200 kg Hanging Scale 0.5 kg Readability, Peak-Hold, Stainless Hook & Carabiner - KERN

The robust stainless-steel build and integrated safety closure ensure reliable, corrosion-resistant fastening for hanging scales; combine secure attachment with a lightweight design to streamline workshop workflows. Order genuine KERN accessories directly via Metav Werkzeuge or consult our specialists for compatibility advice. Carabiner HCB-A01 — stainless-steel carabiner with safety closure (KERN) The Carabiner HCB-A01 is a stainless-steel accessory for hanging scales, engineered to provide a secure attachment point with a positive safety closure for routine industrial and workshop use. Stainless-steel construction for corrosion resistance Integrated safety closure for secure fastening Compatible with KERN hanging scales HCB and HCN Lightweight design, approx. 0.12 kg Secure fastening that protects loads and staff The primary advantage of this attachment is its safety closure, which reduces the risk of accidental release during lifting or weighing operations. Manufactured from stainless steel, the fastening resists corrosion in workshop environments and maintains mechanical integrity over time. This combination of durability and fail-safe latching translates into fewer interruptions in production and lower inspection effort for suspended weighing setups. The benefit is straightforward: reliable connection points that preserve measurement integrity and enhance operational safety. Efficient workshop integration and handling Thanks to its lightweight design and compact form factor, this carabiner integrates easily into existing rigging for hanging scales, reducing added mass on delicate load cells and fixtures. The modest weight contributes to smoother handling when attaching loads and simplifies storage in tool kits. Where downtime is critical, the quick‑action closure speeds repeated use without compromising security, supporting efficient processes in industrial, trade and service environments that rely on frequent weighing tasks. Compatibility and practical application notes This accessory is designed for use with KERN hanging scales and is compatible with models in the HCB and HCN series, covering typical workshop weighing ranges. The stainless-steel material supports long-term use in general workshop conditions; when paired with corresponding scales, the attachment provides a secure interface that helps maintain accurate readings by preventing slippage or unintended detachment. For bespoke rigging or unusual load geometries, consider using the carabiner with appropriate certified slings or connectors to ensure a compliant lifting arrangement. For secure, long-lasting rigging choose the KERN stainless-steel carabiner and contact Metav Werkzeuge in Emmerich for technical advice or order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: HCB-A01 Manufacturer: KERN Material: Stainless steel GTIN: 4045761030152 Country of origin: CN Facts Weight: 0.12 kg Tariff number: 84239010 Compatible with KERN HCB (≤ 200 kg) and HCN (≥ 100 kg) hanging scales Special features Safety closure Corrosion-resistant stainless-steel construction Lightweight workshop accessory FAQ What material is the carabiner made from? The carabiner is made from stainless steel, providing corrosion resistance and long service life for workshop use. Which KERN scales are compatible with this attachment? This accessory is compatible with KERN hanging scale models in the HCB and HCN series, designed to match typical workshop weighing ranges. How does the safety closure work? The integrated safety closure provides a positive latch that reduces the likelihood of accidental opening during lifting and weighing operations. Manufacturer: KERN — Country of origin: CN — SKU: HCB-A01

Take advantage of a corrosion-resistant stainless-steel design combined with a secure safety latch for reliable lifting on KERN hanging scales; robust compatibility with KERN HCB and HCN models helps streamline workshop workflows. Order the accessory directly via Metav Werkzeuge or consult our specialists for further technical clarification. Hook HCB-A02 — stainless-steel hanging-scale hook with safety latch Hook HCB-A02 is a dedicated stainless-steel hook designed for use as an accessory on KERN hanging scales, providing a compact and secure connection for a range of weighing applications. Stainless steel construction for longevity and corrosion resistance Integrated safety latch to prevent accidental detachment Compatible with KERN HCB and HCN hanging scales Compact, lightweight design for easy handling Reliable connection for routine weighing tasks The stainless-steel construction delivers corrosion-resistant performance, ensuring long service life in workshop and industrial environments where humidity and handling cause accelerated wear. Because the hook is made from stainless steel, maintenance requirements are minimal: routine inspection for deformation and latch integrity is sufficient to maintain safe operation. This accessory was conceived as a practical component for weighing set-ups, optimising the attachment point between load and scale while preserving the accuracy and repeatability of the measurement chain. Safe handling through a positive locking mechanism An integrated safety latch reduces the risk of accidental release during handling or dynamic loads, which is especially relevant when measuring suspended items. The latch mechanism is engineered to remain closed under normal loading and to be easy to check visually, supporting safer operation without extensive additional training. For procurement and quality assurance teams, this translates into a measurable reduction in handling incidents and clearer compliance with internal safety checks. Broad compatibility for flexible workshop use Designed as an accessory for KERN’s range of hanging scales, the hook is compatible with the HCB series and the HCN series, making it a versatile part for workshops that use multiple scale types. Its compact dimensions and light mass keep additional inertia low, which helps maintain stable readings on sensitive weighing devices. Specifying this accessory reduces the need for bespoke connectors and simplifies equipment standardisation across production lines and service departments. Practical benefits for purchasing and operation Selecting a dedicated stainless-steel hook streamlines inventory and maintenance planning: the material choice minimises corrosion-related replacements and the simple mechanical design eases inspection routines. The accessory supports continuous operation by offering a robust interface for suspended weighing tasks and complements existing KERN equipment without altering measurement performance. For purchasing professionals, this represents an efficient means to extend the functional life of established weighing systems while keeping servicing straightforward. Contact Metav Werkzeuge in Emmerich for procurement support, technical advice or to confirm compatibility with existing KERN equipment; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Hook HCB-A02 and matched accessories Technical Data Article number: HCB-A02 SKU: HCB-A02 Manufacturer: KERN Material: stainless steel Weight: 0.15 kg Facts Compatible with KERN HCB (weighing range ≤ 200 kg) and HCN (weighing range ≥ 100 kg) Suitable as a hanging-scale attachment Special features Safety latch included Corrosion-resistant construction Lightweight and compact design FAQ Is this hook compatible with KERN hanging scales? Yes. The Hook HCB-A02 is compatible with KERN HCB and HCN hanging-scale series and designed as a direct accessory for those models. What material is the hook made from and why does it matter? The hook is manufactured from stainless steel, providing corrosion resistance and reduced maintenance compared with untreated metals; this benefits longevity in workshop environments. Does the hook include a safety mechanism to prevent accidental release? The accessory features an integrated safety latch to reduce the risk of unintended detachment during lifting and weighing operations. How heavy is the hook and does that affect scale readings? The Hook HCB-A02 weighs 0.15 kg. Its low mass keeps added inertia minimal, preserving stable readings on sensitive hanging scales. Can the hook be used in industrial environments with frequent handling? Yes. The stainless-steel construction and simple latch mechanism make it suitable for repeated handling in industrial and workshop contexts. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930

Take advantage of a durable, safety-focused hook that combines robust zinc-plated cast-steel construction with ready-to-fit hardware for fast integration into lifting systems. The secure latch reduces risk during handling while the included shackles and connecting bolt speed up assembly. Order the hook directly via Metav Werkzeuge or contact our consultants for application-specific advice. Hook KERN YHA-06 – safety latch, zinc-plated cast-steel hook The Hook KERN YHA-06 is a zinc-plated and painted cast-steel hook with an integrated safety latch, designed for use with crane scales and lifting equipment where reliable load attachment is required. Safety latch for secure load holding Zinc-plated cast steel, painted finish Supplied with 2 shackles and connector Compatible with KERN HCB crane scales Reduce downtime with a ready-to-fit lifting accessory The robust zinc-plated cast steel construction and painted finish provide corrosion resistance and mechanical durability that keep workshop routines running. Supplied hardware such as two shackles and a connection link means fewer procurement steps and quicker installation on site. For industrial environments where continuity matters, this accessory delivers measurable savings in assembly time while maintaining safe operation. Minimise risk through a positive locking mechanism A built-in safety latch offers secure load retention during lifting and handling, lowering the likelihood of accidental release. This mechanical safeguard is particularly valuable in repetitive lifting tasks or outdoor operations where load movement and vibration are factors. The latch’s design focuses on functional reliability rather than complexity, making inspection and routine checks straightforward. Straightforward compatibility with scale systems and accessories Designed to mate with KERN scale equipment, the hook is noted as compatible with KERN HCB models and suitable for applications involving scales with a weighing range of ≥100 kg. Inclusion of the painted screw bolt and connection link facilitates rapid assembly to most crane-scale suspension arrangements. Where traceability is required, the product’s SKU: YHA-06 and GTIN are available for inventory and compliance records. Contact Metav Werkzeuge at info@metav-werkzeuge.com or on +49 2822 7131930 for tailored technical advice and fast supply from our Emmerich stock Technical data Article number: YHA SKU: YHA-06 GTIN: 4045761208612 Manufacturer: KERN Origin: DE Weight: 1.32 kg Core specifications Weight: 1.32 kg Included shackles: 2 Included connection link: 1 Suitable for weighing range: ≥100 kg Features & compatibility Material: zinc-plated and painted cast steel Safety latch for secure load holding Supplied with 2 shackles, 1 painted screw bolt and 1 hook Compatible with KERN HCB crane scale models FAQ What material is the hook made from? The hook is manufactured from zinc-plated and painted cast steel, providing mechanical strength and corrosion resistance for industrial use. Is the hook supplied with fittings for installation? Yes, the delivery includes two shackles, one painted screw bolt and one connection link for immediate assembly to compatible suspension systems. Can this hook be used with KERN crane scales? The hook is compatible with KERN HCB models and suited for use with scales that have a weighing range of ≥100 kg. Does the hook have a safety mechanism to prevent accidental release? A safety latch is integrated into the design to reduce the risk of unintentional load release during lifting and handling. How should load limits be determined for safe use? Load limits are determined by the rated capacity of the lifting system and the crane scale in use; the hook should be operated within those specified limits to ensure safety. KERN · Germany · Contact not specified in product data

Take advantage of the combination of high-strength construction, a hot-dip galvanised cast-steel bow and a curved profile for reliable and secure crane-scale connections. Order the shackle directly via Metav Werkzeuge or ask our consultants if needed. KERN YSC-04 High-Strength Shackle — Hot-dip galvanised cast-steel bow, curved form The KERN YSC-04 High-Strength Shackle is an accessory for crane scales, engineered to provide secure load attachment and dependable performance in industrial weighing and lifting applications. High-strength shackle design Hot-dip galvanised cast-steel bow Curved profile for improved load seating Supplied as pair with painted screw bolts Robust construction for secure lifting and weighing The shackle combines a high-strength component design with a hot-dip galvanised cast-steel bow, producing a connection point that resists corrosion and maintains structural integrity in demanding environments. As an accessory tailored to crane scales, the component supports consistent load transfer between hook and load cell, reducing measurement variability. The curved profile ensures that the load seats correctly in the bow, lowering localised stress and helping to preserve both the shackle and the connected scale during repeated use. This results in fewer service interruptions and a steadier production flow for routine weighing tasks. Practical advantages and compatibility explained Delivered as a pair with painted screw bolts, the package simplifies immediate installation and replacement cycles on site. The item weight of 0.39 kg per shackle keeps handling straightforward during maintenance, while the design is intended for use with crane scales that have a weighing range of ≥ 0.5 t, ensuring mechanical compatibility in medium- to heavy-duty setups. The curved bow is not merely aesthetic: by improving contact geometry it reduces asymmetric loading and helps maintain accurate readings by the scale’s load cell. The straightforward mechanical design also eases visual inspection and routine checks, supporting predictable upkeep intervals. Reliability from trusted origins and sensible workshop supply Manufactured by KERN in Germany, the component arrives as a clear specification for workshops and industrial users who require dependable accessories for weighing equipment. Sourcing such parts through a central supplier reduces procurement complexity: Metav combines broad product availability with a quality filter located in Emmerich, ensuring that components meet consistent standards before shipment. The material choice and galvanised finish are selected to extend service life in standard industrial atmospheres, offering a cost-effective way to protect critical weighing interfaces and to maintain measurement reliability across operations. Choose the KERN YSC-04 for robust crane-scale connections and contact Metav Werkzeuge in Emmerich for specification advice or to request additional technical data via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: YSC-04 SKU: YSC-04 Brand: KERN Origin: DE GTIN: 4045761271852 Tariff code: 84239010 Facts Weight: 0.39 kg Suitable for scales with weighing range: ≥ 0.5 t ECLASS: 23130102 Special features Hot-dip galvanised cast-steel bow Curved profile for improved load seating Supplied as 2 shackles with painted screw bolts Intended as accessory for crane scales Manufacturer: KERN FAQ What is the primary application of this shackle? The KERN YSC-04 high-strength shackle is designed as an accessory for crane scales and heavy-duty weighing applications where secure load attachment is required. Is the shackle corrosion-resistant for outdoor use? The hot-dip galvanised cast-steel bow provides corrosion-resistant properties suitable for standard industrial atmospheres; the KERN YSC-04 benefits from this finish to extend service life. How many pieces are included in the delivery? Delivery comprises two shackles supplied with painted screw bolts as specified in the product details for the KERN YSC-04. Which weighing ranges are compatible with this accessory? Compatibility is intended for crane scales with a weighing range of ≥ 0.5 t, ensuring mechanical and metrological suitability for medium- to heavy-duty scales. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930