1000 kg Crane Scale With Integrated Display, 0.5 kg Readability, Peak-Hold, IP Not Specified - KERN
€670.00
Product information "1000 kg Crane Scale With Integrated Display, 0.5 kg Readability, Peak-Hold, IP Not Specified - KERN"
Take advantage of the compact design, TÜV‑certified safety and clear integrated readout for reliable handling and quick weight checks; order the unit directly via Metav Werkzeuge or ask our consultants for technical advice.
KERN HFA 1T-4 Crane Scale — 1,000 kg capacity, integrated display
The KERN HFA 1T-4 is a compact crane scale with an integrated LCD display designed for industrial weighing and tension measurements in production, logistics and construction environments.
- Integrated display for immediate readings
- TÜV‑certified to EN 13155 and EN 61010‑1
- Peak‑hold and hold functions for stable readout
- Compact, lightweight design for easy installation
Precise heavy‑load weighing for efficient handling
The KERN HFA 1T‑4 delivers accurate weighing up to 1,000 kg with a readability of 0.5 kg and a reproducibility of 0.5 kg, providing dependable values for loading, unloading and inventory checks. The instrument is built around a strain gauge load cell, a proven measurement principle that converts force into an electrical signal; this ensures linear response across the capacity and a declared linearity of ±1 kg. Features such as peak‑hold highlight transient loads, while tare and the display hold function support fast, unambiguous readings during operations where the load or motion makes direct observation difficult.
Compact construction that suits machines and tight spaces
Designed for minimal footprint, the device measures 90 × 55 × 255 mm and weighs only 1.8 kg, which allows for space‑saving installation in gantry systems, cranes or fixed lifting rigs. Battery operation (3 × 1.5 V AA) and a battery life of about 40 h permit mobile use on sites without continuous mains access, while the included plug‑in power supply supports 100–240 V operation with CH, EU and UK plug options. These characteristics make the scale particularly useful where portability and quick redeployment are required, reducing downtime and simplifying on‑site weighing tasks.
Readable display and practical functions for everyday work
The integrated LCD display with a digit height of 23 mm ensures values are legible at a glance from a distance, speeding up handling and documentation. The unit’s compact display and straightforward controls reduce training time for operators and contribute to safer workflows. Robust features such as peak‑hold, hold and tare translate technical capabilities into operational benefits: clearer decision making during lifts, faster cycle times at loading bays and reduced risk of human error when recording weights.
Built to meet safety standards and industrial demands
Compliance with EN 13155 (loose lifting attachments) and EN 61010‑1 (electrical safety) is confirmed by TÜV marking, underlining suitability for industrial and construction settings where regulatory adherence is essential. The sturdy construction and low own weight combine to provide a dependable measuring device for warehouses, ports and recycling centres. With a usable humidity range up to 80% and an operating temperature range between 5 °C and 35 °C, the instrument is engineered for common industrial environments and rapid operational cycles.
Contact Metav Werkzeuge today for tailored advice on the KERN HFA 1T‑4 crane scale and secure a TÜV‑certified, compact weighing solution delivered from Emmerich.
Technical data
- Article number: HFA.1T-4
- GTIN: 4045761144286
- Manufacturer: KERN
Facts
- Capacity: 1,000 kg
- Readability: 0.5 kg
- Reproducibility: 0.5 kg
- Linearity: ± 1 kg
- Weight: 1.8 kg
- Dimensions (housing without removable parts): 90 × 55 × 255 mm
- Display digit height: 23 mm
- Display type: LCD
- Battery: 3 × 1.5 V AA
- Battery operating time: 40 h
- Operating temperature: 5 °C – 35 °C
- Max ambient humidity: 80 %
- Input voltage adaptor: 100 V – 240 V, 50 / 60 Hz
Special features
- Strain gauge load cell
- Integrated display for direct readings
- Peak‑hold function
- Hold function for stable readout
- Tare function
- TÜV‑certified to EN 13155 and EN 61010‑1
- Power adapter included (CH; EU; UK)
- Suitable for tension (pull) measurements
- Origin country: CN
- UN number (dangerous goods): 3496
- Commodity code: 84238220
FAQ
What maximum load can be weighed with the KERN HFA 1T‑4?
The KERN HFA 1T‑4 crane scale has a maximum capacity of 1,000 kg and offers a readability of 0.5 kg for standard industrial weighing tasks.
How is the device powered and how long does the battery last?
The unit runs on 3 × 1.5 V AA batteries with an operating time of approximately 40 hours; a universal mains adaptor (100–240 V) with CH, EU and UK plugs is included.
Is the scale suitable for use on construction sites and in ports?
Yes, the scale is designed for industrial environments and meets EN 13155 and EN 61010‑1 safety standards, making it suitable for construction, logistics and port operations.
Which functions support reading fluctuating loads?
Peak‑hold and display hold functions allow transient or moving loads to be captured and read reliably, while tare enables zeroing with pre‑loads.
What measurement technology is used in the instrument?
The device uses a strain gauge load cell, a standard and robust method for converting force into electrical signals to ensure linear and reproducible results.
Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
Zubehör
Benefit from the combination of a safety latch, robust galvanised cast-steel construction and compact 1 kg weight for reliable, space-efficient integration into lifting systems; order the YHA-01 hook directly via Metav Werkzeuge or ask our consultants if needed YHA-01 Hook — Hook with safety latch for crane scale, galvanised cast steel (KERN) A YHA-01 Hook for crane scales that combines a positive-lock safety latch with durable zinc-plated, painted cast-steel construction for workshop and industrial weighing applications Safety latch prevents accidental release Zinc-plated, painted cast-steel construction Compatible with scales up to 1 t Manufactured by KERN for industrial use Secure lifting through a positive-lock safety latch The primary function of the component is to keep suspended loads secured during weighing and handling. The built-in safety latch is a mechanical catch that prevents the unintended opening of the hook under load, reducing the risk of dropped parts or interrupted processes. For operations where load retention matters, this feature supports safer handling and contributes to predictable production flow, delivering a measurable reduction in handling incidents. Robust construction for long service life in workshops Constructed from galvanised cast steel and finished with a protective paint layer, the component resists wear and environmental influences better than untreated fittings. The corrosion-resistant surface treatment preserves contact points and bearing areas, lowering maintenance needs and extending replacement intervals. At an item weight of 1 kg, it is compact enough for straightforward installation without compromising mechanical strength, making it suitable for busy workshop environments where reliability and durability are essential. Compatibility that preserves weighing accuracy The hook is intended as an accessory for crane scales and is compatible with scales up to 1 t, including a range of KERN models. Correct mechanical interfaces and matched load transfer paths are important for maintaining stable readings during weighing; using an accessory specified for the weighing range helps avoid measurement artefacts caused by improper attachment geometry or unintended movement. Where traceable results are required, the matched accessory approach supports consistent, reproducible weighing. Simple integration, low upkeep and professional sourcing Installation requires only standard lifting hardware and routine inspection of the latch and surface finish; no specialised tools are needed for normal assembly. The product supports a pragmatic maintenance routine — visual checks and lubrication where applicable — reducing downtime. Sourced from the established manufacturer KERN and supplied via Metav Werkzeuge, the component benefits from reliable logistics and a quality-oriented supply chain, aligning with Metav’s commitment to democratising precision for workshops and industry. For procurement or technical advice on the KERN YHA-01 hook and its suitability for specific crane scale installations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — assistance from our consultants is available to ensure the right match for the application Technical data Article number: YHA-01 Manufacturer: KERN GTIN: 4045761193055 Country of origin: Germany Tariff code: 84239010 ECLASS: 23120201 Core figures Weight: 1 kg Suitable for scales: ≤ 1 t SKU: YHA-01 Special features Safety latch for secure load retention Cast-steel, zinc-plated and painted Compatible with KERN HFA 1T4, HFA 600K-1, HFC 1T-4, HFC 600K-1 Industrial accessory for crane scales FAQ What types of scales is this hook suitable for? The KERN YHA-01 hook is suitable for crane scales and accessories rated up to 1 t; compatibility with specific KERN models is noted in the technical data. What material and surface treatment does the hook have? The hook is made from cast steel with a zinc-plated finish and an additional paint layer to enhance corrosion resistance. Which items are included with the YHA-01 on delivery? The product page for the KERN YHA-01 lists the exact scope of delivery; the page should be consulted for the definitive list of fastening fittings included. Can the hook be used outdoors? The galvanised and painted finish provides protection suitable for workshop and outdoor use, though regular inspection and maintenance are recommended for long-term exposure. How does the safety latch improve operational safety? The mechanical safety latch prevents accidental opening under load, maintaining secure retention of suspended components and reducing the likelihood of handling incidents. KERN, Germany
Take advantage of a high-strength connection that combines long-term corrosion protection and secure fastening for reliable lifting operations; order the required shackle directly via Metav Werkzeuge or contact our consultants for compatibility details. YSC-01 Shackle for Crane Scale – High-strength, Hot-dip Galvanised Forged Steel A YSC-01 Shackle for the KERN crane scale, engineered as a curved, hot-dip galvanised forged-steel link with a painted screw bolt, suitable for crane scale models with a weighing range up to 5 t High-strength forged shackle, curved form Hot-dip galvanised, painted steel finish Includes painted screw bolt, secure fastening Suitable for crane scales up to 5 t Robust connection for heavy lifting The forged, curved bracket provides a reliable mechanical interface between load and instrument. Manufactured in hot-dip galvanised forged steel, the link is dimensioned to distribute forces evenly across the eye, reducing local stress peaks and helping to maintain measurement integrity under load. Compatibility with KERN HFA and HFC crane scales for models rated up to 5 t ensures the shackle integrates with common industrial weighing systems and supports consistent, traceable lifting operations. Secure fastening that simplifies handling A painted screw bolt secures the connection and is designed for straightforward installation and removal while maintaining a high level of locking security. The secure screw bolt reduces the risk of accidental loosening during use and aids rapid assembly in workshop and site environments. At a handling weight of approximately 1.5 kg, the component is easy to position without compromising robustness, making routine changes or inspections uncomplicated for technicians and service staff. Low maintenance for continuous operation The hot-dip galvanised finish and painted bolt combine to offer enhanced corrosion resistance, extending service life in galvanic or outdoor environments and minimising downtime for replacement. As a German-made accessory from KERN, the design focuses on durability and fit with established crane weighing ranges, providing a cost-effective way to keep weighing setups operational without compromising safety or performance. Contact Metav Werkzeuge in Emmerich for precise compatibility checks or to discuss order options; our consultants can confirm suitability for your KERN crane scale models and provide prompt supply from our German warehouse (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: YSC-01 GTIN: 4045761193086 Manufacturer: KERN Country of origin: DE Core figures Weight: 1.5 kg Suitable for weighing range: up to 5 t Tariff number: 84239010 Special features Hot-dip galvanised forged-steel bracket Curved form for even load distribution Painted screw bolt for secure fastening Compatible with KERN HFA and KERN HFC crane scales Scope of delivery includes 2 shackles with painted screw bolt FAQ Is the shackle compatible with KERN crane scales? The YSC-01 shackle is compatible with KERN HFA and HFC crane scales for models with a weighing range up to 5 t. What material and corrosion protection does the shackle use? The shackle is made from forged steel with a hot-dip galvanised finish and a painted screw bolt to provide enhanced corrosion resistance. What is included in the delivery? The scope of delivery lists 2 shackles with painted screw bolt as supplied items for this SKU (YSC-01). How heavy is the shackle and how does that affect handling? The component weighs approximately 1.5 kg, allowing for easy handling during installation while maintaining required robustness. Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich, Germany; Contact: info@metav-werkzeuge.com, +49 2822 7131930