60kg Platform Scale 0.02kg Readability 550×550mm Steel Platform LCD Display Battery Operation Hold Function - KERN

Take advantage of a stable, lightweight floor stand that elevates the indicator to an ergonomic 1000 mm working height while remaining retrofittable for existing systems; order the KERN EOB-A02B directly via Metav Werkzeuge or consult our advisers for application-specific guidance. KERN EOB-A02B floor stand — 1000 mm height, retrofittable The KERN EOB-A02B is a floor stand designed to raise the weighing indicator to an ergonomic working height, ideal as an accessory for laboratory and workshop scales. Raises indicator to approx. 1000 mm height Retrofit-ready for existing indicator units Lightweight for quick installation — 2.65 kg Designed as accessory for weighing systems Raise indicator visibility and reduce handling errors A dedicated floor stand that positions the indicator at 1000 mm delivers tangible workflow benefits: improved line of sight, fewer posture-related interruptions and quicker data entry. Fitting the indicator at an elevated level reduces the need to bend or lift displays during repetitive weighing tasks, which supports faster cycles and fewer accidental knocks. The stand is presented as a practical ergonomic improvement for production benches and quality-control stations. Fast integration with existing weighing equipment Designed to be retrofittable, the stand enables the retro‑installation of an indicator without replacing the base scale, cutting downtime and spare-part complexity. With a lightweight assembly of 2.65 kg, handling and mounting are straightforward, which shortens installation times and keeps disruption to a minimum. This practical compatibility helps preserve existing investments in weighing electronics while upgrading usability at the bench. Practical design for workshop and industrial use As an accessory from KERN, the unit focuses on a compact footprint and reliable positioning for everyday operation in busy environments. The simple upright configuration secures the indicator at working height, improving ergonomics and operational clarity for operators. The accessory nature of the product makes it suitable wherever indicator visibility and repeatable measurement workflows are priorities, from workshops to inspection areas. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN EOB-A02B into your weighing setup — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number / SKU: EOB-A02B Manufacturer: KERN GTIN: 4045761192171 Origin country: CN Core specifications Height: approx. 1000 mm Weight: 2.65 kg Tariff number: 73269098 ECLASS: 21170601 Special features Retrofit-capable (nachrüstbar) Accessory for weighing indicator units Product category: Accessories for scales Product group: Stands / tripods FAQ Is the stand compatible with different indicator models? The KERN EOB-A02B is designed as an accessory for weighing systems and can be retrofitted to many indicator units; compatibility depends on the indicator's mounting interface and bracket dimensions. What is the total height of the stand? The floor stand offers an overall working height of approximately 1000 mm to position the indicator at an ergonomic level. How heavy is the KERN EOB-A02B and is it easy to install? The stand weighs 2.65 kg and is intentionally lightweight to enable quick mounting and repositioning with minimal effort. Can the stand be retrofitted to existing equipment? Yes — the EOB-A02B is retrofittable (nachrüstbar) so it can be added to existing setups without replacing the base scale. Where is the product manufactured? The KERN EOB-A02B is listed with origin country CN. KERN — distributed via Metav Werkzeuge, Emmerich am Rhein · Contact: info@metav-werkzeuge.com · Phone: +49 2822 7131930

A compact table base with an integrated wall holder enables flexible table or wall mounting for the weighing indicator and keeps the workspace tidy. Benefit from the lightweight 0.25 kg design and dependable KERN quality; order the accessory directly via Metav Werkzeuge or consult our specialists if required. Table base EOC-A04 – Table base with wall holder for EOC-A04 (KERN) A Table base EOC-A04 designed for secure table or wall mounting of the EOC‑A04 weighing indicator, ideal for compact workshop and production environments. Includes wall holder for EOC-A04 mounting Compact table base with integrated wall bracket Lightweight: 0.25 kg for easy handling Save bench space with flexible mounting The combination of a stable table base and an included wall holder allows the weighing indicator to be positioned where it best supports the workflow, whether temporarily on a bench or permanently on a wall. This flexibility reduces clutter, simplifies access to the display and contributes to faster weighing cycles. The design suits tight workstations and helps maintain a clear, organised production area, improving throughput and operator efficiency. Quick installation for uninterrupted operation Fitted specifically for the weighing indicator, the included bracket enables straightforward mounting and reassignment between table and wall positions. Minimising installation time supports continuous operation and reduces setup-related downtime. The accessory’s compact format and low mass make handling and reinstallation swift, supporting rapid changeovers in busy environments without needing additional fixtures. Built for workshop compatibility and trusted sourcing Delivered by KERN and categorised for scale accessories, the product is meant to integrate seamlessly with common weighing setups. The low weight, 0.25 kg, makes it practical for frequent repositioning while the included wall bracket ensures consistent alignment of the indicator. As a supplier, Metav combines decades of experience with a broad product range, offering a reliable quality filter from Emmerich to European workshops and trade customers. Contact Metav Werkzeuge in Emmerich for ordering or technical clarification — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Article number: EOC-A04 SKU: EOC-A04 GTIN: 4045761192485 Manufacturer: KERN Origin: CN Tariff number: 84239010 Facts Weight: 0.25 kg eClass: 21160592 Special features Includes wall holder for mounting the EOC-A04 indicator Product category: Scales — Accessories Product group: Mounting bracket FAQ Is the bracket compatible with the EOC-A04 indicator? The included wall holder is designed specifically for the EOC‑A04 indicator and supports both table and wall installation. How much does the accessory weigh? The table base with wall holder has a weight of 0.25 kg. Who manufactures this accessory? The accessory is produced by KERN and supplied under the designation EOC‑A04. Can the base be moved between workstations easily? Yes, the compact and lightweight design allows simple repositioning between benches or walls as needed. KERN — Origin: China — Contact: not provided

Benefit from a combination of universal 100–240 V mains input, a regulated 9 V DC / 100 mA output and included multi‑region plug adapters for consistent power to scales and small instruments; Order the Universal external power adapter (YKA-16) directly via Metav Werkzeuge or ask our consultants if needed. YKA-16 — Universal external power adapter (9 V, 100 mA) by KERN The YKA-16 is an external universal power adapter for scales and related accessories, designed for reliable operation across international mains. Universal 100–240 V mains input Stable 9 V DC output at 100 mA Incl. EU, GB and US plug adapters Compact design, approx. 0.13 kg weight Continuous, regulated power for precise measurement The adapter supplies a regulated 9 V DC output at 100 mA, ensuring connected instruments receive a constant voltage even if the mains fluctuate. A regulated supply reduces drift and measurement error in sensitive weighing equipment, which translates into fewer recalibrations and more consistent results. The combination of a wide input range and regulated output supports uninterrupted operation of small scales and peripherals commonly used in workshops and laboratories. Ready for international use and flexible deployment Equipped with EU, GB and US plug adapters, the unit is prepared for deployment in multi‑location environments without additional accessories. The 100–240 V mains input accommodates different supply standards, which simplifies logistics for companies that move instruments between sites or serve international customers. This compatibility shortens setup time and reduces the need for separate adapters for each region. Space‑saving, serviceable design for workshop routines With a compact form factor and a listed weight of 0.13 kg, the adapter occupies minimal space in toolboxes and on service trolleys. The external design enables easy replacement should a spare be required, supporting fast maintenance cycles and reducing downtime. Supplied as a standalone adapter for scales and accessories, it integrates well into existing equipment fleets without altering instrument housings or installation points. For dependable international power solutions for KERN scales and accessories, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and place an order through our secure procurement channel. Technical data SKU: YKA-16 Manufacturer: KERN Country of origin: CN Tariff code: 85044090 Core specifications Input voltage range: 100–240 V Output voltage: 9 V DC Output current: 100 mA Weight: 0.13 kg eCl@ss: 21059206 Features and compatibility Product category: Scales > Accessories Product type: External universal power adapter Included plug adapters: EU, GB, USA Suitable for: Small weighing instruments and accessories FAQ Which mains voltages does the adapter support? The YKA-16 supports an input range of 100–240 V, allowing operation on most international mains supplies without a voltage converter. Are plug adapters included and which regions are covered? Yes, the unit is supplied with plug adapters for EU, GB and USA, enabling direct connection in those regions. Is the YKA-16 suitable for professional scales? The adapter is intended as an external power supply for scales and related accessories; its regulated 9 V DC / 100 mA output is suitable for many small weighing instruments and peripherals. What is the weight and portability of the adapter? The adapter weighs approximately 0.13 kg, offering a compact and lightweight option for mobile service kits and crowded workbenches. Manufacturer: KERN — Country of origin: CN