40.6 x 27 x 3.6/2.1 Granulator Knife For GALA Machines, 1.3207 EW9Co10 Carbide Steel - MetavCUT

Take advantage of the combination of wear-resistant 1.3207 EW9Co10 steel, an exact 40.6 x 27 x 3.6/2.1 mm fit and proven compatibility with GALA machines to ensure steady throughput and reduced scrap. Order the replacement knife directly via Metav Werkzeuge or consult our advisors if technical clarification is needed.

Granulator and Shredder Knife 40.6 x 27 x 3.6/2.1 — 1.3207 EW9Co10 (MetavCUT)

The Granulator and Shredder Knife 40.6 x 27 x 3.6/2.1 is a precision wear part for GALA recycling and pelletising equipment, designed to provide consistent cutting and reliable production performance

• Precision-ground 1.3207 EW9Co10 steel blade
• Exact fit for GALA recycling machines
• Clean, uniform granulate with low dust

Consistent pellet quality from a purpose-built alloy

The blade is produced from 1.3207 EW9Co10, a steel grade selected for its wear characteristics in cutting applications. When mounted in a granulator or shredder, the component delivers a sharp, repeatable cutting edge that promotes uniform particle size and reduces fines. For plant engineers this means more predictable downstream processing and fewer rejects. The material choice supports extended service life under continuous operation, making the component a reliable replacement in high-throughput recycling lines.

Reduced downtime through precise dimensions and fit

With nominal dimensions of 40.6 x 27 x 3.6/2.1 mm, the knife is manufactured to tight tolerances to ensure an accurate fit in GALA machines. This precision fit reduces time spent on adjustment during replacement, shortens maintenance windows and lowers the risk of incorrect mounting. Clear dimensional conformity helps maintenance teams standardise spare-part inventories and speeds up changeovers, contributing directly to improved overall equipment effectiveness.

Better processing, less contamination and maintenance effort

Sharp, well-matched cutting edges lead to consistent granulate and reduced dust generation, which in turn simplifies screening and washing stages. The geometry implied by the step thickness 3.6/2.1 mm supports stable cutting behaviour across variable feed materials such as film, pipes, sprues and bulky parts. As a wear part, the blade’s performance profile is focused on delivering clean cuts and lowering the frequency of secondary operations, which benefits production planning and environmental handling of recyclate.

Typical applications and safe handling guidance

This component is intended for use in GALA recycling systems, shredders, and pelletisers where reliable sizing of plastic waste is required. Common applications include processing of films, plates, pipes and sprues as well as reprocessing after extrusion for regranulate production. During replacement, standard safety and lockout procedures should be followed; the knife is a consumable wear item and should be inspected regularly for nicks and loss of edge. When select-fit replacement is maintained, the result is a steady feed of material suitable for immediate downstream use.

For reliable replacements and technical guidance on MetavCUT granulator knives order through Metav Werkzeuge or call +49 2822 7131930 / info@metav-werkzeuge.com to ensure minimal production interruption

Technical Data

• Article number: GALA--40.6x27x3.6/2.1-13207-EW9Co10
• Description: Granulator and Shredder Knife 40.6 x 27 x 3.6/2.1 for GALA machines
• Manufacturer: MetavCUT

Facts

• Dimensions: 40.6 x 27 x 3.6/2.1 mm
• Material grade: 1.3207 EW9Co10
• SKU: GALA--40.6x27x3.6/2.1-13207-EW9Co10

Special features

• Wear part for recycling and pelletising systems
• Suitable for shredders, granulators and pelletisers
• Designed for processing film, plates, pipes, sprues and similar plastics

FAQ

Is this knife compatible with all GALA shredders and granulators?
The knife is specified for installation in GALA recycling and granulation machines; the Granulator and Shredder Knife 40.6 x 27 x 3.6/2.1 (MetavCUT, SKU GALA--40.6x27x3.6/2.1-13207-EW9Co10) is produced to match the dimensional requirements indicated for compatible models.

What materials can be processed with this blade?
The knife is intended for typical recycling feeds such as plastic films, pipes, plates and injection-moulding sprues; it is suitable for general plastic waste streams handled by GALA equipment and for regranulation after extrusion.

How does the material 1.3207 EW9Co10 affect service life?
The grade 1.3207 EW9Co10 is chosen for wear resistance in cutting tasks; in practice this translates to longer intervals between regrinds or replacements when used under correct operating conditions in granulators and shredders.

Are installation instructions included with the part?
Replacement knives are supplied as spare parts for GALA machines; installers should follow the machine manufacturer's mounting and safety instructions when fitting the MetavCUT knife to ensure correct alignment and secure fastening.

Can the blade improve downstream processing quality?
A correctly dimensioned and sharp knife contributes to uniform granulate and reduced dust levels, which improves screening, washing and extrusion behaviour for subsequent processing stages.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

We offer with our MetavCUT brand an economical alternative to original manufacturer parts: our process-optimised wear parts are precisely matched, durable and specially developed for productive use.