intended models in those ranges. What is included in the delivery? Delivery comprises a set of five protective covers as stated in the product data and packaging information. Will the cover affect weighing accuracy during measurement? The cover is intended for protection when the scale is not actively weighing; removing the cover during measurement prevents any influence on weighing results. How lightweight is the accessory for handling and storage? Each set has an overall weight of approximately 0.01 kg, enabling effortless handling and compact storage between uses. Manufacturer: KERN — Address: not specified — Contact: not specified

Take advantage of a stable, lightweight floor stand that elevates the indicator to an ergonomic 1000 mm working height while remaining retrofittable for existing systems; order the KERN EOB-A02B directly via Metav Werkzeuge or consult our advisers for application-specific guidance. KERN EOB-A02B floor stand — 1000 mm height, retrofittable The KERN EOB-A02B is a floor stand designed to raise the weighing indicator to an ergonomic working height, ideal as an accessory for laboratory and workshop scales. Raises indicator to approx. 1000 mm height Retrofit-ready for existing indicator units Lightweight for quick installation — 2.65 kg Designed as accessory for weighing systems Raise indicator visibility and reduce handling errors A dedicated floor stand that positions the indicator at 1000 mm delivers tangible workflow benefits: improved line of sight, fewer posture-related interruptions and quicker data entry. Fitting the indicator at an elevated level reduces the need to bend or lift displays during repetitive weighing tasks, which supports faster cycles and fewer accidental knocks. The stand is presented as a practical ergonomic improvement for production benches and quality-control stations. Fast integration with existing weighing equipment Designed to be retrofittable, the stand enables the retro‑installation of an indicator without replacing the base scale, cutting downtime and spare-part complexity. With a lightweight assembly of 2.65 kg, handling and mounting are straightforward, which shortens installation times and keeps disruption to a minimum. This practical compatibility helps preserve existing investments in weighing electronics while upgrading usability at the bench. Practical design for workshop and industrial use As an accessory from KERN, the unit focuses on a compact footprint and reliable positioning for everyday operation in busy environments. The simple upright configuration secures the indicator at working height, improving ergonomics and operational clarity for operators. The accessory nature of the product makes it suitable wherever indicator visibility and repeatable measurement workflows are priorities, from workshops to inspection areas. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN EOB-A02B into your weighing setup — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number / SKU: EOB-A02B Manufacturer: KERN GTIN: 4045761192171 Origin country: CN Core specifications Height: approx. 1000 mm Weight: 2.65 kg Tariff number: 73269098 ECLASS: 21170601 Special features Retrofit-capable (nachrüstbar) Accessory for weighing indicator units Product category: Accessories for scales Product group: Stands / tripods FAQ Is the stand compatible with different indicator models? The KERN EOB-A02B is designed as an accessory for weighing systems and can be retrofitted to many indicator units; compatibility depends on the indicator's mounting interface and bracket dimensions. What is the total height of the stand? The floor stand offers an overall working height of approximately 1000 mm to position the indicator at an ergonomic level. How heavy is the KERN EOB-A02B and is it easy to install? The stand weighs 2.65 kg and is intentionally lightweight to enable quick mounting and repositioning with minimal effort. Can the stand be retrofitted to existing equipment? Yes — the EOB-A02B is retrofittable (nachrüstbar) so it can be added to existing setups without replacing the base scale. Where is the product manufactured? The KERN EOB-A02B is listed with origin country CN. KERN — distributed via Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Take advantage of a reliable RS-232 connection and a practical ~1.5 m cable length to ensure precise, uninterrupted data transfer between weighing instruments and PC systems; order the cable directly via Metav Werkzeuge or consult our specialists for compatibility advice. EOC-A12 Interface Cable — RS-232 connection, approx. 1.5 m (KERN) EOC-A12 Interface Cable is a dedicated RS-232 lead for integrating weighing equipment with data acquisition systems and control terminals in workshop and laboratory settings. RS-232 interface compatible Approx. 1.5 m cable length Suitable for weighing equipment Manufacturer: KERN Reliable connectivity for measurement workflows The RS-232 standard provides a stable, proven method for sending numerical measurement results from instruments to computers and printers; this connection reduces the risk of data loss during transfer and supports established serial communication protocols. Designed by KERN, the cable ensures reliable data transfer for metrology and industrial weighing applications, which helps maintain traceable records and simplifies quality control procedures. By choosing a serial interface lead, latency and compatibility issues common with improvised adapters are avoided. Simple setup that fits existing installations A cable of approx. 1.5 m balances freedom of movement and tidy installation, allowing scales and terminal units to be positioned conveniently without extra extensions. The lead is engineered for plug-and-play integration with standard serial ports used on many weighing instruments, reducing setup time and limiting the need for specialist configuration. For facilities replacing older leads, the modest length helps avoid signal degradation while enabling organised cable routing within cabinets or across workbenches. Durable design and wide equipment compatibility Constructed for routine workshop use, the connection cable combines a compact form with handling resilience appropriate for industrial environments. Its mass and construction provide stable handling during regular connection cycles and maintenance. Compatibility with weighing accessories and related scale interfaces makes this lead a practical spare part for service departments and production lines that rely on consistent measurement transfer. For procurement or technical confirmation of compatibility with specific weighing models, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 to secure the KERN RS-232 EOC-A12 cable with immediate dispatch advice Technical data SKU: EOC-A12 Manufacturer: KERN GTIN: 4045761198463 Origin: CN Commodity code: 84239010 Core specifications Weight: 0.38 kg Cable length: approx. 1.5 m eClass: 19050112 Features Interface: RS-232 Application: accessories for scales / weighing equipment Segment: Accessories, product category: Scales, product group: Cable FAQ What interface standard does the cable use? The EOC-A12 interface cable uses the RS-232 serial standard for direct instrument-to-PC communication, supplied by KERN. Is the cable suitable for industrial weighing systems? Yes, the KERN EOC-A12 connection cable is specified for use with scales and weighing equipment and is commonly employed in industrial metrology environments. What is the length of the connection lead? The connection lead measures approximately 1.5 m, providing practical reach for most bench and floor-mounted setups. Can the cable be used with older serial ports? The EOC-A12 is compatible with standard RS-232 serial ports, making it suitable for legacy interfaces often found on older instruments. How heavy is the cable and is it robust enough for workshop use? The cable has a listed weight of 0.38 kg and is designed for routine workshop handling and reliable reconnection cycles. KERN — Origin: CN — GTIN: 4045761198463

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271