Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 09T304 Indexable Insert for Stainless Steel - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for CCGT 09T304 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT09T304-Stainless Dataand Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-09T304-Stainless Steel-MetavCUT 40END
CCGT 09T304 K313 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-K313-KENNAMETAL Facts for the tool: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: K313 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-K313-Kennametal 40END
CCGT 09T304 KC5010 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Specifications CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KC5010-KENNAMETAL Figures for the tool: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T304-KC5010-Kennametal 40END
CCGT 09T304 KC5010 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KC5010-KENNAMETAL ISO-Code: CCGT09T304 Grade: KC5010 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T304-KC5010-Kennametal 40END
CCGT 09T304 KC5025 Indexable Insert - Kennametal
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product specifications CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KC5025-KENNAMETAL Facts & Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KC5025-Kennametal 40END
CCGT 09T304 KC5025 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KC5025-KENNAMETAL Facts for the tool: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KC5025-Kennametal 40END
CCGT 09T304 KC5410 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KC5410-KENNAMETAL Facts for the tool: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KC5410 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KC5410-Kennametal 40END
CCGT 09T304 KC5410 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts CCGT 09T304 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KC5410-KENNAMETAL ISO-Code: CCGT09T304 Grade: KC5410 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T304-KC5410-Kennametal 40END
CCGT 09T304 KC730 Indexable Insert - Kennametal
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Specifications for CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KC730-KENNAMETAL ISO-Code: CCGT09T304 Grade: KC730 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T304-KC730-Kennametal 40END
CCGT 09T304 KC730 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts CCGT 09T304 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KC730-KENNAMETAL Facts & Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KC730-Kennametal 40END
CCGT 09T304 KCS10B Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KCS10B-KENNAMETAL Facts / Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T304-KCS10B-Kennametal 40END
CCGT 09T304 KCU10 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features indexable inserts CCGT 09T304 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KCU10-KENNAMETAL Facts / Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T304-KCU10-Kennametal 40END
CCGT 09T304 KCU10 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KCU10-KENNAMETAL ISO-Code: CCGT09T304 Grade: KCU10 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KCU10-Kennametal 40END
CCGT 09T304 KCU10B Indexable Insert - Kennametal
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us a sample insert or drawing by post Product details indexable inserts CCGT 09T304 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KCU10B-KENNAMETAL Dataand Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KCU10B-Kennametal 40END
CCGT 09T304 KCU10B Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304LF-KCU10B-KENNAMETAL Data & Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KCU10B-Kennametal 40END
CCGT 09T304 KCU25 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Performance features for indexable inserts CCGT 09T304 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T304HP-KCU25-KENNAMETAL Data & Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T304-KCU25-Kennametal 40END
CCGT 09T304 KS05F Wendeplatten - Tungaloy
Combining the KS05F wear-resistant grade with the precise 0.4 mm corner radius and ISO‑standard rhombic geometry results in consistent chip control and dependable surface quality for turning operations; order the insert directly via Metav Werkzeuge or consult their specialists for machining guidance. CCGT 09T304 KS05F — Tungaloy turning insert (ISO rhombic, 80°) CCGT 09T304 KS05F is an ISO‑standard rhombic indexable insert for external and internal turning, designed to balance wear resistance and edge stability ISO‑standard rhombic insert CCGT KS05F grade for wear resistance 0.4 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Consistent productivity through material and grade The combination of a Tungaloy carbide grade and the KS05F specification ensures reliable tool life under a broad range of turning conditions. The grade is formulated to balance wear resistance and toughness, which supports stable cutting over longer tool cycles and reduces unexpected downtime. By favouring a material mix that handles both interrupted and continuous cuts, the insert offers clear economic advantages: fewer indexings and more consistent component dimensions, translating into improved process efficiency and predictable output. Precision geometry for accurate surface results The rhombic shape with an included angle of 80° and a relief (free) angle of 7° gives predictable tool engagement and facilitates controlled chip flow. The 0.4 mm corner radius contributes to refined surface finishes without compromising edge strength, making the insert suitable for finishing passes as well as light roughing where a small radius is required. The plate thickness of 3.97 mm supports rigidity in the clamping zone, helping to maintain cut stability and repeatable part quality even under varying machining forces. Secure clamping and system compatibility This ISO indexable insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure fastening to compatible external holders or boring bars. Compatibility is determined by form, relief angle, tolerance class, fastening style, size and thickness, so matching the correct holder ensures maximum stability and repeatable seating. The single‑sided chipbreaker provides consistent chip control for many common steel and alloy turning tasks, simplifying process setup and reducing the need for constant parameter adjustments. Contact Metav Werkzeuge for application advice and availability of the Tungaloy KS05F turning insert; specialists at Metav Werkzeuge can recommend the optimal holder combination and cutting data for each machining task Technical data Article number: 6822275-Tungaloy Manufacturer article number: 6822275 Manufacturer SKU: TUN6822275 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: CCGT09T304 Size: 09 Included angle: 80° Relief angle: 7° Corner radius: 0.4 mm Thickness: 3.97 mm Special features Grade: KS05F (Tungaloy carbide) Shape: rhombic Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical use: external and internal turning System components: ISO insert, matching external holder or boring bar, clamp/support and replacement screws FAQ What materials is this insert suitable for? The CCGT09T304 KS05F insert from Tungaloy is optimised for a wide range of turning tasks and is particularly suitable for common steels and alloyed materials due to the KS05F carbide balance of wear resistance and toughness. How does the 0.4 mm corner radius affect finishing? A 0.4 mm corner radius on the Tungaloy indexable insert reduces edge stress while producing improved surface finish on finishing passes; it also helps to extend edge life compared with extremely small radii. Is the insert compatible with standard holders? The insert follows ISO geometry; compatibility depends on matching form, relief angle, tolerance class, fastening style, size and thickness. Using a holder specified for CCGT 09 inserts ensures correct seating and clamping stability. What does the cylindrical hole with countersink provide? The cylindrical hole with a single‑side countersink (40°–60°) secures the insert reliably in the pocket and helps to maintain repeatable positioning under machining loads. Can this insert be used for both roughing and finishing? Yes — the KS05F grade and the insert’s geometry make it versatile for light roughing and finishing operations, with the small corner radius favouring accurate finishes and the grade supporting wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 KT325 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCGT 09T304 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T30411-KT325-KENNAMETAL Data & Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: KT325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T304-KT325-Kennametal 40END
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Conflicting product information detected: the insert is described both as cemented carbide and as an uncoated cermet; please verify the technical specification before publication to ensure accuracy and consistency, as discrepancies in material descriptions can lead to misunderstandings or errors in usage, potentially affecting performance, customer satisfaction, and overall reliability of the product; it is essential to cross-check all details with the manufacturer or technical documentation to confirm whether the insert is indeed made of cemented carbide, which is known for its hardness and wear resistance, or if it is an uncoated cermet, which typically offers a balance of toughness and heat resistance, to avoid any confusion.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 finishing grade and the precise rhombic geometry for low cutting forces and superior surface quality; order the CCGT09T304 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T304 NS9530 turning insert for finishing (Turning) by Tungaloy A CCGT09T304 NS9530 indexable turning insert engineered for finishing operations on steel, offering low cutting forces and excellent surface integrity Finishing cermet NS9530 grade Sharp cutting edge for low forces Rhombic ISO shape CCGT 09, 80° 0.4 mm corner radius, 7° relief angle Consistent finishing and improved surface integrity The uncoated NS9530 cermet is a finishing grade developed to deliver high surface quality with minimal cutting forces. Its composition and sharp edge geometry reduce built-up edge formation and produce smoother part surfaces during continuous cutting conditions. For operations with small depths of cut, the grade helps maintain dimensional stability and reduces the need for subsequent polishing or rework, supporting a more efficient production flow. Precise geometry for reliable mounting and predictable results The rhombic CCGT form with an 80° included angle, a 0.4 mm corner radius and a 7° relief angle ensures consistent cutting conditions and predictable contact with the workpiece. The insert thickness of 3.97 mm and the cylindrical hole with a single-sided countersink (40°–60°) are designed for secure clamping in ISO-compatible holders. Compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness; this ensures repeatable results when the correct carrier is selected. Operational advantages and measurable productivity gains Using a finishing-grade cermet like NS9530 reduces cutting forces and helps achieve target surface finishes in fewer passes, which shortens cycle times and lowers unit cost. The one-sided chipbreaker is tailored for continuous cutting modes, improving chip control and contributing to process stability. Where surface finish and component tolerance matter, the combination of sharp edge geometry and a fine-grain cermet substrate offers a quantifiable reduction in downstream finishing effort. Application guidance and selection criteria Designed primarily for external and internal turning, the insert performs best in steady, uninterrupted cuts and modest depths of cut. Select a chipbreaker and grade that match the workpiece material and the machine-tool setup; the NS9530 sort is best suited for steels where a sharp edge and low cutting forces are required. For interrupted cuts or highly abrasive materials, consider alternative grades or coated variants suited to those conditions. Contact Metav Werkzeuge for technical advice and fast availability of Tungaloy finishing inserts such as the CCGT09T304 NS9530 Technical Data Article number: 6714355 SKU: 6714355-Tungaloy Manufacturer SKU: TUN6714355 Manufacturer: Tungaloy Series: ISO turning indexable inserts Designation: CCGT09T304 NS9530 Core technical data Size: 09 Insert thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Hole: cylindrical hole + single-sided countersink (40°–60°) Special features Uncoated cermet grade NS9530 Finishing grade for steel; ideal for continuous cuts and small depths One-sided chipbreaker Rhombic insert form (CCGT) Compatibility: dependent on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The CCGT09T304 NS9530 is a finishing-grade cermet engineered primarily for machining steel where a fine surface finish and low cutting forces are required. Is the NS9530 grade coated? No, the NS9530 grade is supplied uncoated; its fine-grain cermet substrate and sharp edge are optimised for finishing applications under continuous cutting. Which operations suit the rhombic geometry? The rhombic CCGT form is suitable for both external and internal turning, especially where an 80° included angle and a small corner radius support precise contouring and surface integrity. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius balances edge strength and surface finish: it helps avoid premature chipping while maintaining the fine finish expected from a finishing grade at small depths of cut. How is clamp and holder compatibility ensured? Compatibility depends on holder form, relief angle, tolerance class, fastening system, insert size and thickness; the CCGT09T304 designation follows ISO conventions to help match the correct holder and clamping kit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, the NS9530 uncoated cermet grade and ISO compatibility for consistent finishing results; this insert reduces cutting forces while improving surface quality. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 09T304 NS9530 ISO turning insert — finishing grade (Tungaloy) CCGT 09T304 NS9530 is an ISO‑standard rhombic turning insert designed for finishing turning of steel with a sharp, uncoated cermet cutting edge and a 0.4 mm nose radius. NS9530 cermet, uncoated finishing grade Sharp edge for low cutting forces Rhombic ISO CCGT 09T304, 80° geometry Cylindrical hole with 40°–60° countersink High‑precision finishing performance for consistent surfaces The NS9530 uncoated cermet grade delivers a sharp cutting edge tailored for fine finishing operations. Its geometry and edge preparation lead to low cutting forces, which reduces chatter and tool deflection and therefore improves dimensional stability on external and internal turns. For shops prioritising surface integrity, the insert supports continuous cuts and small depths of cut, resulting in a reliably high surface finish without resorting to additional passes. Design and mounting features that simplify tool selection The insert follows the ISO CCGT form and is compatible with standard external holders or boring bars; compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness. The insert has a rhombic shape with an 80° included angle, a 0.4 mm nose radius and a 7° relief angle, and is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) for secure clamping. These measurable characteristics make holder matching straightforward and reduce setup time in production environments. Production advantages and economical operation Using an uncoated cermet finishing grade offers low friction at the cutting edge and excellent edge retention on steels, which translates into fewer interruptions for tool changes and a more economical machining cycle. The combination of sharp geometry and the NS9530 substrate provides consistent chip formation for finishing feeds, supporting higher process reliability and predictable part outcomes. The insert’s construction enables efficient batch finishing where uniformity and repeatability are required. Application guidance and material suitability This insert is optimised for turning steel in finishing applications; choose the NS9530 grade and the matching single‑sided chipbreaker for workpieces where a fine surface and low cutting forces are priorities. The system typically consists of the ISO insert, a matching external holder or boring bar, a support or clamp set and suitable fixing screws. For less experienced users, matching the relief angle, tolerance class and clamping method to the holder specification is decisive for achieving the expected results. For professional finishing of steel, request original Tungaloy inserts from Metav Werkzeuge for immediate availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997907 SKU: 6997907-Tungaloy Manufacturer SKU: TUN6997907 Model series: ISO‑turning inserts Manufacturer: Tungaloy Material: carbide Data Nose radius: 0.4 mm Relief angle: 7° Thickness: 3.97 mm Size designation: 09 Included angle: 80° Manufacturer article number: 6997907 Special features Uncoated cermet grade NS9530 Single‑sided chipbreaker Rhombic insert shape Cylindrical hole with one‑sided countersink (40°–60°) Designed for finishing turning of steel Compatibility determined by form, relief, tolerance, fastening, size and thickness Optimised for continuous cuts and small depths of cut System components: ISO insert, external holder or boring bar, clamp/underlay and spare screws FAQ What machining tasks is this insert designed for? This insert is intended for finishing turning of steel; the NS9530 uncoated cermet grade and rhombic geometry make it suitable for external and internal finishing operations. Which holder types are compatible with the CCGT 09T304 NS9530 insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the insert is designed for standard external holders and boring bars that accept ISO CCGT‑style inserts. How does the NS9530 grade affect cutting behaviour? The NS9530 uncoated cermet provides a sharp edge and reduced cutting forces, promoting stable chip formation and superior surface finish in finishing cuts. What clamping feature does the insert have? The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure reliable clamping in compatible holders. Is the insert suitable for interrupted cuts or heavy roughing? This grade and geometry are optimised for continuous finishing cuts and small depths of cut; for heavy roughing or highly interrupted cuts, a different grade or geometry should be selected. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing and consistent chip control thanks to the combination of a sharp uncoated cermet grade and an ISO rhombic geometry; the low cutting forces deliver excellent surface quality while the compact corner radius and single-sided chipbreaker ensure predictable results in continuous turning. Order the insert directly via Metav Werkzeuge or contact our consultants for selection support. CCGT 09T304 NS9530 – ISO rhombic turning insert, 7° clearance (Tungaloy) The CCGT 09T304 NS9530 is an ISO rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and stable chip control for continuous turning with small depths of cut. Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces ISO rhombic CCGT09 with 7° clearance Single-sided chipbreaker; hole with countersink Achieve high-precision finishing with low cutting forces and superior surface quality The uncoated NS9530 cermet is formulated for finishing steel components where surface integrity matters. Its sharp edge geometry produces low cutting forces, which reduces tool-induced vibration and helps maintain tight dimensional tolerances. In practice, this results in a smoother surface finish and less need for secondary operations when machining continuous cuts and shallow depths of cut. For shops focusing on consistent part quality, the combination of a fine cermet grade and a small corner radius delivers measurable gains in finish and repeatability. Ensure reliable seating and compatibility with ISO holders for consistent clamping Compatibility with a toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The rhombic insert features a 7° clearance angle and is supplied with a cylindrical hole plus a single-sided countersink (40°–60°), so correct matching to the clamping seat is essential. The ISO designation guarantees interchangeability with standard holders; however, checking the holder’s seat geometry and screw style ensures the insert is clamped securely and performs as intended. Proper seating minimises micro-movement, improving tool life and part consistency. Boost productivity with predictable chip control and application-focused geometry The insert’s single-sided chipbreaker and compact 0.4 mm corner radius are optimised for finishing passes, promoting controlled chip formation and stable cutting even at modest feed rates. A plate thickness of 3.97 mm contributes to rigidity in the cutting zone, while the rhombic form and 80° included angle provide accessibility for external and internal turning. Together these features reduce process variation and the likelihood of rework, delivering a more economical production flow for short-cycle or high-mix environments where surface quality and repeatability are priorities. For precision finishing with Tungaloy’s NS9530 cermet, contact Metav Werkzeuge for technical selection and current availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997913 SKU: 6997913-Tungaloy Manufacturer SKU: TUN6997913 Model series: ISO-Drehwendeschneidplatten ISO designation: CCGT09T304 Facts Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Insert size: 09 Included angle: 80° Countersink range: 40°–60° Special features Uncoated cermet grade NS9530 Rhombic insert shape Single-sided chipbreaker Cylindrical hole with one-sided countersink Finishing grade for steel Designed for external and internal turning FAQ What materials is this insert suitable for? The CCGT 09T304 NS9530 insert is a finishing grade formulated primarily for steel; the NS9530 uncoated cermet provides low cutting forces and excellent surface finish when turning steel components. How does the insert achieve better surface quality? The sharp edge geometry of the NS9530 cermet, combined with the 0.4 mm corner radius and single-sided chipbreaker, reduces cutting forces and vibration, which improves surface finish during continuous finishing passes. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness; the ISO designation CCGT09T304 ensures interchangeability with standard rhombic holders designed for 09-sized inserts. Is the insert supplied with a hole and countersink? Yes, the CCGT 09T304 NS9530 features a cylindrical hole with a single-sided countersink (40°–60°), enabling secure clamping and easy replacement using the correct ISO screw and seat. What is the manufacturer article number and SKU for reordering? The manufacturer article number is 6997913 and the SKU is 6997913-Tungaloy; the manufacturer SKU is TUN6997913. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of edge stability, long tool life and ISO compatibility to maintain a smooth production flow; the tough, coated grade is designed to perform under varying engagement conditions. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. CCGT 09T304 SH7025 ISO rhombic turning insert, 80° geometry — Tungaloy The CCGT 09T304 SH7025 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for stable cutting edges and reliable chip control. ISO rhombic insert, 80° geometry Coated cemented carbide SH7025 grade 0.4 mm nose radius for fine turning Cylindrical hole with single-sided countersink Consistent performance where engagement varies The SH7025 grade is a coated cemented carbide developed for tough applications that demand edge stability even when cutting conditions change. As a rhombic ISO insert with a primary 80° main angle, this turning tip balances strength and accessibility for shoulder cuts and general turning. The coated substrate helps reduce flank wear, extending usable life and lowering total tooling costs per component, which supports efficient batch production and reduces unplanned downtime. Fast integration into ISO tool systems for predictable changeovers This insert conforms to ISO dimensions and interfaces, so compatibility with holders is determined by shape, clearance, tolerance class, clamping and thickness. The design is intended for straightforward assembly into a standard tool system—insert, compatible outside holder or boring bar, underlay/shim and clamp set with spare screws—allowing quick indexed changes and minimal setup time. The 7° clearance preserves cutting geometry while the 3.97 mm plate thickness provides the rigidity required for repeatable, vibration-resistant machining. Improved chip control and surface quality for finishing and semi-finishing The single-sided chipbreaker channels chips reliably and supports consistent surface finish on interrupted or varying cuts. The small 0.4 mm nose radius facilitates fine finishing passes and delicate profile work while the 80° rhombic shape gives improved approach angles for shoulder and groove features. Clear chip evacuation reduces heat buildup at the cutting edge, which in turn contributes to longer tool life and steadier dimensions across series parts. Practical selection and handling to boost productivity Choose a chipbreaker and grade that match material, cutting mode and machine stability; the SH7025 grade suits operations where edge resilience is prioritised, particularly with smaller toolholders or variable engagement. Keep spare screws and a matched shim set on hand to reduce machine downtime during insert changes. Regular inspection of the cutting edge and adherence to recommended feeds and speeds will maximise the economic benefit of the insert while ensuring consistent component quality. The insert is supplied with a cylindrical hole featuring a single-sided countersink (40°–60°) for secure clamping. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy CCGT 09T304 SH7025 insert into production, or request compatibility guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967372 Manufacturer SKU: TUN6967372 SKU: 6967372-Tungaloy Part designation: CCGT09T304 SH7025 Brand: Tungaloy Numbers / Facts Nose radius: 0.4 mm Clearance angle: 7° Plate thickness: 3.97 mm Insert size: 09 Main angle: 80° Special features / Versions Coated cemented carbide SH7025 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Application: Turning (external & internal) ISO standard turning insert series FAQ Is this insert suitable for finishing and light profiling? The CCGT09T304 SH7025 insert is intended for turning tasks where a small nose radius is required; the 0.4 mm radius supports finishing and fine profiling while the grade’s toughness preserves the cutting edge. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping and plate thickness; the insert follows ISO rhombic dimensions so matching an ISO 09 holder for rhombic geometry will ensure correct fit. What are the chip control characteristics of this insert? The one-sided chipbreaker aids consistent chip flow and reduces heat generation at the edge, improving surface finish and contributing to predictable tool life under varying engagement. How should the insert be mounted and secured? Fit the insert with a matching underlay or shim and clamp set; use the cylindrical hole with the single-sided countersink to seat the screw and clamp securely, and keep spare screws to minimise machine downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH7025 Wendeplatten - Tungaloy
High edge stability and controlled chip formation make the CCGT09T304 SH7025 a reliable choice for productive turning operations. The coated carbide SH7025 grade and a 0.4 mm corner radius support consistent tool life and repeatable surface quality. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific recommendations. CCGT 09T304 SH7025 Turning indexable insert by Tungaloy CCGT09T304 SH7025 is an ISO-standard indexable insert for general turning applications, designed for use with compatible 80° rhombic holders. Coated SH7025 grade for edge toughness One-sided chipbreaker for controlled chips Rhombic CCGT insert, 80° cutting geometry Cylindrical hole with single-side countersink High stability for consistent turning results The coated carbide composition of this indexable insert provides a balance between toughness and wear resistance, making it particularly suited to variable engagement conditions. The SH7025 grade is formulated for edge stability, which reduces the risk of chipping during interrupted cuts and enhances process reliability. When mounted in a suitably rigid holder, the insert maintains cutting performance over longer tool life, supporting predictable cycle times and fewer tool changes. Seamless integration with ISO holders and predictable geometry Compatibility is governed by form, 7° clearance, tolerance class, fastening, size and thickness; the CCGT09T304 conforms to the ISO turning insert system to ensure straightforward replacement. The 80° cutting angle and rhombic geometry permit a versatile range of external and internal turning tasks, while the 3.97 mm thickness gives mechanical stability in the pocket. The insert's cylindrical hole with a single-side countersink (40°–60°) enables secure clamping and simple alignment in standard clamping systems. Effective chip control and economical machining Equipped with a one-sided chipbreaker, the insert supports controlled chip formation for common turning operations, aiding chip evacuation and reducing rework. The combination of the SH7025 coating and the 0.4 mm corner radius delivers a compromise between finish quality and robustness; small radii improve surface finish, while the coating maintains flank resistance. This results in fewer stoppages for insert changes and a measurable improvement in machining economy for small-tool setups or changing engagement depths. For tailored application advice or to request a quote for the Tungaloy CCGT09T304 SH7025 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with grade and chipbreaker selection Technical data Manufacturer article number: 6967412 SKU: 6967412-Tungaloy Manufacturer SKU: TUN6967412 Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications ISO designation: CCGT09T304 Insert size: 09 Cutting angle: 80° Clearance angle: 7° Corner radius: 0.4 mm Plate thickness: 3.97 mm Design and features Material: carbide (coated) Coating/grade: SH7025 Chipbreaker: one-sided Hole: cylindrical with single-side countersink 40°–60° Shape: rhombic Application: turning System: ISO indexable insert; compatible with matching holder, clamp and screw FAQ What turning tasks is this insert best suited for? The CCGT09T304 SH7025 Tungaloy indexable insert is intended for general external and internal turning, performing well under variable engagement conditions and in smaller-tool applications where edge stability is essential. How is holder compatibility determined for this insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCGT09T304 follows ISO standards, so matching ISO rhombic holders with the corresponding pocket and clamping set are required. What are the key geometric specifications to consider? Key values are the 0.4 mm corner radius, 7° clearance, 80° cutting geometry, insert size 09 and 3.97 mm plate thickness, which together determine the insert’s cutting behaviour and fit in the toolholder. Does the insert provide good chip control? Yes. The integrated one-sided chipbreaker supports controlled chip formation, improving evacuation and reducing the likelihood of chip-related interruptions in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com