1000 kg Crane Scale 0.5 kg Readability Compact Nylon Hand Terminal, EN 13155 / EN 61010-1 - KERN
€1,070.00
Product information "1000 kg Crane Scale 0.5 kg Readability Compact Nylon Hand Terminal, EN 13155 / EN 61010-1 - KERN"
Take advantage of the combination of compact design, robust metal housing and reliable remote readout to maintain efficient, safe lifting operations; order the unit directly via Metav Werkzeuge or ask our consultants for technical advice.
KERN HFC 1T-4 compact crane scale with handheld radio terminal
The KERN HFC 1T-4 is a compact crane scale designed for use in harsh industrial environments and confined installation spaces, offering clear remote readout via a portable handheld terminal
- TÃœV-certified to EN 13155 and EN 61010-1
- Compact metal housing for confined installations
- Handheld terminal with radio range up to 20 m
- Long battery runtime of 40 h
Optimised weighing for tight spaces and continuous workflows
The compact crane scale delivers a practical solution where space is restricted and handling speed matters. Its metal housing and reduced footprint simplify integration into existing lifting gear or production lines, allowing installation in confined areas without sacrificing durability. The lightweight construction (approx. 1.7 kg) reduces additional load on hoists and facilitates fast repositioning. By combining a rugged enclosure with a concise form factor, the unit supports uninterrupted material flow and helps avoid costly downtime caused by cumbersome, oversized measuring devices.
Proven measurement technology and reliable results
Accuracy is ensured by the strain gauge weighing system and precise electronics, providing consistent repeat readings and controlled linearity. The instrument features a clear LCD with a 23 mm digit height, making values legible even in unfavourable light. Key functions such as peak-hold for detecting transient load peaks, a hold function to freeze readings and tare for zeroing under load allow straightforward evaluation of dynamic lifting tasks. These elements together reduce inspection time and support safer, faster decisions during weighing operations.
Built for demanding industrial use and certified safety
Compliance with recognised standards is a central asset: the device is TÃœV-certified to EN 13155 and EN 61010-1, signifying both load-handling safety and electrical protection for industrial settings. The combination of certified design and robust components makes this scale well suited to construction sites, ports, recycling yards and production halls. The integrated radio module and secure hand strap ensure that, even when the load and the operator are separated, measurement data remains accessible and trustworthy, supporting conformity checks and documentation workflows.
Practical handling, long autonomy and flexible power options
Operational convenience is emphasised by a 40 h battery runtime and a charging period of approximately 12 h, enabling long deployment between charges. The supplied mains adapter covers multiple plug types (CH, EURO, UK) and accepts a wide input range (100–240 V, 50/60 Hz), simplifying use across international sites. Remote readout is possible up to 20 m, so readings can be taken safely at a distance from moving loads. Together, these features reduce handling interruptions and contribute to a smoother, more productive lifting routine.
For tailored advice or to secure a reliable compact crane scale from Metav Werkzeuge — including delivery from our Emmerich quality hub — contact our consultants and request the HFC series details for your application
Technical data
- Article number: HFC.1T-4
- Manufacturer: KERN
- GTIN: 4045761144590
- Country of origin: CN
Core data
- Readability: 0.5 kg
- Reproducibility: 0.5 kg
- Linearity: ± 1 kg
- Battery runtime: 40 h
- Charging time: 12 h
- Display digit height: 23 mm
- Operating temperature: 5 °C–35 °C
- Max. ambient humidity: 80 %
- Range (radio): up to 20 m
- Weight: 1.7 kg
- Power input: 100 V–240 V, 50/60 Hz
Special features
- Material: metal housing
- Display type: LCD
- Weighing system: strain gauge
- TÃœV-certified: EN 13155, EN 61010-1
- Functions: peak-hold, hold, tare
- Integrated radio module
- Handheld terminal with hand strap
- Plug adapters included: CH, EURO, UK
- Suitable for harsh environments and confined spaces
FAQ
What standards and certifications does the crane scale comply with?
The scale is TÃœV-certified to EN 13155 and EN 61010-1, confirming safe load handling and electrical safety for industrial use with the KERN HFC 1T-4 crane scale.
How are readings taken when the operator cannot access the load directly?
An integrated radio module transmits measurements to the portable handheld terminal; the HFC 1T-4 supports remote readout at distances of up to 20 m so values remain accessible even at a safe distance.
What endurance can be expected between charges?
Battery capacity offers approximately 40 h of operation, with a charging time of about 12 h, ensuring extended autonomous use in shift-based work environments.
Which display features aid readability on site?
The unit uses an LCD with a digit height of 23 mm and includes hold and peak-hold functions to stabilise transient readings for clear evaluation.
Is the scale suitable for outdoor or heavy-duty industrial environments?
Yes; the robust metal housing, strain gauge system and relevant certifications make the device appropriate for construction, logistics and recycling applications.
Manufacturer: KERN — Address: not provided — Contact: not provided
Zubehör
Benefit from the combination of a safety latch, robust galvanised cast-steel construction and compact 1 kg weight for reliable, space-efficient integration into lifting systems; order the YHA-01 hook directly via Metav Werkzeuge or ask our consultants if needed YHA-01 Hook — Hook with safety latch for crane scale, galvanised cast steel (KERN) A YHA-01 Hook for crane scales that combines a positive-lock safety latch with durable zinc-plated, painted cast-steel construction for workshop and industrial weighing applications Safety latch prevents accidental release Zinc-plated, painted cast-steel construction Compatible with scales up to 1 t Manufactured by KERN for industrial use Secure lifting through a positive-lock safety latch The primary function of the component is to keep suspended loads secured during weighing and handling. The built-in safety latch is a mechanical catch that prevents the unintended opening of the hook under load, reducing the risk of dropped parts or interrupted processes. For operations where load retention matters, this feature supports safer handling and contributes to predictable production flow, delivering a measurable reduction in handling incidents. Robust construction for long service life in workshops Constructed from galvanised cast steel and finished with a protective paint layer, the component resists wear and environmental influences better than untreated fittings. The corrosion-resistant surface treatment preserves contact points and bearing areas, lowering maintenance needs and extending replacement intervals. At an item weight of 1 kg, it is compact enough for straightforward installation without compromising mechanical strength, making it suitable for busy workshop environments where reliability and durability are essential. Compatibility that preserves weighing accuracy The hook is intended as an accessory for crane scales and is compatible with scales up to 1 t, including a range of KERN models. Correct mechanical interfaces and matched load transfer paths are important for maintaining stable readings during weighing; using an accessory specified for the weighing range helps avoid measurement artefacts caused by improper attachment geometry or unintended movement. Where traceable results are required, the matched accessory approach supports consistent, reproducible weighing. Simple integration, low upkeep and professional sourcing Installation requires only standard lifting hardware and routine inspection of the latch and surface finish; no specialised tools are needed for normal assembly. The product supports a pragmatic maintenance routine — visual checks and lubrication where applicable — reducing downtime. Sourced from the established manufacturer KERN and supplied via Metav Werkzeuge, the component benefits from reliable logistics and a quality-oriented supply chain, aligning with Metav’s commitment to democratising precision for workshops and industry. For procurement or technical advice on the KERN YHA-01 hook and its suitability for specific crane scale installations, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — assistance from our consultants is available to ensure the right match for the application Technical data Article number: YHA-01 Manufacturer: KERN GTIN: 4045761193055 Country of origin: Germany Tariff code: 84239010 ECLASS: 23120201 Core figures Weight: 1 kg Suitable for scales: ≤ 1 t SKU: YHA-01 Special features Safety latch for secure load retention Cast-steel, zinc-plated and painted Compatible with KERN HFA 1T4, HFA 600K-1, HFC 1T-4, HFC 600K-1 Industrial accessory for crane scales FAQ What types of scales is this hook suitable for? The KERN YHA-01 hook is suitable for crane scales and accessories rated up to 1 t; compatibility with specific KERN models is noted in the technical data. What material and surface treatment does the hook have? The hook is made from cast steel with a zinc-plated finish and an additional paint layer to enhance corrosion resistance. Which items are included with the YHA-01 on delivery? The product page for the KERN YHA-01 lists the exact scope of delivery; the page should be consulted for the definitive list of fastening fittings included. Can the hook be used outdoors? The galvanised and painted finish provides protection suitable for workshop and outdoor use, though regular inspection and maintenance are recommended for long-term exposure. How does the safety latch improve operational safety? The mechanical safety latch prevents accidental opening under load, maintaining secure retention of suspended components and reducing the likelihood of handling incidents. KERN, Germany
Take advantage of a high-strength connection that combines long-term corrosion protection and secure fastening for reliable lifting operations; order the required shackle directly via Metav Werkzeuge or contact our consultants for compatibility details. YSC-01 Shackle for Crane Scale – High-strength, Hot-dip Galvanised Forged Steel A YSC-01 Shackle for the KERN crane scale, engineered as a curved, hot-dip galvanised forged-steel link with a painted screw bolt, suitable for crane scale models with a weighing range up to 5 t High-strength forged shackle, curved form Hot-dip galvanised, painted steel finish Includes painted screw bolt, secure fastening Suitable for crane scales up to 5 t Robust connection for heavy lifting The forged, curved bracket provides a reliable mechanical interface between load and instrument. Manufactured in hot-dip galvanised forged steel, the link is dimensioned to distribute forces evenly across the eye, reducing local stress peaks and helping to maintain measurement integrity under load. Compatibility with KERN HFA and HFC crane scales for models rated up to 5 t ensures the shackle integrates with common industrial weighing systems and supports consistent, traceable lifting operations. Secure fastening that simplifies handling A painted screw bolt secures the connection and is designed for straightforward installation and removal while maintaining a high level of locking security. The secure screw bolt reduces the risk of accidental loosening during use and aids rapid assembly in workshop and site environments. At a handling weight of approximately 1.5 kg, the component is easy to position without compromising robustness, making routine changes or inspections uncomplicated for technicians and service staff. Low maintenance for continuous operation The hot-dip galvanised finish and painted bolt combine to offer enhanced corrosion resistance, extending service life in galvanic or outdoor environments and minimising downtime for replacement. As a German-made accessory from KERN, the design focuses on durability and fit with established crane weighing ranges, providing a cost-effective way to keep weighing setups operational without compromising safety or performance. Contact Metav Werkzeuge in Emmerich for precise compatibility checks or to discuss order options; our consultants can confirm suitability for your KERN crane scale models and provide prompt supply from our German warehouse (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: YSC-01 GTIN: 4045761193086 Manufacturer: KERN Country of origin: DE Core figures Weight: 1.5 kg Suitable for weighing range: up to 5 t Tariff number: 84239010 Special features Hot-dip galvanised forged-steel bracket Curved form for even load distribution Painted screw bolt for secure fastening Compatible with KERN HFA and KERN HFC crane scales Scope of delivery includes 2 shackles with painted screw bolt FAQ Is the shackle compatible with KERN crane scales? The YSC-01 shackle is compatible with KERN HFA and HFC crane scales for models with a weighing range up to 5 t. What material and corrosion protection does the shackle use? The shackle is made from forged steel with a hot-dip galvanised finish and a painted screw bolt to provide enhanced corrosion resistance. What is included in the delivery? The scope of delivery lists 2 shackles with painted screw bolt as supplied items for this SKU (YSC-01). How heavy is the shackle and how does that affect handling? The component weighs approximately 1.5 kg, allowing for easy handling during installation while maintaining required robustness. Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich, Germany; Contact: info@metav-werkzeuge.com, +49 2822 7131930