Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 09T304 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 coated carbide grade, the ISO‑standard compatibility and the 80° rhombic geometry to ensure stable cutting and consistent surface quality in both external and internal turning. Order the insert directly via Metav Werkzeuge or request specification support from our consultants. CCGT 09T304 SH725 80° rhombic indexable insert for turning — Tungaloy The CCGT09T304 SH725 is an ISO‑standard indexable insert designed for external and internal turning, providing a tough, edge‑stable grade for varying engagement conditions. SH725 coated carbide grade for tough cutting 80° rhombic geometry for versatile turning 0.4 mm corner radius for fine edge detail Cylindrical hole with 40°–60° countersink Consistent tool life and cutting stability with a tough coated grade The SH725 coated carbide formulation provides a balance between toughness and wear resistance, designed specifically for turning applications where engagement conditions change frequently. Using a coated cemented carbide grade reduces flank and crater wear under interrupted cuts and varying depths of cut, which translates into longer tool life and fewer indexings. The combination of coating and substrate hardness enables productive machining with a focus on repeatable results rather than frequent tool changes, so process windows remain stable even when component geometries vary. Geometry tailored for precision and secure clamping The insert’s 80° rhombic geometry and 0.4 mm corner radius allow precise control over cutting edge contact and surface finish, making the insert suitable for both finishing and light roughing tasks. The single‑sided chipbreaker helps to direct chips predictably in typical turning feeds, improving swarf control and reducing the risk of edge damage. Compatibility with the holder depends on form, clearance angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole with single‑side countersink (40°–60°) ensures secure mounting and correct seat alignment when used with the appropriate clamping set and replacement screws. ISO‑based system approach for reliable workshop integration As part of an ISO turning insert series, this component fits into a system comprising an ISO insert, a compatible external holder or boring bar, shims/clamp sets and standard fixing screws. Choosing the correct chipbreaker and grade for the workpiece material and machining stability is essential: this insert is intended for turning and performs best when the grade and breaker match the alloy and cutting conditions. Clear labelling and standardised geometry facilitate tool inventory management and repeatable set‑ups, helping to reduce downtime and maintain a steady production flow. For high‑stability turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for expert advice and secure supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737008 Manufacturer SKU: TUN6737008 SKU: 6737008-Tungaloy Model series: ISO turning indexable inserts Grade: SH725 Material: Carbide Core specifications Insert designation: CCGT09T304 Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 80° Special features Rhombic insert shape Cylindrical hole with single‑side countersink (40°–60°) Single‑sided chipbreaker Coated carbide for tough cutting ISO‑compatible for external and internal turning FAQ What materials is the CCGT09T304 SH725 insert best suited for? The CCGT09T304 SH725 insert from Tungaloy is formulated as a tough coated carbide grade for general turning and is particularly effective where variable engagement and interrupted cuts occur; selection of chipbreaker and cutting data should match the specific workpiece material. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure mounting; correct clamping depends on matching the ISO form, clearance angle, tolerance class, fastening and thickness to the holder. Can the insert be used for both external and internal turning? Yes, the ISO‑standard geometry and rhombic form allow the insert to be applied to both external and internal turning operations when paired with the appropriate external holder or boring bar. What advantage does the 0.4 mm corner radius provide? A 0.4 mm corner radius delivers finer edge engagement and improved surface finish control, making it suitable for finishing passes and light profiling where dimensional accuracy matters. Is the CCGT09T304 supplied as part of a system? The insert is intended for use within an ISO turning insert system, comprising the insert itself, a matching external holder or boring bar, shims/clamp sets and standard replacement screws for reliable assembly and repeatable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, edge‑stable coated carbide grade and precise ISO rhombic geometry to improve process reliability and surface quality in turning operations; the combination of a 0.4 mm corner radius and a 7° relief angle provides controlled cutting behaviour and flexible use with a wide range of holders — order directly via Metav Werkzeuge or ask our consultants for holder compatibility. CCGT 09T304 SH725 indexable insert for turning — Tungaloy CCGT 09T304 SH725 is an ISO‑standard rhombic indexable insert designed for external and internal turning, combining a 0.4 mm corner radius with a 7° relief angle for stable performance in variable engagement conditions. ISO rhombic insert geometry SH725 coated carbide for edge stability 0.4 mm corner radius for fine finishing Central hole with countersink for secure clamping Reliable performance from a tough coated grade The SH725 coating variant is a coated carbide grade optimised for toughness and cutting‑edge stability, making it suitable where tool engagement can vary or where smaller tooling is used. The grade's composition supports consistent chip formation and extended edge life in interrupted cuts, which in turn reduces unplanned tool changes and contributes to higher overall productivity. By selecting a robust grade such as this, process planners gain a measurable advantage in machining repeatability and component quality. Geometry and clamping features that aid precision The insert's rhombic form (size 09) and 80° included angle deliver predictable approach geometry for turning tasks, while the 0.4 mm corner radius balances edge strength with the ability to produce fine surface finishes. The 7° relief angle reduces rubbing and heat generation at the flank, improving tool life in many turning applications. The plate is 3.97 mm thick, and the centre is prepared with a cylindrical hole plus single‑side countersink (40°–60°) to ensure secure, repeatable clamping in compatible holders. These geometric details are decisive when matching inserts to clamping systems and fixture tolerances. Practical selection guidance for machinists and engineers Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; therefore, choose the matching external holder or boring bar, underplate/shim and fastening screws that correspond to the insert geometry. The included single‑sided chipbreaker is aimed at predictable chip control for many turning tasks; selecting an alternative chipbreaker and the SH725 grade according to workpiece material and machining stability will help to optimise cycle time and surface integrity. The insert is intended primarily for turning and integrates into standard ISO indexable insert systems for straightforward tool‑room planning. For reliable turning performance with the SH725 grade from Tungaloy, contact Metav Werkzeuge for precise holder compatibility and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6737133 SKU: 6737133-Tungaloy Manufacturer SKU: TUN6737133 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included approach angle: 80° Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Material: carbide Coating/grade: SH725 (coated carbide) Shape: rhombic (CCGT) Chipbreaker: single‑sided Application: turning (external and internal) Mounting: with central hole for secure clamping FAQ What materials is this insert best suited for? The CCGT 09T304 SH725 insert is intended for turning a broad range of materials where a tough, edge‑stable grade is required; the SH725 coated carbide performs particularly well in applications with variable engagement and interrupted cuts. How does the 0.4 mm corner radius affect surface finish and tool life? A 0.4 mm corner radius offers a compromise between increased edge strength and the ability to produce a fine surface finish; the radius helps to distribute cutting forces and extend edge life under standard turning conditions. Which holder features are required for secure clamping? Holders compatible with the ISO CCGT form, accepting size 09 plates with a central cylindrical hole and single‑side countersink, are required to ensure repeatable, secure clamping for the Tungaloy indexable insert. Is the chip control suitable for finishing passes? The single‑sided chipbreaker on this insert supports controlled chip formation and can be used for finishing where stable cutting conditions are present; pairing the insert grade with the correct feed and speed settings improves surface integrity. What identifies the product and where is it from? This item is the CCGT 09T304 SH725 indexable insert (SKU 6737133‑Tungaloy) manufactured by Tungaloy and designed for ISO turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a resilient SH725 coating, ISO‑standard CCGT geometry and a fine 0.4 mm nose radius for stable, repeatable turning results; order the insert via Metav Werkzeuge or consult the specialists for matching holder options. CCGT CCGT09T304 SH725 turning insert (ISO rhombic) — Tungaloy A CCGT09T304 SH725 ISO rhombic turning insert designed for external and internal turning applications, offering a tough coated carbide grade for changing engagement conditions. ISO rhombic CCGT09T304 geometry for wide compatibility Coated carbide grade SH725 for edge stability 0.4 mm nose radius for precise surface finish Cylindrical hole + single‑side countersink mounting Reliable performance for diverse turning tasks The insert is built on an ISO rhombic platform that ensures broad compatibility with standard toolholders; this geometry facilitates straightforward indexability and predictable cutting behaviour. The coated carbide substrate provides a balance between toughness and wear resistance, making the component suitable for both external and internal turning. By choosing a defined nose radius of 0.4 mm, machining yields consistent surface finish and dimensional control while keeping cutting forces moderate. The design emphasis is on repeatability and process stability, which is essential for series production and mixed-batch work. Edge stability and suitability for variable engagement The SH725 grade is a purpose‑developed coating and substrate combination that enhances edge robustness under varying depths of cut and interrupted cuts. This makes the insert particularly useful when tool size is small or when engagement conditions change frequently—common scenarios in subcontract and precision turning shops. The single‑sided chipbreaker contributes to controlled chip formation and evacuation, reducing the risk of recutting and thermal peaks. In practical terms, the result is fewer scrap parts and longer intervals between index changes, supporting efficient cycle times. Mounting accuracy and mechanical fit for consistent results Mechanical mounting features are decisive for insert behaviour; this item is supplied with a hole and a cylindrical hole with a single‑side countersink (40°–60°) to match standard clamping arrangements. The plate thickness of 3.97 mm and the ISO size designation ensure correct seating and clamping force distribution when paired with compatible holders. The 7° clearance angle reduces flank rubbing while maintaining adequate support for the cutting edge. Correct selection of holder geometry in line with these parameters ensures repeatable positioning and reduces vibration, which in turn improves surface integrity. Materials, applications and practical guidance Constructed from carbide with a protective SH725 coating, the insert is optimised for turning a broad range of materials when used with appropriate cutting data. Typical applications include finishing and medium‑duty roughing passes in steel and alloyed materials where edge security is a priority. For operators less familiar with grade selection: the coated carbide layer increases thermal resistance and wear life, while the substrate maintains toughness—together reducing the likelihood of chipping during variable cuts. Selection of feeds, speeds and coolant strategy should follow machining recommendations for the chosen workpiece material to exploit the insert’s advantages fully. For reliable turning performance with Tungaloy’s SH725 grade, contact Metav Werkzeuge for tailored holder compatibility and delivery assistance. Technical data Article number: 6784490 SKU: 6784490-Tungaloy Manufacturer SKU: TUN6784490 Model series: ISO‑turning indexable inserts Facts Angle: 80° Clearance angle: 7° Nose radius: 0.4 mm Plate thickness: 3.97 mm Size: 09 Special features Coating: SH725 Material: carbide Plate form: rhombic Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning Compatibility note: compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The CCGT09T304 SH725 Tungaloy turning insert is designed for a wide range of metals; its coated carbide construction favours steel and alloyed materials where edge stability is essential. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius on the insert delivers improved surface quality and dimensional control during finishing cuts while keeping cutting forces at manageable levels. Is the insert compatible with standard ISO holders? Yes — the ISO rhombic geometry and the specified hole/countersink configuration make the insert compatible with holders that accept CCGT‑form plates, provided the clamping and tolerance class match. What advantages does the SH725 coating provide? The SH725 coating enhances edge toughness and wear resistance, offering greater stability in applications with variable engagement or smaller tool sizes. Can the insert be used for internal turning? The insert is suitable for both external and internal turning when mounted in an appropriately sized and supported toolholder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 SH730 Wendeplatten - Tungaloy
Benefit from the combination of a tough SH730 coating, a precise 0.4 mm corner radius and ISO compatibility for stable, repeatable turning operations; order the CCGT09T304 insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT CCGT09T304 SH730 — ISO rhombic turning insert for external and internal turning (Tungaloy) CCGT09T304 SH730 is a precision rhombic indexable insert designed for general turning applications, offering robust edge stability for small tools and variable engagement conditions SH730 coated carbide for stable cutting 0.4 mm corner radius for consistent profiles ISO rhombic form CCGT09T304 with 7° clearance Countersunk locating hole, 3.97 mm thickness Enhanced edge stability for consistent productivity The coated carbide grade SH730 is formulated to deliver edge stability and reliable tool life, especially when using smaller toolholders or when cut engagement varies. The insert balances toughness and wear resistance, reducing the risk of chipping under interrupted cuts. By choosing a grade that emphasises durability, shops achieve fewer index changes and smoother production runs, supporting higher machine uptime and predictable cycle times. Geometry and clamping for repeatable accuracy The ISO rhombic geometry with an 80° cutting angle, 7° clearance and 0.4 mm corner radius provides a stable cutting edge and predictable profile control. The insert’s countersunk locating hole (cylindrical hole plus single-sided countersink at 40°–60°) ensures positive seating and repeatable positioning in standard ISO holders. With a plate thickness of 3.97 mm, the geometry supports secure clamping and consistent cutting plane alignment, which simplifies setup and reduces vibration-related quality issues. Practical use and process flexibility in turning Designed primarily for turning, the indexable insert is intended for both external and internal operations where selection of an appropriate chipbreaker and grade matters. The one-sided chipbreaker helps with chip control in a wide range of cutting conditions; pairing the insert with the correct holder and cutting data will aid surface finish and dimensional repeatability. For tailored cutting parameters or compatibility checks, Metav Werkzeuge provides application guidance and cutting data to match the workpiece and machining strategy. For Tungaloy-grade reliability and application advice, contact Metav Werkzeuge to source the CCGT09T304 SH730 insert and request compatibility or cutting-parameter support via info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: 6854004 Manufacturer SKU: TUN6854004 SKU: 6854004-Tungaloy Model series: ISO turning indexable inserts Designation: CCGT09T304 Grade/coating: SH730 Material: carbide Core specifications Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Cutting angle: 80° Features and applications Rhombic insert geometry (CCGT) Countersunk locating hole (cylindrical hole + single-sided countersink 40°–60°) One-sided chipbreaker Compatible with ISO holders for external and internal turning Suitable for variable engagement and small tools Coated grade engineered for edge stability FAQ What work is this insert intended for? The CCGT09T304 SH730 is intended for general turning—external and internal—where a robust, coated carbide grade is required for stable cutting. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO rhombic form standards and the locating hole and dimensions allow compatibility with standard ISO turning holders when matched for size and clamping style. Which materials is the SH730 grade best for? SH730 is a tough, edge-stable coated carbide grade designed to perform well under variable engagement and in circumstances where edge robustness is critical; select the chipbreaker and cutting data according to the specific workpiece material. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius provides a balance between profile strength and finish; it improves edge life compared with sharper radii while maintaining good dimensional control for turned profiles. What does the countersunk locating hole provide? The countersunk locating hole (cylindrical hole plus single-sided countersink 40°–60°) ensures reliable seating and repeatable positioning within the clamping system, reducing index and setup variability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility, the sharp TH10 uncoated carbide grade and the stable single‑sided chipbreaker to achieve low cutting forces and consistent surface finishes in turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application support. CCGT 09T304 TH10 Drehen — Tungaloy ISO turning indexable insert, uncoated carbide CCGT09T304 TH10 is an ISO‑standard, rhombic turning insert designed for external and internal turning of non‑ferrous materials and other applications where a sharp, uncoated edge supports low cutting forces and clean surfaces ISO‑standard rhombic insert CCGT 09 TH10 uncoated carbide for clean surfaces 7° clearance and 80° included angle Single‑sided chipbreaker, 0.4 mm corner radius Consistent finishes and reduced cutting forces for non‑ferrous work The use of the TH10 uncoated carbide grade provides a sharp cutting edge that is optimised for materials such as aluminium and other non‑ferrous alloys; this results in reduced cutting forces and improved surface quality. Because the grade is uncoated, the cutting edge can deliver low friction and precise shearing, which is particularly beneficial where small contact forces and a tidy finish are priorities. In production, this characteristic can translate into fewer burrs and less downstream rework, improving overall process efficiency. Secure clamping and straightforward compatibility with ISO holders Designed to the ISO plate series, the insert’s fit is determined by form, 7° clearance, tolerance class, fixing, size and thickness. The rhombic shape and the cylindrical hole with single‑side countersink (40°–60°) ensure repeatable seating and stable clamping in compatible external holders or boring bars. The plate’s 3.97 mm thickness and standard 09 size simplify selection and replacement across common toolholders, reducing machine downtime and supporting consistent repeatability in batch production. Predictable chip control and efficient turning strategies The single‑sided chipbreaker combined with a 0.4 mm corner radius supports controlled chip formation when paired with the correct cutting parameters and workpiece stability. For external and internal turning, selecting the appropriate chipbreaker geometry and matching the uncoated grade to the workpiece material will result in stable machining, consistent surface integrity and economical tool use. This insert is suited to applications where process reliability and straightforward edge behaviour are required rather than extreme wear resistance. Contact Metav Werkzeuge for application guidance on the Tungaloy CCGT09T304 TH10 insert and request tailored cutting data via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: 6801339 Manufacturer SKU: TUN6801339 SKU: 6801339-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Thickness: 3.97 mm Size designation: 09 Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Material: cemented carbide Grade: TH10 (uncoated) Plate form: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) FAQ What materials is this insert optimised for? The CCGT09T304 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated, sharp edge supports low cutting forces and clean surface finishes. How is the insert fixed in the toolholder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure mounting; compatibility with a holder depends on form, clearance angle, tolerance and plate thickness. Which features improve chip control? The single‑sided chipbreaker together with the 0.4 mm corner radius provides controlled chip formation suitable for stable turning operations. Can this insert be used for internal turning? Yes; the ISO rhombic geometry and the TH10 grade make the insert suitable for both external and internal turning where material and stability match the grade. What distinguishes the TH10 grade from coated grades? TH10 is an uncoated, sharp universal grade designed to reduce cutting forces and enhance surface quality rather than to provide additional wear resistance offered by coatings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of standardised ISO compatibility, a sharp uncoated carbide grade for low cutting forces, and a compact 0.4 mm corner radius to maintain a steady production flow. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. CCGT09T304 TH10 CCGT — Turning indexable insert, uncoated carbide, 0.4 mm radius — Tungaloy The CCGT09T304 TH10 is an ISO rhombic indexable insert designed for precision external and internal turning, optimised for non‑ferrous materials and operations requiring low cutting forces and clean surface finishes ISO rhombic turning insert 09 size Uncoated carbide grade TH10 Sharp universal edge for low cutting forces Central hole with countersink for secure clamping Improved productivity through low cutting forces and consistent finishes The uncoated carbide composition and the TH10 grade deliver a deliberately sharp cutting edge that reduces cutting resistance, which in turn lowers power draw and heat generation during machining. This results in more stable cuts when machining aluminium alloys and other non‑ferrous materials, producing a clean surface with fewer secondary operations required. As an ISO‑conforming insert, it enables quick replacement and repeatability across toolholders, supporting predictable cycle times and reduced downtime. Secure clamping and compatibility with ISO toolholder systems Engineered as a standard ISO insert, the plate form and hole geometry guarantee positive seating in compatible holders. The central hole with a cylindrical bore and a single‑sided countersink (40°–60°) ensures reliable fixation with standard screws and clamps, reducing the risk of micro‑movement under load. The combination of the rhombic shape and a clearance angle of 7° supports flexible approach angles for both external and internal turning, allowing straightforward integration into existing fixtures and turning bars. Application range and edge behaviour for non‑ferrous machining With a corner radius of 0.4 mm, this insert balances edge strength and form accuracy, making it suitable for finishing and semi‑finishing passes where dimension and surface quality matter. The one‑sided chipbreaker and the uncoated edge promote predictable chip formation on soft alloys, limiting smearing and built‑up edge. For workshops seeking a universal solution for aluminium and similar materials, the insert provides a cost‑efficient option without an additional coating layer, facilitating lower cutting forces and improved tactile surface quality. For ordering or technical advice on Tungaloy TH10 turning inserts, contact Metav Werkzeuge for tailored recommendations and procurement: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6801346 Manufacturer SKU: TUN6801346 SKU: 6801346-Tungaloy Model series: ISO turning indexable inserts Type designation: CCGT09T304 Facts Material: carbide Coating: uncoated Radius: 0.4 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Size: 09 Special features Rhombic plate form Central hole with cylindrical bore and single‑sided countersink (40°–60°) One‑sided chipbreaker Sharp universal grade TH10 for non‑ferrous materials Application: external and internal turning FAQ What materials is this insert best suited for? The CCGT09T304 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as aluminium alloys and other soft metals, where a sharp, uncoated edge supports low cutting forces and clean finishes. Is the insert compatible with standard ISO toolholders? Yes. The insert follows ISO dimensions and its rhombic form, hole position and tolerance class make it compatible with matching ISO‑type turning holders and boring bars. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius offers a balance between edge strength and fine surface generation; it is suitable for finishing and semi‑finishing passes where dimensional accuracy and surface quality are priorities. What type of chip control can be expected? The one‑sided chipbreaker is designed to promote predictable chip formation when turning non‑ferrous materials, helping to avoid smearing and maintaining a stable cutting process. Which grade and edge condition does the insert have? The insert is supplied in the uncoated TH10 grade, offering a sharp universal edge for operations that benefit from low cutting forces and minimal built‑up edge. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of ISO interchangeability, a sharp uncoated TH10 carbide cutting edge and precise geometry — the result is low cutting forces, clean surface finishes and repeatable clamping in turning operations. Order the CCGT09T304 TH10 insert through Metav Werkzeuge or consult their technical team for tailored application advice. CCGT09T304 TH10 Tungaloy indexable turning insert A CCGT09T304 TH10 indexable turning insert engineered for external and internal turning, offering a rhombic form with a small corner radius for fine finishing and stable chip control. ISO‑standard rhombic insert 09 size Uncoated TH10 carbide for clean surfaces 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Predictable fit and secure clamping for productive turning The ISO‑standard geometry guarantees interchangeability with compatible holders: form, 7° relief, tolerance class, fastening and thickness determine compatibility. This predictability reduces setup time and minimises indexing errors during tool changes. The rhombic shape ensures access to both external and internal contours while the central hole with a one‑sided countersink provides secure seating and repeatable axial positioning. As a result, machining cycles are more stable and tool changeovers faster. Low cutting forces and improved finishes on non‑ferrous work The uncoated carbide grade TH10 is a sharp universal grade optimised for non‑ferrous materials and light cutting conditions where a clean cutting edge is required. The uncoated cutting edge reduces adhesion and built‑up edge when machining softer alloys, which leads to clean surfaces and extended edge life in these applications. The single‑sided chipbreaker supports controlled chip formation under moderate feeds, translating into fewer interruptions and more consistent surface quality. Geometry that balances edge strength and precision A small 0.4 mm radius at the corner gives a fine finish while maintaining sufficient edge strength for light to medium cuts. The plate thickness of 3.97 mm and size 09 contribute to rigidity when clamped, reducing vibration and improving dimensional repeatability. The insert’s included angle of 80° and clearance geometry are chosen to balance cutting forces and tool accessibility, making the insert suitable for finishing and semi‑finishing tasks. The uncoated TH10 specification simplifies sharpening and inspection in-house if required. Contact Metav Werkzeuge for application consultation and to request availability of the Tungaloy CCGT09T304 TH10 indexable insert for turning operations Technical data Article number: 6801344 Manufacturer SKU: TUN6801344 SKU: 6801344-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CCGT09T304 TH10 Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 7° Thickness: 3.97 mm Size: 09 Special features Material: carbide Grade: TH10 (uncoated) Plate form: rhombic Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) ISO‑standard insert for predictable interchangeability FAQ What materials is this insert best suited for? The CCGT09T304 TH10 insert is specified for non‑ferrous materials and applications where an uncoated TH10 edge supports low cutting forces and clean finishes. How does the 0.4 mm radius affect machining? A 0.4 mm corner radius provides a finer surface finish while keeping adequate edge strength for finishing and light semi‑finishing operations with the CCGT09T304 TH10 insert. Is the insert compatible with all ISO holders? Compatibility depends on holder form, 7° relief, tolerance class, fastening method, size and thickness; the ISO‑standard geometry simplifies matching but holder verification is recommended. What does the cylindrical hole with countersink provide? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure seating and repeatable axial positioning, improving clamping stability for consistent machining. Can the uncoated TH10 grade be resharpened? Yes, the uncoated carbide edge can be resharpened or reconditioned according to in‑house tool maintenance practices to extend usable life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 UM 1105 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications insert CCGT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T304UM1105-SANDVIK Figures for the tool: ISO-Code: CCGT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1105 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-09T304-1105-Sandvik 40END
CCGT 09T304 UM 1115 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts CCGT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T304UM1115-SANDVIK Data & Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCGT-09T304-1115-Sandvik 40END
CCGT 09T304 UM 1125 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCGT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T304UM1125-SANDVIK Data/ Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-09T304-1125-Sandvik 40END
CCGT 09T304 UM 1515 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts CCGT 09T304 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T304UM1515-SANDVIK Figures for the tool: ISO-Code: CCGT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-09T304-1515-Sandvik 40END
CCGT 09T304 UM 5015 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for CCGT 09T304 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T304UM5015-SANDVIK Facts and Figures: ISO-Code: CCGT09T304 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.4 Special features Material: cemented carbide Grade: 5015 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-09T304-5015-Sandvik 40END
CCGT 09T308 -UM 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts CCGT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T308-UM1205-SANDVIK Facts / Figures: ISO-Code: CCGT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: 1205 Chip Breaker: -UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-09T308-1205-Sandvik 40END
CCGT 09T308 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet GT9530 performance, precise ISO compatibility and a 0.8 mm nose radius for consistent finishing results; order the inserts conveniently via Metav Werkzeuge or consult the team for application advice. CCGT 09T308 GT9530 CCGT — Turning insert (ISO), coated cermet, hole — Tungaloy CCGT09T308 GT9530 is an ISO rhombic turning insert designed for external and internal turning, delivering fine surface quality and extended life in stable steel machining conditions. Coated cermet GT9530 for finishing 0.8 mm nose radius for fine detail ISO rhombic form, 80° for versatility 7° clearance angle for secure cutting Cylindrical hole with countersink for clamping Higher productivity through a wear-resistant grade The combination of a coated cermet composition and the GT9530 grade targets finishing applications on steel, where surface quality and tool life matter. The coating increases resistance to abrasive wear while the substrate maintains edge strength, resulting in longer tool life and fewer interruptions for insert changes. This balance supports consistent cycle times and a reduced cost per part in production environments that favour stable set-ups. Secure clamping and straightforward holder compatibility Designed to the ISO turning insert standard, the rhombic, 80° geometry and the cylindrical hole with one-sided countersink (40°–60°) ensure repeatable seating and positive clamp engagement. The combination of 7° clearance and the insert’s thickness provides stable support in a matching holder. When the correct holder form, relief angle and tolerance class are used, the system delivers stable chip control and lower vibration for improved dimensional consistency. Practical application advice for reliable finishing This insert is intended primarily for external and internal turning where a smooth finish is required; choose the single-sided chipbreaker and grade combination that matches material and rigidity. In less rigid conditions or for roughing, select a more robust geometry; for finish passes, the 0.8 mm nose radius helps achieve finer edge detail and better surface integrity. The coated cermet excels in steady cutting situations and is particularly suitable when a premium surface and extended intervals between index changes are desired. Ordering, spare parts and integration into the tool system The insert forms part of a standard ISO insert system and requires a corresponding external holder, underlay/clamping set and replacement screws to complete the assembly. For procurement and stock keeping, note the manufacturer article details and SKU to ensure correct replacement items are selected. Technical data sheets and compatibility lists are available to confirm holder fitment, chipbreaker matching and recommended cutting strategies for specific steel grades. For finishing-focused turning tasks, request the GT9530 inserts from Metav Werkzeuge for tailored recommendations and local delivery — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997866 Manufacturer SKU: TUN6997866 Manufacturer article number: 6997866 Designation: CCGT09T308 Grade: GT9530 Cutting material: coated cermet Material: cemented carbide Core specifications Size: 09 Insert shape: rhombic, 80° Thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Features and applications Application: turning (external and internal) Chipbreaker: single-sided Compatibility: ISO turning insert system System components: insert, holder, underlay/clamping set, replacement screws FAQ What materials is this insert best suited for? This insert, the CCGT09T308 GT9530 from Tungaloy, is optimised for steel machining where a wear-resistant coated cermet delivers superior surface finish and extended life. Which holder features are required for correct clamping? A holder matching the ISO rhombic form, appropriate relief angle and correct tolerance class is required; the cylindrical hole with countersink ensures stable seat and clamp engagement. Is the 0.8 mm radius suitable for finishing operations? Yes— the 0.8 mm nose radius provides finer edge detail for finishing passes while the GT9530 grade preserves edge integrity during steady cutting. How does the single-sided chipbreaker influence performance? The single-sided chipbreaker is tuned for chip control during finishing; when combined with the coated cermet, it supports consistent chips and improved surface quality. What components complete the turning system for this insert? The system comprises the ISO insert, a compatible external holder or boring bar, an underlay/clamping set and the required replacement screws to secure the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T308 H13A Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features for indexable inserts CCGT 09T308 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT09T308UMH13A-SANDVIK Data/ Figures: ISO-Code: CCGT09T308 Clearance Angle: 7° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-09T308-H13A-Sandvik 40END
CCGT 09T308 IC20 Indexable Insert - ISCAR
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCGT 09T308 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT09T308-AFIC20 Facts for the tool: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING ALUMINUM Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCGT-09T308-IC20-ISCAR 40END
CCGT 09T308 IC20 Indexable Insert - ISCAR
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Specifications indexable inserts CCGT 09T308 from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT09T308-ASIC20 Facts and Figures: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING ALUMINUM Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCGT-09T308-IC20-ISCAR 40END
CCGT 09T308 Indexable Insert for Aluminium - MetavCUT
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Product specifications indexable inserts CCGT 09T308 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT09T308-Aluminium Data/ Figures: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-09T308-Aluminium-MetavCUT 40END
CCGT 09T308 Indexable Insert for Stahl - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications indexable inserts CCGT 09T308 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT09T308-Steel Facts for the tool: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-09T308-Stahl-MetavCUT 40END
CCGT 09T308 Indexable Insert for Stainless Steel - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for CCGT 09T308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT09T308-Stainless Facts for the tool: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-09T308-Stainless Steel-MetavCUT 40END
CCGT 09T308 K313 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts CCGT 09T308 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T308LF-K313-KENNAMETAL Figures for the tool: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: K313 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T308-K313-Kennametal 40END
CCGT 09T308 KC5010 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features CCGT 09T308 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T308LF-KC5010-KENNAMETAL Facts and Figures: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T308-KC5010-Kennametal 40END
CCGT 09T308 KC5010 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for inserts CCGT 09T308 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T308HP-KC5010-KENNAMETAL Facts & Figures: ISO-Code: CCGT09T308 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.8 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T308-KC5010-Kennametal 40END
CCGT 09T308 KC5025 Indexable Insert - Kennametal
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product details for CCGT 09T308 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T308LF-KC5025-KENNAMETAL ISO-Code: CCGT09T308 Grade: KC5025 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T308-KC5025-Kennametal 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com