15 kg Platform Parcel Scale Large Steel Platform 5 g Readability 25 mm LCD, 100 h Battery, IP67? - KERN

Take advantage of a compact, 480 mm elevation that improves indicator readability and shortens handling time; the lightweight construction at 1.23 kg keeps installation and repositioning simple. Combine these practical features with the trusted KERN quality and arrange supply directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN Stativ EOB-A01N – Indicator stand with approx. 480 mm elevation The KERN Stativ EOB-A01N is a compact stand designed to raise scale indicator units for clearer viewing and smoother bench workflows in industrial and workshop settings Elevates scale indicator by approx. 480 mm Compatible with weighing plates 315×305×57 mm Lightweight at 1.23 kg for easy handling Better readability and fewer handling errors Raising the indicator improves visibility and ergonomics, which in turn supports faster, more reliable readings during repetitive weighing tasks. The 480 mm elevation positions the display at a more comfortable height for operators working at benches or machines, reducing the need to bend or stretch. This ergonomic advantage contributes directly to workflow efficiency by lowering the time spent adjusting viewing angles and helps maintain consistent measuring procedures. Compact design that integrates into workshop routines The compact footprint and lightweight nature of the support make it straightforward to incorporate into existing setups without extensive reorganisation. At 1.23 kg, the unit is portable enough for reallocation between workstations yet designed to remain in place during standard operation. The modest dimensions suit confined bench areas and permit flexible positioning of the indicator, enabling a neat and practical workstation that supports uninterrupted production. Clear compatibility and simple integration with weighing systems Engineered as an accessory for scale indicators, the stand is specified for models with a weighing plate size of 315×305×57 mm, ensuring a direct fit where such plates are used. The straightforward purpose of the stand—raising the evaluating/display unit—means installation requires minimal adjustment, helping to avoid downtime. Supplied by a specialist distributor, the item benefits from a quality-controlled logistics chain that supports dependable delivery and product traceability. Practical benefits for procurement and workshop managers Selecting a dedicated indicator stand reduces ad-hoc supports and improvised solutions that can compromise repeatability. The engineered solution gives procurement confidence through clear technical matching, while workshop managers gain an easily implemented device that standardises the presentation of measurement results. The compact accessory supports consistent operational layouts and contributes to an organised bench environment. For supply and expert advice on integrating the KERN stand into existing weighing systems, contact Metav Werkzeuge for precise delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Article number: EOB-A01N SKU: EOB-A01N Manufacturer: KERN GTIN: 4045761192164 Country of origin: CN Tariff number: 73269098 Core data Weight: 1.23 kg Height: approx. 480 mm Compatible plate size: 315×305×57 mm Special features Accessory for scale indicators Purpose: raises the evaluating/display unit Compact, lightweight construction FAQ Which weighing systems is the stand compatible with? The stand is intended for use with indicators that sit above weighing plates sized 315×305×57 mm; the KERN Stativ EOB-A01N is specified to match such configurations. How much does the stand weigh and is it portable? The support weighs 1.23 kg, making it easy to reposition between workstations while remaining stable in normal use. Is the stand suitable for laboratory and workshop environments? Yes — the stand was designed to raise indicator units for clearer viewing in bench and workshop settings, aiding ergonomic handling and routine measurement tasks. Where does the product come from and who supplies it? The product is manufactured under the KERN brand and shipped from the supplier network; Metav Werkzeuge handles distribution and can provide logistics details. KERN — Country of origin: CN — GTIN: 4045761192164

Take advantage of a stable, lightweight floor stand that elevates the indicator to an ergonomic 1000 mm working height while remaining retrofittable for existing systems; order the KERN EOB-A02B directly via Metav Werkzeuge or consult our advisers for application-specific guidance. KERN EOB-A02B floor stand — 1000 mm height, retrofittable The KERN EOB-A02B is a floor stand designed to raise the weighing indicator to an ergonomic working height, ideal as an accessory for laboratory and workshop scales. Raises indicator to approx. 1000 mm height Retrofit-ready for existing indicator units Lightweight for quick installation — 2.65 kg Designed as accessory for weighing systems Raise indicator visibility and reduce handling errors A dedicated floor stand that positions the indicator at 1000 mm delivers tangible workflow benefits: improved line of sight, fewer posture-related interruptions and quicker data entry. Fitting the indicator at an elevated level reduces the need to bend or lift displays during repetitive weighing tasks, which supports faster cycles and fewer accidental knocks. The stand is presented as a practical ergonomic improvement for production benches and quality-control stations. Fast integration with existing weighing equipment Designed to be retrofittable, the stand enables the retro‑installation of an indicator without replacing the base scale, cutting downtime and spare-part complexity. With a lightweight assembly of 2.65 kg, handling and mounting are straightforward, which shortens installation times and keeps disruption to a minimum. This practical compatibility helps preserve existing investments in weighing electronics while upgrading usability at the bench. Practical design for workshop and industrial use As an accessory from KERN, the unit focuses on a compact footprint and reliable positioning for everyday operation in busy environments. The simple upright configuration secures the indicator at working height, improving ergonomics and operational clarity for operators. The accessory nature of the product makes it suitable wherever indicator visibility and repeatable measurement workflows are priorities, from workshops to inspection areas. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN EOB-A02B into your weighing setup — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number / SKU: EOB-A02B Manufacturer: KERN GTIN: 4045761192171 Origin country: CN Core specifications Height: approx. 1000 mm Weight: 2.65 kg Tariff number: 73269098 ECLASS: 21170601 Special features Retrofit-capable (nachrüstbar) Accessory for weighing indicator units Product category: Accessories for scales Product group: Stands / tripods FAQ Is the stand compatible with different indicator models? The KERN EOB-A02B is designed as an accessory for weighing systems and can be retrofitted to many indicator units; compatibility depends on the indicator's mounting interface and bracket dimensions. What is the total height of the stand? The floor stand offers an overall working height of approximately 1000 mm to position the indicator at an ergonomic level. How heavy is the KERN EOB-A02B and is it easy to install? The stand weighs 2.65 kg and is intentionally lightweight to enable quick mounting and repositioning with minimal effort. Can the stand be retrofitted to existing equipment? Yes — the EOB-A02B is retrofittable (nachrüstbar) so it can be added to existing setups without replacing the base scale. Where is the product manufactured? The KERN EOB-A02B is listed with origin country CN. KERN — distributed via Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Take advantage of the combination of OIML class M2 accuracy, a 5 kg nominal value and a robust coated cast-iron block design for reliable, routine calibration in production and quality control. Order the ECO block weight (Class M2) directly via Metav Werkzeuge or ask our consultants if needed. ECO block weight (Class M2) — 5 kg calibration weight, coated cast iron, KERN The ECO block weight (Class M2) is a compact, coated cast-iron reference mass designed for routine verification and calibration of industrial scales and balances in workshops and testing labs. OIML class M2 certified reference mass 5 kg nominal value for routine calibration Coated cast-iron construction for durability Compact block design for stable placement Accurate reference mass for routine verification The ECO block weight is supplied as an OIML class M2 reference mass, offering a 5 kg nominal value with an OIML tolerance of 800 mg. This classification indicates suitability for routine verifications and internal calibrations where mid-grade metrological performance is required. Using a calibrated reference mass with known tolerance reduces measurement uncertainty in daily checks and supports repeatable results. The KERN designation and standardised identifiers ensure reproducibility within quality assurance processes and simplify documentation for inspection records. Durable construction for workshop use Manufactured from coated cast iron, the block design combines mechanical stability with surface protection, reducing wear and susceptibility to corrosion in typical workshop environments. The compact Block Eco design permits secure placement on a weighing pan and minimises tipping or dust accumulation, which helps preserve long-term accuracy. A coated finish decreases maintenance needs and extends service life, so calibration intervals remain predictable and downtime for replacement is reduced. Traceability and easy integration into workflows Clear identifiers and classifications support inventory and compliance management: the unit is supplied with a unique GTIN and SKU for unambiguous traceability, and origin data is recorded for customs and documentation. The reference mass is intended for use in production lines, incoming goods inspection and routine lab checks where documented evidence of calibration steps is required. Labelling and standardised specifications make the mass straightforward to register in quality systems and link to calibration certificates where applicable. For robust, traceable calibration masses from KERN, contact Metav Werkzeuge in Emmerich for tailored advice and rapid dispatch — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 356 Manufacturer: KERN SKU: 356-76 GTIN: 4045761241756 Facts Nominal value: 5 kg OIML tolerance: 800 mg OIML class: M2 Tariff code: 84239090 ECLASS: 32120103 Special features Material: Coated cast iron Design: Block Eco Category: Calibration weight (Prüfgewichte) Origin: CN FAQ What applications is this reference mass suitable for? The KERN ECO block weight (Class M2) is suitable for routine verification, internal calibrations and quality checks of industrial scales and balances where mid-level metrological requirements apply. How precise is the 5 kg calibration mass? The mass conforms to OIML class M2 with an OIML tolerance of 800 mg, which defines its admissible deviation for routine calibration tasks. What material and design features improve durability? A coated cast-iron construction and compact block form provide mechanical robustness and surface protection, reducing wear in workshop environments and supporting stable placement on weighing pans. Is the product traceable for quality management systems? Yes, the unit is supplied with a GTIN and SKU, enabling clear inventory tracking and straightforward linkage to calibration records within quality management workflows. Can this weight be used in production and laboratory environments? The ECO block weight is intended for use in production lines, inspection stations and test labs for routine checks and internal calibrations where OIML M2 specification is appropriate. Metav Werkzeuge — Emmerich am Rhein, Germany — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271

A compact table base with an integrated wall holder enables flexible table or wall mounting for the weighing indicator and keeps the workspace tidy. Benefit from the lightweight 0.25 kg design and dependable KERN quality; order the accessory directly via Metav Werkzeuge or consult our specialists if required. Table base EOC-A04 – Table base with wall holder for EOC-A04 (KERN) A Table base EOC-A04 designed for secure table or wall mounting of the EOC‑A04 weighing indicator, ideal for compact workshop and production environments. Includes wall holder for EOC-A04 mounting Compact table base with integrated wall bracket Lightweight: 0.25 kg for easy handling Save bench space with flexible mounting The combination of a stable table base and an included wall holder allows the weighing indicator to be positioned where it best supports the workflow, whether temporarily on a bench or permanently on a wall. This flexibility reduces clutter, simplifies access to the display and contributes to faster weighing cycles. The design suits tight workstations and helps maintain a clear, organised production area, improving throughput and operator efficiency. Quick installation for uninterrupted operation Fitted specifically for the weighing indicator, the included bracket enables straightforward mounting and reassignment between table and wall positions. Minimising installation time supports continuous operation and reduces setup-related downtime. The accessory’s compact format and low mass make handling and reinstallation swift, supporting rapid changeovers in busy environments without needing additional fixtures. Built for workshop compatibility and trusted sourcing Delivered by KERN and categorised for scale accessories, the product is meant to integrate seamlessly with common weighing setups. The low weight, 0.25 kg, makes it practical for frequent repositioning while the included wall bracket ensures consistent alignment of the indicator. As a supplier, Metav combines decades of experience with a broad product range, offering a reliable quality filter from Emmerich to European workshops and trade customers. Contact Metav Werkzeuge in Emmerich for ordering or technical clarification — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Article number: EOC-A04 SKU: EOC-A04 GTIN: 4045761192485 Manufacturer: KERN Origin: CN Tariff number: 84239010 Facts Weight: 0.25 kg eClass: 21160592 Special features Includes wall holder for mounting the EOC-A04 indicator Product category: Scales — Accessories Product group: Mounting bracket FAQ Is the bracket compatible with the EOC-A04 indicator? The included wall holder is designed specifically for the EOC‑A04 indicator and supports both table and wall installation. How much does the accessory weigh? The table base with wall holder has a weight of 0.25 kg. Who manufactures this accessory? The accessory is produced by KERN and supplied under the designation EOC‑A04. Can the base be moved between workstations easily? Yes, the compact and lightweight design allows simple repositioning between benches or walls as needed. KERN — Origin: China — Contact: not provided

Benefit from a combination of universal 100–240 V mains input, a regulated 9 V DC / 100 mA output and included multi‑region plug adapters for consistent power to scales and small instruments; Order the Universal external power adapter (YKA-16) directly via Metav Werkzeuge or ask our consultants if needed. YKA-16 — Universal external power adapter (9 V, 100 mA) by KERN The YKA-16 is an external universal power adapter for scales and related accessories, designed for reliable operation across international mains. Universal 100–240 V mains input Stable 9 V DC output at 100 mA Incl. EU, GB and US plug adapters Compact design, approx. 0.13 kg weight Continuous, regulated power for precise measurement The adapter supplies a regulated 9 V DC output at 100 mA, ensuring connected instruments receive a constant voltage even if the mains fluctuate. A regulated supply reduces drift and measurement error in sensitive weighing equipment, which translates into fewer recalibrations and more consistent results. The combination of a wide input range and regulated output supports uninterrupted operation of small scales and peripherals commonly used in workshops and laboratories. Ready for international use and flexible deployment Equipped with EU, GB and US plug adapters, the unit is prepared for deployment in multi‑location environments without additional accessories. The 100–240 V mains input accommodates different supply standards, which simplifies logistics for companies that move instruments between sites or serve international customers. This compatibility shortens setup time and reduces the need for separate adapters for each region. Space‑saving, serviceable design for workshop routines With a compact form factor and a listed weight of 0.13 kg, the adapter occupies minimal space in toolboxes and on service trolleys. The external design enables easy replacement should a spare be required, supporting fast maintenance cycles and reducing downtime. Supplied as a standalone adapter for scales and accessories, it integrates well into existing equipment fleets without altering instrument housings or installation points. For dependable international power solutions for KERN scales and accessories, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and place an order through our secure procurement channel. Technical data SKU: YKA-16 Manufacturer: KERN Country of origin: CN Tariff code: 85044090 Core specifications Input voltage range: 100–240 V Output voltage: 9 V DC Output current: 100 mA Weight: 0.13 kg eCl@ss: 21059206 Features and compatibility Product category: Scales > Accessories Product type: External universal power adapter Included plug adapters: EU, GB, USA Suitable for: Small weighing instruments and accessories FAQ Which mains voltages does the adapter support? The YKA-16 supports an input range of 100–240 V, allowing operation on most international mains supplies without a voltage converter. Are plug adapters included and which regions are covered? Yes, the unit is supplied with plug adapters for EU, GB and USA, enabling direct connection in those regions. Is the YKA-16 suitable for professional scales? The adapter is intended as an external power supply for scales and related accessories; its regulated 9 V DC / 100 mA output is suitable for many small weighing instruments and peripherals. What is the weight and portability of the adapter? The adapter weighs approximately 0.13 kg, offering a compact and lightweight option for mobile service kits and crowded workbenches. Manufacturer: KERN — Country of origin: CN