Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 09T301 J740 Wendeplatten - Tungaloy
Benefit from the combination of ISO‑standard compatibility, the J740 Tungaloy grade and a precise 0.1 mm corner radius to achieve stable edges and consistent finishing in turning operations; order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 09T301 J740 — ISO indexable turning insert for rhombic 80° applications, Tungaloy The CCGT 09T301 J740 is an ISO‑standard rhombic indexable insert for turning, engineered for external and internal operations with a 0.1 mm corner radius and a single‑sided chipbreaker. ISO rhombic insert, 80° cutting angle Grade J740 for balanced wear and toughness 0.1 mm corner radius for accurate finishing Cylindrical hole with 40°–60° countersink Increased productivity through balanced grade and geometry The combination of the J740 cutting grade and cemented carbide substrate delivers a deliberate balance between wear resistance and edge toughness, which supports consistent component quality during serial production. The 0.1 mm corner radius contributes to stable cutting forces and improved surface finish in finishing passes, while the single‑sided chipbreaker manages chip formation for predictable evacuation. Because the insert conforms to ISO dimensions, tool changeover and inventory management are simplified, reducing downtime and supporting higher throughput. Secure fitment and system compatibility that reduces setup time Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, all of which are addressed by this ISO‑spec insert. The plate’s 3.97 mm thickness and 7° clearance angle provide reliable seating in standard holders, and the cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping and repeatable positioning. These attributes make the insert straightforward to integrate into an established tooling system and help maintain consistent geometry across index changes. Practical application guidance for longer tool life and predictable results Select the appropriate chipbreaker and cutting parameters according to workpiece material, machining stability and desired surface quality; the right combination prolongs edge life and reduces scrap. This insert is suited to both external and internal turning tasks where a small corner radius and repeatable form are required. As part of a complete system, include a compatible holder, underlay/clamping set and replacement screws to ensure correct assembly and safe clamping. Regular inspection of edge condition and adherence to recommended feeds and speeds will maximise performance and return on tooling investment. For precision turning with Tungaloy’s J740 grade, contact Metav Werkzeuge for tailored application advice and to secure genuine CCGT 09T301 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6801314 Manufacturer SKU: TUN6801314 SKU: 6801314-Tungaloy Facts Thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Plate size: 09 Included angle: 80° Hole countersink: 40°–60° Special features Grade J740 (Tungaloy cutting grade) Cemented carbide material Rhombic plate form Single‑sided chipbreaker With cylindrical hole and one‑sided countersink ISO‑standard turning insert for external and internal turning FAQ What machining tasks is this insert intended for? The CCGT 09T301 J740 insert is designed for external and internal turning operations where a small corner radius and controlled chip formation are required. How does the J740 grade affect performance? The J740 grade provides a balanced combination of wear resistance and edge toughness, helping to deliver stable cutting performance and consistent surface quality with the CCGT 09T301 indexable insert. Which holder features are required for correct fitment? A holder matching the ISO rhombic form, the 7° clearance angle and the 09 size is required; secure clamping uses the insert’s cylindrical hole and the 40°–60° countersink configuration. Can the insert be used for finishing and semi‑roughing? Yes, with its 0.1 mm corner radius and single‑sided chipbreaker, the insert is well suited to finishing and controlled semi‑roughing, provided the correct chipbreaker and cutting parameters are selected. What is the item reference for ordering replacement inserts? Order using article number 6801314 or SKU 6801314‑Tungaloy for the genuine Tungaloy CCGT 09T301 J740 indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 KC5010 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Specifications for CCGT 09T301 insert from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T301LF-KC5010-KENNAMETAL Facts & Figures: ISO-Code: CCGT09T301 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.1 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T301-KC5010-Kennametal 40END
CCGT 09T301 KC5025 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Design details insert CCGT 09T301 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T301LF-KC5025-KENNAMETAL Data/ Figures: ISO-Code: CCGT09T301 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.1 Features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T301-KC5025-Kennametal 40END
CCGT 09T301 KC730 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts CCGT 09T301 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T301LF-KC730-KENNAMETAL Facts for the tool: ISO-Code: CCGT09T301 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.1 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T301-KC730-Kennametal 40END
CCGT 09T301 KCU10 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product features CCGT 09T301 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T301LF-KCU10-KENNAMETAL ISO-Code: CCGT09T301 Grade: KCU10 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.1 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T301-KCU10-Kennametal 40END
CCGT 09T301 KCU10B Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data indexable inserts CCGT 09T301 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T301LF-KCU10B-KENNAMETAL Facts for the tool: ISO-Code: CCGT09T301 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.1 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T301-KCU10B-Kennametal 40END
CCGT 09T301 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and secure ISO compatibility for consistent turning results; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. CCGT 09T301 NS9530 turning insert — Tungaloy, uncoated cermet for finishing The CCGT 09T301 NS9530 is an ISO-standard rhombic turning insert intended for fine finishing of steel components in continuous, low-depth turning operations. ISO rhombic insert CCGT 09T301 NS9530 Uncoated cermet for superior surface finish Sharp cutting edge and low cutting forces Cylindrical hole with 40°–60° countersink Exceptional surface quality for finishing operations Designed as a finishing grade, the uncoated cermet NS9530 provides a markedly improved surface finish and reduced cutting forces compared with conventional grades. The composition of the cermet promotes a sharp, stable edge that is particularly effective in continuous cuts and light feed turning. For applications where achieving a fine Ra value is critical, this insert delivers repeatable results while helping to lower machining-induced stresses on the workpiece. Geometry engineered for repeatability and accuracy The rhombic plate geometry combined with a small 0.1 mm corner radius yields precise edge contact and predictable wear patterns. The moderate clearance of 7° and the 80° principal angle support steady cutting engagement and minimise vibration, which translates into better dimensional control and fewer rework cycles. These geometric features are suited to delicate finishing passes where dimensional tolerance and surface integrity are priorities. Secure mounting and adaptable clamping As an ISO-standard insert, the component is compatible with a wide range of holders; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert includes a cylindrical hole with a one-sided countersink (40°–60°) that ensures reliable seating and clamping stability under finishing loads. This mechanical reliability reduces the risk of insert displacement and maintains consistency across production runs. Productivity through material choice and chip control The uncoated cermet construction offers low friction at the cutting edge, promoting stable chip formation and reduced built-up edge during continuous turning. The single-sided chipbreaker is tailored for finishing feeds and assists in producing short, controllable chips that ease evacuation and minimise surface damage. The combination of material and chip control supports higher throughput with reduced scrap rates. Practical handling and maintenance benefits With a plate thickness of 3.97 mm and standardised dimensions, storage, tool change and inventory management are straightforward. The insert’s clear marking and ISO designation simplify fast identification and replacement in the workshop, helping to keep set-up times short. For workshops focusing on efficient finishing of steel components, this grade balances tool life with excellent part quality. Choosing the right application setting Select the NS9530 finishing grade when working predominantly with steel and when the process calls for small depths of cut and continuous feeding. Match the chipbreaker and holder stability to the machining setup to exploit the insert’s strengths; in uncertain cases, assessment of feed, speed and rigidity will determine the optimal cutting parameters for consistent performance. For precision finishing with Tungaloy cermet grade NS9530, contact Metav Werkzeuge for availability and tailored machining advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967262 SKU: 6967262-Tungaloy Manufacturer SKU: TUN6967262 Model series: ISO-Drehwendeschneidplatten Designation: CCGT09T301 NS9530 Facts Corner radius: 0.1 mm Clearance angle: 7° Insert size: 09 Thickness: 3.97 mm Principal angle: 80° Special features Uncoated cermet grade NS9530 Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-standard turning insert Application: turning Typical use: finishing of steel FAQ What materials is this insert intended for? The NS9530 uncoated cermet insert is intended primarily for steel finishing; the grade is engineered for low cutting forces and high surface quality in steel turning operations. Is the insert compatible with standard ISO toolholders? Yes. The insert is an ISO-standard rhombic type; compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness. How does the 0.1 mm corner radius affect part quality? A 0.1 mm corner radius provides a fine cutting contact that helps to achieve improved surface finish and tighter dimensional control during finishing passes. Does the insert require a special chipbreaker? The insert comes with a single-sided chipbreaker tailored for finishing feeds; selecting the matching chipbreaker and cutting parameters will optimise chip control and surface integrity. What does the hole with countersink provide? The cylindrical hole plus one-sided countersink (40°–60°) ensures positive seating and reliable clamping, reducing the risk of insert movement during finishing operations. Can this insert be used for interrupted cuts? The grade is designed for continuous cuts and small depths of cut; for heavily interrupted cuts, an alternative grade with enhanced toughness is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 NS9530 Wendeplatten - Tungaloy
Take advantage of uncoated cermet performance and precise ISO compatibility for consistent finishing results; reliable clamping and a low-clearance geometry ensure stable turning and minimal rework — order the inserts directly via Metav Werkzeuge or ask our consultants for application advice. CCGT09T301 NS9530 CCGT turning insert for finishing by Tungaloy CCGT09T301 NS9530 is an ISO-format rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for excellent surface quality Uncoated cermet grade NS9530 for fine finishing ISO rhombic CCGT insert, 80° cutting geometry Cylindrical hole with single-sided countersink 40°–60° High-quality finishing for steel components The uncoated cermet composition and NS9530 designation prioritise surface integrity and repeatable part quality during continuous turning. As a finishing grade the insert is engineered for small depths of cut and steady feed rates, producing a finer surface without aggressive material removal. The sharp cutting edge reduces burr formation and helps maintain dimensional accuracy, which translates into lower downstream polishing or rework requirements. Secure clamping and standardised fit for flexible use Built to the ISO series for indexable turning inserts, the rhombic geometry and 80° included angle provide a predictable seat in compatible toolholders. Size 09 and a plate thickness of 3.97 mm ensure mechanical stability, while the cylindrical hole with a single-sided countersink (40°–60°) enables secure fastening with standard screws and clamp sets. The combination of standardised form, tolerance class and fastening features simplifies toolroom logistics and reduces setup time. Optimised machining with low cutting forces The single-sided chipbreaker and narrow corner radius of 0.1 mm deliver controlled chip formation and low cutting forces, supporting high surface finish even on long, slender workpieces. For operators less familiar with insert geometry: a small corner radius concentrates the cut at the edge for fine detail, while the chipbreaker guides chips away from the cutting zone to protect the workpiece and the tool. The result is predictable behaviour in continuous turning on steel substrates. Contact Metav Werkzeuge for tailored application guidance or to reserve CCGT09T301 NS9530 inserts for your finishing processes; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967216-Tungaloy Manufacturer SKU: TUN6967216 Manufacturer item number: 6967216 Label: CCGT09T301 NS9530 Tungaloy-Wendeplatte Core measurements Radius: 0.1 mm Included angle: 80° Clearance angle: 7° Thickness: 3.97 mm Size: 09 Corner radius: 0.1 mm Special features Uncoated cermet cutting material NS9530 Carbide substrate Rhombic plate form Single-sided chipbreaker ISO turning insert series With hole; cylindrical hole + single-sided countersink (40°–60°) Application: Turning FAQ What materials is this insert best suited for? The CCGT09T301 NS9530 insert is formulated as a finishing grade for steel and performs particularly well in continuous turning operations where surface quality is critical. How does the NS9530 grade affect surface finish? NS9530 is an uncoated cermet grade that provides a very sharp cutting edge and reduced cutting forces, resulting in improved surface integrity and less need for secondary finishing. Which toolholders are compatible with this insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; holders designed for ISO rhombic CCGT inserts and the size 09 platform will be suitable. Can this insert handle interrupted cuts? As a finishing-grade insert optimised for continuous cuts and small depths of cut, the CCGT09T301 NS9530 is not primarily intended for heavy interrupted cuts; application-specific tests are recommended for non-continuous machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH7025 Wendeplatten - Tungaloy
Take advantage of robust performance and consistent edge life through the combination of a tough SH7025 coating and ISO-compliant geometry; order directly via Metav Werkzeuge or consult the team for application-specific advice. CCGT 09T301 SH7025 ISO turning insert for turning — Tungaloy The CCGT09T301 SH7025 is an ISO rhombic turning insert designed for external and internal turning where stable edge life and reliable chip control are required Coated carbide grade SH7025 80° rhombic ISO geometry Corner radius 0.1 mm One-sided chipbreaker design Productive edge life for versatile turning The insert combines a coated carbide substrate with the SH7025 grade, delivering a balance of toughness and cutting-edge stability that is particularly effective in variable engagement conditions and smaller toolholders. The result is a reduced risk of premature edge failure and fewer index changes during series production. This performance translates into measurable productivity gains where consistent surface finish and repeatable tool life are priorities, especially in mixed-batch or job-shop environments. Predictable geometry and secure mounting for consistent results ISO standardisation ensures reliable compatibility with matched toolholders: the rhombic form with an 80° included angle gives predictable cutting forces and accessibility in turning ports, while the cylindrical hole with single-side countersink (40°–60°) secures the insert against rotation. The clearance angle 7° and 3.97 mm thickness support stable clamping and contribute to vibration damping. Compatibility to a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness, so choosing the correctly matched clamping set and screw is essential for repeatable precision. Practical machining advantages and straightforward selection A one-sided chipbreaker is tuned for general turning tasks, aiding chip control across a range of cut depths and feeds. The small 0.1 mm corner radius supports fine finishing passes and dimensional control when tighter tolerances are required. Given the ISO designation and the insert’s mechanical characteristics, the component suits both external and internal turning routines where indexable inserts are preferred for quick replacement and cost-effective tool management. Selection of chipbreaker and grade should match the workpiece material and machining stability to achieve optimal results. For application-specific selection of Tungaloy turning inserts or to place an order, contact Metav Werkzeuge for professional advice and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967406 Manufacturer SKU: TUN6967406 SKU: 6967406-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Name: CCGT09T301 SH7025 Tungaloy insert Facts Corner radius: 0.1 mm Insert angle: 80° Clearance angle: 7° Thickness: 3.97 mm Insert size: 09 Special features Grade: SH7025 coating Substrate: coated carbide Shape: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) ISO-compliant geometry and dimensions FAQ What materials is this insert intended for? The CCGT09T301 SH7025 insert is a coated carbide grade designed for versatile turning; selection of chipbreaker and cutting parameters should be matched to the specific workpiece material. How is the insert secured to the holder? The insert features a cylindrical hole with a single-side countersink (40°–60°); secure clamping requires the correct screw and support plate matched to the ISO rhombic form and thickness. What does the SH7025 grade offer in daily use? SH7025 provides a tough, edge-stable coating that is effective under varying engagement conditions and in smaller tool assemblies, improving tool life and process reliability. Is the geometry suitable for finishing passes? Yes, the 0.1 mm corner radius and one-sided chipbreaker enable controlled finishing cuts and improved surface quality when used with appropriate feeds and speeds. Can the insert be used for internal turning as well as external turning? The ISO rhombic shape and 80° angle allow use in both external and internal turning operations where holder access permits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a coated cemented carbide SH7025 grade, a 0.1 mm corner radius and ISO compatibility to achieve stable cutting edges and consistent turning results; order through Metav Werkzeuge or consult the team for application guidance. CCGT09T301 SH7025 ISO turning indexable insert — coated carbide, 0.1 mm radius (Tungaloy) A CCGT09T301 SH7025 indexable insert engineered for precision external and internal turning in ISO tool systems, offering a tough, edge-stable grade for variable engagement conditions. Coated cemented carbide SH7025 80° rhombic geometry for versatile turning 0.1 mm corner radius for fine profile work Cylindrical hole with 40°–60° countersink Stable chip control for predictable cycle times The insert’s single-sided chipbreaker and defined cutting-edge geometry deliver improved chip formation and evacuation during turning operations. The SH7025 grade is a tough, edge-stable coated carbide, designed to maintain a sharp cutting edge under fluctuating engagement depths; this reduces unexpected tool changes and helps to keep cycle times consistent. For machinists seeking predictable metal removal rates, the combination of chip control and material behaviour translates into fewer interruptions and steadier production output. Edge security and small-tool reliability A 0.1 mm corner radius offers a balance between edge strength and profile accuracy, particularly valuable when using compact toolholders or when cutting conditions vary. The insert’s 80° rhombic shape spreads cutting forces and supports stability in both external and internal turning. In practice, a small corner radius limits vibration and prolongs edge life while preserving the ability to produce fine contours, making this geometry suitable for components that demand repeatable dimensional tolerance and surface quality. Easy integration into ISO systems and secure clamping The insert conforms to ISO indexable insert conventions, so compatibility with holders is determined by form, clearance angle, tolerance class, mounting and thickness. The centre cylindrical hole with a single-side countersink (40°–60°) ensures reliable positioning and repeatable clamping when paired with the correct screw and clamp system. The nominal thickness of 3.97 mm and rhombic plate form facilitate straightforward replacement routines and reduce set-up time when switching inserts in multi-station toolposts. Material suitability and practical selection guidance The SH7025 coating and substrate combination is optimised for turning across a broad range of steels and alloyed materials where a tough, wear-resistant edge is required. The insert is particularly recommended for small tools and operations with varying engagement; for customers less familiar with cutting grades, coated carbide signifies a wear-resistant surface layer that extends life and improves fracture resistance. Selecting the right chipbreaker and matching the grade to the workpiece material yields measurable improvements in tool life and surface finish. Contact Metav Werkzeuge for tailored application advice and fast supply of Tungaloy indexable inserts, including the CCGT09T301 SH7025 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967447 Manufacturer SKU: TUN6967447 SKU: 6967447-Tungaloy Brand: Tungaloy Facts Thickness: 3.97 mm Corner radius: 0.1 mm Clearance angle: 7° Main geometry angle: 80° Size: 09 Hole: cylindrical hole + one-side countersink 40°–60° Special features Coated cemented carbide (SH7025) Single-sided chipbreaker ISO-standard indexable insert Rhombic plate form For external and internal turning Compatibility determined by form, clearance, tolerance, mounting and thickness FAQ What materials is this insert suitable for? The CCGT09T301 SH7025 insert is a coated cemented carbide grade optimised for a wide range of steels and alloyed materials, offering good edge stability under variable engagement. How does the 0.1 mm corner radius affect performance? A 0.1 mm corner radius increases edge strength and reduces chipping risk while still allowing fine profile turning; the result is improved tool life and consistent surface finish. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO indexable insert conventions; compatibility depends on holder form, clearance angle, tolerance class, mounting and thickness. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with a one-side countersink (40°–60°) provides secure, repeatable clamping and accurate seat positioning when used with the appropriate screw and clamp assembly. Which feature makes SH7025 suitable for small-tool applications? The SH7025 grade combines toughness and cutting-edge stability, which is particularly beneficial when using smaller toolholders or when engagement conditions change frequently. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of a tough, coated carbide grade (SH7025), a 0.1 mm corner radius and ISO compatibility to achieve stable cutting performance and predictable tool life in turning operations. Order the insert directly via Metav Werkzeuge or consult the technical advisors for process alignment and holder compatibility. CCGT09T301 SH7025 – ISO turning insert, coated carbide, 0.1 mm radius | Tungaloy A CCGT09T301 SH7025 indexable turning insert engineered for external and internal turning, designed to deliver edge stability under varying engagement conditions. Coated carbide grade SH7025 for toughness ISO CCGT profile with 80° rhombic shape 0.1 mm corner radius for fine turning Cylindrical hole with single-sided countersink Stable cutting and edge performance for productive turning The coated cemented carbide grade SH7025 is formulated for edge stability and reliable wear behaviour, particularly beneficial when using smaller tools or when insert engagement varies. As a result, operators can expect more consistent tool life and fewer unscheduled indexings, which supports continuous production runs. The insert’s combination of a robust coating and substrate reduces the tendency for edge chipping while maintaining acceptable fracture resistance, improving overall process stability. Precise fit and compatibility reduce set-up variability Designed to the ISO geometry series, the insert’s 80° rhombic shape and 7° relief angle ensure compatibility with a broad range of ISO toolholders; however, correct matching depends on form, relief angle, tolerance class, clamping method, size and thickness. The 3.97 mm plate thickness and the standard ISO designation facilitate interchangeability in established systems. Specifying the correct holder and clamping components minimises runout and ensures repeatable seating, translating into improved dimensional accuracy on turned parts. Controlled chips and improved surface finish with focused geometry The single-sided chipbreaker works together with the insert’s geometry to direct chips consistently away from the cutting zone, aiding evacuation and reducing re-cutting. Combined with the 0.1 mm corner radius, this leads to finer surface finishes on profiles where small radii are required and helps maintain form accuracy on shoulders and external contours. For internal turning, the same geometry supports predictable contact conditions and straightforward chip flow in limited-clearance applications. System-level benefits and practical considerations for the workshop The insert is intended to be used as part of a complete system: ISO insert, suitable external holder or boring bar, backing/ clamp set and replacement screws. Choosing the correct chipbreaker and grade for the workpiece material and machining stability is essential; matching these elements reduces downtime and simplifies tool management. Where switching between materials or variable engagement occurs, selecting this grade and the appropriate chip control option helps to standardise process parameters and improve first-pass yield. Contact Metav Werkzeuge today to discuss the suitability of the Tungaloy CCGT09T301 SH7025 insert for specific turning applications and to request detailed compatibility guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a technical consultant Technical data Article number: 6967377 SKU: 6967377-Tungaloy Manufacturer SKU: TUN6967377 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Grade: SH7025 Application: Turning Facts Insert size: 09 Corner radius: 0.1 mm Relief angle: 7° Plate thickness: 3.97 mm Shape angle: 80° Special features ISO designation: CCGT09T301 Coating/grade: SH7025 Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Plate form: rhombic Typical system: insert + holder/boring bar + backing/clamp set + screws FAQ What toolholders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, clamping and size; the CCGT09T301 SH7025 follows ISO geometry and fits standard CCGT-compatible holders when those parameters match. Which materials can be machined with this grade? The SH7025 coated cemented carbide is intended for a broad material range and offers good edge stability for general turning; choose the chipbreaker and cutting data according to the specific material and hardness. Is this insert suitable for both external and internal turning? Yes, the rhombic geometry and 0.1 mm corner radius of the CCGT09T301 make it appropriate for both external and internal turning tasks, provided the holder and bar clearance are adequate. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert aids chip control and evacuation, improving surface finish and reducing the risk of chip re-cutting during interrupted or varying-engagement cuts. What distinguishes the SH7025 grade for workshop use? The SH7025 grade emphasises toughness and cutting-edge stability, which is particularly useful for smaller tools and applications with changing engagement conditions where fracture resistance is critical. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH725 Wendeplatten - Tungaloy
Benefit from the combination of coated carbide SH725 and a precise 0.1 mm corner radius for stable cutting and extended edge life; the rhombic ISO geometry with 7° clearance ensures predictable engagement. Order the insert directly via Metav Werkzeuge or contact their consultants for application advice. CCGT09T301 SH725 Tungaloy rhombic turning insert for turning applications, 7° clearance The CCGT09T301 SH725 is an ISO-format rhombic turning insert designed for external and internal turning, offering a robust, edge-stable carbide grade for variable engagement conditions. ISO rhombic insert CCGT09T301 Coated carbide grade SH725 Single-sided chipbreaker design 3.97 mm thickness, 7° clearance Stable performance through a tough coated grade The rhombic insert combines an SH725 coated carbide body with an optimised chipbreaking geometry to deliver consistent cutting behaviour under changing conditions. The coating provides toughness and edge stability, which reduces the risk of chipping when small tools or variable depths of cut are used. With the 0.1 mm corner radius and rhombic outline, the geometry supports reliable load distribution at the cutting edge, leading to predictable wear progression and fewer unplanned tool changes. Predictable chip control and improved productivity A single-sided chipbreaker on the insert promotes controlled chip formation for turning operations, helping to avoid long, tangled swarf and easing downstream handling. The 80° approach-angle and the 7° clearance work together to reduce rubbing and minimise built-up edge, so cutting efficiency is improved and surface quality becomes more consistent. These characteristics make the solution particularly suited to short-turning cycles and applications where repeatability is essential. Designed for straightforward system integration The insert follows ISO standard dimensions and mounting features, so compatibility with holders depends on form, clearance angle, tolerance class, fastening, size and thickness. The system set-up typically comprises an ISO insert, a suitable external holder or boring bar, an underlay/clamping set and replacement screws. The 3.97 mm plate thickness and the insert’s hole style — a cylindrical hole with a single-sided countersink (40°–60°) — ensure secure clamping and correct seating in standard toolholders. Application suitability and process stability Developed for turning tasks with variable engagement, the grade is a pragmatic choice where edge stability and process reliability are prioritised. The design supports operators who require consistent surface finish without frequent index changes, and the insert’s geometry helps maintain stable cutting forces across a range of commonly encountered turning conditions. Backed by Tungaloy’s manufacturing standards, the insert offers a reliable baseline for productive machining cycles. Contact Metav Werkzeuge today to discuss how the CCGT09T301 SH725 insert can be integrated into existing tool systems or to request detailed cutting-data recommendations from their technical team Technical data Article number: 6838676 Manufacturer SKU: TUN6838676 Model series: ISO-Drehwendeschneidplatten Designation: CCGT09T301 SH725 Material: carbide Plate shape: rhombic Core data Thickness: 3.97 mm Corner radius: 0.1 mm Relief angle: 7° Approach angle: 80° Size: 09 Special features Coating / grade: SH725 (coated carbide) Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (external and internal) System requirements: insert + suitable holder / boring bar + underlay/clamping set + replacement screws FAQ What turning operations is this insert intended for? The CCGT09T301 SH725 insert is intended for external and internal turning operations where a rhombic ISO insert with a single-sided chipbreaker and 7° clearance provides process stability. Which materials are best suited to this grade and geometry? The SH725 coated carbide grade is formulated for applications requiring edge stability and toughness; it is particularly effective when variable engagement or smaller tooling increases the risk of edge chipping. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) and a standard clamping arrangement; correct holder selection must consider form, tolerance class, fastening and plate thickness. What advantages does the 0.1 mm corner radius offer? A 0.1 mm corner radius provides a compromise between sharpness and robustness: it reduces the likelihood of edge chipping while allowing good surface finish and dimensional control in finishing passes. Is this an ISO-standard insert and how does that help? Yes, the insert follows ISO conventions for shape and size (CCGT09T301), which simplifies compatibility assessment with standard holders and supports predictable replacement and inventory management. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide composition and the SH725 grade for stable edge life and consistent chip control; the 0.1 mm corner radius and 80° rhombic form support precise profiling and versatile turning tasks. For stock and application advice, order the Tungaloy CCGT09T301 directly via Metav Werkzeuge or consult the specialists if clarification is required. CCGT09T301 SH725 ISO turning indexable insert — 0.1 mm radius, 80° rhombic form by Tungaloy The CCGT09T301 SH725 is an ISO-standard rhombic indexable insert designed for external and internal turning, engineered to perform under variable engagement conditions and in compact tooling arrangements. Coated carbide grade SH725 for tough cuts 0.1 mm corner radius for fine profiling 80° rhombic form for versatile turning Cylindrical hole with one-sided countersink Enhanced precision and consistent cutting performance The insert’s coated carbide composition and SH725 designation deliver a balance between toughness and wear resistance, which promotes stable chip formation under changing depths of cut. The small 0.1 mm corner radius increases profile accuracy while reducing cutting forces during finishing and light roughing operations. As an ISO-standard component, the insert integrates into common toolholding systems to maintain repeatable results and minimise unexpected setup time, supporting higher overall productivity. Simple compatibility and secure clamping for quick changeover Compatibility is defined by insert geometry: 80° rhombic form, 7° clearance angle, and the insert thickness of 3.97 mm. The central cylindrical hole with a one-sided countersink (40°–60°) enables positive clamping and reproducible seating in holders and boring bars. The system consists of the ISO insert, a corresponding external holder or boring bar, a support/locking set plus replacement screws. Correct matching of form, clearance, tolerance class, fixation and size ensures secure clamping and minimises vibration-related wear. Material behaviour and the benefit of the SH725 grade The coated carbide substrate provides thermal and abrasive resistance; the SH725 grade is formulated for edge stability in turning, especially where smaller tooling or varying engagement angles are present. This combination reduces flank wear and improves life expectancy of the cutting edge under interrupted cuts. The benefit for operations is predictable tool life and fewer index changes, which contributes to reduced machining costs and steadier production output. Practical selection and chip control for reliable results The insert features a one-sided chipbreaker suited to controlled chip evacuation in many turning scenarios. Selection of the chipbreaker style and matching grade should be performed according to material machinability and expected depth of cut to achieve optimal surface finish and cycle times. In less rigid setups, favour conservative feeds and ensure the holder assembly is rigid; in stable fixtures the grade’s toughness allows more aggressive parameters while maintaining edge integrity and consistent part geometry. For tailored application advice on the SH725 grade or to reserve the Tungaloy CCGT09T301, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 6737131 Manufacturer SKU: TUN6737131 SKU: 6737131-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Designation: CCGT09T301 Facts Corner radius: 0.1 mm Insert size: 09 Clearance angle: 7° Insert angle: 80° Thickness: 3.97 mm Special features Coated carbide grade SH725 Rhombic insert shape One-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) For external and internal turning Compatible with appropriate holders, clamps and screws FAQ What materials is this insert designed for? The CCGT09T301 SH725 turning insert is a coated carbide grade optimised for stable edge performance; material-specific recommendations depend on workpiece machinability and should be selected in line with the SH725 characteristics. How is the insert clamped in the holder? Clamping uses the central cylindrical hole with a one-sided countersink (40°–60°); correct seating with the matched holder and torque on the replacement screws ensures repeatable, vibration-resistant fixation. What does the 0.1 mm corner radius affect in machining? A 0.1 mm corner radius provides finer profile definition and lowers cutting forces for finishing passes while offering adequate strength for light roughing compared with very small radii. Is the insert suitable for internal turning? Yes, the rhombic 80° form and the insert’s geometry make it suitable for both external and internal turning when paired with the appropriate boring bar or holder. Which SKU identifies this item for reordering? The item is listed as SKU 6737131-Tungaloy and the manufacturer SKU is TUN6737131 for ordering and inventory reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, a 0.1 mm nose radius and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for fit and availability. CCGT09T301 SH725 — ISO indexable turning insert, 0.1 mm nose radius (Tungaloy) The CCGT09T301 SH725 is an ISO-standard rhombic indexable insert designed for precision turning and variable engagement conditions in general machining applications. Rhombic ISO insert CCGT09T301 SH725 Coated carbide grade SH725 for tough edges 0.1 mm nose radius for fine finishing Cylindrical hole with single-side countersink Reliable geometry and consistent results for turning operations The rhombic geometry combined with the ISO-standard designation ensures predictable seating and repeatable performance in a wide range of toolholders. The combination of the 0.1 mm nose radius and a defined cutting angle offers improved surface finish on external and internal turning tasks while maintaining dimensional control. Compatibility to the holder is determined by form, clearance angle and tolerance class, so the insert fits into standardised tool systems for straightforward replacement and reduced setup times. This design supports steady production flows by lowering variability between tool changes. Coating and grade engineered for edge stability under changing conditions The insert is manufactured from coated carbide in the SH725 grade, a formulation developed for edge toughness and resistance to chipping during interrupted cuts or fluctuating engagement. The single-sided chipbreaker aids chip control when machining a variety of materials, while the coating improves wear resistance and can extend effective tool life in mixed-production environments. For shops facing diverse workpieces, the grade and coating combination reduces the need for frequent sort changes and helps keep machining cycles economical. Mounting features, measurements and practical application guidance Mounting is facilitated by the cylindrical hole with a single-side countersink (40°–60°) which secures the insert reliably in appropriate clamping sets; this ensures correct seat and clamp force distribution. Key dimensions such as 3.97 mm thickness, the 7° clearance angle and the standard 09 size make the insert suitable for many common turning holders and boring bars. Select the matching chipbreaker and grade according to workpiece material and process stability to achieve the best balance between surface quality and tool life. Contact Metav Werkzeuge for tailored technical advice and stock enquiries on the Tungaloy CCGT09T301 SH725 indexable turning insert and to confirm holder compatibility Technical data Article number: 6737004 Manufacturer SKU: TUN6737004 Label: CCGT09T301 SH725 Tungaloy-insert Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: SH725 Facts Nose radius: 0.1 mm Included angle: 80° Clearance angle: 7° Thickness: 3.97 mm Size: 09 Special features Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard indexable insert Application: turning Compatibility determined by form, clearance angle and tolerance class FAQ What materials is this insert suitable for? The CCGT09T301 SH725 insert is a coated carbide grade optimised for a broad material range; selection of the chipbreaker and cutting data should be matched to the specific workpiece material. How does the SH725 grade benefit interrupted cuts? SH725 provides enhanced edge toughness and chipping resistance, so the CCGT09T301 SH725 keeps a stable cutting edge under variable engagement and interrupted turning. Which holder features are required for correct seating? A compatible holder must match the insert form, clearance angle and tolerance class; the CCGT09T301 has a cylindrical hole with a single-side countersink for secure clamping. Is the insert suitable for internal and external turning? Yes, the rhombic geometry and 0.1 mm nose radius make the insert appropriate for both external and internal turning when used with the correct holder and cutting parameters. Can this insert be used for fine finishing operations? The small nose radius and coated carbide construction support fine finishing; optimise feed and speed to achieve the required surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725, precise 80° rhombic geometry and a secure mounting design for reliable turning performance and reduced downtime; order directly via Metav Werkzeuge or consult our specialists for application support. CCGT 09T301 SH725 CCGT09T301 Tungaloy — indexable turning insert (Turning) The CCGT09T301 SH725 is a coated carbide indexable insert for turning, designed in a rhombic 80° form with a 0.1 mm corner radius and a 7° relief angle to suit a wide range of holders and turning applications. ISO‑standard CCGT form for wide holder range Coated carbide grade SH725 for edge stability Rhombic 80° shape with 0.1 mm corner radius Cylindrical hole with 40°–60° countersink Increased process reliability through a tough coated grade The CCGT09T301 SH725 insert uses a coated carbide substrate and the SH725 grade, which is engineered for edge stability and consistent chip control. That material combination reduces unexpected edge breakage when engagement conditions vary, so machining cycles run with fewer interruptions. For small tools or operations with fluctuating depths of cut, the tougher grade helps to extend tool life and maintain repeatable component quality, translating directly into increased machine uptime and predictable batch costs. Precise geometry for consistent surface finish and repeatability The insert’s 80° rhombic shape together with a 0.1 mm corner radius and a 7° relief angle is designed to balance strength and surface finish. The geometry reduces radial cutting forces and supports steady cutting action, which improves dimensional accuracy on shafts and external profiles. The 3.97 mm thickness and the cylindrical hole with single‑side countersink (40°–60°) ensure secure seating and stable clamping in compatible holders, so runout and vibration are minimised for better finishes and longer clamp life. Easy system integration and clear selection criteria As an ISO-standard turning insert, the plate is compatible where form, relief angle, tolerance class, fastening, size and thickness match the holder. The one-sided chipbreaker supports predictable chip formation for a range of steels and general-purpose applications; matching the chipbreaker and grade to the workpiece material will optimise cutting forces and surface quality. For shop-floor users the logical system setup — insert, suitable external holder or boring bar, shim and clamp set plus replacement screws — simplifies inventory and speeds changeovers. For tailored recommendations on Tungaloy turning solutions and fast delivery, contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737003 SKU: 6737003-Tungaloy Manufacturer SKU: TUN6737003 Model series: ISO-Drehwendeschneidplatten Designation: CCGT09T301 SH725 Tungaloy indexable insert Numbers / Core specifications Size code: 09 Included angle: 80° Corner radius: 0.1 mm Plate thickness: 3.97 mm Relief angle: 7° Hole style: cylindrical hole with single‑side countersink (40°–60°) Design & features Material: carbide (Hartmetall) Grade / coating: SH725, coated carbide Plate form: rhombic Chipbreaker: one‑sided Mounting: with hole and single‑side countersink Application: turning System compatibility: ISO turning inserts; suitable holders, shims and screws FAQ What materials is this insert best suited for? The SH725 grade of this CCGT09T301 indexable insert (Tungaloy, SKU 6737003-Tungaloy) is designed for general turning where edge stability and versatility are required; it performs well on a broad range of steels and mixed production batches. How does the 0.1 mm corner radius affect machining? A 0.1 mm corner radius gives a compromise between strong cutting edge and good surface finish, making the insert suitable for finishing and light to medium turning duties with improved dimensional consistency. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO CCGT form and the 3.97 mm thickness allow fitting in standard external holders and boring bars designed for CCGT inserts. What role does the one‑sided chipbreaker play? The one‑sided chipbreaker promotes controlled chip formation for a range of common turning tasks; pairing the chipbreaker with the SH725 grade helps maintain chip control and reduce rework in many production scenarios. Is the insert suitable for interrupted cuts or unstable engagements? The SH725 coating and the rhombic 80° geometry provide enhanced edge stability compared with more brittle grades, improving resistance to shock in varying engagement conditions; however, selection should be confirmed for specific interrupted‑cut parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 SH730 Wendeplatten - Tungaloy
Choose a robust, ISO-indexed solution that combines coated carbide SH730 with a fine 0.1 mm corner radius and an 80° rhombic geometry for stable, repeatable turning performance; order the CCGT09T301 SH730 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 09T301 SH730 indexable turning insert, coated carbide, 0.1 mm radius — Tungaloy CCGT09T301 SH730 is an ISO-specified rhombic indexable insert designed for external and internal turning, offering a tough, edge-stable coated carbide grade for variable engagement and small-tool applications Coated carbide grade SH730 Rhombic 80° form for general turning Corner radius 0.1 mm for fine finishing Cylindrical hole with 40°–60° countersink Precise cutting performance with a tough coated grade The insert combines a coated carbide substrate with the SH730 grade to deliver improved edge stability in demanding turning tasks. The coating enhances wear resistance while the substrate toughness reduces chipping under interrupted cuts or variable engagement. As an ISO indexable insert, it is manufactured to standardised form and tolerance classes so that its mechanical interaction with a matching holder—considering form, relief angle and thickness—is predictable. This results in consistent part quality and fewer index changes during serial production, supporting leaner tool management and higher machine uptime. Simplified mounting and selection for reliable clamping Mounting is straightforward thanks to the cylindrical hole with single-sided countersink (40°–60°), which permits reliable clamping with standard screws and underplates. The insert’s 3.97 mm thickness and 7° relief angle ensure a secure fit in compatible holders; compatibility is determined by the insert’s form, clearance angle, tolerance class, fixation method and size. For best results, pair the insert with a suitable external holder or drill bar and the correct clamp set and replacement screws included in a typical system build. Selecting the appropriate one-sided chipbreaker and matching grade to the workpiece and machining stability will secure optimal chip control and surface finish. Application-focused benefits that support production goals Engineered for both external and internal turning, this rhombic insert emphasises process reliability and predictability. The 0.1 mm corner radius produces fine edge geometry for controllable cutting forces and improved surface integrity in finishing passes, while the 80° included angle offers a balanced approach between strength and accessibility. This combination supports shorter cycle times through fewer tool changes and helps maintain part tolerances in mixed-operation shops. Where small tools or fluctuating depths of cut are common, the SH730 composition provides the compromise between toughness and wear resistance needed for productive machining. Contact Metav Werkzeuge to discuss the CCGT 09T301 SH730 insert, request matching holders or receive application-specific recommendations from our technical advisors Technical data Article number: 6854005 SKU: 6854005-Tungaloy Manufacturer SKU: TUN6854005 Model series: ISO turning inserts Designation: CCGT09T301 SH730 Tungaloy insert Core dimensions Size designation: 09 Thickness: 3.97 mm Relief angle: 7° Included angle: 80° Corner radius: 0.1 mm Design & features Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) Coated carbide grade SH730 One-sided chipbreaker For external and internal turning ISO indexable insert FAQ What holders are compatible with this insert? Compatibility is determined by the insert’s form, relief angle and thickness; the CCGT09T301 SH730 indexable insert (Tungaloy, SKU 6854005-Tungaloy) requires a holder matching the rhombic form, 7° relief and 3.97 mm plate thickness for correct clamping. Which turning operations suit this grade and geometry? The SH730 grade and 80° rhombic geometry are intended for general external and internal turning where edge stability and versatile engagement are required; the CCGT09T301 SH730 insert performs well in finishing and light to moderate roughing tasks. How should the insert be clamped and secured? Use a compatible underplate and clamp set with a matching screw size; the cylindrical hole with a single-sided countersink (40°–60°) on the CCGT09T301 SH730 insert ensures repeatable centring and reliable screw seating when tightened to the holder’s recommended torque. What does the one-sided chipbreaker provide? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation for most turning conditions; when combined with the SH730 toughness, it helps maintain consistent surface finish and reduces the risk of built-up edge on the cutting edge. What tolerance and standards apply to this insert? The insert conforms to ISO indexable insert standards for form and tolerance, ensuring interchangeability with ISO-specified holders; reference the designation CCGT09T301 SH730 for ordering and tool matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a TH10 uncoated carbide grade and a precise 0.1 mm corner radius for efficient, low‑force turning and consistent surface finish; order the insert directly via Metav Werkzeuge or consult our technical advisors for application advice. CCGT 09T301 TH10 rhombic turning insert by Tungaloy — ISO turning insert, 0.1 mm radius, with hole The CCGT09T301 TH10 is an ISO‑standard rhombic insert designed for external and internal turning, offering a sharp, uncoated carbide cutting edge optimised for non‑ferrous materials and applications requiring low cutting forces ISO‑standard rhombic insert for turning TH10 uncoated carbide for non‑ferrous materials 0.1 mm corner radius for precise finishes Cylindrical hole with single‑side countersink Increased productivity through sharp, low‑force cutting The combination of the TH10 grade and uncoated carbide provides a cutting edge that promotes low cutting forces and clean surface finishes when machining softer, non‑ferrous materials. This results in reduced spindle load and shorter cycle times for operations where minimised cutting resistance is essential. The ISO conformity also reduces setup time by ensuring predictable seating and orientation in common clamping systems. The principal benefit here is enhanced throughput with reliable surface quality. Predictable surface finish and tool life from controlled geometry A 0.1 mm corner radius paired with a 7° relief angle and the rhombic geometry delivers consistent engagement with the workpiece, reducing the risk of chatter and minimising distortion at the cut edge. The single‑sided chipbreaker helps to control chip shape in typical turning conditions, improving surface finish and easing chip evacuation. The direct benefit is greater dimensional stability and repeatability across medium‑run production, especially when frequent insert indexing is required. Simple mounting and secure clamping for less downtime Built as an ISO‑compatible insert with a cylindrical hole and single‑side countersink, the design ensures straightforward clamping in matched holders and stable seating during heavy and light cuts alike. Compatibility depends on form, relief angle, tolerance class, fixing and thickness, so using standardised holders and replacement screws in a consistent system reduces setup errors and machine downtime. The practical advantage is faster changeovers and more predictable fixture behaviour. Application guidance for reliable results This indexable insert is optimised for general turning of non‑ferrous alloys and situations where a sharp, uncoated cutting edge improves finish or reduces cutting forces. The insert performs best in external and internal turning when paired with a holder that matches the plate form and tolerance class. For mixed material shops, select the chipbreaker and grade according to workpiece stability and desired surface. The CCGT09T301 should be replaced or re‑indexed at the first signs of edge chipping or progressive wear to maintain part quality and process stability. Contact Metav Werkzeuge for tailored application support or order the Tungaloy CCGT09T301 via Metav Werkzeuge — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: 6801313 SKU: 6801313-Tungaloy Manufacturer SKU: TUN6801313 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Facts Corner radius: 0.1 mm Plate thickness: 3.97 mm Plate size: 09 Relief angle: 7° Insert angle: 80° Special features ISO turning insert, rhombic form Grade: TH10 (uncoated) Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) With hole for stable clamping FAQ What materials is this insert suited for? The TH10 uncoated carbide grade of the CCGT09T301 insert is intended primarily for non‑ferrous materials and applications where a sharp, low‑force cutting edge yields the best surface finish. Can this insert be used for both external and internal turning? Yes; the insert is designed for both external and internal turning operations when mounted in a compatible ISO holder matched by form, size and tolerance. How does the 0.1 mm corner radius affect the finish? A 0.1 mm corner radius gives a fine, consistent finish while maintaining edge strength; this reduces the likelihood of small burrs on softer materials and improves dimensional accuracy. What does the hole and countersink style mean for clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures central and secure clamping in compatible holder designs, improving repeatability and reducing the risk of insert movement under load. Is the insert coated, and what does that imply for cutting conditions? This insert is uncoated (TH10) which supports a very sharp cutting edge; it is best used where low cutting forces and clean surfaces are required rather than high‑temperature or heavy interrupted cuts. How should wear be monitored for this insert? Monitor for edge chipping, increased cutting forces or deteriorating surface finish; index or replace the insert at the first signs of progressive wear to maintain process stability and part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T301 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO‑compliant geometry and the sharp, uncoated carbide grade TH10 to achieve low cutting forces and clean surface finishes in turning operations; order the inserts directly via Metav Werkzeuge or consult our specialists for compatibility and stock information. CCGT 09T301 TH10 – ISO turning insert by Tungaloy for precise external and internal turning The CCGT09T301 TH10 is an ISO‑standard rhombic turning insert designed for external and internal turning of non‑ferrous materials, offering a sharp uncoated cutting edge and consistent chip control. ISO‑standard rhombic insert for turning Uncoated cemented carbide, grade TH10 Sharp universal grade for non‑ferrous materials 0.1 mm corner radius for fine finishing Reliable fit and predictable machining with ISO compatibility The rhombic insert follows the ISO‑standard geometry, so compatibility with standard holders is defined by form, clearance angle, tolerance class, attachment method, size and thickness. This standardisation reduces setup time and enables predictable machining results across different clamping systems. The combination of consistent geometry and defined tolerances supports repeatable part quality and simplifies tool inventory management, making integration into existing turning centres straightforward. Lower cutting forces and cleaner surfaces for non‑ferrous work The uncoated, sharp universal grade TH10 is formulated for applications where a low‑force cutting edge and excellent surface condition are required. In practice, this means improved performance when machining aluminium, copper and similar alloys: chip formation remains stable and the tendency for built‑up edge is reduced, resulting in low cutting forces and a clean surface finish. The single‑sided chipbreaker promotes predictable chip flow, which supports uninterrupted production and reduces rework. Fine finishing and dimensional control from precise edge geometry A small corner radius of 0.1 mm combined with a 7° clearance angle and an 80° included angle offers fine finishing capability and good edge strength for accurate profile turning. The insert thickness of 3.97 mm and the rhombic form contribute to secure seat and rigidity in the holder, while the hole with cylindrical bore and one‑sided countersink (40°–60°) ensures reliable clamping. These geometric details translate directly into better surface integrity and closer adherence to dimensional tolerances on worked components. For production queries or application advice regarding the Tungaloy CCGT09T301 TH10, contact Metav Werkzeuge for technical guidance and current availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801316 SKU: 6801316-Tungaloy Manufacturer SKU: TUN6801316 Facts Designation: CCGT09T301 Model series: ISO‑Drehwendeschneidplatten (ISO turning inserts) Material: cemented carbide Grade: TH10 Size: 09 Thickness: 3.97 mm Special features Plate form: rhombic Corner radius: 0.1 mm Clearance angle: 7° Included angle: 80° Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided (single‑sided) Typical application: external and internal turning; select chipbreaker and grade for material and stability FAQ What materials is this insert best suited for? The CCGT09T301 TH10 by Tungaloy is optimised for non‑ferrous materials such as aluminium and copper alloys, where the uncoated carbide edge supports low cutting forces and clean surfaces. How does the TH10 grade affect machining? TH10 is an uncoated, sharp universal grade that reduces cutting forces and improves surface finish in applications requiring minimal built‑up edge; this makes the Tungaloy insert suitable for delicate finishing passes. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry and fits holders when form, clearance angle, tolerance class, fastening and size are matched; the rhombic shape and hole configuration provide secure clamping. What is the purpose of the small corner radius? A 0.1 mm corner radius gives finer surface finishes and better dimensional control on finishing passes while still providing sufficient edge strength for many turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T301 UM 1105 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCGT 09T301 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T301UM1105-SANDVIK Facts & Figures: ISO-Code: CCGT09T301 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.1 Features Material: cemented carbide Grade: 1105 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGT-09T301-1105-Sandvik 40END
CCGT 09T301 UM 1115 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications inserts CCGT 09T301 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T301UM1115-SANDVIK Facts for the tool: ISO-Code: CCGT09T301 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.1 Special features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-09T301-1115-Sandvik 40END
CCGT 09T301 UM 1125 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product details CCGT 09T301 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T301UM1125-SANDVIK Figures for the tool: ISO-Code: CCGT09T301 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.1 Features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-09T301-1125-Sandvik 40END
CCGT 09T301 UM 5015 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CCGT 09T301 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T301UM5015-SANDVIK Figures for the tool: ISO-Code: CCGT09T301 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.1 Special features Material: cemented carbide Grade: 5015 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-09T301-5015-Sandvik 40END
CCGT 09T302 -UM 1205 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Features inserts CCGT 09T302 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T302-UM1205-SANDVIK Facts & Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.2 Features Material: cemented carbide Grade: 1205 Chip Breaker: -UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-09T302-1205-Sandvik 40END
CCGT 09T302 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 carbide, a compact 0.2 mm corner radius and ISO compatibility to secure consistent component quality and reduced rework. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCGT09T302 AH725 — CCGT indexable insert for Turning (Tungaloy) The CCGT09T302 AH725 Tungaloy indexable insert is an ISO‑standard rhombic turning insert designed for external and internal turning applications where process reliability and consistent surface finish are required ISO-standard rhombic CCGT insert, 80° cutting angle PVD-coated grade AH725 for steel and rostfreier Stahl 0.2 mm corner radius for precise edge control Cylindrical hole with single-side countersink Reliable process security with a universal, PVD-coated grade The insert combines a PVD-coated surface and a carbide substrate to provide improved wear resistance and thermal stability during turning operations. Specified as grade AH725, this cutting grade is described as a universal, breakout-resistant option for machining steel and rostfreier Stahl, making it suitable where workpiece materials vary. The protective coating reduces flank wear and helps maintain cutting geometry, which in turn supports predictable tool life and stable cycle times on series production runs. Designed geometry for consistent finishes and edge control A 0.2 mm corner radius and an 80° cutting angle deliver a balance between strength and finish capability: the radius supports controlled chip formation and edge robustness, while the angle helps achieve good surface quality on external and internal profiles. The rhombic shape enables flexible approach angles; selecting the appropriate chipbreaker and mounting orientation allows effective management of cutting forces, reducing the risk of edge chipping and improving repeatability for precision turning tasks. Clear compatibility and mounting considerations for quick tool changes The insert follows ISO dimensions and fits systems that match on form, relief (7°), tolerance class, clamping and thickness. The central feature includes a cylindrical hole with a single-sided countersink (40°–60°) for secure fastening to the seat with standard screws and clamping kits. Specifying the correct holder and clamp set ensures repeatable seating and concentricity, which is essential for maintaining part tolerances and minimising set-up time in mixed-production environments. Practical selection advice and machining scope As a versatile turning solution, the grade is optimised for smaller tools and applications demanding high process reliability; choose the one-sided chipbreaker variant where chip control and disposal are critical. The insert’s universal character simplifies inventory and reduces tooling complexity across batches of different steels and rostfreier Stahl. For customers less familiar with PVD technology: the coating is a thin, bonded layer that increases surface hardness and heat resistance without altering the substrate toughness, combining long tool life with consistent results. Request genuine Tungaloy AH725 indexable inserts via Metav Werkzeuge for improved process security and consistent surface quality — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice Technical data Manufacturer article number: 6857013 SKU: 6857013-Tungaloy Manufacturer SKU: TUN6857013 Brand: Tungaloy Model series: ISO turning inserts Core specifications Size designation: 09 ISO code: 09T302 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Cutting angle: 80° Hole: with hole — cylindrical hole + single-side countersink (40°–60°) Materials & special features Material: carbide Grade/coating: AH725 (PVD-coated) Shape: rhombic Chipbreaker: one-sided Application: Turning — external and internal Compatibility determined by shape, relief, tolerance class, clamping, size and thickness FAQ What materials is this insert suited for? This insert, specified as AH725, is intended for machining steel and rostfreier Stahl and is optimised for varying workpiece materials where a universal grade is required. What is the edge radius and how does it affect finishing? The corner radius is 0.2 mm; this radius provides a compromise between edge strength and surface finish, supporting stable chip formation and consistent surface quality. How is the insert secured to the holder? The insert features a cylindrical hole with a single-side countersink (40°–60°) for standard clamping screws and is compatible with ISO‑standard holders that match form, relief, tolerance class, size and thickness. Which chipbreaker does this insert use and when should it be chosen? The insert is supplied with a one-sided chipbreaker; this is recommended when reliable chip control and evacuation are priorities, especially in interrupted cuts or where chip flow must be directed away from the workpiece. Is this an ISO-standard geometry and what does that imply? Yes — the designation CCGT09T302 indicates ISO‑standard geometry, which ensures interchangeability with holders and clamps designed for the same insert family and supports predictable tool set-up and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com